In this study, we successfully demonstrate a carrier-injection InGaAsP variable optical attenuator (VOA) with a lateral P-I-N junction formed by Ni-InGaAsP alloy and Zn diffusion on a III-V on insulator (III-V-OI) wafer. The Ni-InGaAsP alloy for the n+ junction is formed by direct reaction between Ni and InGaAsP after annealing at 350°C. The p+ junction is formed by the Zn diffusion at 500°C using Zn doped spin-on glass (SOG). By both techniques, we successfully reduce the sheet and contact resistivity in the lateral P-I-N junction even with the relatively low-temperature process as compared with the P-I-N junction formed by conventional Si and Be ion implantation. By injecting carriers into the InGaAsP waveguide through the lateral P-I-N junction, we achieve the optical attenuation of -40 dB/mm with an injection current density of 40 mA/mm at a 1.55 μm wavelength.

A 44-year-old man developed sudden non-fluent aphasia and right hemiplegia due to left striatocapsular infarction (Figure). Neurologic examination revealed gaze deviation to the right with eyes closed, but not with eyes open (Video). There was no spontaneous or gaze-evoked nystagmus, even after elimination of visual fixation. Leftward pursuit was impaired in a craniotopic frame of reference, and horizontal saccades were hypometric in both directions. Head impulse test was normal in the horizontal plane and there were no visual field defects. The contralesional gaze deviation with eye closure persisted for ten days.

The presence of glutamine (Gln) in in vitro maturation (IVM) and in vitro culture (IVC) medium is a more potent factor for improving porcine oocyte and embryo development than other amino acids. However Gln is inherently unstable and spontaneously breaks down into ammonia, and therefore interferes with proper development. To avoid this adverse effect, Gln was replaced in the present study with its stable dipeptide derivative alanyl-glutamine (Ala-Gln) and the effects of this replacement on porcine IVM and IVC were evaluated. Replacement of Gln with Ala-Gln during IVM did not improve nuclear maturation, however numbers of early cleaved embryos were significantly increased after activation. Blastocyst formation rates were also significantly improved by using Ala-Gln during IVM. Replacement of Gln with Ala-Gln during IVC significantly increased total cell numbers in blastocysts. Blastocyst formation rate was also significantly higher when Ala-Gln was used in both IVM and IVC. In conclusion, the use of Ala-Gln rather than Gln gives better results for development in both porcine IVM and IVC.

Nitrogen (N) and boron (B) codoped diamond-like carbon (DLC) films were prepared on silicon oxide substrates by RF magnetron sputtering to optimize the electrical conductivity and hardness of DLC film. The electrical conductivity and hardness of the N–B codoped DLC films were controlled simultaneously by varying N2 flow rate with fixed B target power and varying B target power with fixed N2flow rate. The electrical resistivity of the B-doped DLC films showed a cup-shaped relationship with B target power and a U-shaped relationship with the N–B codoped DLC film. However, hardness of the B-doped DLC films showed a decreasing behavior but it was maintained almost constant for the N–B codoped DLC film. These particular electrical and hardness behaviors of the N–B codoped DLC films could be explained by a neutralization effect of N and B codoping.

Ca3−xSrxCo4O9 with different compositions (x=0, 0.15, 0.3, and 0.45) were synthesized from stoichiometric mixtures of Co3O4, CaCO3, and SrCO3, and their unit-cell parameters were determined. The powders were mixed with silicon standard powder, and XRD patterns were collected and analyzed using TOPAS. The compounds were determined to be monoclinic with space group of P2. Unit-cell parameters changed from a=4.8329(3) Å, b=4.5727(1) Å, c=10.8360(4) Å, and β=98.093(7)° when x=0, to a=4.8432(1) Å, b=4.6100(3) Å, c=10.8668(3) Å, and β=98.110(5)° when x=0.3. An unidentified second phase was observed when x=0.45.

In this study, we investigated the effect of two oxygen concentrations (5 and 20%) during in vitro maturation (IVM) and during in vitro culture (IVC) on porcine embryo development and analysed differences in gene expression between cumulus–oocyte complexes matured under 5 or 20% oxygen and the resulting blastocysts cultured under 5% or 20% oxygen following parthenogenetic activation. There was no significant difference in oocyte maturation rate. However, the numbers of resulting blastocysts were significantly increased in the 5% IVC group compared with the 20% IVC group. Moreover, the M20C5 treatment group (23.01%) supported greater blastocyst development compared with the M5C5 (14.32%), M5C20 (10.30%), and M20C20 (17.88%) groups. However, total cell numbers were not significantly different among groups. According to mRNA abundance data of multiple genes, each treatment altered the expression of genes in different patterns. GLUT1, G6PD and LDHA were up-regulated in cumulus cells that had been matured in low oxygen, suggesting a higher glucose uptake and an increase in anaerobic glycolysis, whereas cyclin B1 (CCNB) and MnSOD (Mn-superoxide dismutase) were upregulated in cumulus cells that had been matured in high oxygen, which suggests a higher activity of mitosis-promoting factor and antioxidant response. In spite of these differential effects on cumulus cells, oocytes could mature normally regardless of different oxygen concentrations. Therefore, it can be concluded that high oxygen concentration during in vitro maturation and low oxygen during in vitro culture may alter the expression of multiple genes related to oocyte competence and significantly improves embryo development (p < 0.05) but not blastocyst quality.

The oocyte is known from recent studies in the mouse, cow, sheep and human to be a central regulator of follicular cell function. However, in the pig, little information is known about the regulation of cumulus expansion by oocyte-secreted factors and oocyte quality. We investigated the possible effects of oocyte-secreted factors during in vitro maturation on cumulus expansion and on porcine oocytes as judged by subsequent embryonic development after parthenogenetic activation. Cumulus–oocyte complexes (COC) from antral follicles of pig ovaries collected from a local abattoir were divided into control and treatment groups and were cultured in tissue culture medium 199 supplemented with follicle-stimulating hormone. Treatment groups consisted of increasing numbers of denuded oocytes (DO) co-cultured with COC (at ratios of COC to DO of 1:1, 1:2, 1:3, 1:4 and 1:5). After incubation for 44 h, cumulus expansion and maturation rates were assessed and oocytes were activated parthenogenetically. Cumulus expansion in the 1 COC:4 DO and 1 COC:5 DO groups was low and altered because full dispersion of the outer layer did not occur. Cell viability was not affected, as measured by the automated cell counter, but scanning electron microscopy revealed only a scanty extracellular matrix. Blastocyst rate was significantly higher in the 1 COC:4 DO (34.4%) and in the 1 COC:5 DO (34.9%) groups (p < 0.05) when compared with other groups. Maturation rate, cleavage rate and total cell number showed no significant difference between control and treatment groups. Amplification by reverse transcription polymerase chain reaction (RT-PCR) showed up-regulation of growth differentiation factor 9 (GDF9) in the cumulus cells in the 1 COC:4 DO group at 44 h. We conclude that denuded porcine oocytes could improve the maturation of COC as evidenced by increased blastocyst development in the 1 COC:4 DO, even though cumulus expansion was poor. This improvement could be a result of the GDF9 up-regulation.

The effects of tannic acid (TA) supplementation (0·02 %, wt/wt) were compared with the effects of clofibrate (CF) supplementation (0·02 %, wt/wt) in apo E-deficient (apo E− / −) mice fed a AIN-76 semi-synthetic diet (normal diet) over 20 weeks. The mice were monitored for the modulation of hepatic mRNA expression and the activities of lipid-regulating enzymes. Both TA and CF supplementation lowered hepatic 3-hydroxy-3-methyl-glutaryl-CoA reductase (HMGR) activity and prevented atherosclerotic lesion formation in comparison with the control group. Hepatic carnitine palmitoyl transferase and β-oxidation activities were significantly higher in the TA and CF groups than in the control group. Both CF and TA supplementation resulted in significant decreases in hepatic HMGR mRNA levels in association with its enzyme activity. However, in contrast to CF supplementation, TA supplementation seemed to decrease the accumulation of hepatic lipids in the apo E− / − mice without increasing liver weight. These results suggest that the overall effect of TA is more desirable than CF for the alleviation of hepatic lipogenesis and atherogenesis in apo E− / − mice.

In non-human primates, it is difficult to collect sufficient numbers of oocytes for producing identical embryos by somatic cell nuclear transfer (SCNT). Because of this factor, inter-species SCNT (iSCNT) using heterospecific oocytes is an attractive alternative approach. The objective of this study was to produce iSCNT-derived blastocysts using enucleated cow (Bos taurus) metaphase II oocytes and adult rhesus monkey (Macaca mulatta) fibroblasts. Ear skin tissue from a 6-year-old male rhesus monkey was collected by biopsy and fibroblasts were isolated. Immature cumulus–oocyte complexes from cow ovaries were collected and matured in vitro in Medium 199. The enucleated oocytes were reconstructed with rhesus monkey fibroblasts and iSCNT embryos were cultured in modified synthetic oviduct fluid in an atmosphere of 5–5.5% CO2 under various conditions (37–39 °C and 5–20% O2) to examine the effects of in vitro culture conditions. Most embryos were arrested at the 8- or 16-cell stage and only three blastocysts were derived in this way using iSCNT from a total of 1153 cultured activated embryos (0.26% production rate). Two of the three blastocysts were used for counting nuclear numbers using bisbenzimide staining, which were 51 and 24. The other iSCNT-derived blastocyst was used to analyse mitochondrial DNA (mtDNA) by PCR, and both rhesus monkey and cow mtDNA were detected. Although the development rate was extremely low, this study established that iSCNT using two phylogenetically distant species, including a primate, could produce blastocysts. With improvements in the development rate, it may be possible to produce rhesus monkey iSCNT-derived embryonic stem cell lines for studies on primate nucleus and cow mitochondria interaction mechanisms.

This study investigated the relationships of three major aquatic assemblages (diatom, macroinvertebrate, and fish) and environmental variables, including sub-basin, hydrology, land cover, and water quality variables on multiple scales. Samples were collected at 720 sampling sites on the Korean nationwide scale. Geological variables, including altitude and slope, showed a strong positive correlation with proportions of forest in land cover types and cobbles in substrates, while they were negatively correlated with water quality variables, including conductivity and total phosphorus. Considering the concordance of the different assemblages, species richness of fish and macroinvertebrates displayed significant correlation, and diatoms were significantly correlated with fish. However, diatoms did not show significant correlation with macroinvertebrates. Altitude and slope showed significant correlation with all biological variables of the three assemblages. Macroinvertebrates and fish showed positive relations with large substrate sizes. Indices of diatoms and macroinvertebrates well reflected the perturbation of water quality variables. However, fish indices showed a relatively low association with water quality variables, compared with those of diatoms and macroinvertebrates. These patterns were also confirmed by the ordination and prediction of biological indices with environmental variables through the learning process of a self-organizing map as well as random forest. Overall, our study supports the concept of multi-scale habitat filters and functional organization in streams, and is consistent with the recommended use of multiple biological indices with more than one assemblage for the assessment of the biotic integrity of aquatic ecosystems.

Anthropogenic land use within watersheds has substantial effects on aquatic habitats and biological communities. From September 2006 to December 2008, we investigated the effects of land use on benthic macroinvertebrate communities by comparing Song Stream and Odae Stream, two adjacent mountain streams in Korea whose watersheds have different land use patterns. Song Stream is significantly disturbed by agricultural activities in the watershed, whereas Odae Stream is relatively undisturbed and is surrounded by a well-conserved forest area. Song Stream had significantly higher levels of all nutrients and sediment-related factors due to the adjacent agricultural area. As a result, Song Stream had markedly lower species community indices, such as taxa richness and abundance. In Song Stream, macroinvertebrate scrapers and predators were most adversely affected, whereas collector-gatherers became a dominant group. Based on correlation and multivariate analyses, total dissolved solids had the strongest negative relationship with macroinvertebrate assemblages, followed by electrical conductivity, total nitrogen, and pH. The proportion of cobble in stream substrate was positively related to the richness and abundance of macroinvertebrates. Our results indicate that disturbances caused by agricultural land use, particularly sand deposition, had significant adverse effects on macroinvertebrate habitats and on the biotic integrity of benthic macroinvertebrate communities.

Treatment with 6-dimethylaminopurine (6-DMAP) or demecolcine (DE) for several (at least 2) hours after artificial activation is known to improve in vitro development of porcine embryos. However, several reports have also shown that treatments with these chemicals induce apoptosis. The aim of this study was to find out whether short-term treatment with 6-DMAP and DE combined with electrical or thimerosal/dithiothreitol (Thi/DTT) activation had a beneficial effect on development of parthenogenetically activated porcine oocytes. We additionally treated embryos with 6-DMAP (2 mM) and/or DE (0.4 μg/ml) for a short time (40 min) after an electrical pulse (EP) or Thi/DTT. As a result, short-term treatment with 6-DMAP and DE successfully induced development of electrically or Thi/DTT-activated porcine parthenogenetic embryos with no significant difference in cleavage rate, blastocyst formation rate and total cell number compared with long-term treatment. To find optimal activation protocol, cleavage rate, blastocyst formation rate and total cell number were compared between EP and Thi/DTT treatments. Thi/DTT + 6-DMAP + DE showed significantly higher blastocyst formation rate (36.1 ± 3.5%) and total cell number (46.9 ± 1.0) than other groups (EP + 6-DMAP + DE, EP + Thi/DTT + 6-DMAP + DE: 23.3 ± 3.0%, 42.2 ± 1.1 and 17.2 ± 2.7%, 36.7 ± 1.5, respectively). In conclusion, this study demonstrates that short-term treatment with 6-DMAP and DE is as effective as the standard long-term treatment and Thi/DTT + 6-DMAP + DE exerts a synergistic effect.

The hydrophobicity of poly Si is reported to introduce different polishing behavior with careful control of post CMP cleaning process. The purpose of this study was to investigate the effect of poly Si wettability on its CMP behavior. The adhesion force of polymeric particle on the poly Si wafer surfaces was measured in the KOH solution (pH 11) as a function of solution A concentration. Adhesion force decreased and saturated as a function of concentration of solution A. The change of surface wettability affects not only the polishing rates but also the level of contamination on wafer because the interactions between particles and substrates are dependent on the wettability of the surface. Also, hydrophobic poly Si surfaces attracted much more pad particles with water marks than hydrophilic

We present the formation of SnO2-In2O3 hetero nanostructures. Kinetically, SnO2 nanowires form prior to the heterostructure. In2O3shell was regularly distributed on the SnO2 nanowire surface, and form sheath subsequently. We theoretically explained the morphological evolution of an anisotropic heterostructure such as core-sheath structure.

The purpose of this study was to characterize KOH based electrolytes and effects of additives on electro-chemical mechanical planarization. The electrochemical mechanical polisher was made to measure the potentiodynamic curve and removal rate of Cu. The potentiodynamic curves were measured in static and dynamic states in investigated electrolytes using a potentiostat. Cu disk of 2 inch was used as a working electrode and Pt electroplated platen was used as a counter electrode. KOH was used as the electrolyte. H2O2 and citric acid were used as additives for the ECMP of Cu. In static and dynamic potentiodynamic measurements, the corrosion potential decreased and corrosion current increased as a function of KOH concentration. In dynamic state, different potentiodynamic curve was obtained when compared to the static state. The current density did not decrease in passivation region by mechanical polishing effect. The static etch and removal rate were measured as function of KOH concentration and applied voltage. In ECMP system, polishing was performed at 30 rpm and 1 psi. The removal rate was about 60 nm/min at 0.3 V when 5 wt% KOH was used. Also, the effect of additive was investigated in KOH based electrolyte on removal rates. As a result, The removal rate was increased to 350 nm/min when 5wt% KOH, 5vol% H2O2, 0.3 M citric acid were used.

In this study, Ruthenium (Ru) chemical mechanical planarization (CMP) slurry was studied and developed to apply it for the formation of Ru bottom electrode in DRAM capacitor. An acidic chemical was chosen as both oxidant and etchant. The effects of the chemical on polishing and etching behavior were investigated as functions of chemical concentration and pHs. The static etch rate of Ru increased with increase of chosen chemical concentration. Also, thin Ru oxide was generated in chemical solution. The highest etching and removal rate were obtained in slurry of pH 6. Ru over etching was generated due to the high etch rate of Ru, and then good planarity was not obtained. However, because Ru over etching was prevented due to low etch rate of Ru, the plarnarity and isolation of each capacitor in slurry of pH 9 was acquired successfully.