Residual stress is generally evaluated using indentation by comparing the indentation curves of stressed and stress-free states. Here, we suggest a new method that can evaluate surface residual stress without indentation testing on stress-free specimen using stress-independent indentation parameters and an analysis of indentation contact morphology for the stress-free state. We found that several indentation parameters are independent of the stress by Vickers indentation testing on various stress states. The indentation contact morphology can be represented by indentation parameters including stress-independent ones, and by applying the stress-independent parameters obtained from the stressed state to the indentation contact depth function, we can estimate an indentation curve for stress-free state. The estimated curve matches well with the experimental stress-free indentation curve, and it was also confirmed that the applied stress values evaluated by comparing the estimated curve with the stressed indentation curve agree well with the reference values obtained from strain gauge.

We suggest a new method to evaluate stress directionality, the ratio of principal stresses, using nanoindentation by introducing a modified Berkovich indenter that is extended in one direction from the Berkovich indenter. In a nonequibiaxial stress state, the indentation load-depth curves are shifted differently as the extended axis of the indenter is placed in accordance with each principal direction. The indentation load-difference is proportional to each principal stress and the slopes are defined by the normal and parallel conversion factors whose ratio is constant at 0.58. The suggested method was verified by indentation tests using five nonequibiaxial stressed specimens. The evaluated stress directionality results show agreement with the applied reference values within ±20%. Furthermore, we calculated the conversion factor ratios for other modified Berkovich indenters extended to different degrees through finite element analysis and confirmed that the conversion factor ratio was inversely proportional to the extension of the modified Berkovich indenter.

The effects of polymer substrates on the interfacial structure and the thermal stability of Ga-doped ZnO (GZO) thin films were investigated. The GZO thin films were deposited on polyethylene terephthalate (PET) and polyethylene naphthalate (PEN) substrates by rf-magnetron sputtering at room temperature, and thermal stability tests of the GZO thin films on the polymer substrates were performed at 150°C up to 8 h in air. Electrical and structural characterizations of the GZO thin films on the PET and the PEN substrates were carried out, and the origins of the stable interfacial structure and the improved thermal stability of the GZO thin film on the PEN substrate were discussed.

We previously demonstrated that the chronic consumption of a high-fat diet (HFD) promotes lung and liver metastases of 4T1 mammary carcinoma cells in obesity-resistant BALB/c mice. To examine early transcriptional responses to tumour progression in the liver and lungs of HFD-fed mice, 4-week-old female BALB/c mice were divided into four groups: sham-injected, control diet (CD)-fed; sham-injected, HFD-fed (SH); 4T1 cell-injected, CD-fed (TC); 4T1 cell-injected, HFD-fed (TH). Following 16 weeks of either a CD or HFD, 4T1 cells were injected into the mammary fat pads of mice in the TC and TH groups and all mice were continuously fed identical diets. At 14 d post-injection, RNA was isolated from hepatic and pulmonary tissues for microarray analysis of mRNA expression. Functional annotation and core network analyses were conducted for the TH/SH Unique gene set. Inflammation in hepatic tissues and cell mitosis in pulmonary tissues were the most significant biological functions in the TH/SH Unique gene set. The biological core networks of the hepatic TH/SH Unique gene set were characterised as those genes involved in the activation of acute inflammatory responses (Orm1, Lbp, Hp and Cfb), disordered lipid metabolism and deregulated cell cycle progression. Networks of the pulmonary Unique gene set displayed the deregulation of cell cycle progression (Cdc20, Cdk1 and Bub1b). These HFD-influenced alterations may have led to favourable conditions for the formation of both pro-inflammatory and pro-mitotic microenvironments in the target organs that promote immune cell infiltration and differentiation, as well as the infiltration and proliferation of metastatic tumour cells.

We present experimental evidence of enhancement of thermoelectric properties in tellurium (Te) nanoparticle-embedded bismuth antimony telluride (BiSbTe) alloys. Bi0.5Sb1.5Te3 films with a high density of Te particles of 10–20 nm size were prepared by growth of alternating multilayers of ultrathin Te and Bi0.5Sb1.5Te3. As the amount of Te nanoinclusions increased up to ∼15%, the Seebeck coefficient and thermoelectric power factor were increased. Based on the concept of band bending at heterointerfaces as a carrier energy filter, the energy relaxation calculation was made to confirm that the Te nanoinclusions result in a carrier energy filtering effect in p-type bismuth antimony telluride. In addition, thermal conductivities were reduced in the Te-embedded samples, permitting possible further enhancement of the thermoelectric figure of merit. The advantages of Te nanoinclusions in p-type Bi0.5Sb1.5Te3alloys on thermoelectric performance are experimentally realized by both electron- and phonon scattering.

During the self-annealing in the copper electrodeposits for the copper metallization, an in-situ observation of grain growth of the copper at room temperature was performed by using EBSD (electron backscatter diffraction). The thin film structure of the copper electrodeposits after annealing was columnar. New twin was initiated at the front surface of growing twin and grew along the normal direction of the twin boundary between the new and parent twins. It was confirmed that the annealing twin in the copper electrodeposits during the self-annealing have an {111} growth front surface.

Surface roughness of ITO (Indium Tin Oxide) was measured by AFM (Atomic Force Microscope) and the existence of spikes was verified. Then OLED (Organic Light Emitting Diode) devices made from those substrates were fabricated and their electrical properties were measured with an I-V measurement system. There is considerable difference in the reverse leakage current of OLEDs depending on the surface roughness of the substrate. We observed a good correlation of reverse leakage current with Rpv (Peak-to-Valley roughness), but the correlations between reverse leakage current and Ra (Average roughness) and Rrms (Root-Mean-Square roughness) are not as good.

We have fabricated the a-Si:H film for pixel region and poly-Si film for driver region on the same glass substrate by a rapid thermal process successfully. By employing the halogen lamp, the considerable amount of hydrogen in the PECVD a-Si:H film, which causes the undesirable film ablation due to hydrogen evolution during excimer laser annealing, could be reduced selectively in the peripheral driver area where the a-Si:H film is recrystallized into poly-Si film in order to obtain the high mobility. After rapid thermal annealing, the hydrogen content in a-Si:H films, of which the inherent hydrogen content was found to be about 10–12 at. %, is successfully reduced to less than 5 at. %. The annealing conditions for dehydrogenation are 500, 550, 600 and 650 °C with various halogen lamp irradiation period which are below the point of the glass shrinkage. It should be noted that after rapid thermal annealing, any physical damage in the glass substrate has not been observed.