Few studies have evaluated the joint effect of trace elements on spontaneous preterm birth (SPTB). This study aimed to examine the relationships between the individual or mixed maternal serum concentrations of Fe, Cu, Zn, Se, Sr and Mo during pregnancy, and risk of SPTB. Inductively coupled plasma MS was employed to determine maternal serum concentrations of the six trace elements in 192 cases with SPTB and 282 controls with full-term delivery. Multivariate logistic regression, weighted quantile sum regression (WQSR) and Bayesian kernel machine regression (BKMR) were used to evaluate the individual and joint effects of trace elements on SPTB. The median concentrations of Sr and Mo were significantly higher in controls than in SPTB group (P < 0·05). In multivariate logistic regression analysis, compared with the lowest quartile levels of individual trace elements, the third- and fourth-quartile Sr or Mo concentrations were significantly associated with reduced risk of SPTB with adjusted OR (aOR) of 0·432 (95 CI < 0·05). In multivariate logistic regression analysis, compared with the lowest quartile levels of individual trace elements, the third- and fourth-quartile Sr or Mo concentrations were significantly associated with reduced risk of SPTB with adjusted aOR of 0·432 (95 % CI 0·247, 0·756), 0·386 (95 % CI 0·213, 0·701), 0·512 (95 % CI 0·297, 0·883) and 0·559 (95 % CI 0·321, 0·972), respectively. WQSR revealed the inverse combined effect of the trace elements mixture on SPTB (aOR = 0·368, 95 % CI 0·228, 0·593). BKMR analysis confirmed the overall mixture of the trace elements was inversely associated with the risk of SPTB, and the independent effect of Sr and Mo was significant. Our findings suggest that the risk of SPTB decreased with concentrations of the six trace elements, with Sr and Mo being the major contributors.

The mixing of immiscible oil and water by a pitched blade turbine in a cylindrical vessel is studied numerically. Three-dimensional simulations combined with a hybrid front-tracking/level-set method are employed to capture the complex flow and interfacial dynamics. A large eddy simulation approach, with a Lilly–Smagorinsky model, is employed to simulate the turbulent two-phase dynamics at large Reynolds numbers $Re=1802{-}18\ 026$. The numerical predictions are validated against previous experimental work involving single-drop breakup in a stirred vessel. For small $Re$, the interface is deformed but does not reach the impeller hub, assuming instead the shape of a Newton's Bucket. As the rotating speed increases, the deforming interface attaches to the impeller hub which leads to the formation of long ligaments that subsequently break up into small droplets. For the largest $Re$ studied, the system dynamics becomes extremely complex wherein the creation of ligaments, their breakup and the coalescence of drops occur simultaneously. The simulation outcomes are presented in terms of spatio-temporal evolution of the interface shape and vortical structures. The results of a drop size analysis in terms of the evolution of the number of drops, and their size distribution, is also presented as a parametric function of $Re$.

We consider the mixing dynamics of an air–liquid system driven by the rotation of a pitched blade turbine (PBT) inside an open, cylindrical tank. To examine the flow and interfacial dynamics, we use a highly parallelised implementation of a hybrid front-tracking/level-set method that employs a domain-decomposition parallelisation strategy. Our numerical technique is designed to capture faithfully complex interfacial deformation, and changes of topology, including interface rupture and dispersed phase coalescence. As shown via transient, a three-dimensional (3-D) LES (large eddy simulation) using a Smagorinsky–Lilly turbulence model, the impeller induces the formation of primary vortices that arise in many idealised rotating flows as well as several secondary vortical structures resembling Kelvin–Helmholtz, vortex breakdown, blade tip vortices and end-wall corner vortices. As the rotation rate increases, a transition to ‘aeration’ is observed when the interface reaches the rotating blades leading to the entrainment of air bubbles into the viscous fluid and the creation of a bubbly, rotating, free surface flow. The mechanisms underlying the aeration transition are probed as are the routes leading to it, which are shown to exhibit a strong dependence on flow history.

Hepatitis B virus-related acute-on-chronic liver failure (HBV-ACLF) is a severe and life-threatening complication, characterised by multi-organ failure and high short-term mortality. However, there is limited information on the impact of various comorbidities on HBV-ACLF in a large population. This study aimed to investigate the relationship between comorbidities, complications and mortality. In this retrospective observational study, we identified 2166 cases of HBV-ACLF hospitalised from January 2010 to March 2018. Demographic data from the patients, medical history, treatment, laboratory indices, comorbidities and complications were collected. The mortality rate in our study group was 47.37%. Type 2 diabetes mellitus was the most common comorbidity, followed by alcoholic liver disease. Spontaneous bacterial peritonitis, pneumonia and hepatic encephalopathy (HE) were common in these patients. Diabetes mellitus and hyperthyroidism are risk factors for death within 90 days, together with gastrointestinal bleeding and HE at admission, HE and hepatorenal syndrome during hospitalisation. Knowledge of risk factors can help identify HBV-ACLF patients with a poor prognosis for HBV-ACLF with comorbidities and complications.

The Cambrian successions at the Chihuarruita Hill outcrop, Sonora, Mexico, have yielded two successive linguliform brachiopod assemblages that are transitional between Cambrian Stage 4 and the newly recognized global Wuliuan Stage. The lowermost assemblage includes Dictyonina sp., Paterina sp., Eothele sp., Hadrotreta rara? (Cooper), and Linnarssonia arellanoi? (Cooper), coming from the upper part of the Buelna Formation. The younger, recently named El Gavilán Formation contains a more diverse linguliform brachiopod assemblage, including Acrothele concava Cooper, Batenevotreta? mexicana n. sp., Dictyonina minutipuncta Cooper, Eothele sp., Eoobolus sp., Hadrotreta rara? (Cooper), Linnarssonia arellanoi? (Cooper), Micromitra sp., Paterina sp., and Prototreta sp. The El Gavilán Formation contains a diverse trilobite fauna suggesting Delamaran age in terms of the Laurentian regional stratigraphical scheme. The base of the global Wuliuan Stage and Miaolingian Series is defined by the first occurrence of Oryctocephalus indicus; in the absence of the index species, the base should be provisionally placed at the base of the El Gavilán Formation. The Wuliuan age of the brachiopod assemblage recovered from the El Gavilán Formation is supported by the occurrence of Acrothele in the Cambrian biostratigraphical succession of Himalaya, where the genus makes its first appearance in the Kaotaia prachina Zone. In addition, the co-occurrences of Acrothele and Eothele can be taken as an indication of the Wuliuan age of the fauna. A new biogeographic analysis confirms that the Eothele Fauna first appeared at the end of Cambrian Stage 4, as a result of increased faunal migration within the southern tropical latitudes directed from Australasian Gondwana to Laurentia.

UUID: http://zoobank.org/6598f51f-cb07-4df3-bd1f-025a13e64edf

Inhibitory control can be divided into motor and cognitive inhibition. The current research is the first study exploring the impact of brief mindfulness training on motor inhibition, measured by a stop signal task in participants without any meditation experience. Motor inhibition performance was compared before and immediately after three different conditions; a brief mindfulness induction, a resting state and an active control session in which participants listened to their favorite music. Post-test learning effect on go-reaction times was seen for the resting and mindfulness conditions, but was absent in the music session, possibly due to emotional arousal might have led slower responses. Brief mindfulness training did not significantly alter inhibitory control, although marginal improvement in stop signal reaction time following the mindfulness induction was observed. Motor inhibition appears unresponsive to either short-term or long-term mindfulness practice. Future mindfulness studies should explore a broad spectrum of cognitive functions and populations.

Let $\{M_{n}\}_{n=1}^{\infty }$ be a sequence of expanding matrices with $M_{n}=\operatorname{diag}(p_{n},q_{n})$, and let $\{{\mathcal{D}}_{n}\}_{n=1}^{\infty }$ be a sequence of digit sets with ${\mathcal{D}}_{n}=\{(0,0)^{t},(a_{n},0)^{t},(0,b_{n})^{t},\pm (a_{n},b_{n})^{t}\}$, where $p_{n}$, $q_{n}$, $a_{n}$ and $b_{n}$ are positive integers for all $n\geqslant 1$. If $\sup _{n\geqslant 1}\{\frac{a_{n}}{p_{n}},\frac{b_{n}}{q_{n}}\}<\infty$, then the infinite convolution $\unicode[STIX]{x1D707}_{\{M_{n}\},\{{\mathcal{D}}_{n}\}}=\unicode[STIX]{x1D6FF}_{M_{1}^{-1}{\mathcal{D}}_{1}}\ast \unicode[STIX]{x1D6FF}_{(M_{1}M_{2})^{-1}{\mathcal{D}}_{2}}\ast \cdots \,$ is a Borel probability measure (Cantor–Dust–Moran measure). In this paper, we investigate whenever there exists a discrete set $\unicode[STIX]{x1D6EC}$ such that $\{e^{2\unicode[STIX]{x1D70B}i\langle \unicode[STIX]{x1D706},x\rangle }:\unicode[STIX]{x1D706}\in \unicode[STIX]{x1D6EC}\}$ is an orthonormal basis for $L^{2}(\unicode[STIX]{x1D707}_{\{M_{n}\},\{{\mathcal{D}}_{n}\}})$.

Mindfulness and anxiety are often linked as inversely related traits and there have been several theoretical and mediational models proposed suggesting such a relationship between these two traits. The current review report offers an account of self-report measures, behavioral, electrophysiological, hemodynamic, and biological studies, which provide converging evidence for an inverse relationship between mindfulness and anxiety. To our knowledge, there are no comprehensive accounts of empirical evidence that investigate this relationship. After reviewing several empirical studies, we propose a schematic model, where a stressor can trigger the activation of amygdala which activates the hypothalamic–pituitary–adrenal (HPA) pathway. This hyperactive HPA axis leads to a cascade of psychological, behavioral, electrophysiological, immunological, endocrine, and genetic reactions in the body, primarily mediated by a sympathetic pathway. Conversely, mindfulness protects from deleterious effects of these triggered reactions by downregulating the HPA axis activity via a parasympathetic pathway. Finally, we propose a model suggesting a comprehensive scheme through which mindfulness and anxiety may interact through emotion regulation. It is recommended that future mindfulness intervention studies should examine a broad spectrum of measurement indices where possible, keeping logistic feasibility in mind and look at mindfulness in conjunction with anxiety rather than independently.

A simple and facile stereolithography 3D printing technique was utilized to fabricate piezoelectric photopolymer-based polyvinylidene fluoride (PVDF) blends. Different process variables, such as solvent (N,N-dimethylformamide, DMF) to PVDF ratio and PVDF solution to photopolymer resin (PR) ratio, were engineered to enhance the dispersion of the PVDF into the PR so as to achieve the maximum piezoelectric coupling coefficient. Our results demonstrate that a ratio of 1:10 (PVDF:DMF) and 2 wt%-PVDF/PR was optimal for the best dissolution of the PVDF, 3D printability, and piezoelectric properties. Under these conditions, the blend generated ±0.121 nA under 80 N dynamic loading excitation. We believe that the findings of this work would promote many further studies on the mass production of flexible piezoelectric polymer blends with higher quality finished surface and design flexibility.

Direct determination of barrier height (ΦBH) value between Ir and single crystal (001) hydrogen-terminated diamond with lightly boron doped has been performed using x-ray photoelectron spectroscopy technique. 70 nm Ir islands were formed on hydrogen-terminated diamond surface using anodic aluminum oxide. The ΦBH value for Ir/hydrogen-terminated diamond was −0.43 ± 0.14 eV, indicating that Ir was a suitable metal for ohmic contact with hydrogen-terminated diamond. The band diagram of Ir/hydrogen-terminated diamond was obtained. The experimental ΦBH was compared with the theoretical ΦBH in this work.

Multiwall carbon nanotubes (MWCNTs) are utilized to resolve low coupling coefficient issue by dispersing MWCNTs in poly(vinylidene fluoride) matrix to create stress reinforcing network, dispersant, and electron conducting functions for barium titanate (BT) nanoparticles. Various BT and MWCNT percentages of nanocomposite film are fabricated by FDM three-dimensional (3D) printing which can simplify the fabrication process as well as lower cost and design flexibility. Increasing MWCNTs and BT particles gradually increase piezoelectric coefficient (d 31) by 0.13 pC/N with 0.4 wt%-MWCNTs/18 wt%-BT. These results provide not only a technique to print piezoelectric nanocomposites but also unique materials combination for sensor application.

Population decline among Asian horseshoe crabs in Asia is increasingly reported, but knowledge of their population and ecological status in China is limited. We conducted community interviews in 30 fishing villages around Beibu Gulf in Guangxi, China, to collect distribution information about the potential spawning/nursery grounds of Tachypleus tridentatus and Carcinoscorpius rotundicauda, and any imminent threats to their populations. Based on the results from 400 respondents we identified 45 potential spawning/nursery grounds distributed widely along the shores of Beibu Gulf. We visited 10 of these sites and verified the presence of juvenile horseshoe crabs by field surveys. Nearly all respondents reported an overall depletion in horseshoe crab populations from these 45 sites, which they attributed mainly to unsustainable fishing practices. Respondents who reported having seen horseshoe crab mating pairs on shores were mostly older people, which may suggest a considerable reduction in horseshoe crabs coming to the shores to spawn in recent years. The mean daily harvest of adult T. tridentatus offshore, as indicated by fishers, has declined from c. 50–1,000 in the 1990s to 0–30 individuals during 2011–2016. Our Wisdom of Crowds approach, supported by confirmatory field surveys, is a cost-effective method for assessing the population status of horseshoe crabs, and the level of threat they face. Similar approaches with other species are likely to be particularly valuable in the Asia–Pacific region, where well-structured population monitoring is largely unaffordable.

The increasing demand for energy storage devices has propelled research for developing efficient super-capacitors (SC) with long cycle life and ultrahigh energy density. Carbon-based materials are commonly used as electrode materials for SC. Herein, we report a new approach to improve the SC performance utilizing a Porous Carbon/Cerium Oxide nanoparticle (PC-CON) hybrid as electrode material synthesized via a low temperature hydrothermal method. Through this approach, charges can be stored not only via electrochemical double layer capacitance (EDLC) from PC but also through pseudo-capacitive effect from CeO2 nanoparticles (NPs). The electrode-electrolyte interaction due to the electrochemical properties of the electrolyte provides an enhanced voltage window for the SC. Scanning Electron Microscopy (SEM), Transmission Electron Microscopy (TEM), X-ray Photoelectron Spectroscopy (XPS), and X-Ray Diffraction (XRD) measurements were used for the characterization of this PC/CeO2 hybrid material system. The testing results have shown that a maximum of 500% higher specific capacitance could be obtained using PC/CeO2 instead of using PC only.

Carbon based materials have long been investigated as anodes for lithium ion batteries. Among these materials, porous carbon holds several advantages such as high stability, high specific surface area, and excellent cycling capability. To further enhance the energy storage performance, ceramic nanomaterials have been combined with carbon based materials as hybrid anodes for enhanced specific capacity. The use of metal oxide ceramic nanomaterials could enhance the surface electrochemical reactivity thus leads to the increasing of capacity retention at higher number of cycles. In this research, we synthesized ceria (CeO2) nano-particles on porous carbon to form inorganic-organic hybrid composites as an anode material for Li-ion battery. The high redox potential of ceria is expected to increase the specific capacity and energy density of the system. The electrochemical performance was determined by a battery analyzer. It is observed that the specific capacity could be improved by 77% using hybrid composites anode. The material morphology, crystal structure, and thermal stability were characterized by Scanning Electron Microscopy (SEM), Transmission Electron Microscopy (TEM), X-Ray Diffraction (XRD), and Thermogravimetric Analysis (TGA).

P-type Cu1.8+xSe (x = 0, 0.16, 0.20) compounds were synthesized by mechanical alloying and spark plasma sintering technique. A 100% enhancement of the Seebeck coefficient was achieved in the whole temperature interval for x = 0.16 and x = 0.20 bulks compared with that of the x = 0 bulk. The thermal conductivity was all below 1.6 W m−1 K−1 in the whole temperature interval for x = 0.16 and x = 0.20 bulks, showing a pronounced reduction compared with that of the x = 0 bulk. The lowest thermal conductivity 0.69 W m−1 K−1 was achieved in the x = 0.16 sample at 773 K, whereby a maximum ZT value of 1.23 was obtained, revealing that optimizing Cu content in Cu1.8+xSe system is an effective method to improve the thermoelectric (TE) merit and indicating a great potential for TE application along with their nontoxicity and low cost.

In this paper, we analyze the special security requirements for software support in health care and the HealthAgents system in particular. Our security solution consists of a link-anonymized data scheme, a secure data transportation service, a secure data sharing and collection service, and a more advanced access control mechanism. The novel security service architecture, as part of the integrated system architecture, provides a secure health-care infrastructure for HealthAgents and can be easily adapted for other health-care applications.

CdS nanocrystals embedded in sodium borosilicate glass were synthesized through sol-gel process. The CdS nanocrystals were usually 10 to 20 nm in size. The microstructure of CdS nanocrystals was determined to be of the hexagonal phase. The morphology and microstructure of the glass were examined using diverse techniques including scanning-probe microscopy (SPM), x-ray photoelectron spectroscopy (XPS), transmission electron microscopy (TEM), scanning transmission electron microscopy (STEM), energy dispersion x-ray spectra (EDAX), and high-resolution TEM (HRTEM). The linear optical absorption spectrum of the glass showed a blue shift as a result of quantum-size effect. Furthermore, the third-order optical nonlinearities of the glass were studied by Z-scan technique at a wavelength of 770 nm. The results showed that the third-order optical nonlinear refractive index γ, absorption coefficient β, and susceptibility χ(3) were determined to be −2.16 × 10−16 m2/W, 6.32 × 10−11 m/W, and 1.20 × 10−10 esu, respectively, which were greater than those reported previously for CdS nanocrystals embedded in different matrices.

Based on quantitative trait locus (QTL) mapping, the gene for porcine uncoupling protein 3 (UCP3) was chosen as a candidate gene for pig fat deposition and meat quality traits. In this study, a partial coding region of the UCP3 gene was sequenced and one single nucleotide polymorphism (cSNP) was found at 395 bp. The mutation was G→A and resulted in the amino acid change from glycine to arginine. This site was also recognized by restriction endonuclease SmaI. The UCP3 SmaI polymorphism was analysed among 186 individuals of Large White×Meishan F2 progeny using polymerase chain reaction–restriction fragment length polymorphism (PCR-RFLP). The genotypes of the UCP3 SmaI polymorphism were AA, AB and BB. The frequency of A and B alleles was respectively 0.56 and 0.44. Statistical analyses showed that the SmaI polymorphism in the F2 population was significantly associated with back-fat thickness at thorax–waist and buttock, as well as with intramuscular fat, drip-loss rate and water-holding capacity. The additive effect of UCP3 SmaI was clearly shown. The genotype AA reduced back-fat thickness and drip-loss rate, increased water-holding capacity, and decreased the intramuscular fat. The effect of the pig UCP3 SmaI polymorphism needs to be analysed in other populations using larger samples.