The biological ankle dorsiflexes several degrees during swing to provide adequate clearance between the foot and ground, but conventional energy storage and return (ESR) prosthetic feet remain in their neutral position, increasing the risk of toe scuffs and tripping. We present a new prosthetic ankle intended to reduce fall risk by dorsiflexing the ankle joint during swing, thereby increasing the minimum clearance between the foot and ground. Unlike previous approaches to providing swing dorsiflexion such as powered ankles or hydraulic systems with dissipative yielding in stance, our ankle device features a spring-loaded linkage that adopts a neutral angle during stance, allowing ESR, but adopts a dorsiflexed angle during swing. The ankle unit was designed, fabricated, and assessed in level ground walking trials on a unilateral transtibial prosthesis user to experimentally validate its stance and swing phase behaviors. The assessment consisted of three conditions: the ankle in an operational configuration, the ankle in a locked configuration (unable to dorsiflex), and the subject’s daily use ESR prosthesis. When the ankle was operational, minimum foot clearance (MFC) increased by 13 mm relative to the locked configuration and 15 mm relative to his daily use prosthesis. Stance phase energy return was not significantly impacted in the operational configuration. The increase in MFC provided by the passive dorsiflexing ankle prosthesis may be sufficient to decrease the rate of falls experienced by prosthesis users in the real world.

The need to improve workplace performance and productivity is a commonly expressed view. This paper reports on community perception of productivity. It suggests that workers’ negative perceptions regarding a distribution of the benefits of productivity may act as a barrier to productivity enhancement.

Parasitic worms are amongst the most common pathogens to infect humans and have a long-established history of inflicting disease in their hosts. There is a large body of evidence that states intestine-dwelling helminths ensure their survival by influencing the host immune response against them. In recent years, it has become apparent that the large and diverse microbial communities that exist in the gastrointestinal (GI) tract of the host and within the parasite itself have a pivotal role in worm survival and persistence. Using a variety of mouse models (including laboratory, germ-free and rewilded mice), there have been new insights into how bacteria and worms interact with each other; this includes the discovery that Trichuris is unable to hatch and/or infect their host in the absence of bacteria, and that these worms contain a Trichuris-specific gut microbiota. These interactions are determined in part by the capacity of the host, gut microbiota and worms to communicate via metabolites such as butyrate, which are microbially derived and have known immunoregulatory properties. By exploring the contribution of gut bacteria to worm infections and the intricate relationship that exists between them, an exciting and emerging field in whipworm parasitology is established.

OBJECTIVES/GOALS: “Cure Quest” is an adventure quest game about the process of new drug discovery and development. The player explores a magical island in search of a cure for a mysterious illness, traveling through different lands based on the stages of the drug discovery pipeline. Along the way, they must solve puzzles, decipher clues, and enlist the help of a ‘team science’ group of collaborators. The game uses a fantastical setting and engaging story to communicate the topic through metaphorical representations, instilling a sense of wonderment in the learning process. Real-world science is embedded into fictionalized lands such as the Labyrinth of Target Identification, the Forest of Small Molecule Discovery, the Tree of Biostatistics, the Mountains of FDA Approval and the Desert of Funding. The project represents a novel application of game-based learning to a complex topic not typically addressed through games. The process of designing and developing the game itself uncovers strong parallels between the interdisciplinary game design process and the interdisciplinary team science process. The objective of the game is to communicate high-level concepts of the drug discovery and development process, starting with the principles of ethical research and the motivations behind medical discovery, through the development of a new drug and finally to FDA approval. The goal is to improve understanding of clinical translational science among the different disciplines involved, and to raise overall awareness of the drug discovery process. METHODS/STUDY POPULATION: The game is being developed through a collaboration between faculty and students at ISMMS and the Games and Simulation Arts and Science Program at Rensselaer Polytechnic Institute. The first target audience is 2nd-3rd year medical students, with the future goal of adapting the game to a broader population. The game design is informed by specific learning outcomes, input from players in the target population and an ongoing iterative design process. The game is designed for mobile devices (iOS and Android), with an emphasis on narrative, exploration, and puzzle solving. Future evaluation will be performed through a quasi-experimental design comparing standard lectures with the game on a drug discovery. RESULTS/ANTICIPATED RESULTS: The game is currently in development, but the project has yielded insight into the design process for serious games in medicine. We found that for a game of this type it is essential not just to have both designers and subject matter experts, but to enable cross-pollination of modes of thinking. Through multiple design iterations and focus groups, we found that a game design approach rooted in narrative and allegorical abstraction would have a better ability to engage the target audience than one focused only on realistic simulation. When complete, we anticipate that the game will improve understanding of the core concepts in drug discovery. CureQuest is designed as an episodic game, following the sequence of stages in the drug discovery and development process. In this version of the game, we demonstrate five of the initial episodes: The City of Discovery of Unmet Medical Need; The Labyrinth of Target Identification; the Aquarium of Transgenic Phenotype Expression; the Rival Researcher Gang Quiz Battle; and the Desert of Funding. DISCUSSION/SIGNIFICANCE OF IMPACT: If successful, the game-based learning approach can help fill key gaps in current formal medical and scientific training, as well as gaps in understanding among the general public. The design process serves as an informative model of evolving collaborative team science.

Disease surveillance in wildlife populations presents a logistical challenge, yet is critical in gaining a deeper understanding of the presence and impact of wildlife pathogens. Erinaceus coronavirus (EriCoV), a clade C Betacoronavirus, was first described in Western European hedgehogs (Erinaceus europaeus) in Germany. Here, our objective was to determine whether EriCoV is present, and if it is associated with disease, in Great Britain (GB). An EriCoV-specific BRYT-Green® real-time reverse transcription PCR assay was used to test 351 samples of faeces or distal large intestinal tract contents collected from casualty or dead hedgehogs from a wide area across GB. Viral RNA was detected in 10.8% (38) samples; however, the virus was not detected in any of the 61 samples tested from Scotland. The full genome sequence of the British EriCoV strain was determined using next generation sequencing; it shared 94% identity with a German EriCoV sequence. Multivariate statistical models using hedgehog case history data, faecal specimen descriptions and post-mortem examination findings found no significant associations indicative of disease associated with EriCoV in hedgehogs. These findings indicate that the Western European hedgehog is a reservoir host of EriCoV in the absence of apparent disease.

OBJECTIVES/SPECIFIC AIMS: “Cure Quest” is an adventure quest game for mobile tablets that aims to teach the player about the complexities of discovery and development of new medicines. The game instills a sense of wonderment into the learning process, taking the player to a world of magic where a mysterious condition has affected the land and they must follow the steps of the discovery and development process to find a treatment. METHODS/STUDY POPULATION: The game is being developed through a collaboration between faculty and students at ISMMS and the Games and Simulation Arts and Science Program at Rensselaer Polytechnic Institute. The first target audience is 2nd–3rd year medical students, with the future goal of adapting the game to a broader population. RESULTS/ANTICIPATED RESULTS: The game is currently in development, but the project has yielded insight into the design process for serious games in medicine. We found that for a game of this type it is essential not just to have both designers and subject matter experts, but to enable cross-pollination of modes of thinking. Through multiple design iterations and focus groups, we found that a game design approach rooted in narrative and allegorical abstraction would have a better ability to engage the target audience than one focused only on realistic simulation. When complete, we anticipate that the game will improve understanding of the core concepts in drug discovery. DISCUSSION/SIGNIFICANCE OF IMPACT: If successful, the game-based learning approach can help fill key gaps in current formal medical and scientific training, as well as gaps in understanding among the general public. The design process serves as an informative model of evolving collaborative team science.

Smolyaninovite, (Co, Ni, Ca, Mg)3 (Fe, Al)2 (AsO4)4. 11H2O, has recently been recognized in the mineralized region around Mount Cobalt, Queensland. It is a soft polycrystalline earthy yellow-brown material, is probably the weathering product of cobaltian arsenopyrite or alloclase, and shows para-magnetic properties.

The Darwin–Hatherton Glacial system (DHGS) connects the East Antarctic Ice Sheet (EAIS) with the Ross Ice Shelf and is a key area for understanding past variations in ice thickness of surrounding ice masses. Here we present the first detailed measurements of ice thickness and grounding zone characteristics of the DHGS as well as new measurements of ice velocity. The results illustrate the changes that occur in glacier geometry and ice flux as ice flows from the polar plateau and into the Ross Ice Shelf. The ice discharge and the mean basal ice shelf melt for the first 8.5 km downstream of the grounding line amount to 0.24 ± 0.05 km3 a−1 and 0.3 ± 0.1 m a−1, respectively. As the ice begins to float, ice thickness decreases rapidly and basal terraces develop. Constructed maps of glacier geometry suggest that ice drainage from the EAIS into the Darwin Glacier occurs primarily through a deep subglacial canyon. By contrast, ice thins to <200 m at the head of the much slower flowing Hatherton Glacier. The glaciological field study establishes an improved basis for the interpretation of glacial drift sheets at the link between the EAIS and the Ross Ice Sheet.

The effects of metribuzin herbicide and phorate insecticide were studied on summer harvest chipping-potatoes at Muscatine, IA, from 1989 to 1991. Phorate at 1.5 kg/ha increased total and ‘A’-size tuber yield and tuber specific gravity. Metribuzin applied at 0.56 kg/ha postemergence decreased total and ‘A’-size tuber yield. Metribuzin applied at 0.56 kg/ha preemergence and 0.28 kg/ha postemergence did not reduce Atlantic cultivar yield. Metribuzin did not affect ‘B’-size tuber yield or specific gravity. Phorate in combination with metribuzin did not increase plant injury or reduce tuber yield.

New dating confirms that people occupied the Australian continent before the earliest time inferred from conventional radiocarbon analysis. Many of the new ages were obtained by accelerator mass spectrometry 14C dating after an acid–base–acid pretreatment with bulk combustion (ABA-BC) or after a newly developed acid–base–wet oxidation pretreatment with stepped combustion (ABOX-SC). The samples (charcoal) came from the earliest occupation levels of the Devil's Lair site in southwestern Western Australia. Initial occupation of this site was previously dated 35,000 14C yr B.P. Whereas the ABA-BC ages are indistinguishable from background beyond 42,000 14C yr B.P., the ABOX-SC ages are in stratigraphic order to ∼55,000 14C yr B.P. The ABOX-SC chronology suggests that people were in the area by 48,000 cal yr B.P. Optically stimulated luminescence (OSL), electron spin resonance (ESR) ages, U-series dating of flowstones, and 14C dating of emu eggshell carbonate are in agreement with the ABOX-SC 14C chronology. These results, based on four independent techniques, reinforce arguments for early colonization of the Australian continent.

The work described here concentrates on under-expanded, axisym-metric turbulent jets issuing into quiescent conditions. Under-expanded turbulent jets are applicable to most aircraft propulsion applications that use convergent nozzles. Experimental studies used laser doppler velocimetry (LDV) and pitot probe measurements along the jet centreline. These measurements were made for two nozzle pressure ratios (2·5 and 4·0) and at various streamwise positions up to 10 nozzle diameters downstream of the nozzle exit plane. A computational fluid dynamics (CFD) model was developed using the Fluent code and utilised the RNG K-ε two-equation turbulence model. A mesh resolution of approximately one hundredth of nozzle exit diameter was found to be sufficient to establish a mesh independent solution.

Comparison of the jet centreline axial velocity (LDV data) and pressure ratio (pitot probe data) showed good agreement with the CFD model. The correct number of shock cells had been predicted and the shock strength agreed well between the experiments and numerical model. The CFD model was, however, found to over-predict the shock cell length resulting in a longer supersonic core. There was some evidence, based on analysis of the LDV measurements that indicates the presence of swirl and jet unsteadiness, which could contribute to a shortening of the shock cell length. These effects were not modelled in the CFD. Correlation between the LDV and pitot probe measurements was generally good, however, there was some evidence that probe interference may have caused the premature decay of the jet. Overall, this work has indicated the good agreement between a CFD simulation using the RNG k-ε turbulence model and experimental data when applied to the prediction of the flowfield generated by under-expanded turbulent jets. The suitability of the LDV technique to jet flows with velocities up to 500ms-1 has also been demonstrated.

Skin and soft tissue infections (SSTIs) due to Staphylococcus aureus have become increasingly common in the outpatient setting; however, risk factors for differentiating methicillin-resistant S. aureus (MRSA) and methicillin-susceptible S. aureus (MSSA) SSTIs are needed to better inform antibiotic treatment decisions. We performed a case-case-control study within 14 primary-care clinics in South Texas from 2007 to 2015. Overall, 325 patients [S. aureus SSTI cases (case group 1, n = 175); MRSA SSTI cases (case group 2, n = 115); MSSA SSTI cases (case group 3, n = 60); uninfected control group (control, n = 150)] were evaluated. Each case group was compared to the control group, and then qualitatively contrasted to identify unique risk factors associated with S. aureus, MRSA, and MSSA SSTIs. Overall, prior SSTIs [adjusted odds ratio (aOR) 7·60, 95% confidence interval (CI) 3·31–17·45], male gender (aOR 1·74, 95% CI 1·06–2·85), and absence of healthcare occupation status (aOR 0·14, 95% CI 0·03–0·68) were independently associated with S. aureus SSTIs. The only unique risk factor for community-associated (CA)-MRSA SSTIs was a high body weight (⩾110 kg) (aOR 2·03, 95% CI 1·01–4·09).

The pay-off, in the final analysis needs to be a better air transport system for the traveller. This will, in turn, generate more traffic for the airline and hence more business for the aircraft manufacturer. To achieve a substantial and profitable share of the available market for new aircraft the manufacturer's product must be produced at the right time, meet the requirements of the airlines, and be competitive in terms of price and capability with the products, both new and existing, of his competitors. Advanced technology, applied in a cost effective manner, can be one of the ways of achieving this competitiveness and of improving the air transport system.

Three subjects have been selected for discussion in this paper, each of which has a major influence on aircraft design and operating economics. These subjects are airfield performance, noise and aircraft utilisation.

For an aircraft to have good operating economics it must be able to operate with a high load factor over a large percentage of the routes on which it is to be used. The permissible take-off or landing weight, and hence the payload, can be limited by any one of many airworthiness requirements. These include take-off distance and climb, landing distance and climb, and obstacle clearance in the vicinity of the airport.

Noise and economics are major interlinking factors which are likely to have an impact on the whole future pattern of civil air transport development. In the past decade environmental pressures increased the need to design for low community noise levels; however, the fuel crisis and inflation have now shifted emphasis back towards fuel economy and lower operating costs.

The rate of growth achieved by air transport during the past three decades far exceeds that of any other transport system; this considerable rate of growth is clearly illustrated by, for example, the overall increase in total annual passenger movements at London's Heathrow airport, as shown in Fig. 1. It will be further noted that, despite the tendency for aircraft size to increase, the total annual aircraft movements at the same airport also show an overall growth pattern.

Shock-wave/turbulent boundary-layer interactions (SWTBLIs) with separation are known to be inherently unsteady but their physical mechanisms are still not totally understood. An experimental investigation has been performed in a supersonic wind tunnel at a freestream flow Mach number of 2·42. The interaction between a shock wave created by a shock generator (α = 3°, α = 9°, α = 13° and α = 15° deflection angles) and a turbulent boundary layer with thickness δ = 5mm has been studied. High-speed Schlieren visualisations have been obtained and used to measure shock wave unsteadiness by means of digital image processing. In the interactions with separation, the reflected shock’s unsteadiness has been in the order of 102Hz. High-speed wall pressure measurements have also been obtained with fast-response micro-transducers along the interactions. Most of the energy of the incoming turbulent boundary layer is broadband and at high frequencies (>104Hz). An addition of low-frequency (<104Hz) fluctuation energy is found at separation. Along the interaction region, the shock impingement results in an amplification of fluctuation energy due to the increase in pressure. Under the main recirculation region core there is only an increase in high frequency energy (>104Hz). Amplification of lower frequency fluctuation energy (>103Hz) is also observed close to the separation and reattachment regions.