As a required sample preparation method for 14C graphite, the Zn-Fe reduction method has been widely used in various laboratories. However, there is still insufficient research to improve the efficiency of graphite synthesis, reduce modern carbon contamination, and test other condition methodologies at Guangxi Normal University (GXNU). In this work, the experimental parameters, such as the reduction temperature, reaction time, reagent dose, Fe powder pretreatment, and other factors, in the Zn-Fe flame sealing reduction method for 14C graphite samples were explored and determined. The background induced by the sample preparation process was (2.06 ± 0.55) × 10–15, while the 12C– beam current were better than 40μA. The results provide essential instructions for preparing 14C graphite of ∼1 mg at the GXNU lab and technical support for the development of 14C dating and tracing, contributing to biology and environmental science.

A new vacuum line to extract CO2 from carbonate and dissolved inorganic carbon (DIC) in water was established at Guangxi Normal University. The vacuum line consisted of two main components: a CO2 bubble circulation region and a CO2 purification collection region, both of which were made of quartz glass and metal pipelines. To validate its reliability, a series of carbonate samples were prepared using this system. The total recovery rate of CO2 extraction and graphitization exceeded 80%. Furthermore, the carbon content in calcium carbonate exhibited a linear relationship with the CO2 pressure within the system, demonstrating its stability and reliability. The system was also employed to prepare and analyze various samples, including calcium carbonate blanks, foraminiferal, shell, groundwater, and subsurface oil-water samples. The accelerator mass spectrometry (AMS) results indicated that the average beam current for 12C- in the samples exceeded 40 μA. Additionally, the contamination introduced during the liquid sample preparation process was approximately (1.77 ± 0.57) × 10−14. Overall, the graphitized preparation system for carbonate and DIC in water exhibited high efficiency and recovery, meeting the requirements for samples dating back to approximately 30,000 years.

Compared with nitrogen and argon, helium is lighter and can better reduce the beam loss caused by angular scattering during beam transmission. The molecular dissociation cross-section in helium is high and stable at low energies, which makes helium the prevalent stripping gas in low-energy accelerator mass spectrometry (AMS). To study the stripping behavior of 14C ions in helium at low energies, the charge state distributions of carbon ion beams with −1, +1, +2, +3, and +4 charge states were measured at energies of 70–220 keV with a compact 14C-AMS at Guangxi Normal University (GXNU). The experimental data were used to analyze the stripping characteristics of C-He in the energy range of 70–220 keV, and new charge state yields and exchange cross-sections in C-He were obtained at energies of 70–220 keV.

A single-stage accelerator mass spectrometer (GXNU-AMS) developed for radiocarbon and tritium measurements was installed and commissioned at Guangxi Normal University in 2017. After several years of operational and methodological upgrades, its performance has been continuously improved and applied in multidisciplinary fields. Currently, the measurement sensitivity for radiocarbon and tritium is 14C/12C ∼ (3.14 ± 0.05) ×10–15 and 3H/1H ∼ (1.23 ± 0.17)×10–16, respectively, and the measurement accuracy is ∼0.6%, which can meet the measurement requirements in the nuclear, earth, environmental and life science fields. This study presents the performance characteristics of GXNU-AMS and several interesting application studies.

A new system for preparing 14C samples was established for a compact accelerator mass spectrometer (GXNU-AMS) at Guangxi Normal University. This sample preparation system consists of three units: a vacuum maintenance unit, a CO2 purification unit, and a CO2 reduction unit, all of which were made of quartz glass. A series of radiocarbon (14C) preparation experiments were conducted to verify the reliability of the system. The recovery rate of graphite obtained was more than 80%. The carbon content in the commercial toner and wood sample was linearly fitted to the CO2 pressure in the measurement unit of the system. The results showed a good linear relationship, indicating that the reliability of the sample preparation system. AMS measurements were conducted on a batch of standard, wood, and dead graphite samples prepared using this system. The results showed that the beam current of 12C- for each sample was more than 40 μA, the carbon contamination introduced during the sample preparation process was ∼ 2 × 10–15, and that the new sample preparation system is compact, low-contamination, and efficient and meets the GXNU-AMS requirements for 14C samples.

Many waterflooding oil fields, injecting water into an oil-bearing reservoir for pressure maintenance, are in their middle to late stages of development. To explore the geological conditions and improve oilfield recovery of the most important well group of the Hu 136 block, located on the border areas of three provinces (Henan, Shandong, and Hebei), Zhongyuan Oilfield, Sinopec, central China, a 14C cross-well tracer monitoring technology was developed and applied in monitoring the development status and recognize the heterogeneity of oil reservoirs. The tracer response in the production well was tracked, and the water drive speed, swept volume of the injection fluid were obtained. Finally, the reservoir heterogeneity characteristics, such as the dilution coefficient, porosity, permeability, and average pore-throat radius, were fitted according to the mathematical model of the heterogeneous multi-layer inter-well theory. The 14C-AMS technique developed in this work is expected to be a potential analytical method for evaluating underground reservoir characteristics and providing crucial scientific guidance for the mid to late oil field recovery process.

Areas affected by routine radiocarbon (14C) discharges from the Fukushima Dai-ichi Nuclear Power Plant (FDNPP) and accidental releases in March 2011 were investigated by analysis of cores from Japanese cypress and cedar trees growing at sites 9 and 24 km northwest of the plant. 14C concentrations in tree rings from 2008–2014 (before and after the accident) were determined by accelerator mass spectrometry, with 14C activities in the range 231–256 Bq kg−1 C. Activities during the period 2012–2014, after FDNPP shutdown, represent background levels, while the significantly higher levels recorded during 2008–2010, before the accident, indicate uptake of 14C from routine FDNPP operations. The mean excess 14C activity for the pre-accident period at the sites 9 and 24 km northwest of the plant were 21 and 12 Bq kg−1 C, respectively, indicating that the area of influence during routine FDNPP operations extended at least 24 km northwest. The mean excess tree-ring 14C activities in 2011 were 10 and 5.8 Bq kg−1 C at 9 and 24 km northwest, respectively, documenting possible impact of the FDNPP accident on 14C levels in trees.

The jungles of Linyun and Longlin Autonomous Prefecture, located in the heart of the southwestern Guangxi Zhuang Autonomous Region of China, are home to the oldest tea trees (Camellia sinensis) in the world. In the absence of regular annual rings, radiocarbon (14C) dating is one of the most powerful tools that can assist in the determination of the ages and growth rates of these plants. In this work, cores were extracted from large ancient tea trees in a central Longlin rain forest; extraction of carbon was performed with an automated sample preparation system. The 14C levels in the tree cores were measured using accelerator mass spectrometry (AMS) at the University of Tsukuba. These measurements indicated that contrary to conventional views, the ages of trees in these forests range up to ~700 years, and the growth rate of this species is notably slow, exhibiting a long-term radial growth rate of 0.039±0.006 cm/yr. It was demonstrated that 14C analyses provide accurate determination of ages and growth rates for subtropical wild tea trees.

Ice originating near the inland ice divide of the ice sheet can reappear as marginal ice at the surface near the ice terminal in the ablation area. We have analyzed δ18O values and ion concentrations of the Skallen, Skarvsnes and Hamna terminal ice sections, located along the estuary line in the Sôya drainage basin, East Antarctica. The data suggest that the upper part of the Skallen terminal ice section could have originated from inland precipitation on the Shirase drainage basin during marine isotope stage (MIS) 5e, while the upper part of Skarvsnes and Hamna terminal ice sections could have originated from inland precipitation on the Sôya drainage basin. We calculate past elevation maps for the Antarctic ice sheet using the three-dimensional model, SICOPOLIS. This model suggests that the upstream portion of the Sôya drainage basin during the glacial period (MIS 2, 3 or 4) was located to the northeast of its present location. A flow history is proposed wherein ice from the inland Shirase drainage area flowed over the present ice-divide line from the Shirase to the Sôya drainage basin during the glacial period. The ice in the Sôya drainage basin then flowed to the marginal part of the sheet after the ice divide had assumed its present position.