The combined effects of heater position, mean flow parameters and flame models on thermoacoustic instability in a one-dimensional Rijke tube are studied systematically by classic linear stability analysis (LSA) and lattice Boltzmann method (LBM) simulation. In the former, the stability range of the linear flame model under low Mach number assumption is solved analytically, while in the more general case, it is obtained by numerically solving the dispersion relation. Both the linear and nonlinear flame model cases are studied using the LBM with a spectral multiple-relaxation-time collision model and a newly developed heat source term. With the linear flame model, the LBM is in good agreement with LSA in predicting the transition point and growth rates, while with the nonlinear flame model, LBM simulations are consistent with solutions of limit cycle theory in the fully developed state. These results demonstrate the applicability of the LBM in solving complex thermoacoustic problems.

For $r\in(0,1)$, let $\mu \left( r\right) $ be the modulus of the plane Grötzsch ring $\mathbb{B}^2\setminus[0,r]$, where $\mathbb{B}^2$ is the unit disk. In this paper, we prove that

\begin{equation*}\mu \left( r\right) =\ln \frac{4}{r}-\sum_{n=1}^{\infty }\frac{\theta _{n}}{2n}r^{2n},\end{equation*}

with $\theta _{n}\in \left( 0,1\right)$. Employing this series expansion, we obtain several absolutely monotonic and (logarithmically) completely monotonic functions involving $\mu \left( r\right) $, which yields some new results and extend certain known ones. Moreover, we give an affirmative answer to the conjecture proposed by Alzer and Richards in H. Alzer and K. Richards, On the modulus of the Grötzsch ring, J. Math. Anal. Appl. 432(1): (2015), 134–141, DOI 10.1016/j.jmaa.2015.06.057. As applications, several new sharp bounds and functional inequalities for $\mu \left( r\right) $ are established.

The gas-particle flow with multiple dispersed solid phases is associated with a complicated multiphase flow dynamics. In this paper, a unified algorithm is proposed for the gas-particle multiphase flow. The gas-kinetic scheme (GKS) is used to simulate the gas phase and the multiscale unified gas-kinetic wave–particle (UGKWP) method is developed for the multiple dispersed solid particle phase. For each disperse solid particle phase, the decomposition of deterministic wave and statistic particle in UGKWP is based on the local cell's Knudsen number. The method for solid particle phase can become the Eulerian fluid approach at the small cell's Knudsen number and the Lagrangian particle approach at the large cell's Knudsen number. This becomes an optimized algorithm for simulating dispersed particle phases with a large variation of Knudsen numbers due to different physical properties of the individual particle phase, such as the particle diameter, material density, etc. The GKS-UGKWP method for gas-particle flow unifies the Eulerian–Eulerian and Eulerian–Lagrangian methods. The particle and wave decompositions for the solid particle phase and their coupled evolution in UGKWP come from the consideration to balance the physical accuracy and numerical efficiency. Two cases of a gas–solid fluidization system, i.e. one circulating fluidized bed and one turbulent fluidized bed, are simulated. The typical flow structures of the fluidized particles are captured, and the time-averaged variables of the flow field agree well with the experimental measurements. In addition, the shock particle–bed interaction is studied by the proposed method, which validates the algorithm for the polydisperse gas-particle system in the highly compressible case, where the dynamic evolution process of the particle cloud is investigated.

In the absence of the necessary valley topography, karst depressions are sometimes used to construct conventional impoundments in order to contain tailings. Leakage is a primary concern for such impoundments. The purpose of the current study was to determine the characteristics and barrier performance of laterite mantling karst depressions, using, as an example, the Wujiwatang (WJWT) tailings impoundment, located in the Gejiu mining area, southwestern China. The geotechnical-hydrogeological properties, geochemistry, mineral compositions, and particle shapes of the laterite were investigated by geotechnical techniques, chemical analysis, X-ray diffraction (XRD), and scanning electron microscopy (SEM). The results showed that the laterite contained poorly sorted particles that covered a wide spectrum of grain sizes (<5 mm to <50 nm), and was unexpectedly categorized as silty clay or silt with a high liquid limit. The continuous gradation and small D90 value helped the laterite achieve saturated hydraulic conductivities in the range of <10–6 cm/s required for impoundment liners. The laterite beneath the tailings impoundment was finer-grained and had a lower permeability than that of the laterite on the depression walls within the same depression. Geochemically and mineralogically, the laterite was classified as true laterite and its major mineralogical constituents were gibbsite and goethite with chlorite occurring in trace amounts. The laterite was dominated by subspherolitic–spherolitic cohesionless grains (concretions) made up of Al, Fe, Ti, and Mn oxides and hydroxides. The laterite did not have plasticity indices in the clay range. Fortunately, slopewash prior to tailings containment selectively transported the finer oxide concretions to the depression floor, creating a natural low-permeability barrier for the WJWT tailings impoundment. This is undoubtedly important for the planning and design of future karst depression-type tailings impoundments around the world.

Schistosomiasis, a parasite infectious disease caused by Schistosoma japonicum, often leads to egg granuloma and fibrosis due to the inflammatory reaction triggered by egg antigens released in the host liver. This study focuses on the role of the egg antigens CP1412 protein of S. japonicum (SjCP1412) with RNase activity in promoting liver fibrosis. In this study, the recombinant egg ribonuclease SjCP1412, which had RNase activity, was successfully prepared. By analysing the serum of the population, it has been proven that the anti-SjCP1412 IgG in the serum of patients with advanced schistosomiasis was moderately correlated with liver fibrosis, and SjCP1412 may be an important antigen associated with liver fibrosis in schistosomiasis. In vitro, the rSjCP1412 protein induced the human liver cancer cell line Hep G2 and liver sinusoidal endothelial cells apoptosis and necrosis and the release of proinflammatory damage-associated molecular patterns (DAMPs). In mice infected with schistosomes, rSjCP1412 immunization or antibody neutralization of SjCP1412 activity significantly reduced cell apoptosis and necroptosis in liver tissue, thereby reducing inflammation and liver fibrosis. In summary, the SjCP1412 protein plays a crucial role in promoting liver fibrosis during schistosomiasis through mediating the liver cells apoptosis and necroptosis to release DAMPs inducing an inflammatory reaction. Blocking SjCP1412 activity could inhibit its proapoptotic and necrotic effects and alleviate hepatic fibrosis. These findings suggest that SjCP1412 may be served as a promising drug target for managing liver fibrosis in schistosomiasis japonica.

This paper studies the synchronization control of the blanket remote maintenance robot (BRMR) of the China fusion engineering test reactor (CFETR). First, the general state space mathematical model of BRMR was established by using a physical-based method. Second, based on the receding horizon optimization of model predictive control (MPC) and cross-coupling error reduction in cross-coupling control (CCC), the innovative MPC-CCC controller was proposed to realize the single-system and multisystem error convergence and high accuracy transportation of blanket through the high accuracy synchronization control of BRMR. Third, to verify the control effectiveness of the MPC-CCC controller, two types of simulations and experiments were implied compared with the original proportional-integral (PI) controller in Mover. Results showed that simulation and experiments were highly consistent. It is found that the use of an MPC-CCC controller can result in up to a 70% reduction in displacement error and up to a 59% reduction in synchronization error compared to the PI controller. And the accuracy of the MPC-CCC controller satisfies the real requirement of the maintenance process of the blanket. This work provides the theoretical basis and practical experience for the highly stable, safe, and efficient maintenance of blankets in the future.

Large gatherings of people on cruise ships and warships are often at high risk of COVID-19 infections. To assess the transmissibility of SARS-CoV-2 on warships and cruise ships and to quantify the effectiveness of the containment measures, the transmission coefficient (β), basic reproductive number (R0), and time to deploy containment measures were estimated by the Bayesian Susceptible-Exposed-Infected-Recovered model. A meta-analysis was conducted to predict vaccine protection with or without non-pharmaceutical interventions (NPIs). The analysis showed that implementing NPIs during voyages could reduce the transmission coefficients of SARS-CoV-2 by 50%. Two weeks into the voyage of a cruise that begins with 1 infected passenger out of a total of 3,711 passengers, we estimate there would be 45 (95% CI:25-71), 33 (95% CI:20-52), 18 (95% CI:11-26), 9 (95% CI:6-12), 4 (95% CI:3-5), and 2 (95% CI:2-2) final cases under 0%, 10%, 30%, 50%, 70%, and 90% vaccine protection, respectively, without NPIs. The timeliness of strict NPIs along with implementing strict quarantine and isolation measures is imperative to contain COVID-19 cases in cruise ships. The spread of COVID-19 on ships was predicted to be limited in scenarios corresponding to at least 70% protection from prior vaccination, across all passengers and crew.

We describe an extraordinarily preserved non-trilobite artiopod Bailongia longicaudata gen. et sp. nov. from the Cambrian Stage 4 Guanshan Biota in Yiliang, Kunming of the Yunnan Province in China. Its exoskeleton consists of a large semi-elliptical cephalon with paired lateral posterior eyes, nine tapering homonomous tergites and a long slender tailspine. Appendages include paired small antennae, at least three pairs of post-antennal cephalic limbs, and trunk biramous limbs consisting of an endopod and an exopod with lamellae. B. longicaudata does not conform to any taxon within Artiopoda, although the eyes invite comparisons with Xandarella spectaculum, Sinoburius lunaris and Phytophilaspis. Parsimony analyses indicate Bailongia is a member of Artiopoda and cannot be readily accommodated within any of the major artiopod clades.

This cross-sectional study aimed to examine the associations between dietary fibre (DF) intake and depressive symptoms in a general adult population in Tianjin, China. A total of 24 306 participants (mean age 41 years; range 18–91 years) were enrolled. DF intake was assessed using a validated self-administered FFQ. Depressive symptoms were assessed using the Self-Rating Depression Scale. Associations between DF intake and depressive symptoms were estimated using logistic regression analysis. Socio-demographic, behavioural, health status and dietary factors were adjusted. In men, compared with participants in the lowest quartiles for total, soluble, vegetable and soya DF, OR for depressive symptoms in the highest were 0·83 (95 % CI 0·69, 0·99), 0·74 (95 % CI 0·63, 0·87), 0·79 (95 % CI 0·65, 0·96) and 0·69 (95 % CI 0·60, 0·81), respectively. In women, compared with participants in the lowest quartiles for vegetable and soya DF, the OR for depressive symptoms in the highest were 0·77 (95 % CI 0·64, 0·93) and 0·82 (95 % CI 0·70, 0·95), respectively. No association was found between total or soluble DF intake and depressive symptoms in women. No association was found between insoluble, cereal, fruit or tuber DF intake and depressive symptoms in men and women. Linear associations between DF intake and depressive symptoms were only detected for soya DF (men, β = –0·148, P < 0·0001; women, β = –0·069, P = 0·04). Results suggest that intake of soluble, vegetable and soya DF was inversely associated with depressive symptoms. These results should be confirmed through prospective and interventional studies.

In this work, we propose a broadband, polarization-insensitive and wide incident angle stable metamaterial absorber (MA) based on the resistive film. The absorber consists of a three-layer structure with each layer of dielectric substrate printed with different shapes of resistive film. The multilayer structure not only extends the absorption bandwidth but also maintains high absorption under large wave incident angles. Numerical simulation shows that the absorptivity of a normal incident wave is above 90% in the frequency range 2.34–18.95 GHz, corresponding to a relative absorption bandwidth of 156%. Moreover, the whole MA structure has a total thickness of 11.3 mm, corresponding to 0.09 λ0 at its lowest absorption frequency. Due to the high symmetry of the structure, the absorber has good polarization insensitivity. In addition, for both transverse electric and transverse magnetic incidence, the proposed absorber achieves an absorptivity of more than 80% at incident angles of up to 45° and thus has good stability for wide incident angles. The absorption principle of the absorber is analyzed by the surface current and power loss density distribution. Parameter analysis is also performed for bandwidth optimization. Due to its advantages of wideband absorption with high efficiency, the proposed absorber has the potential to be applied to the energy-harvesting and electromagnetic stealth fields.

Organic light-emitting diodes (OLEDs) have aroused great attention due to the advantages of high luminescent efficiency, fast response time, wide viewing angle, and the compatibility with the flexible electronics. Nevertheless, the organic luminescent materials are vulnerable to environment moisture/oxygen. Thus, how to protect the OLEDs from the ambient moisture/oxygen erosion is of great importance to ensure the stability and reliability. Thin film encapsulation (TFE) via atomic layer deposition (ALD) has emerged as a potential method to meet the encapsulation requirements of OLEDs due to its unique assets. In this review, the challenges of TFE, including pinholes, crystallization, cracks, and overheated, are introduced first. The ALD-based monolayer, composite structures, and hybrid laminates were developed to improve the barrier property, flexibility, and thermal conductivity. Besides, the ALD reactors and processes for TFE are also reviewed. Finally, the challenges remained and future development in the stabilization of OLEDs via ALD are also discussed.

Flexible electrode is an indispensable component of emerging portable, flexible, and wearable electronic devices. Although various flexible electrodes with different dimensions and functions have been explored, developing a new electrode material with excellent mechanical reliability and superior electrical performance remains a challenge. Here, a graphene-covered Cu composite electrode film with a total thickness of ∼100 nm is successfully fabricated onto a flexible polyimide substrate by means of a series of assembly methods including physical vapor deposition, chemical vapor deposition, and transfer technique. The composite electrode film on the flexible substrate exhibits evidently enhanced tensile strength, monotonic bending, and repeatedly bending fatigue reliability as well as electrical performance compared with that of the bared Cu film electrode. Such excellent mechanical performances are attributed to the role of the graphene coating in suppressing fatigue damage formation and preventing crack advance. It is expected that the chemical vapor-deposited graphene-covered Cu composite electrode would extend the potential ultrathin metal film electrode as the innovative electrode material for the next-generation flexible electronic devices.