A high-energy pulsed vacuum ultraviolet (VUV) solid-state laser at 177 nm with high peak power by the sixth harmonic of a neodymium-doped yttrium aluminum garnet (Nd:YAG) amplifier in a KBe2BO3F2 prism-coupled device was demonstrated. The ultraviolet (UV) pump laser is a 352 ps pulsed, spatial top-hat super-Gaussian beam at 355 nm. A high energy of a 7.12 mJ VUV laser at 177 nm is obtained with a pulse width of 255 ps, indicating a peak power of 28 MW, and the conversion efficiency is 9.42% from 355 to 177 nm. The measured results fitted well with the theoretical prediction. It is the highest pulse energy and highest peak power ever reported in the VUV range for any solid-state lasers. The high-energy, high-peak-power, and high-spatial-uniformity VUV laser is of great interest for ultra-fine machining and particle-size measurements using UV in-line Fraunhofer holography diagnostics.

The current study used behavioural and electroencephalograph measures to compare the transferability of three home-based interventions — cognitive training (CT), neurofeedback training (NFT), and CT combined with NFT — for reducing symptoms in children with attention-deficit/hyperactivity disorder (AD/HD). Following a multiple-baseline single-case experimental design, twelve children were randomised to a training condition. Each child completed a baseline phase, followed by an intervention phase. The intervention phase consisted of 20 sessions of at-home training. Tau-U analysis and standardised visual analysis were adopted to detect effects. Results showed that CT improved inhibitory function and NFT improved alpha EEG activity and working memory. The combined condition, which was a reduced ‘dose’ of CT and NFT, did not show any improvements. The three conditions did not alleviate AD/HD symptoms. While CT and NFT may have transfer effects on executive functions, considering the lack of improvement in symptoms, this study does not support CT and NFT on their own as a treatment for children with AD/HD.

The Antarctic subglacial drilling rig (ASDR) is designed to recover 105 mm-diameter ice cores up to 1400 m depth and 41.5 mm-diameter bedrock cores up to 2 m in length. In order to ensure safe and convenient drilling, drilling auxiliaries are designed to support fieldwork and servicing. These auxiliaries are subdivided into several systems for power supply, drill tripping in the borehole, ice core and chip processing, and drill servicing and maintenance. The required equipment also includes two generators, a drilling winch with a cable, logging winch with a cable, control desk, pipe handler with a fixed clamp, chip chamber vibrator, centrifuge, emergency devices and fitting and electrical tools. Additionally, several environmental protective measures such as a new liquid-tight casing with a thermal casing shoe and a bailing device for recovering drilling fluid from the borehole were designed. Most of the auxiliaries were tested during the summer of 2018–2019 near Zhongshan Station, East Antarctica while drilling to the bedrock to a depth of 198 m.

Drilling to the bedrock of ice sheets and glaciers offers unique opportunities for examining the processes occurring in the bed. Basal and subglacial materials contain important paleoclimatic and paleoenvironmental records and provide a unique habitat for life; they offer significant information regarding the sediment deformation beneath glaciers and its effects on the subglacial hydraulic system and geology. The newly developed and tested Antarctic subglacial drilling rig (ASDR) is designed to recover ice and bedrock core samples from depths of up to 1400 m. All of the drilling equipment is installed inside a movable, sledge-mounted, temperature-controlled and wind-protected drilling shelter and workshop. To facilitate helicopter unloading of the research vessel, the shelter and workshop can be disassembled, with individual parts weighing <2–3 tons. The entire ASDR system weighs ~55 tons, including transport packaging. The ASDR is designed to be transported to the chosen site via snow vehicles and would be ready for drilling operations within 2–3 d after arrival. The ASDR was tested during the 2018–2019 summer season near Zhongshan Station, East Antarctica. At the test site, 2-week drilling operations resulted in a borehole that reached bedrock at a depth of 198 m.

A new, modified version of the cable-suspended Ice and Bedrock Electromechanical Drill (IBED) was designed for drilling in firn, ice, debris-rich ice and rock. The upper part of the drill is almost the same for all drill variants and comprises four sections: cable termination, a slip-ring section, an antitorque system and an electronic pressure chamber. The lower part of the IBED comprises an auger core barrel, reamers, a core barrel for ice/debris-ice drilling and a conventional geological single-tube core barrel or custom-made double-tube core barrel. First, the short and full-scale field versions of the IBED were tested at an outdoor testing stand and a testing facility with a 12.5 m-deep ice well. Then, in the 2018–2019 summer season, the IBED was tested in the field at a site ~12 km south of Zhongshan Station, East Antarctica, and a ~6 cm bedrock core was recovered from a 198 m-deep borehole. A total of 18 d was required to penetrate the ice sheet. The retrieved core samples of blue ice, basal ice and bedrock provided valuable information regarding the Earth's paleo-environment.

In many cases, the efficiency and safety of a drilling project depend on the reliability of the electrical and electronic control system, as the process progresses without visual access of the operator. The electrical and electronic system provides and regulates the power supply for the drill, collects and monitors the drill data during the whole operating process, and sends and receives the control instructions and feedback signals. The entire system is composed of the surface, borehole and software subsystems. The surface subsystem serves for operating the drilling process, transmitting the drilling and environmental data, and supplying power for the drill motor and downhole control system. The borehole subsystem is generally intended for borehole data acquisition, drill motor control, power regulation and communication. The software subsystem is designed for human–computer interaction, data processing and storage, and programming of signal acquisition and transmission of data. The control system of Antarctic subglacial drilling rig was tested during the 2018–2019 summer season near Zhongshan Station, East Antarctica, in the course of drilling to the bedrock at a depth of 198 m. It exhibited a steady and efficient performance without significant system failures.

In the past few years, we have performed a 22 GHz H2O maser survey towards hundreds of BGPS sources using the 25-meter Nanshan Radio Telescope (NSRT) of the Xinjiang Astronomical Observatory, and detected more than one hundred masers. Our aim is to study star formation activities associated with these sources, as well as search for any correlations that may exist between 22 GHz H2O masers and the evolutionary stage of high-mass star formation regions. The NSRT has been upgraded and have now an effective diameter of 26 meter. Besides, cryogenically cooled dual-beam receiver systems covering seven millimeter-wave observing bands have been installed on the NSRT. For the next step of maser observation, we will continue to do H2O and SiO masers survey of massive dust clumps and monitor some maser sources.

Nitrogen is an essential element for biological activity, and nitrogen isotopic compositions of geological samples record information about both marine biological processes and environmental evolution. However, only a few studies of N isotopes in the early Cambrian have been published. In this study, we analysed nitrogen isotopic compositions, as well as trace elements and sulphur isotopic compositions of cherts, black shales, carbonaceous shales and argillaceous carbonates from the Daotuo drill core in Songtao County, NE Guizhou Province, China, to reconstruct the marine redox environment of both deep and surface seawater in the study area of the Yangtze shelf margin in the early Cambrian. The Mo–U covariation pattern of the studied samples indicates that the Yangtze shelf margin area was weakly restricted and connected to the open ocean through shallow water flows. Mo and U concentrations, δ15Nbulk and δ34Spy values of the studied samples from the Yangtze shelf margin area suggest ferruginous but not sulphidic seawater and low marine sulphate concentration (relatively deep chemocline) in the Cambrian Fortunian and early Stage 2; sulphidic conditions (shallow chemocline and anoxic photic zone) in the upper Cambrian Stage 2 and lower Stage 3; and the depression of sulphidic seawater in the middle and upper Cambrian Stage 3. Furthermore, the decreasing δ15N values indicate shrinking of the marine nitrate reservoir during the middle and upper Stage 3, which reflects a falling oxygenation level in this period. The environmental evolution was probably controlled by the changing biological activity through its feedback on the local marine environment.

The Lorentz factor (Γ) is an important parameter related to the relativistic jet physics. We study the evolution patterns of Γ within gamma-ray burst (GRB) and active galactic nuclear jets for individual GRB 090168, GRB 140508A, and 3C 454.3. By estimating the Γ values for well-separated pulses in GRBs 090618 and 140508A with an empirical relation derived from typical GRBs, we find that the Γ evolution pattern in the two GRBs are different. The increasing-to-coasting evolution pattern of Γ in GRB 090618 likely indicates that the GRB fireball is still being accelerated in the prompt phase. The clear decrease evolution pattern of Γ in GRB 140508A suggests the deceleration of the fireball components. By deriving the Γ value through fitting their spectral energy distribution in different flares of 3C 454.3, a pattern of Γ-tracking-γ-ray flux is clearly found, likely indicating that the observed gamma-ray flares are being due to the Doppler boosting effect to the jet emission.

In this paper, the recent studies of laboratory astrophysics with strong magnetic fields in China have been reviewed. On the Shenguang-II laser facility of the National Laboratory on High-Power Lasers and Physics, a laser-driven strong magnetic field up to 200 T has been achieved. The experiment was performed to model the interaction of solar wind with dayside magnetosphere. Also the low beta plasma magnetic reconnection (MR) has been studied. Theoretically, the model has been developed to deal with the atomic structures and processes in strong magnetic field. Also the study of shock wave generation in the magnetized counter-streaming plasmas is introduced.

Using nanoparticulate TiO2 films, the photocatalytic growth of Ag nanoparticles (NPs) in the AgNO3 aqueous solution has been studied in terms of reduction, nucleation, and coalescence. It was proved that Ag primary particles were formed in a growth time of <1 s after the photocatalysis started. The growth dynamics was found to be critical for isotropic and anisotropic growth of Ag NPs, depending on the AgNO3 concentration and surface properties of TiO2 films. In the AgNO3 solutions of ≤300 mg/L, the isotropic growth dominates the growth dynamic behavior, producing irregularly spherical Ag NPs. In the AgNO3 solutions of ≥400 mg/L, the increased reduction rate promotes the formation of Ag nanoplates in the product. Ostwald ripening and oriented attachment were suggested to be the mechanisms dominating the isotropic and anisotropic growth, respectively. A photocatalytic growth model of Ag NPs was proposed by taking Ag atom and Ag+ ion diffusion into consideration. The plasmonic properties of the Ag–TiO2 films were studied in terms of extinction, surface enhanced Raman scattering, and fluorescence enhancement.

The mutualism between fig trees and their wasp pollinators is a model system for many ecological and evolutionary studies. However, the immature stages of pollinating fig wasps have rarely been studied. We monitored developing fig wasps of known ages and performed a series of dissections at 24 h intervals to identify key developmental traits of Ceratosolen solmsi marchali Mayr (Hymenoptera: Agaonidae), a pollinator of Ficus hispida L. (Moraceae). We identified where in the Ficus ovary eggs were deposited and time to hatch. We were also able to identify the timing and key underlying characters of five larval instars, three sub-pupal stages, and a single prepupal stage. We provide detailed morphological descriptions for the key stages and report some behavioral observations of the wasps in the several developmental stages we recorded. Scanning electron microscope images were taken.

The effect of direct current (dc) substrate bias on the promotion of nanocrystallization in Si network has been studied, specifically within He-diluted SiH4 plasma in radio frequency (RF)-plasma-enhanced chemical vapor deposition. In view of organizing nanocrystallinity, controlled transmission of energy to the growing surface is needed and that is obtainable from metastable helium (He*) bombardment and, in particular, ionic helium (He+) bombardment under negative substrate bias. The structural morphology has been adequately regulated to a homogeneous network restraining from an exclusive columnar structure that is coherent to low-temperature growth. Notable improvements in the film quality in terms of enhanced crystallinity with low hydrogen content as well as reduced incubation volume, bulk void, and surface roughness have been demonstrated, even at low substrate temperature and low RF power. Use of appropriate dc substrate-bias has been identified as a supplementary parameter efficiently organizing the growth, making it more device-friendly.

Male and female Schistosoma japonicum worms have dissimilar appearances in their final host. In this study, a morphometric and morphological assessment of whole worms derived from unisexual and mixed infections in mice was conducted using confocal laser scanning microscopy. Worms from mixed infections showed significant morphological changes between 15 and 25 days post-infection (PI). On the fifteenth day PI, 33% of males had formed the conspicuous gynecophoric canal, but only 8% of them had testicular lobes containing a few germinative cells; 13% of females had incipient ovaries with a few immature ovarian cells inside. On the twentieth day PI, the testicular lobes contained more germinative cells in all male worms, while female worms presented vitelline glands. On the twenty-fifth day PI, more germinative cells were observed in the male testicular lobes, and differentiated cells were present in the female ovaries. All worms had fully developed reproductive organs from 30 days PI onwards. Morphometric analysis showed significant differences between mixed and unisexual infections at 35 days PI. Ovaries of worms from unisexual infections contained cells in one stage of maturation and vitelline glands had undifferentiated cells. Our study of S. japonicum provides a detailed comparison of different morphological traits from worms of mixed and unisexual infections throughout development.

The electronic transport and magnetic properties of nanocomposites, in which nanoparticles of superconducting (SC) molybdenum carbides are embedded in a ferromagnetic (FM) carbon matrix to form a three-dimensional SC-FM network, are studied. The high-resolution transmission electron microscope observation shows that the carbon in the nanocomposites is in both ordered and disordered forms. The magnetic properties of the nanocomposites are ruled by the ferromagnetic carbon matrix. The temperature dependence of electrical resistivity of the nanocomposites is dominated by the carbon matrix, showing the semi-conductivity. The special I-V curves near the zero voltage bias of the nanocomposites are observed at low temperatures, due to the influence of contact barriers between molybdenum carbides and the carbon matrix.

A trivalent vector containing genes of Watermelon mosaic virus (WMV) coat protein (CP), and replicase genes of Zucchini yellow mosaic virus (ZYMV) and Cucumber mosaic virus (CMV), was constructed for transformation of watermelon (Citrullus lanatus) plants, mediated by Agrobacterium tumefaciens. The integrated foreign genes were identified in the regenerated progenies by polymerase chain reaction (PCR) and Southern blots. The transformation efficiency was about 1.7‰. Resistance to virus infection was determined by mechanical inoculation in the greenhouse and by field trials. The transgenic watermelon lines showed different phenotypes of susceptible, resistant, immune or recovery from virus infections in the late growth stage. A relatively high level of resistance was shown by T3 plants of the line BH1-7. This result indicates the possibility of creating, by transgenic protocols, new varieties of watermelon resistant to viral infection.