The dynamics of small-scale structures in free-surface turbulence is crucial to large-scale phenomena in natural and industrial environments. Here, we conduct experiments on the quasi-flat free surface of a zero-mean-flow turbulent water tank over the Reynolds number range $Re_{\lambda } = 207$–312. By seeding microscopic floating particles at high concentrations, the fine scales of the flow and the velocity-gradient tensor are resolved. A kinematic relation is derived expressing the contribution of surface divergence and vorticity to the dissipation rate. The probability density functions of divergence, vorticity and strain rate collapse once normalised by the Kolmogorov scales. Their magnitude displays strong intermittency and follows chi-square distributions with power-law tails at small values. The topology of high-intensity events and two-point statistics indicate that the surface divergence is characterised by dissipative spatial and temporal scales, while the high-vorticity and high-strain-rate regions are larger, long-lived, concurrent and elongated. The second-order velocity structure functions obey the classic Kolmogorov scaling in the inertial range when the dissipation rate on the surface is considered, with a different numerical constant than in three-dimensional turbulence. The cross-correlation among divergence, vorticity and strain rate indicates that the surface-attached vortices are strengthened during downwellings and diffuse when those dissipate. Sources (sinks) in the surface velocity fields are associated with strong (weak) surface-parallel stretching and compression along perpendicular directions. The floating particles cluster over spatial and temporal scales larger than those of the sinks. These results demonstrate that, compared with three-dimensional turbulence, in free-surface turbulence the energetic scales leave a stronger imprint on the small-scale quantities.

We studied flow organization and heat transfer properties in mixed turbulent convection within Poiseuille–Rayleigh–Bénard channels subjected to temporally modulated sinusoidal wall temperatures. Three-dimensional direct numerical simulations were performed for Rayleigh numbers in the range $10^6 \leqslant Ra \leqslant 10^8$, a Prandtl number $Pr = 0.71$ and a bulk Reynolds number $Re_b \approx 5623$. We found that high-frequency wall temperature oscillations had minimal impact on flow structures, while low-frequency oscillations induced adaptive changes, forming stable stratified layers during cooling. Proper orthogonal decomposition (POD) analysis revealed a dominant streamwise unidirectional shear flow mode. Large-scale rolls oriented in the streamwise direction appeared as higher POD modes and were significantly influenced by lower-frequency wall temperature variations. Long-time-averaged statistics showed that the Nusselt number increased with decreasing frequency by up to 96 %, while the friction coefficient varied by less than 15 %. High-frequency modulation predominantly influenced near-wall regions, enhancing convective effects, whereas low frequencies reduced these effects via stable stratified layer formation. Phase-averaged statistics showed that high-frequency modulation resulted in phase-stable streamwise velocity and temperature profiles, while low-frequency modulation caused significant variations due to weakened turbulence. Turbulent kinetic energy (TKE) profiles remained high near the wall during both heating and cooling at high frequency, but decreased during cooling at low frequencies. A TKE budget analysis revealed that during heating, TKE production was dominated by shear near the wall and by buoyancy in the bulk region; while during cooling, the production, distribution and dissipation of TKE were all nearly zero.

Xiangranggounan is an intensively occupied settlement associated with the Kayue culture on the north-eastern Qinghai-Tibet Plateau. Excavations in 2022 and 2023 revealed five house types with clear stratigraphic relationships that help to expand current understanding of the evolution of prehistoric settlement patterns in harsh plateau environments.

This paper introduces a three-substrate layered transmitarray design that avoids the use of vias, aiming to produce broadband orbital angular momentum (OAM) vortex beams within the Ka-band. The suggested element configuration accomplishes a full 360∘ transmission phase while upholding a 1-dB transmission loss, with an overall thickness measuring 3.4 mm (equivalent to 0.34λ0 at 30.0 GHz). Its balanced unit cell arrangement amplifies its effectiveness in applications involving dual polarization. We examine the transmitarray behavior across four OAM modes (+1, +2, +3, +4 ), unveiling notable mode purity at operating frequency. Specifically, a broadband OAM vortex beam is achieved for the +1 mode during simulation. A square aperture transmitarray fed by a horn antenna is fabricated and measured to validate these simulated findings. Experimental results confirm the successful broadband vortex beam generation for $l = +1$ mode across the frequency spectrum from 27.0 to 40.0 GHz, approximately 43.3%. Additionally, the proposed transmitarray achieves a peak gain of 21.7 dBi, accompanied by an 11.8% aperture efficiency. Noteworthy is the consistent maintenance of mode purity above 86%.

To address the challenges of high-manoeuver targets and limited line-of-sight from the interceptor’s side window, this paper proposes a three-dimensional target manoeuver compensation control (TMCC) guidance law based on compensation function observe (CFO) and a method for studying the terminal guidance handover region. First, a relative model of the missile-target engagement is established. Secondly, the CFO is used to estimate the target manoeuver state, and the estimated information is fed back to the controller of the orbit control engine to make the interception more accurate. Considering the limited line of sight of the side window, the body line of sight angle is constrained by controlling the attitude control engine. Then, the problem description for solving the handover area and the definition of the terminal guidance handover area were provided, and the algorithm design for the handover area was conducted, simplifying the solving process through the concept of area substitution. Simulation results indicate that the proposed terminal guidance law offers higher interception accuracy compared to traditional proportional guidance, and effectively validates the accuracy of the handover region calculation.

In this paper, a large, compact array antenna that can be expanded in the 2-D plane is proposed for near-field radio frequency identification applications. By the introduction of the fractal structure and corner joint method, the array is easy to expand in the 2-D plane. An antenna element can be divided into a dozen or so loops, and traveling wave distribution makes sure that every loop is excited in a time period. So that a strong and uniform magnetic field could be generated in a large area. As a proof of concept, array antennas with $1 \times 8$, $2 \times 4$, and $3 \times 3$ elements are designed, fabricated, and measured. The measured bandwidth of the antennas covers the entire Chinese standard. Reading distances of the proposed large array antennas achieved up to 57 mm. Results show that the proposed antenna could realize flexibility and extendibility in a large area with stable and uniform magnetic field distribution.

Conservation agriculture (CA), as a key component of sustainable intensification, has been widely promoted across sub-Saharan Africa (SSA) to address low crop productivity. However, the focus has mainly been on improving cereal grain yields, with less focus to its impact on nutritional outcomes. This study sought to assess the productivity potential of CA crop diversification systems and associated crop establishment techniques in terms of grain, protein, and energy yields. An on-station trial was implemented in Malawi for four cropping seasons (2014/15 to 2017/18). Four crop establishment techniques (ridge and furrow, jab planter, dibble sticks, and CA basins) were tested, while cropping systems included conventional cropping system (Conv), CA sole cropping (CaSole), CA intercropping (CA-intercropping), and CA rotations (CA-rotation). In 2014/15 and 2015/16 cropping seasons, characterised by medium and low rainfall, respectively, planting basins and ridge-furrow systems produced higher maize yields compared to jab planter and dibble stick systems. In 2015/16, big and small basins yielded 5061 and 3969 kg ha–1, while jab planter and dibble stick yielded 3476 and 3213 kg ha–1. When there was high and persistent rainfall (2016/17 and 2017/18), direct seeding (jab planter and dibble stick) outperformed basins and ridge-furrow systems. Therefore, the choice of planting basin sizes and whether or not to use dibble stick and jab planter needs to be guided by location or site-specific seasonal forecasts for best results. Grain yield in maize-legume rotation systems consistently outperformed other systems, with maize-groundnut rotations surpassing maize-cowpea intercrops by 987–2700 kg ha–1 over four cropping seasons. In intercropping systems, maize-pigeon pea outperformed maize-cowpea by 4–45% during the same period, while maize-cowpea rotation consistently out yielded maize-cowpea intercropping. Intercropping systems, however, provided substantial protein benefits, with maize-pigeon yielding +9.5% (2015/2016), +29.1% (2016/2017) over CA sole, and +2.2% (2017/2018) over cowpea intercropping. Sole systems (conventional and CA sole) yielded the highest caloric energy, while maize-cowpea rotation consistently reduced energy yield by 35% to 54% compared to the highest-yielding systems. Overall intercropping systems can outperform rotation systems in nutritional security but when focus is on maize grain yield alone, intercropping may reduce maize yield when compared to both cereal sole and maize-legume rotation systems.

On the Experimental Advanced Superconducting Tokamak (EAST), the electron cyclotron wave (ECW) and lower hybrid wave (LHW) are actively used to achieve a high-performance plasma. Turbulence associated with the combined heating experiment is studied numerically based on the gyrokinetic toroidal code (GTC). The linear simulation results show that the unstable mode peaks at $k_{\theta }\rho _{s}\approx 0.65$ and $k_{\theta }\rho _{s}\approx 1.42$. Meanwhile, all of the frequencies of these instabilities are positive, which suggests that the collisionless trapped electron mode (CTEM) is the dominant instability. In the process of nonlinear simulations, a higher transport level is locally achieved during the two waves combined heating due to a formation of a steeper electron temperature gradient. In addition, a low-frequency geodesic acoustic mode (GAM) is observed in the nonlinear stage. Effects of the electron beta, the dimensionless ratio of $T_e/T_i$ and $R/L_{T_e}$ on the growth rate of instability, are also discussed in the paper.

Despite global efforts to end tuberculosis (TB), the goal of preventing catastrophic health expenditure (CHE) due to TB remains unmet. This cross-sectional study was conducted in Guizhou Province, Southwest China. Data were collected from the Hospital Information System and a survey of TB patients who had completed standardized antituberculosis treatment between January and March 2021. Among the 2 283 participants, the average total expenditure and out-of-pocket expenditure were $1 506.6 (median = $760.5) and $683.6 (median = $437.8), respectively. Health insurance reimbursement reduced CHE by 16.8%, with a contribution rate of 24.9%, and the concentration index changed from -0.070 prereimbursement to -0.099 postreimbursement. However, the contribution of health insurance varied significantly across different economic strata, with contribution rates of 6.4% for the lowest economic group and 53.1% for the highest group. For patients from lower socioeconomic strata, health insurance contributed 10.7% to CHE in the prediagnostic phase and 23.5% during treatment. While social health insurance alleviated the financial burden for TB patients, it did not provide sufficient protection for those in lower economic strata or during the prediagnostic stage. This study underscores the need for more effective and equitable subsidy policies for TB patients .

The simulation of rarefied gas flow based on the Boltzmann equation is challenging, especially when the gas mixtures have disparate molecular masses. In this paper, a computationally tractable kinetic model is proposed for monatomic gas mixtures, to mimic the Boltzmann collision operator as closely as possible. The intra- and inter-collisions are modelled separately using relaxation approximations, to correctly recover the relaxation time scales that could span several orders of magnitude. The proposed kinetic model preserves the accuracy of the Boltzmann equation in the continuum regime by recovering four critical transport properties of a gas mixture: the shear viscosity, the thermal conductivity, the coefficients of diffusion and the thermal diffusion. While in the rarefied flow regimes, the kinetic model is found to be accurate when comparing its solutions with those from the direct simulation Monte Carlo method in several representative cases (e.g. one-dimensional normal shock wave, Fourier flow and Couette flow, two-dimensional supersonic flow passing a cylinder and nozzle flow into a vacuum), for binary mixtures with a wide range of mass ratios, species concentrations and different intermolecular potentials. Pronounced separations in species properties have been observed, and the flow characteristics of gas mixtures in shock waves are found to change as the molecular mass ratio increases from 10 to 1000.

In this paper, a high-order-mode (HOM) (TE330) cavity-fed 45° linear polarized 6×6 slot array antenna is proposed. The 45° linear polarization is achieved by introducing asymmetric cross slots on the HOM cavity, resulting in low profile and wide bandwidth. The antenna array was verified using standard printed circuit board technology. Measured results show that the impedance bandwidth ( $|S_{11}|\le$ −10 dB) is 13.9% (36.98–42.92 GHz), and the peak gain is 19.3 dBi with a 3-dB gain bandwidth of 13.6%. Attributed to its simple structure, low profile, and wide bandwidth, the presented antenna is a good candidate for 5G applications.

The AIMTB rapid test assay is an emerging test, which adopted a fluorescence immunochromatographic assay to measure interferon-γ (IFN-γ) production following stimulation of effector memory T cells in whole blood by mycobacterial proteins. The aim of this article was to explore the ability of AIMTB rapid test assay in detecting Mycobacterium tuberculosis (MTB) infection compared with the widely applied QuantiFERON-TB Gold Plus (QFT-Plus) test among rural doctors in China. In total, 511 participants were included in the survey. The concordance between the QFT-Plus test and the AIMTB rapid test assay was 94.47% with a Cohen’s kappa coefficient (κ) of 0.84 (95% CI, 0.79–0.90). Improved concordance between the two tests was observed in males and in participants with 26 or more years of service as rural doctors. The quantitative values of the QFT-Plus test was higher in individuals with a result of QFT-Plus-/AIMTB+ as compared to those with a result of QFT-Plus-/AIMTB- (p < 0.001). Overall, our study found that there was an excellent consistency between the AIMTB rapid test assay and the QFT-Plus test in a Chinese population. As the AIMTB rapid test assay is fast and easy to operate, it has the potential to improve latent tuberculosis infection testing and treatment at the community level in resource-limited settings.

Human alveolar echinococcosis is a hard-to-treat and largely untreated parasitic disease with high associated health care costs. The current antiparasitic treatment for alveolar echinococcosis relies exclusively on albendazole, which does not act parasiticidally and can induce severe adverse effects. Alternative, and most importantly, improved treatment options are urgently required. A drug repurposing strategy identified the approved antimalarial pyronaridine as a promising candidate against Echinococcus multilocularis infections. Following a 30-day oral regimen (80 mg kg−1 day−1), pyronaridine achieved an excellent therapeutic outcome in a clinically relevant hepatic alveolar echinococcosis murine model, showing a significant reduction in both metacestode size (72.0%) and counts (85.2%) compared to unmedicated infected mice, which revealed significantly more potent anti-echinococcal potency than albendazole treatment at an equal dose (metacestode size: 42.3%; counts: 4.1%). The strong parasiticidal activity of pyronaridine was further confirmed by the destructive damage to metacestode tissues observed morphologically. In addition, a screening campaign combined with computational similarity searching against an approved drug library led to the identification of pirenzepine, a gastric acid-inhibiting drug, exhibiting potent parasiticidal activity against protoscoleces and in vitro cultured small cysts, which warranted further in vivo investigation as a promising anti-echinococcal lead compound. Pyronaridine has a known drug profile and a long track record of safety, and its repurposing could translate rapidly to clinical use for human patients with alveolar echinococcosis as an alternative or salvage treatment.

Revealing the impact of forest succession processes on changes in plant diversity is crucial for understanding the mechanisms that maintain plant diversity across various succession stages. While previous research has predominantly focused on the influence of environmental factors or management strategies on plant diversity within rubber plantation understories, there is a scarcity of studies examining the effects of forest succession processes on plant diversity. This study focuses on the plant diversity of the understory herbaceous layer within the rubber forest of the Yinggeling area, located in National Park of Hainan Tropical Rainforest. It employs a spatial analysis approach, rather than a temporal one, to examine the characteristics of the understory herbaceous community. The findings revealed that (1) The understory of Yinggeling rubber plantations harbors 175 plant species from 149 genera and 75 families, with Gramineae and Rubiaceae representing 46.45% of total species. And the dominant families are Rubiaceae, Gramineae, and Moraceae, with Ficus and Pteris being the dominant genera. (2) The dominant species vary with succession duration, with Tetrastigma pachyphyllum dominating in 0-year succession, Paspalum conjugatum in 3-year succession, and Microstegium fasciculatum in 7-year succession. (3) Diversity indices such as the Shannon–Wiener index, Simpson index, and Pielou index peak at 7 years of natural succession, while the species richness is highest at 3 years. (4) The similarity coefficient between understory herbaceous plant communities in rubber plantations undergoing 0 and 3 years of natural succession is highest 0.56, indicating a significant similarity, while similarity is lowest between 0 and 7 years of succession. This research shows that natural restoration helps increase species diversity in the understory herb layer of rubber forests. Succession leads to changes in the dominant families, genera, and species of the herbaceous layer. This change can be attributed to the intraspecific competition and ecological competition that occur during the succession process, leading to changes in biological and resource allocation.

In this paper, a novel tensioning and relaxing wearable system is introduced to improve the wearing comfort and load-bearing capabilities of knee exoskeletons. The research prototype of the novel system, which features a distinctive overrunning clutch drive, is presented. Through co-simulation with ANSYS, MATLAB, and SOLIDWORKS software, a comprehensive multi-objective optimization is performed to enhance the dynamics performance of the prototype. Firstly, the wearing contact stiffness of the prototype and the mechanical parameters of the relevant materials are simulated and fitted based on the principle of functional equivalence. And then, its equivalent nonlinear circumferential stiffness model is obtained. Secondly, to enhance the wearing comfort of the exoskeleton, a novel comprehensive performance evaluation index, termed wearing comfort, is introduced. The index considers multiple factors such as the duration of vibration transition, the acceleration encountered during wear, and the average pressure applied. Finally, through the utilization of this indicator, the system’s dynamics performance is optimized via multi-platform co-simulation, and the simulation results validate the effectiveness of the research method and the proposed wearable comfort index. The theoretical basis for the subsequent research on the effectiveness of prototype weight-bearing is provided.