A high-energy pulsed vacuum ultraviolet (VUV) solid-state laser at 177 nm with high peak power by the sixth harmonic of a neodymium-doped yttrium aluminum garnet (Nd:YAG) amplifier in a KBe2BO3F2 prism-coupled device was demonstrated. The ultraviolet (UV) pump laser is a 352 ps pulsed, spatial top-hat super-Gaussian beam at 355 nm. A high energy of a 7.12 mJ VUV laser at 177 nm is obtained with a pulse width of 255 ps, indicating a peak power of 28 MW, and the conversion efficiency is 9.42% from 355 to 177 nm. The measured results fitted well with the theoretical prediction. It is the highest pulse energy and highest peak power ever reported in the VUV range for any solid-state lasers. The high-energy, high-peak-power, and high-spatial-uniformity VUV laser is of great interest for ultra-fine machining and particle-size measurements using UV in-line Fraunhofer holography diagnostics.

Few studies have evaluated the joint effect of trace elements on spontaneous preterm birth (SPTB). This study aimed to examine the relationships between the individual or mixed maternal serum concentrations of Fe, Cu, Zn, Se, Sr and Mo during pregnancy, and risk of SPTB. Inductively coupled plasma MS was employed to determine maternal serum concentrations of the six trace elements in 192 cases with SPTB and 282 controls with full-term delivery. Multivariate logistic regression, weighted quantile sum regression (WQSR) and Bayesian kernel machine regression (BKMR) were used to evaluate the individual and joint effects of trace elements on SPTB. The median concentrations of Sr and Mo were significantly higher in controls than in SPTB group (P < 0·05). In multivariate logistic regression analysis, compared with the lowest quartile levels of individual trace elements, the third- and fourth-quartile Sr or Mo concentrations were significantly associated with reduced risk of SPTB with adjusted OR (aOR) of 0·432 (95 CI < 0·05). In multivariate logistic regression analysis, compared with the lowest quartile levels of individual trace elements, the third- and fourth-quartile Sr or Mo concentrations were significantly associated with reduced risk of SPTB with adjusted aOR of 0·432 (95 % CI 0·247, 0·756), 0·386 (95 % CI 0·213, 0·701), 0·512 (95 % CI 0·297, 0·883) and 0·559 (95 % CI 0·321, 0·972), respectively. WQSR revealed the inverse combined effect of the trace elements mixture on SPTB (aOR = 0·368, 95 % CI 0·228, 0·593). BKMR analysis confirmed the overall mixture of the trace elements was inversely associated with the risk of SPTB, and the independent effect of Sr and Mo was significant. Our findings suggest that the risk of SPTB decreased with concentrations of the six trace elements, with Sr and Mo being the major contributors.

The hydraulic conductivity of geosynthetic clay liners (GCLs) is not fully understood and certain gaps in knowledge are still present, such as the effect of coupled mechanical and chemical processes. The current study aimed to develop a simplified mathematical model to predict the hydraulic conductivity of GCLs, particularly regarding the coupled effects of mechanical and chemical processes. Based on Darcy's Law and Poiseuille’s Law, the method combines diffuse double layer (DDL) theory and fractal theory. External factors such as confining pressure and the concentration of the permeating solution, and inherent properties such as exchangeable cations, ionic radius, montmorillonite surface fractal dimension, the distance between two montmorillonite layers (m) after swelling at the exchangeable cation i (i denotes the primary exchangeable cations, such as Na+, Ca2+, K+, and Mg2+ in bentonite), density, and coefficient of viscosity of interlayer water between two montmorillonite layers, were considered. The proposed theoretical model gave relatively accurate predictions. A practical estimate of GCL hydraulic conductivity was also derived. The predictions were compared with experimental results and good qualitative agreement was found. From the experimental results, the proposed prediction model has a maximum deviation of ~1:10–10:1, and the empirical model has a mean deviation of ~1:15–15:1.

The production and industrial use of asbestos cement and other asbestos-containing materials have been restricted in most countries because of the potential detrimental effects on human health and the environment. Chrysotile is the most common form of asbestos and investigations into how to recycle this serpentine phyllosilicate mineral have attracted extensive attention. Chrysotile asbestos tailings can be transformed thermally, at high temperature, by in situ carbothermal reduction (CR). The CR method aims to maximize use of the chrysotile available and uses high temperatures and carbon to change the mineral form and structure of the chrysotile asbestos tailings. When chrysotile asbestos is employed as the raw material and coke (carbon) powder is used as the reducing agent for CR transformation, stable, high-temperature composites consisting of forsterite, stishovite, and silicon carbide are formed. Forsterite (Mg2SiO4) was the most abundant crystalline phase formed in samples heat treated below 1500ºC. At 1600ºC, forsterite was exhausted through decomposition and β-SiC formed by reduction of stishovite. A larger proportion of β-SiC was generated as the carbon content was increased. This research revealed that both temperature and carbon addition play key roles in the transformation of chrysotile asbestos tailings.

As intense, ultrashort, kHz-repetition-rate laser systems become commercially available, pulse cumulative effects are critical for laser filament-based applications. In this work, the pulse repetition-rate effect on femtosecond laser filamentation in air was investigated both numerically and experimentally. The pulse repetition-rate effect has negligible influence at the leading edge of the filament. Clear intensity enhancement from a high-repetition pulse is observed at the peak and tailing edge of the laser filament. As the repetition rate of the laser pulses increases from 100 to 1000 Hz, the length of the filament extends and the intensity inside the filament increases. A physical picture based on the pulse repetition-rate dependent ‘low-density hole’ effect on filamentation is proposed to explain the obtained results well.

Mechanistic studies have suggested that antioxidants have beneficial effects on age-related macular degeneration (AMD). This study aimed to investigate the association between the types and sources of dietary vitamin and carotenoid intakes and AMD risk in China. A matched case–control study of 260 AMD cases and 260 matched controls was performed. The participants were interviewed for dietary information and potential confounders, and comprehensive ophthalmic examinations were performed. Conditional logistic models were used to estimate the odds ratio (OR) and 95 % confidence interval (CI) of specific vitamins and carotenoids and their main sources. When comparing the extreme quartiles, the ORs (95 % CI) were 0·30 (0·10, 0·88) for lutein and 0·28 (0·11, 0·74) for β-cryptoxanthin. The associations for other dietary vitamin and carotenoid intakes were generally weaker and non-significant. Higher intakes of spinach and egg, which are important sources of lutein, were associated with a reduced odds of AMD. ORs (95% CIs) comparing extreme categories were 0·42 (0·20, 0·88) for spinach and 0·52 (95% CI: 0·27, 0·98) for egg. Participants who were in the highest category of both egg intake and spinach intake had a much greater reduced odds of having AMD (OR: 0·23; 95% CI: 0·08, 0·71) than those in the lowest category of egg intake and spinach intake. In conclusion, a higher intake of lutein and lutein-rich foods was associated with a significantly decreased odds of AMD. These findings provide further evidence of the benefits of lutein and lutein-rich foods in the prevention of AMD.

Having enterprises engaged in environmentally friendly behavior is an important part of reducing negative environmental impacts. This study makes a quantitative analysis against the backdrop of China's transitional economic system. The results show that politically-connected enterprises significantly reduce environmental expenditure, but this only holds for state-owned enterprises; private enterprises with political connections spend significantly more. Analysis of the efficiency of environmental expenditure indicates that, for private enterprises, environmental spending is used as a way to maintain political connections, with rent-seeking as the likely motivation. Politically-connected private enterprises have not reduced their emissions to the same extent as state-owned enterprises, despite increased expenditure. Given the scale of environmental degradation in China during a period of massive economic and social upheaval, the results of this analysis provide a quantitative case for policy change: governments should shift focus to the results that environmental spending produces.

Ketosis is a metabolic disease of dairy cows often characterized by high concentrations of ketone bodies and fatty acids, but low milk protein and milk production. The Janus kinase 2 (JAK2)-signal transducer and activator of transcription 5 (STAT5) and the mechanistic target of rapamycin (mTOR) signaling pathways are central for the regulation of milk protein synthesis. The effect of high levels of fatty acids on these pathways and β-casein synthesis are unknown in dairy cows with clinical ketosis. Mammary gland tissue and blood samples were collected from healthy (n = 15) and clinically-ketotic (n = 15) cows. In addition, bovine mammary epithelial cells (BMEC) were treated with fatty acids, methionine (Met) or prolactin (PRL), respectively. In vivo, the serum concentration of fatty acids was greater (P > 0.05) and the percentage of milk protein (P > 0.05) was lower in cows with clinical ketosis. The JAK2-STAT5 and mTOR signaling pathways were inhibited and the abundance of β-casein was lower in mammary tissue of cows with clinical ketosis (P > 0.05). In vitro, high levels of fatty acids inhibited the JAK2-STAT5 and mTOR signaling pathways (P > 0.05) and further decreased the β-casein synthesis (P > 0.05) in BMEC. Methionine or PRL treatment, as positive regulators, activated the JAK2-STAT5 and mTOR signaling pathways to increase the β-casein synthesis. Importantly, the high concentration of fatty acids attenuated the positive effect of Met or PRL on mTOR, JAK2-STAT5 pathways and the abundance of β-casein (P > 0.05). Overall, these data indicate that the high concentrations of fatty acids that reach the mammary cells during clinical ketosis inhibit mTOR and JAK2-STAT5 signaling pathways, and further suppress β-casein synthesis.

Synaptotagmin 1 (Syt1) is an abundant and important presynaptic vesicle protein that binds Ca2+ for the regulation of synaptic vesicle exocytosis. Our previous study reported its localization and function on spindle assembly in mouse oocyte meiotic maturation. The present study was designed to investigate the function of Syt1 during mouse oocyte activation and subsequent cortical granule exocytosis (CGE) using confocal microscopy, morpholinol-based knockdown and time-lapse live cell imaging. By employing live cell imaging, we first studied the dynamic process of CGE and calculated the time interval between [Ca2+]i rise and CGE after oocyte activation. We further showed that Syt1 was co-localized to cortical granules (CGs) at the oocyte cortex. After oocyte activation with SrCl2, the Syt1 distribution pattern was altered significantly, similar to the changes seen for the CGs. Knockdown of Syt1 inhibited [Ca2+]i oscillations, disrupted the F-actin distribution pattern and delayed the time of cortical reaction. In summary, as a synaptic vesicle protein and calcium sensor for exocytosis, Syt1 acts as an essential regulator in mouse oocyte activation events including the generation of Ca2+ signals and CGE.

The aim of the present study was to explore the influence of tea consumption on diabetes mellitus in the Chinese population. This multi-centre, cross-sectional study was conducted in eight sites from south, east, north, west and middle regions in China by enrolling 12 017 subjects aged 20–70 years. Socio-demographic and general information was collected by a standardised questionnaire. A standard procedure was used to measure anthropometric characteristics and to obtain blood samples. The diagnosis of diabetes was determined using a standard 75-g oral glucose tolerance test. In the final analysis, 10 825 participants were included and multiple logistic models and interaction effect analysis were applied for assessing the association between tea drinking with diabetes. Compared with non-tea drinkers, the multivariable-adjusted OR for newly diagnosed diabetes were 0·80 (95 % CI 0·67, 0·97), 0·88 (95 % CI 0·71, 1·09) and 0·86 (95 % CI 0·67, 1·11) for daily tea drinkers, occasional tea drinkers and seldom tea drinkers, respectively. Furthermore, drinking tea daily was related to decreased risk of diabetes in females by 32 %, elderly (>45 years) by 24 % and obese (BMI > 30 kg/m2) by 34 %. Moreover, drinking dark tea was associated with reduced risk of diabetes by 45 % (OR 0·55; 95 % CI 0·42, 0·72; P < 0·01). The results imply that drinking tea daily was negatively related to risk of diabetes in female, elderly and obese people. In addition, drinking dark tea was associated with decreased risk of type 2 diabetes mellitus.

Surface molecularly imprinted polymer of solanesol (SA-SMIP) was prepared by reversed phase suspension polymerization using modified titanium dioxide (TiO2) as carrier, and operation conditions were investigated and optimized. Structures of modified TiO2 and SA-SMIP obtained at optimal conditions were characterized by Fourier transform infrared spectrometer adopting original TiO2 and non-surface molecularly imprinted polymer as reference. The SA-SMIP synthesized under optimal conditions displayed an excellent recognition of SA from the mixture of SA and triacontanol. The maximum separation degree of SA was 2.90. Finally, the adsorption kinetics and isotherm were investigated and analyzed. Adsorption kinetics results indicated that the adsorption of SA-SMIP to SA was a pseudo-second order process, and the adsorption of beginning and later stages was controlled by homogeneous particle diffusion and adsorption reaction process, respectively. Adsorption isotherm results documented hereby were two sorts of bonding sites, complete imprinted cavities and defective imprinted cavities. The adsorption for two bonding sites could be well lined up with the Langmuir model.

In this work, flavonoids in Polygonum cuspidatum Sieb. et Zucc. were extracted by ultrasound-assisted methodology and determined by ultraviolet–visible spectrophotometry. After that, extraction conditions were optimized by the single fact investigation, the central composite design, and response surface methodology (RSM) in turn. The results showed the optimal values of ethanol concentration, solid–liquid ratio, extraction temperature, extraction time, ultrasonic power, and number of extraction times were 60%, 1:20 (g/mL), 45 °C, 34 min; 80 W, and 5, respectively. The extraction ratio of flavonoids could be as high as 94.50%. The influence order of each factor was ultrasonic power > extraction time > extraction temperature > ethanol concentration. The results also showed that the experimental value was close to the predicted value (94.49%) of the established model by RSM, which proved that the established model was reasonable. The thermodynamic results showed that the extraction process was endothermic and could proceed spontaneously.

A field study to optimize the nitrogen (N) top-dressing mode of panicle fertilization and improve rice yields was conducted in mid-eastern China. Japonica cultivar Yunongjing-6 was grown and panicle N fertilizer was applied at the beginning of the inverted fourth leaf stage using three different modes: manual broadcast application (BA) on the soil surface as a control treatment, deep application during ditching at a depth of 15 cm (DD) and manual BA on the soil surface during deep ditching (BAD). The activity of soil enzymes, including invertase, urease, phosphatase and catalase, was increased significantly at the jointing, booting and grain-filling stages with the DD and BAD treatments compared with the traditional BA mode. The DD and BAD treatments also increased basal internode and neck-panicle internode bleeding intensity. The DD treatment gave the highest crop yield, increasing the yield by 0.63 and 0.31 t/hm2 in 2011 and 2012, respectively, compared with BA. The results suggest that ditching during panicle N fertilizer application after sun-drying of the fields increases rice yields, most likely by improving the activity of soil enzymes and enhancing the physiological activity of roots and grain weight.

In the design process, different problem statements result in different problem-solving strategies. A proper problem statement is the key to effective problem-solving. Based on the characteristics of the product design process, we divided design problem statements into open-ended (OE), decision-making (DM), and constrained (CO) statements and attempted to investigate the influences of different problem statements on designers’ cognitive behaviors from three perspectives, namely divergent thinking, convergent thinking, and mental workload. Then we provided quantification description to these influences based on electroencephalography (EEG) technology. We conducted experiments on 19 participants and used the BrainProduct™ actiChamp-32 to record the EEG data. Results are as follows: (1) The higher task-related α power was found in the temporal and occipital regions in the OE task compared with that in the DM and CO tasks. The OE statement also would help designers get novel ideas by strengthening their divergent thinking. (2) In the DM and CO tasks, there was no significant difference in the impact of the brain region on convergent thinking, but activities in the left hemisphere were stronger than that in the right hemisphere. The DM and CO tasks have better performance in convergent thinking than the OE task. (3) In the CO task, the designer's mental workload is the highest and mainly related to the activation of the centroparietal and occipital regions. These findings help designers understand the design problem-solving process from the perspective of cognitive science and monitor their thinking modes in the design process so as to improve their design performance.