In this paper, a high-order-mode (HOM) (TE330) cavity-fed 45° linear polarized 6×6 slot array antenna is proposed. The 45° linear polarization is achieved by introducing asymmetric cross slots on the HOM cavity, resulting in low profile and wide bandwidth. The antenna array was verified using standard printed circuit board technology. Measured results show that the impedance bandwidth ( $|S_{11}|\le$ −10 dB) is 13.9% (36.98–42.92 GHz), and the peak gain is 19.3 dBi with a 3-dB gain bandwidth of 13.6%. Attributed to its simple structure, low profile, and wide bandwidth, the presented antenna is a good candidate for 5G applications.

Revealing the impact of forest succession processes on changes in plant diversity is crucial for understanding the mechanisms that maintain plant diversity across various succession stages. While previous research has predominantly focused on the influence of environmental factors or management strategies on plant diversity within rubber plantation understories, there is a scarcity of studies examining the effects of forest succession processes on plant diversity. This study focuses on the plant diversity of the understory herbaceous layer within the rubber forest of the Yinggeling area, located in National Park of Hainan Tropical Rainforest. It employs a spatial analysis approach, rather than a temporal one, to examine the characteristics of the understory herbaceous community. The findings revealed that (1) The understory of Yinggeling rubber plantations harbors 175 plant species from 149 genera and 75 families, with Gramineae and Rubiaceae representing 46.45% of total species. And the dominant families are Rubiaceae, Gramineae, and Moraceae, with Ficus and Pteris being the dominant genera. (2) The dominant species vary with succession duration, with Tetrastigma pachyphyllum dominating in 0-year succession, Paspalum conjugatum in 3-year succession, and Microstegium fasciculatum in 7-year succession. (3) Diversity indices such as the Shannon–Wiener index, Simpson index, and Pielou index peak at 7 years of natural succession, while the species richness is highest at 3 years. (4) The similarity coefficient between understory herbaceous plant communities in rubber plantations undergoing 0 and 3 years of natural succession is highest 0.56, indicating a significant similarity, while similarity is lowest between 0 and 7 years of succession. This research shows that natural restoration helps increase species diversity in the understory herb layer of rubber forests. Succession leads to changes in the dominant families, genera, and species of the herbaceous layer. This change can be attributed to the intraspecific competition and ecological competition that occur during the succession process, leading to changes in biological and resource allocation.

In this paper, a novel tensioning and relaxing wearable system is introduced to improve the wearing comfort and load-bearing capabilities of knee exoskeletons. The research prototype of the novel system, which features a distinctive overrunning clutch drive, is presented. Through co-simulation with ANSYS, MATLAB, and SOLIDWORKS software, a comprehensive multi-objective optimization is performed to enhance the dynamics performance of the prototype. Firstly, the wearing contact stiffness of the prototype and the mechanical parameters of the relevant materials are simulated and fitted based on the principle of functional equivalence. And then, its equivalent nonlinear circumferential stiffness model is obtained. Secondly, to enhance the wearing comfort of the exoskeleton, a novel comprehensive performance evaluation index, termed wearing comfort, is introduced. The index considers multiple factors such as the duration of vibration transition, the acceleration encountered during wear, and the average pressure applied. Finally, through the utilization of this indicator, the system’s dynamics performance is optimized via multi-platform co-simulation, and the simulation results validate the effectiveness of the research method and the proposed wearable comfort index. The theoretical basis for the subsequent research on the effectiveness of prototype weight-bearing is provided.

The absorption and distribution of radiocarbon-labeled urea at the ultratrace level were investigated with a 14C-AMS biotracer method. The radiopharmaceutical concentrations in the plasma, heart, liver, spleen, lung, kidney, stomach, brain, bladder, muscle, testis, and fat of rats after oral administration of 14C urea at ultratrace doses were determined by AMS, and the concentration-time curves in plasma and tissues and pharmacokinetic distribution data were obtained. This study provides an analytical method for the pharmacokinetic parameters and tissue distribution of exogenous urea in rats at ultratrace doses and explores the feasibility of evaluation and long-term tracking of ultratrace doses of drugs with AMS.

This paper retrospectively analysed the prevalence of macrolide-resistant Mycoplasma pneumoniae (MRMP) in some parts of China. Between January 2013 and December 2019, we collected 4,145 respiratory samples, including pharyngeal swabs and alveolar lavage fluid. The highest PCR-positive rate of M. pneumoniae was 74.5% in Beijing, the highest resistance rate was 100% in Shanghai, and Gansu was the lowest with 20%. The highest PCR-positive rate of M. pneumoniae was 74.5% in 2013, and the highest MRMP was 97.4% in 2019; the PCR-positive rate of M. pneumoniae for adults in Beijing was 17.9% and the MRMP was 10.48%. Among the children diagnosed with community-acquired pneumonia (CAP), the PCR-positive and macrolide-resistant rates of M. pneumoniae were both higher in the severe ones. A2063G in domain V of 23S rRNA was the major macrolide-resistant mutation, accounting for more than 90%. The MIC values of all MRMP to erythromycin and azithromycin were ≥ 64 μg/ml, and the MICs of tetracycline and levofloxacin were ≤ 0.5 μg/ml and ≤ 1 μg/ml, respectively. The macrolide resistance varied in different regions and years. Among inpatients, the macrolide-resistant rate was higher in severe pneumonia. A2063G was the common mutation, and we found no resistance to tetracycline and levofloxacin.

Intracytoplasmic sperm injection (ICSI) is a technique that directly injects a single sperm into the cytoplasm of mature oocytes. Here, we explored the safety of single-sperm cryopreservation applied in ICSI. This retrospective study enrolled 186 couples undergoing ICSI-assisted pregnancy. Subjects were allocated to the fresh sperm (group A)/single-sperm cryopreservation (group B) groups based on sperm type, with their clinical baseline/pathological data documented. We used ICSI-compliant sperm for subsequent in vitro fertilization and followed up on all subjects. The recovery rate/cryosurvival rate/sperm motility of both groups, the pregnancy/outcome of women receiving embryo transfer, and the delivery mode/neonatal-related information of women with successful deliveries were recorded. The clinical pregnancy rate, cumulative clinical pregnancy rate, abortion rate, ectopic pregnancy rate, premature delivery rate, live birth delivery rate, neonatal birth defect rate, and average birth weight were analyzed. The two groups showed no significant differences in age, body mass index, ovulation induction regimen, sex hormone [anti-Müllerian hormone (AMH)/follicle-stimulating hormone (FSH)/luteinizing hormone (LH)] levels, or oocyte retrieval cycles. The sperm recovery rate (51.72%-100.00%) and resuscitation rate (62.09% ± 16.67%) in group B were higher; the sperm motility in the two groups demonstrated no significant difference and met the ICSI requirements. Group B exhibited an increased fertilization rate, decreased abortion rate, and increased safety versus group A. Compared with fresh sperm, the application of single-sperm cryopreservation in ICSI sensibly improved the fertilization rate and reduced the abortion rate, showing higher safety.

A multi-band circularly polarized antenna is proposed for WLAN (2.4/5.3/5.8 GHz) and WiMAX (3.5 GHz) applications. The proposed antenna is constructed of a radiation patch and a reflecting metal ground. Characteristic mode theory is utilized to analyze the modes of the patch and based on these results the antenna is optimized. The −10 dB impedance bandwidths of the proposed antenna are 53.53% (2.4–4.15 GHz) and 47.28% (5.25–8.5 GHz), respectively. The antenna radiates left-handed circular polarization in the lower band and right-handed circular polarization in the upper band. A maximum gain of 10 dBic is achieved for the proposed antenna.

In preparation for an experiment with a laser-generated intense proton beam at the Laser Fusion Research Center at Mianyang to investigate the 11B(p,α)2α reaction, we performed a measurement at very low proton energy between 140 keV and 172 keV using the high-voltage platform at the Institute of Modern Physics, Lanzhou. The aim of the experiment was to test the ability to use CR-39 track detectors for cross-section measurements and to remeasure the cross-section of this reaction close to the first resonance using the thick target approach. We obtained the cross-section σ = 45.6 ± 12.5 mb near 156 keV. Our result confirms the feasibility of CR-39 type track detector for nuclear reaction measurement also in low-energy regions.

Isomorphous substitutions of Mg and Fe for Al generally appear in the octahedral sheets of montmorillonite, whereas they are infrequent in kaolinite. Therefore, the release of Mg and Fe from the octahedral sheets probably happens during the transformation of montmorillonite into kaolinite, which could affect the migration of Mg and Fe from clay minerals into surrounding environments. The objective of the current study was to investigate the relationship between Mg and Fe release during the transformation of montmorillonite into kaolinite. The results showed that the d060 value of clay minerals decreased slightly, and the intensities of both the AlMg–OH and AlFe–OH bending vibrations also decreased gradually. In addition, the (Mg+Fe)/Al (major octahedral ions) atomic ratio of kaolinite was lower than that of montmorillonite, especially in identical hydrothermal products. These results indicated that Mg and Fe ions were released progressively from the octahedral sheets during the transformation of montmorillonite into kaolinite. Moreover, the changed relative concentrations of Mg and Fe ions in the supernatant solutions after hydrothermal reactions suggested a random distribution of Mg and/or Fe in the octahedral sheets of the montmorillonite. These results improve understanding of the release relationship between Mg and Fe during clay mineral evolution and of the distribution of these two ions in the octahedral sheets, as well as the chemical composition of clay minerals as an indicator of geological environments.

Schistosomiasis, a parasite infectious disease caused by Schistosoma japonicum, often leads to egg granuloma and fibrosis due to the inflammatory reaction triggered by egg antigens released in the host liver. This study focuses on the role of the egg antigens CP1412 protein of S. japonicum (SjCP1412) with RNase activity in promoting liver fibrosis. In this study, the recombinant egg ribonuclease SjCP1412, which had RNase activity, was successfully prepared. By analysing the serum of the population, it has been proven that the anti-SjCP1412 IgG in the serum of patients with advanced schistosomiasis was moderately correlated with liver fibrosis, and SjCP1412 may be an important antigen associated with liver fibrosis in schistosomiasis. In vitro, the rSjCP1412 protein induced the human liver cancer cell line Hep G2 and liver sinusoidal endothelial cells apoptosis and necrosis and the release of proinflammatory damage-associated molecular patterns (DAMPs). In mice infected with schistosomes, rSjCP1412 immunization or antibody neutralization of SjCP1412 activity significantly reduced cell apoptosis and necroptosis in liver tissue, thereby reducing inflammation and liver fibrosis. In summary, the SjCP1412 protein plays a crucial role in promoting liver fibrosis during schistosomiasis through mediating the liver cells apoptosis and necroptosis to release DAMPs inducing an inflammatory reaction. Blocking SjCP1412 activity could inhibit its proapoptotic and necrotic effects and alleviate hepatic fibrosis. These findings suggest that SjCP1412 may be served as a promising drug target for managing liver fibrosis in schistosomiasis japonica.

The oscillatory Kelvin–Helmholtz (K–H) instability of a planar liquid sheet was experimentally investigated in the presence of an axial oscillating gas flow. An experimental system was initiated to study the oscillatory K–H instability. The surface wave growth rates were measured and compared with theoretical results obtained using the authors’ early linear method. Furthermore, in a larger parameter range experimentally studied, it is interesting that there are four different unstable modes: first disordered mode (FDM), second disordered mode (SDM), K–H harmonic unstable mode (KHH) and K–H subharmonic unstable mode (KHS). These unstable modes are determined by the oscillating amplitude, oscillating frequency and liquid inertia force. The frequencies of KHH are equal to the oscillating frequency; the frequency of KHS equals half the oscillating frequency, while the frequencies of FDM and SDM are irregular. By considering the mechanism of instability, the instability regime maps on the relative Weber number versus liquid Weber number (Werel–Wel) and the Weber number ratio versus the oscillating frequency (Werel/Wel–$\varOmega$s2) were plotted. Among these four modes, KHS is the most unexpected: the frequency of this mode is not equal to the oscillating frequency, but the surface wave can also couple with the oscillating gas flow. Linear instability theory was applied to divide the parameter range between the different unstable modes. According to linear instability theory, K–H and parametric unstable regions both exist. However, note that all four modes (KHH, KHS, FDM and SDM) corresponded primarily to the K–H unstable region obtained from the theoretical analysis. Nevertheless, the parametric unstable mode was also observed when the oscillating frequency and amplitude were relatively low, and the liquid inertia force was relatively high. The surface wave amplitude was small but regular, and the evolution of this wave was similar to that of Faraday waves. The wave oscillating frequency was half that of the surface wave.

As optical parametric chirped pulse amplification has been widely adopted for the generation of extreme intensity laser sources, nonlinear crystals of large aperture are demanded for high-energy amplifiers. Yttrium calcium oxyborate (YCa4O(BO3)3, YCOB) is capable of being grown with apertures exceeding 100 mm, which makes it possible for application in systems of petawatt scale. In this paper, we experimentally demonstrated for the first time to our knowledge, an ultra-broadband non-collinear optical parametric amplifier with YCOB for petawatt-scale compressed pulse generation at 800 nm. Based on the SG-II 5 PW facility, amplified signal energy of approximately 40 J was achieved and pump-to-signal conversion efficiency was up to 42.3%. A gain bandwidth of 87 nm was realized and supported a compressed pulse duration of 22.3 fs. The near-field and wavefront aberration represented excellent characteristics, which were comparable with those achieved in lithium triborate-based amplifiers. These results verified the great potential for YCOB utilization in the future.

In the Three Gorges and adjacent areas, there are three planation surfaces and five terraces along the Yangtze River that record the evolution history of the river system. Here, we used diagnostic heavy minerals, U-Pb geochronology, and trace elements of detrital zircons from one planation surface, two terraces, and a modern point bar to reconstruct the evolution history of the upper Yangtze River, specifically the Chuan River in the Sichuan Basin. The sediments in the lowest planation surface had different felsic source rocks derived from east of the Three Gorges, which indicated that before the disintegration of the lowest planation surface (0.75 Ma), there were two paleorivers: the westward-flowing paleo-Chuan River and eastward-flowing paleo-Yangtze River separated by the Huangling Dome. At 0.75–0.73 Ma, the dominant detrital zircons from the Sichuan Basin in the sediments of terrace T5 (the highest terrace) confirmed that the paleo-Yangtze River cut through the Three Gorges and captured the paleo-Chuan River, and the Daliang Mountains became the new drainage divide. Finally, the appearance of materials from the upper Jinsha River in terrace T2 indicated that the paleo-Yangtze River progressively captured the paleo-Jinsha River, and the modern upper Yangtze River formed before 0.05 Ma. These river capture events of the upper Yangtze River confirmed the Quaternary uplift of the SE Tibetan Plateau.

High-molecular-weight glutenin subunits (HMW-GS) contribute to dough elasticity and bread baking quality in wheat. In this study, wheat varieties were classified based on their HMW-GS composition into three groups: 1Dx5 (5 + 10, Gaoyou 8901, Xinmai 28, Xinmai 19, Xinmai 26 and Jinbaoyin), 1Dx2 (2 + 12, Zhoumai 24, Xinmai 9 and Yumai) and 1Dx4 (4 + 12, Aikang 58). Sequence analysis showed that 1Dx-GY8901, 1Dx-XM28, 1Dx-XM19 and 1Dx-XM26 were similar to the 1Dx5 gene and clustered on the same branch, while 1Dx-AK58, 1Dx-ZM24, 1Dx-JBY, 1Dx-YM, 1Dx-XM9 and 1Dx-JBY were more similar to the 1Dx2 gene and clustered on the same branch with 1Dx.2.2. There was a mutation of Ser to Cys at position S2, for an extra Cys in the repeat regions of 1Dx-XM19, 1Dx-XM26, 1Dx-XM28 and 1Dx-GY8901. The wheat HMW-GS genes exhibited similar percentages of α-helix, extended strand, β-turn and random coil structure, with ranges of 13.33–13.59, 4.77–5.78, 7.08–9.18 and 72.3–73.94%, respectively. Sequence conservation and the composition of HMW-GS subunits were also analysed for a series of strong gluten wheat varieties, Xinmai 9 (1, 7 + 8, 2 + 12), Xinmai 19 (1, 7 + 9, 5 + 10), Xinmai 26 (1, 7 + 8, 5 + 10) and Xinmai 28 (1, 7 + 9, 5 + 10). The results of this work should facilitate future breeding efforts and provide the theoretical basis for wheat quality improvement.