Nontuberculous mycobacteria (NTM) is a large group of mycobacteria other than the Mycobacterium tuberculosis complex and Mycobacterium leprae. Epidemiological investigations have found that the incidence of NTM infections is increasing in China, and it is naturally resistant to many antibiotics. Therefore, studies of NTM species in clinical isolates are useful for understanding the epidemiology of NTM infections. The present study aimed to investigate the incidence of NTM infections and types of NTM species. Of the 420 samples collected, 285 were positive for M. tuberculosis, 62 samples were negative, and the remaining 73 samples contained NTM, including 35 (8.3%) only NTM and 38 (9%) mixed (M. tuberculosis and NTM). The most prevalent NTM species were Mycobacterium intracellulare (30.1%), followed by Mycobacterium abscessus (15%) and M. triviale (12%). M. gordonae infection was detected in 9.5% of total NTM-positive cases. Moreover, this study reports the presence of Mycobacterium nonchromogenicum infection and a high prevalence of M. triviale for the first time in Henan. M. intracellulare is the most prevalent, accompanied by some emerging NTM species, including M. nonchromogenicum and a high prevalence of M. triviale in Henan Province. Monitoring NTM transmission and epidemiology could enhance mycobacteriosis management in future.

This study investigates the impacts of the timing of an extreme cyclone that occurred in August 2012 on the sea-ice volume evolution based on the Arctic Ice Ocean Prediction System (ArcIOPS). By applying a novel cyclone removal algorithm to the atmospheric forcing during 4–12 August 2012, we superimpose the derived cyclone component onto the atmospheric forcing one month later or earlier. This study finds that although the extreme cyclone leads to strong sea-ice volume loss in all runs, large divergence occurs in sea-ice melting mechanism in response to various timing of the cyclone. The extreme cyclone occurred in August, when enhanced ice volume loss is attributed to ice bottom melt primarily and ice surface melt secondarily. If the cyclone occurs one month earlier, ice surface melt dominates ice volume loss, and earlier appearance of open water within the ice zone initiates positive ice-albedo feedback, leading to a long lasting of the cyclone-induced impacts for approximately one month, and eventually a lower September ice volume. In contrast, if the cyclone occurs one month later, ice bottom melt entirely dominates ice volume loss, and the air-open water heat flux in the ice zone tends to offset ice volume loss.

A new species of Moniliformis, M. tupaia n. sp. is described using integrated morphological methods (light and scanning electron microscopy) and molecular techniques (sequencing and analysing the nuclear 18S, ITS, 28S regions and mitochondrial cox1 and cox2 genes), based on specimens collected from the intestine of the northern tree shrew Tupaia belangeri chinensis Anderson (Scandentia: Tupaiidae) in China. Phylogenetic analyses show that M. tupaia n. sp. is a sister to M. moniliformis in the genus Moniliformis, and also challenge the systematic status of Nephridiacanthus major. Moniliformis tupaia n. sp. represents the third Moniliformis species reported from China.

A new resolvent-based method is developed to predict the space–time properties of the flow field. To overcome the deterioration of the prediction accuracy with increasing distance between the measurements and predictions in the resolvent-based estimation (RBE), the newly proposed method utilizes the RBE to estimate the relative energy distribution near the wall rather than the absolute energy directly estimated from the measurements. Using this extra information from RBE, the new method modifies the energy distribution of the spatially uniform and uncorrelated forcing that drives the flow system by minimizing the norm of the cross-spectral density tensor of the error matrix in the near-wall region in comparison with the RBE-estimated one, and therefore it is named as the resolvent-informed white-noise-based estimation (RWE) method. For validation, three time-resolved direct numerical simulation (DNS) datasets with the friction Reynolds numbers $Re_\tau = 180$, 550 and 950 are generated, with various locations of measurements ranging from the near-wall region ($y^+ = 40$) to the upper bound of the logarithmic region ($y/h \approx 0.2$, where h is the half-channel height) for the predictions. Besides the RWE, three existing methods, i.e. the RBE, the $\lambda$-model and the white-noise-based estimation (WBE), are also included for the validation. The performance of the RBE and scale-dependent model ($\lambda$-model) in predicting the energy spectra shows a strong dependence on the measurement locations. The newly proposed RWE shows a low sensitivity on $Re_{\tau }$ and the measurement locations, which may range from the near-wall region to the upper bound of the logarithmic region, and has a high accuracy in predicting the energy spectra. The RWE also performs well in predicting the space–time properties in terms of the correlation magnitude and the convection velocity. We further utilize the new method to reconstruct the instantaneous large-scale structures with measurements from the logarithmic region. Both the RWE and RBE perform well in estimating the instantaneous large-scale structure, and the RWE has smaller errors in the estimations near the wall. The structural inclination angles around $15^\circ$ are predicted by the RWE and WBE, which generally recover the DNS results.

In view of the cooperative guidance problem with time delay, this paper proposes a two-stage time-delay prescribed-time cooperative guidance law in the three-dimensional (3D) space. In the first stage, by introducing a time scaling function and time-delay consensus, the proposed cooperative guidance law can overcome the negative influence of time delay to guaranteed the desired convergence performance. Derived from the Lyapunov convergence analysis, the time-delay stability of the first stage can be ensured and the convergence time can be described as the relationship between delayed time and mission-assigned convergence time. Then, taking the prescribed-time-related convergence time as the switching point, the second stage begins with suitable initial conditions and all interceptors are governed by proportional navigation guidance. Finally, comparative simulations are performed to demonstrate the effectiveness and superiority of the proposed time-delay guidance law.

Extraction of reference signal is an indispensable step in the signal processing of polarization diversity passive radar (PDPR) based on a digital television signal. A conventional reference signal extraction method requires an additional reference antenna, which has a certain demand for space. Single dual-polarization antenna passive radar (SDPPR) systems do not require a reference antenna, and the radar station layout is flexible, which is suitable for a large-scale radar network. It is a main research direction of PDPR in future. However, its reference signal extraction needs to rely on the signal reconstruction method. When the signal to interference and noise ratio of the direct-path signal is relatively low, the signal reconstruction method will fail. In this paper, we propose a reference signal extraction method based on sub-carrier processing method, blind adaptive oblique projection technology, and extensive cancelation algorithm to solve the above problem. Experimental results show that the method proposed in this paper is a reasonable alternative after the failure of reference signal reconstruction, and it is an effective supplement to the reference signal extraction technology.

Big data has been reported widely to facilitate epidemic prevention and control in health care during the coronavirus disease 2019 (COVID-19) pandemic. However, there is still a lack of practical experience in applying it to hospital prevention and control. This study is devoted to the practical experience of design and implementation as well as the preliminary results of an innovative big data-driven COVID-19 risk personnel screening management system in a hospital. Our screening system integrates data sources in four dimensions, which includes Health Quick Response (QR) code, abroad travelling history, transportation close contact personnel and key surveillance personnel. Its screening targets cover all patients, care partner and staff who come to the hospital. As of November 2021, nearly 690 000 people and 5.79 million person-time had used automated COVID-19 risk screening and monitoring. A total of 10 376 person-time (0.18%) with abnormal QR code were identified, 242 person-time with abroad travelling history were identified, 925 person-time were marked based on the data of key surveillance personnel, no transportation history personnel been reported and no COVID-19 nosocomial infection occurred in the hospital. Through the application of this system, the hospital's expenditure on manpower and material resources for epidemic prevention and control has also been significantly reduced. Collectively, this study has proved to be an effective and efficient model for the use of digital health technology in response to the COVID-19 pandemic. Based on the data from multiple sources, this system has an irreplaceable role in identifying close contacts or suspicious person, and can significantly reduce the social burden caused by COVID-19, especially the human resources and economic costs of hospital prevention and control. It may provide guidance for clinical epidemic prevention and control in hospitals, as well as for future public health emergencies.

This study performs global stability/receptivity analyses of hypersonic flows over a swept blunt body with infinite span. For the first time, we obtain the characteristics of the leading attachment-line mode to the variation of sweep angles from $20^{\circ }$ to $70^{\circ }$. The global eigenfunctions exhibit the characteristics of the attachment-line instability at the leading edge. At the same time, cross-flow (at small sweep angles) or second Mack mode (at larger sweep angles) dominates further downstream. We establish an adjoint-based bi-orthogonal eigenfunction system to address the receptivity problem of such flows to any external forces and boundary perturbations. The receptivity analyses indicate that the global modes are the most responsive to external forces and surface perturbations applied in the vicinity of the attachment line, regardless of the sweep angles. It is also proven that the present global extension of the bi-orthogonal eigenfunction system can be successfully applied to complex hypersonic flows.

We investigated high-resistivity cadmium zinc telluride (CdZnTe):In single crystals annealed in hydrogen to reveal the passivation effect of defects. An overall reduction in the concentration of defect levels induced by annealing was obviously observed by thermally stimulated current measurements. There is a large decrease by 56.51% in the concentration of secondly ionized Cd vacancies (T3) after hydrogenation. The concentration of firstly ionized Cd vacancies (T2) was a little bit lower (17.99%) in the hydrogenated CZT crystals. The formation of neutral InH complex and lower occupation of VCd by In dopant would result in a significant decrease (68.31%) in the trap density of ${\rm In}_{\rm Cd}^ +$ related shallow donor (T1) after hydrogenation. The bulk resistivity was calculated from I–V characteristic curves to be ~1.97 × 1010 Ωcm before annealing and ~1.78 × 1010 Ωcm after annealing. Hall measurements also reveal n-type conduction for the hydrogenated crystals. Electron mobility was fitted to be about 110 cm2/Vs before annealing and 488 cm2/Vs after annealing, demonstrating better carrier transport properties. Electron mobility-lifetime product could be fitted to be about 3.60 × 10−4 cm2/V before annealing and 5.45 × 10−4 cm2/V after annealing, demonstrating better detector performances.

TiAl alloys are potential structural high-temperature structural materials at a service temperature of ~900 °C, while poor ductility at room temperature and high creep rate at the elevated temperature limits the applications. To improve the room-temperature and high-temperature mechanical properties of Ti–44Al–5Nb–3Cr–1.5Zr, Mo and B were introduced into this system and Ti–44Al–5Nb–3Cr–1.5Zr–xMo–yB alloys were proposed. And then, we, respectively, studied the microstructures and mechanical properties of Ti–44Al–5Nb–3Cr–1.5Zr–xMo–0B and Ti–44Al–5Nb–3Cr–1.5Zr–1Mo–yB to elucidate the role for the addition of Mo and B. It is found that Mo can increase the fraction of B2 phase in the alloys and the microstructures of the alloys are greatly refined by the addition of B. The compression test results indicate that Mo has a positive influence on the high-temperature compressive properties of TiAl-based alloys, whereas B addition can improve their room-temperature compressive properties of Ti–44Al–5Nb–3Cr–1.5Zr–1Mo–yB alloys; the morphology of borides in each sample should be the structural origin for these phenomena.

Preoperative nutritional status plays an important role in predicting postoperative outcomes. Prognostic Nutritional Index (PNI) and Controlling Nutritional Status (CONUT) are good tools to assess patients’ nutritional status. They have been used in predicting outcomes in various malignancies, but few studies have focused on pancreatic adenocarcinoma (PDAC) patients. Totally, 306 PDAC patients were enrolled. The propensity score matching (PSM) method was introduced to eliminate the baseline inequivalence. Patients with different PNI (or CONUT) scores showed inequivalence baseline characteristics, and patients with compromised nutritional status were related with a more advanced tumour stage. After PSM, the baseline characteristics were well balanced. Both low PNI (≤45) and high CONUT (≥3) were independent risk factors for poor overall survival (P < 0·05), and the result remained the same after PSM. Survival analysis demonstrated both patients with low PNI and high CONUT score were associated with poorer survival, and the result remained the same after PSM. The results of AUC indicated that CONUT might have a higher sensitivity and specificity in predicting complications and survival. Preoperative low PNI (≤45) and high CONUT (≥3) scores might be reliable predictors of prognosis and surgical complications in PDAC patients. Compared with PNI, CONUT might be more effective.

We present details of on-wafer-level 16-term error model calibration kits used for the characterization of W-band circuits based on a grounded coplanar waveguide (GCPW). These circuits were fabricated on a thin gallium arsenide (GaAs) substrate, and via holes, were utilized to ensure single mode propagation (i.e., eliminating the parallel-plate mode or surface mode). To ensure the accuracy of the definition for the calibration kits, multi-line thru-reflect-line (MTRL) assistant standards were also fabricated on the same wafer and measured. The same wafer also contained passive and active devices, which were measured subject to both 16-term and conventional line-reflect-reflect-match calibrations. Measurement results show that 16-term calibration kits are capable of determining the cross-talk more accurately. Other typical calibration techniques were also implemented using the standards on the GCPW calibration kits, and were compared with the MTRL calibration using a passive device under test. This revealed that the proposed GCPW GaAs calibration substrate could be a feasible alternative to conventional CPW impedance standard substrates, for on-wafer measurements at W-band and above.

A 15-year-old teenager presented with a 2-month history of headache. Neurological examination was normal except for papilledema. Further lumbar puncture indicated intracranial hypertension (330 mm H2O). Brain magnetic resonance imaging (MRI) was normal but phase contrast-magnetic resonance venography (PC-MRV) (Figure 1(A)) suggested possible left transverse-sigmoid sinus thrombosis; subsequent contrast-enhanced 3D fat-saturated T1 volumetric isotropic turbo spin echo acquisition (VISTA) MRI (Figure 1(B)) confirmed the pathology. Hyper-coagulable panel results (including six steroid sex hormones, antithrombin III, protein C, protein S, lupus anticoagulant, and anticardiolipin antibodies) were all within normal range. In further examination, computed tomography (CT) venography images (Figure 1(C) and (D)) showed that the left jugular vein was compressed by the styloid process, consistent with Eagle syndrome.1 The patient who refused the recommended surgical treatment, however, chose anticoagulant therapy consisting of low-molecular weight heparin subcutaneous injection in addition to new oral anticoagulant. At 18-month follow-up, the patient reported no symptoms remained.

Direct determination of barrier height (ΦBH) value between Ir and single crystal (001) hydrogen-terminated diamond with lightly boron doped has been performed using x-ray photoelectron spectroscopy technique. 70 nm Ir islands were formed on hydrogen-terminated diamond surface using anodic aluminum oxide. The ΦBH value for Ir/hydrogen-terminated diamond was −0.43 ± 0.14 eV, indicating that Ir was a suitable metal for ohmic contact with hydrogen-terminated diamond. The band diagram of Ir/hydrogen-terminated diamond was obtained. The experimental ΦBH was compared with the theoretical ΦBH in this work.

Laves phase plays a positive role in improving the strength of high-entropy alloys (HEAs); Nb and Ti elements have potential to promote Laves phase formation in some HEAs. For improving the strength of the face-centered cubic (FCC) CoCrFeMnNi HEA, a series of (CoCrFeMnNi)100−xNbx (atomic ratio: x = 0, 4, 8, 12, 16) and (CoCrFeMnNi)100−xTix (atomic ratio: x = 0, 2, 4, 6, 8, 12) HEAs were prepared by melting. The effects of Nb and Ti on the microstructure evolution and compressive properties of the CoCrFeMnNi HEAs were investigated. For (CoCrFeMnNi)100−xNbx HEAs, the second-phase (Laves and σ phase) volume fraction increased from 0 to 42%. The yield strength also increased gradually from 202 to 1010 MPa. However, the fracture strain decreased from 60% (no fracture) to 12% with increasing Nb content. For (CoCrFeMnNi)100−xTix HEAs, the yield strength increased from 202 to 1322 MPa. The Laves phase volume fraction also increased from 0 to 27%. However, the fracture strain decreased from 60% (no fracture) to 7.5% with increasing Ti content. Addition of Nb and Ti has a good effect on improving the strength of FCC CoCrFeMnNi HEA.