Abnormalities in the zona pellucida (ZP) adversely affect oocyte maturation, embryo development and pregnancy outcomes. However, the assessment of severity is challenging. To evaluate the effects of different degrees of ZP abnormalities on embryo development and clinical outcomes, in total, 590 retrieval cycles were scored and divided into four categories (control, mild, moderate and severe) based on three parameters: perivitelline space, percentage of immature oocytes and percentage of oocytes with abnormal morphology. As the severity of abnormal ZP increased, both the number of retrieved oocytes and mature oocytes decreased. The fertilization rate did not differ significantly among groups. The rates of embryo cleavage and day-3 high-quality embryos in the mild group and the moderate group did not vary significantly between the two groups but were significantly higher than those in the severe group. The blastulation rates of the abnormal ZP groups were similar; however, they were lower than those of the control group. Moreover, the cycle cancellation rate of the severe abnormal ZP group was as high as 66.20%, which was significantly higher than that of the other three groups. Although the rates of cumulative clinical pregnancy and live births were lower than those in the control group, they were comparable among the abnormal ZP groups. There were no differences in the neonatal outcomes of the different groups. Together, ZP abnormalities show various degrees of severity, and in all patients regardless of the degree of ZP abnormalities who achieve available embryos, there will be an opportunity to eventually give birth.

Underground Nuclear Astrophysics in China (JUNA) will take the advantage of the ultra-low background in Jinping underground lab. High current accelerator with an ECR source and detectors were commissioned. JUNA plans to study directly a number of nuclear reactions important to hydrostatic stellar evolution at their relevant stellar energies. At the first period, JUNA aims at the direct measurements of 25Mg(p,γ)26 Al, 19F(p,α) 16 O, 13C(α, n) 16O and 12C(α,γ) 16O near the Gamow window. The current progress of JUNA will be given.

Findings from observational studies on the associations between vitamin E intake and stroke risk remain controversial, and the dose–response relationship between vitamin E intake and risk of stroke remains to be determined. We conducted a meta-analysis of prospective studies aiming to clarify the relationships between vitamin E intake and risk of stroke. Relevant studies were identified by searching online databases through to June 2018. We computed summary relative risks (RR) with corresponding 95 % CI. Among 3156 articles retrieved from online databases and relevant bibliographies, nine studies involving 3284 events and 220 371 participants were included in the final analyses. High dietary vitamin E intake was inversely associated with the risk of overall stroke (RR=0·83, 95 % CI 0·73, 0·94), and with the risk of stroke for individuals who were followed-up for <10 (RR=0·84, 95 % CI 0·72, 0·91). There was a non-linear association between dietary vitamin E intake and stroke risk (P=0·0249). Omission of any single study did not alter the summary result. In conclusion, this meta-analysis suggests that there is a significant inverse relationship between dietary vitamin E intake and stroke risk. This meta-analysis provides evidence that a higher dietary vitamin E intake is associated with a lower stroke risk.

A series of Ag2S/Ag2WO4 composite microrods with different Ag2S contents (10–50 wt%) were synthesized via a facile successive precipitation route. The texture and optical properties of the pure Ag2S, Ag2WO4, and Ag2S/Ag2WO4 composites were intensively characterized by some physicochemical characterizations like N2 physical adsorption, x-ray diffraction, scanning electron microscopy, Fourier transform infrared spectroscopy, Ultraviolet–visible spectroscopy, x‐ray photoelectron spectroscopy, photoluminescence spectroscopy, and photocurrent measurements. Under visible light irradiation, different organic dyes, e.g., methylene blue and methyl orange dye were applied to evaluate the photocatalytic performances by their photocatalytic degradation reactions. The Ag2S/Ag2WO4 composite microrods exhibited superior photocatalytic activity and stability. The high crystallinity of Ag2WO4 and improved texture properties of Ag2S/Ag2WO4 resulted in their enhanced photocatalytic property. More importantly, the Ag2S/Ag2WO4 heterojunctions with matching electronic band structures obviously enhanced the separation of photo‐generated electrons and holes, further promoting the photocatalytic reaction.

Novel 1–1.5 μm BiOCl0.5Br0.5 composite microspheres were prepared by coprecipitation method, then calcined at different temperatures. The BiOCl0.5Br0.5 samples before and after calcination were characterized by powder x-ray diffraction, thermogravimetric analysis, N2-physical adsorption, scanning electron microscopy, Fourier transformed infrared spectroscopy, and UV-Vis diffuse reflectance spectroscopy. The photocatalytic activity of the samples was evaluated by photocatalytic degradation of Rhodamine B under visible light irradiation. The results showed that the thermostability of BiOCl0.5Br0.5 composite microspheres is lower than BiOCl and higher than BiOBr. Heat treatment at low 500 °C could obviously improve the crystallinity of BiOCl0.5Br0.5 microspheres, resulting in a significant increase in activity. BiOCl0.5Br0.5 microspheres calcined at 450 °C displayed the highest activity and stability. At elevated temperature calcination (600–800 °C), phase transition occurred over BiOCl0.5Br0.5. Br element was gradually lost and new phase of Bi24O31Br10 appeared. High temperature calcination did not change the morphology of BiOCl0.5Br0.5, but the surface area and surface OH groups decreased, which resulted in a large decrease in activity.

This paper proposes an algorithm for the initial alignment method for rocket navigation systems. It uses the inertial freezing alignment to resolve the attitude matrix with respect to its fast and robust characteristics. Due to disturbances from the swaying base environment, such as people walking and wind effect, which would consequently result in a great lever arm effect, a Finite Impulse Response (FIR) filter is utilized to decrease the noise in the accelerometers' measurement. In addition, there are sensor errors in the system; the online estimation of gyroscopes' drift with a Kalman filter is adopted to achieve compensation. Numerical results from a simulated rocket initial alignment experiment are reported to demonstrate the effectiveness of the method.

Dragonfly eye beads are considered to be the earliest types of glass objects in China, and in the past have been considered as evidence of culture interaction or trade between West and East Asia. In this article, synchrotron radiation microcomputed tomography and μ-probe energy dispersive X-ray fluorescence were used to determine the chemical composition, microstructure, and manufacturing technology of four dragonfly eye beads, excavated from a Chu tomb at the Shenmingpu site, Henan Province, China, dated stylistically to the Middle and Late Warring State Period (475 bc–221 bc). First, a nondestructive method was used to differentiate the material types including faience (glazed quartz), frit, glazed pottery (clay ceramic), and glass. Three beads were identified as faience and one bead as glazed pottery. The glaze recipe includes quartz, saltpeter, plant ash, and various copper, and is classified as belonging to the K2O-CaO-SiO2 glass system, which indicates that these beads were not imported from the West. Based on computed tomography slices, the manufacturing technology of the faience eye beads appears to include the use of an inner core, molding technology, and the direct application glazing method. These manufacturing features are consistent with the techniques used in China during this same time period for bronze mold-casting, proto-porcelain, and glass.

Elimination of degenerate epitaxy in the growth of icosahedral boron arsenide (B12As2, abbreviated as IBA) was achieved on m-plane 15R-SiC substrates and 4H-SiC substrates intentionally misoriented by 7 degrees from (0001) towards [1-100]. Synchrotron white beam x-ray topography (SWBXT) revealed that only single orientation IBA was present in the epitaxial layers demonstrating the absence of twin variants which dominantly constitute the effects of degenerate epitaxy. Additionally, low asterism in the IBA diffraction spots compared to those grown on other SiC substrates indicates a superior film quality. Cross-sectional high resolution transmission electron microscopy (HRTEM) and scanning transmission electron microscopy (STEM) both confirmed the absence of twins in the IBA films and their high quality. The ease of nucleation on the ordered step structures present on these unique substrates overrides symmetry considerations that drive degenerate epitaxy and dominates the nucleation process of the IBA.

In this work, 4H-SiC substrates intentionally misoriented from the (0001) plane toward [1-100] direction are shown to eliminate rotational twinning in icosahedral boron arsenide (B12As2, abbreviated here as IBA) epitaxial films. Previous studies of IBA on other substrates, including (100), (110), (111) Si and (0001) 6H-SiC, produced polycrystalline and twinned epilayers. Comparisons of IBA on on-axis and off-axis c-plane 4H-SiC by synchrotron white beam x-ray topography (SWBXT), and high resolution transmission electron microscopy (HRTEM) confirm the single crystalline and much higher quality of the films on the latter substrates. Furthermore, no intermediate layer between the epilayer and substrate was observed for IBA on off-axis 4H-SiC. Steps formed on the off-axis 4H-SiC substrate surface before deposition cause the film to adopt a single orientation, a process that is not seen with substrates with either no misorientation, or those tilted toward the [11-20] direction. This work demonstrates that c-plane 4H-SiC with 7° offcut toward (1-100) is potentially a good substrate choice for the growth of high-quality, untwinned B12As2 epilayers for future device applications.

The defect structure in B12As2 epitaxial layers grown at two different temperatures on (0001) 6H-SiC by chemical vapor deposition (CVD) was studied using synchrotron white beam x-ray topography (SWBXT) and high resolution transmission electron microscopy (HRTEM). The observed differences in microstructures were correlated with the differences in nucleation at the two growth temperatures. The effect of the difference in microstructure on macroscopic properties of the B12As2 was illustrated using the example of thermal conductivity which was measured using the 3-ω technique. The relationship between the measured thermal conductivity and observed microstructures is discussed.

A systematic study is presented of the heteroepitaxial growth of B12As2 on m-plane 15R-SiC. In contrast to previous studies of B12As2 on other substrates, including (100) Si, (110) Si, (111) Si and (0001) 6H-SiC, single crystalline and untwinned B12As2 was achieved on m-plane 15R-SiC. Observations of IBA on m-plane (1100)15R-SiC by synchrotron white beam x-ray topography (SWBXT) and high resolution transmission electron microscopy (HRTEM) confirm the good quality of the films on the 15R-SiC substrates. The growth mechanism of IBA on m-plane 15R-SiC is discussed. This work demonstrates that m-plane 15R-SiC is potentially a good substrate choice to grow high quality B12As2 epilayers.

B12As2 epitaxial layers grown on (0001) 6H-SiC and (1120) 6H-SiC substrates have been studied using scanning electron microscopy (SEM), high resolution transmission electron microscopy (HRTEM) and synchrotron white beam x-ray topography (SWBXT) and investigated with the aid of crystal visualization software. SWBXT showed that B12As2 adopted [111] growth orientation, parallel to [0001]SiC, on c-plane 6H-SiC and adopted [101] growth orientation, parallel to [1120]SiC, on a-plane 6H-SiC. However, SWBXT also revealed the twins in both sets of the B12As2 films, consistent with the SEM observation of the surface morphology. Cross-sectional HRTEM also confirmed the presence of twins in both cases and also revealed the existence of an intermediate layer between the c-plane 6H-SiC and the B12As2 film. By correlating the HRTEM observation and crystal visualization, the atomic configurations across the twin boundaries in both samples as well as those in the intermediate layer in the c-plane sample were proposed.