The hydrodynamic behaviours of finite-size microorganisms in turbulent channel flows are investigated using a direct-forcing fictitious domain method. The classical ‘squirmer’ model, characterized by self-propulsion through tangential surface waves at its boundaries, is employed to mimic the swimming microorganisms. We adopt various simulation parameters, including a friction Reynolds number Reτ = 180, two squirmer volume fractions 𝜑0 = 12.7 % and 2.54 % and a blocking ratio (squirmer radius/half-channel width) κ = 0.125. Results show that pushers (propelled from the rear) induce a more pronounced decrease in the velocity profile than neutral squirmers and pullers (propelled from the front). This hindrance and the induced particle inner stress τpI positively correlate with the quantity of squirmers accumulated in the near-wall region. Notably, the increase in τpI primarily occurs at the expense of diminishing the fluid Reynolds stress τfR. Compared with passive spheres, a low volume fraction (𝜑0 = 2.54 %) of pullers results in a slightly enhanced velocity profile across the channel. In the near-wall region, the swimming direction of the squirmers shows no significant tendency with respect to the flow direction. In the bulk-flow region, pushers and neutral squirmers tend to align their axes more along the flow direction, whereas pullers exhibit a slight preference for alignment with the normal direction.

The vitamin K (VK) levels vary greatly among different populations and in different regions. Currently, there is a lack of reference intervals for VK levels in healthy individuals, The aim of this study is to establish and validate the reference intervals of serum vitamin K1 (VK1) and vitamin K2 (VK2, specifically including menaquinone-4 (MK4) and menaquinone-7 (MK7)) levels in some healthy populations in Beijing. Serum VK1, MK4, and MK7 were firstly measured by high-performance liquid chromatography and mass spectrometry in 434 subjects. The reference intervals for three indicators were established by calculating the data of 2.5 and 97.5 percentiles. Finally, preliminary clinical validation was conducted on 60 apparent healthy individuals undergoing physical examination. In the young, middle-aged, and elderly groups, the reference intervals of VK1 were 0.180 ng/mL ∼ 1.494 ng/mL, 0.247 ng/mL ∼ 1.446 ng/mL, and 0.167 ng/mL ∼ 1.445 ng/mL, respectively. The reference intervals of MK4 were 0.009 ng/mL ∼ 0.115 ng/mL, 0.002 ng/mL ∼ 0.103 ng/mL, and 0.003 ng/mL ∼ 0.106 ng/mL, respectively. The reference intervals of MK7 were 0.169 ng/mL ∼ 0.881 ng/mL, 0.238 ng/mL ∼ 0.936 ng/mL, and 0.213 ng/mL ∼ 1.012 ng/mL, respectively. The reference intervals had been validated by the samples of healthy individuals for physical examination. In conclusion, the reference intervals of VK established in this study with different age groups have certain clinical applicability, providing data support for further multicentre studies.

Scabies is a neglected tropical disease caused by the ectoparasitic mite, Sarcoptes scabiei var. hominis (S. scabiei). Common scabies, the most prevalent clinical subtype of scabies, is characterized by pruritus, multiple skin lesions and low mite burden. In contrast, crusted scabies, an extremely contagious variant, is characterized by hyperkeratosis and high mite burden, with or without pruritus. Scabies can be diagnosed based on clinical manifestations, with confirmation obtained through microscopic identification of diagnostic features of S. scabiei. However, owing to the diversity and non-specific nature of its clinical manifestations and insufficient knowledge regarding early-stage clinical manifestations, the diagnosis of crusted scabies continues to be delayed. Herein, we present three cases of scabies with varying degrees of crusting and mite burden. Three patients with physical and microscopic results suggesting scabies were selected for this study. Case 1 had mild crusting and low mite burden, case 2 had severe crusting and high mite burden and case 3 had mild crusting and high mite burden. In this case report, ‘the initial stage of crusted scabies’ refers to the progression from common to crusted scabies. The discussion regarding the diagnostic characteristics of the initial stage of crusted scabies is expected to aid the early diagnosis of crusted scabies.

This paper introduces a novel fiber-based picosecond burst-mode laser system capable of operating at high power and high repetition rates. A pulse-circulating fiber ring was developed as a burst generator, achieving an intra-burst repetition rate of 469 MHz without the need for a high-repetition-rate seed source. This design also allows for flexible adjustment of the number of sub-pulses, burst repetition rate and burst shape. In addition, a master oscillator power amplifier was employed to analyze the amplification characteristics of bursts. The system demonstrated a maximum average power of 606 W, with a measured sub-pulse duration of 62 ps and the highest sub-pulse peak power of 980 kW. To the best of our knowledge, this marks the highest average power obtained in burst-mode ultrafast lasers. Such a laser system holds potential for applications in precision manufacturing, high-speed imaging, high-precision ranging and other diverse domains.

In this paper, we propose a joint modeling approach to analyze dependency in parallel response data. We define two types of dependency: higher-level dependency and within-item conditional dependency. While higher-level dependency can be estimated with common latent variable modeling approaches, within-item conditional dependency is a unique kind of information that is often not captured with extant methods, despite its potential to shed new insights into the relationship between the two types of response data. We differentiate three ways of modeling within-item conditional dependency by conditioning on raw values, expected values, or residual values of the response data, which have different implications in terms of response processes. The proposed approach is illustrated with the example of analyzing parallel data on response accuracy and brain activations from a Theory of Mind assessment. The consequence of ignoring within-item conditional dependency is investigated with empirical and simulation studies in comparison to conventional dependency analysis that focuses exclusively on relationships between latent variables.

Theory of mind (ToM) is an essential social-cognitive ability to understand one’s own and other people’s mental states. Neural data as well as behavior data have been utilized in ToM research, but the two types of data have rarely been analyzed together, creating a large gap in the literature. In this paper, we propose and apply a novel joint modeling approach to analyze brain activations with two types of behavioral data, response times and response accuracy, obtained from a multi-item ToM assessment, with the intention to shed new light on the nature of the underlying process of ToM reasoning. Our trivariate data analysis suggested that different levels or kinds of processes might be involved during the ToM assessment, which seem to differ in terms of cognitive efficiency and sensitivity to ToM items and the correctness of item responses. Additional details on the trivariate data analysis results are provided with discussions on their implications for ToM research.

The eddy-viscosity model, as initially used to model the mean Reynolds stress, has been widely used in the linear analysis of turbulence recently by direct extension. In this study, the mechanism of the eddy viscosity in improving the prediction of fluctuation structures with linear analysis is clarified by investigating the statistical properties of forcing, eddy-viscosity term and their correlations. From the direct numerical simulation (DNS) results of turbulent channel flows with $Re_{\tau }=186$–$2003$, the spatial correlation of forcing is partially cancelled due to its interaction with eddy-viscosity terms. The stochastic forcing after excluding the eddy-viscosity term is nearly uncorrelated spatially, which better matches the condition where the resolvent modes are consistent with the spectral proper orthogonal decomposition (SPOD) modes from DNS. With the above findings, an optimisation framework is developed by minimising the spatial correlations of the stochastic forcing. The optimised eddy-viscosity profiles nearly overlap with the mean-quantity-based model in the near-wall region, but have different maximum values. Compared with the mean-quantity-based model, the optimised results enhance the consistency between the resolvent and DNS results significantly. Based on the optimised results, a new modelling framework is further abstracted, leaving only one to-be-modelled parameter of the maximum value of the eddy-viscosity profile. This parameter follows distinctive rules with spanwise flow scales, based on which a simplified predictive model is constructed. The resolvent modes predicted by the new model exhibit high consistency with SPOD modes, which are essentially comparable to the optimised results for wide ranges of streamwise and spanwise scales.

A high-energy pulsed vacuum ultraviolet (VUV) solid-state laser at 177 nm with high peak power by the sixth harmonic of a neodymium-doped yttrium aluminum garnet (Nd:YAG) amplifier in a KBe2BO3F2 prism-coupled device was demonstrated. The ultraviolet (UV) pump laser is a 352 ps pulsed, spatial top-hat super-Gaussian beam at 355 nm. A high energy of a 7.12 mJ VUV laser at 177 nm is obtained with a pulse width of 255 ps, indicating a peak power of 28 MW, and the conversion efficiency is 9.42% from 355 to 177 nm. The measured results fitted well with the theoretical prediction. It is the highest pulse energy and highest peak power ever reported in the VUV range for any solid-state lasers. The high-energy, high-peak-power, and high-spatial-uniformity VUV laser is of great interest for ultra-fine machining and particle-size measurements using UV in-line Fraunhofer holography diagnostics.

To meet the development needs of aeroengines for high thrust-to-weight ratios and fuel-air ratios, a high temperature rise triple-swirler main combustor was designed with a total fuel-air ratio of 0.037, utilising advanced technologies including staged combustion, multi-point injection and multi-inclined hole cooling. Fluent software was used to conduct numerical simulations under both takeoff and idle conditions, thereby obtaining the distribution characteristics of the velocity and temperature fields within the combustor, as well as the generation of pollutants. The simulation results indicate that under takeoff conditions, the high temperature rise triple-swirler combustor achieves a total pressure loss coefficient of less than 6% and a combustion efficiency exceeding 99%. Under takeoff conditions, the OTDF and RTDF values are 0.144 and 0.0738, respectively. The mole fraction of NOx emissions is 3,700ppm, while the mole fraction of soot emissions is 2.55×10−5ppm. Under idle conditions, the triple-swirler combustor maintains a total pressure loss coefficient of less than 6% and a combustion efficiency greater than 99.9%. The OTDF and RTDF values are 0.131 and 0.0624, respectively. The mole fractions of CO and UHC emissions are both 0×10−32ppm at the calculation limit of Fluent software.

The motion of a sphere freely rising or falling in a 5d (d is the diameter of the sphere) square tube was numerically studied for the sphere-to-fluid density ratio ranging from 0.1 to 2.3 (0.1 ≤ ρs/ρ ≤ 2.3, ρs is the density of spheres and ρ the fluid density) and Galileo number from 140 to 230 (140 ≤ Ga ≤ 230). We report that Hopf bifurcation occurs at Gacrit ≈ 157, where both the heavy and light spheres lose stability. The helical motion is widely seen for all spheres at Ga > 160 resulting from a double-threaded vortex interacting with the tube walls, which becomes irregular at Ga ≥ 190 where heavy spheres act differently from their counterparts; that is, heavy spheres change their helical directions alternately while light spheres exhibit helical trajectories with jaggedness in connection with the shedding of the double-threaded vortices. This is because of the difference in inertia between the heavy and light spheres. We also checked the oscillation periods for the helical motion of the spheres. They show opposite variations with ρs/ρ for the two types of spheres. Light spheres (ρs/ρ ≤ 0.7) reach a zigzagging regime at Ga ≥ 200 where a vortex loop (hairpin-like vortical structure) is formed which may develop into a vortex ring downstream at small ρs/ρ. This might be the first time a transition from the helical motion to the zigzagging motion for heavy spheres (ρs/ρ ≥ 1.8) has been reported. Finally, we examined the dependence of both the terminal Reynolds number and the drag coefficient of the spheres on the Galileo number.

Background: Mild behavioral impairment (MBI) in older people refers to a group of syndromes that are characterized primarily by clusters of neuropsychiatric symptoms without severe cognitive impairment, which is a high-risk population for dementia. Patients often experience a variety of symptoms and exhibit high heterogeneity in symptomatology across different individuals. Classifying the psychotic symptom characteristics of MBI patients aids in the implementation of precise interventions for the next steps.

Objectives: To explore the symptom characteristics of older people with MBI and to classify them based on their symptoms.

Methods: Using a multi-stage sampling Methods, the MBI-Checklist was employed to investigate symptom characteristics in 255 older people with MBI from 32 nursing homes in Fujian Province. Latent Class Analysis (LCA) was then employed to categorize these individuals based on their symptom profiles.

Results: The neuropsychiatric symptoms clusters in older people with MBI often present as a combination of lack of motivation and emotional dysregulation, lack of motivation and impulse control disorders, or emotional dysregulation and impulse control disorders; presentation of a single symptom cluster is relatively less common, accounting for 45.49%. Older people with MBI can be divided into 2 latent classes (P < 0.05) based on symptom characteristics. According to the conditional probability of each class, they were named the “high- level group’’ [211 (82.69%)] and the “low-level group’’[44 (17.31%)].

Discussion: As individuals with MBI are at high risk for developing dementia, early intervention can effectively delay or reduce the occurrence of dementia. Future interventions should be personalized based on the specific symptom characteristics of this population.

Objectives: The aim of this study was to identify core and bridge symptoms between emergent neuropsychiatric symptoms and sleep disturbance in dementia-risk older adults with depressive symptoms in nursing homes using network analysis, and to further compare the structural differences in symptom networks between subthreshold depressive and depressive groups.

Methods: A total of 853 older adults in nursing homes participated in this study. We used the Mild Behavioral Impairment (MBI) and the Pittsburgh Sleep Quality Index (PSQI) to assess the severity of emergent neuropsychiatric symptoms and sleep disturbances, respectively, and the analyses also generated a network model of the MBI-PSQI in the sample and examined subthreshold depressive and depressive groups’ potential differences between network structure and connectivity.

Results: The core symptom in the global MBI-PSQI network of older adults with depressive symptoms in nursing homes was MBI8’’ (Lack of pleasure experience: 8.340), and the bridge symptom was PSQI7’’ (Daytime Dysfunction: 3.894). The edges connecting the nodes MBI2’’ (Lost curiosity in usual interests) and MBI3’’ (Decreased social initiative) in the global MBI-PSQI network has the strongest weight (0.798). Compared to the global network, for participants in the depression group, MBI8’’ (7.647) remains the most core symptom, and PSQI7’’ (4.028) serves as a critical bridge symptom between emergent neuropsychiatric symptoms and sleep disturbances. However, in the subthreshold depression group, the MBI-PSQI network structure exhibits distinct characteristics, with MBI2’’ (5.563) being revealed as the most significant symptom, closely followed by MBI8’’ (5.453). Furthermore, the bridge symptom connecting emergent neuropsychiatric symptoms to sleep disturbances shifts to PSQI4’’ (Sleep Efficiency: 1.386). Intriguingly, the strongest edge in both the global network and the subgroup network is MBI2-MBI3.

Conclusions: There is an association between emergent neuropsychiatric symptoms and sleep disturbance in dementia-risk older adults with depressive symptoms in nursing homes. In addition, heterogeneity in the network structure of subthreshold depression and depression, with shifts in core and bridge symptoms, providing directions for designing novel and targeted interventions.