A low-profile wideband circularly polarized (CP) metasurface antenna is demonstrated for C-band applications. The metasurface consists of 4 × 4 square patches with Z-shaped slots. Characteristic mode analysis is used to investigate the modal behavior of the metasurface, and a pair of degenerate modes is chosen as the operating modes. The CP radiation is realized by exciting a pair of degenerate modes of the metasurface through a slot antenna, which is used as a feed structure with a 90° phase difference. The CP bandwidth is further widened by combining the resonance modes of the metasurface and slot antenna. The measured results show that the −10 dB impedance bandwidth of the antenna is 3.47–4.76 GHz, and the 3 dB axial ratio bandwidth is 3.5–4.9 GHz with a peak gain of 6.9 dBic. Moreover, the antenna exhibits well left-hand CP radiation performances with a low profile of 0.046λ0.

This study aims to understand the epidemiological characteristics of SARS-CoV-2 infection in the paediatric population during the outbreak of the Omicron variant in Shanghai. We retrospectively analysed the population-based epidemiological characteristics and clinical outcome of SARS-CoV-2 Omicron variant infection in children in Minhang District, Shanghai, based on the citywide surveillance system during the outbreak period in 2022 (March to May). During this time, a total of 63,969 cases of SARS-CoV-2 infection were notified in Minhang District, out of which 4,652 (7.3%) were children and adolescents <18 years. The incidence rate of SARS-CoV-2 infections in children was 153 per 10,000. Of all paediatric cases, 50% reported to be clinically symptomatic within 1–3 days after PCR confirmation by parents or themselves, with 36.3% and 18.9% of paediatric cases reporting fever and cough. Also, 58.4% of paediatric cases had received at least one dose of the COVID-19 vaccine and 52.1% had received two doses of the COVID-19 vaccination. Our findings are informative for the implementation of appropriate measures to protect children from the threat of SARS-CoV-2 infection.

A two-element low-profile closely coupled dual-band MIMO antenna is demonstrated for WiMAX applications. Based on the principle of metasurface (MTS) decoupling, a double-layer MTS consisting of pairs of elliptic patches with two different sizes is proposed. The MTS is loaded above a coupled dual-band MIMO antenna, and the mutual coupling in the lower and upper band is reduced by the larger and smaller elliptic patches, respectively. The edge-to-edge distance of antenna elements is only 0.01λ0 (λ0 is the free-space wavelength at 2.6 GHz). The measured results show that the working bandwidths of the MIMO antenna are 2.5–2.69 and 3.4–3.69 GHz. The −10 dB impedance bandwidths in two bands are 8.83% (2.49–2.72 GHz) and 8.50% (3.38–3.68 GHz), and the isolation between antenna elements is enhanced by 13.5 and 18.4 dB in two bands, respectively. Moreover, broadside radiation performances in two bands are obtained.

To verify whether a graph is suitable for describing driver behaviour performance under the effects of navigation information, this study applies two types of prompt messages: simple and detailed. The simple messages contain only direction instructions, while the detailed messages contain distance, direction, road and lane instructions. A driving simulation experiment was designed to collect the empirical data. Two vehicle operating indicators (velocity and lateral offset), and two driver manoeuvre indicators (accelerator power and steering wheel angle) were selected, and T-test was used to compare the differences of behavioural performance. Driving behaviour graphs were constructed for the two message conditions; their characteristics and similarities were further analysed. Finally, the results of T-test of behavioural performance and similarity results of the driving behaviour graphs were compared. Results indicated that the two different types of prompt messages were associated with significant differences in driving behaviours, which implies that it is feasible to describe the characteristics of driving behaviours guided by navigation information using such graphs. This study provides a new method for systematically exploring the mechanisms affecting drivers’ response to navigation information, and presents a new perspective for the optimisation of navigation information.

Streptococcus agalactiae (S. agalactiae) infection is a significant cause of mastitis, resulting in loss of cellular homeostasis and tissue damage. Autophagy plays an essential function in cell survival, defense, and the preservation of cellular homeostasis, and is often part of the response to pathogenic challenge. However, the effect of autophagy induced by S. agalactiae in bovine mammary epithelial cells (bMECs) is mainly unknown. So in this study, an intracellular S. agalactiae infection model was established. Through evaluating the autophagy-related indicators, we observed that after S. agalactiae infection, a significant quantity of LC3-I was converted to LC3-II, p62 was degraded, and levels of Beclin1 and Bcl2 increased significantly in bMECs, indicating that S. agalactiae induced autophagy. The increase in levels of LAMP2 and LysoTracker Deep Red fluorescent spots indicated that lysosomes had participated in the degradation of autophagic contents. After autophagy was activated by rapamycin (Rapa), the amount of p-Akt and p-mTOR decreased significantly, whilst the amount of intracellular S. agalactiae increased significantly. Whereas the autophagy was inhibited by 3-methyladenine (3MA), the number of intracellular pathogens decreased. In conclusion, the results demonstrated that S. agalactiae could induce autophagy through PI3K/Akt/mTOR pathway and utilize autophagy to survive in bMECs.

We report on a theoretical and experimental study on the anisotropic diffusion of isolated prolate spheroidal particles in the presence of an aligning potential field. By analysing the microscopic stochastic equations of motion, we obtained the coarse-grained Fokker–Planck equations that govern the evolution of the probability distributions of particle orientation in various configurational spaces. In particular, we found explicit formulae for the diffusion coefficients parallel ($D_x$) and perpendicular ($D_y$) to the field direction in the long-time limit. The predicted results were experimentally validated by measuring the Brownian motions of fluid-suspended carbon nanotubes in an electric field. Good agreement was observed between theoretical and experimental results, both of which showed increasing $D_x$ and decreasing $D_y$ with increasing field strength up to a critical field strength beyond which both curves start to flatten. Our theory and experimental results provide a framework for understanding the coupling between rotation and translation in a diffusion process, and for controlling the diffusion of particles with aligning potential fields.

This study deploys RTK-GNSS in 2012, TLS in 2015 and UAV in 2018 to monitor the changes of Urumqi Glacier No. 1 (UG1), eastern Tien Shan, and analyzes the feasibility of three technologies in monitoring the mountain glaciers. DEM differencing shows that UG1 has experienced a pronounced thinning and mass loss for the period of 2012–18. The glacier surface elevation change of −0.83 ± 0.57 m w.e. a−1 has been recorded for 2012–15, whereas the changes of glacier tongue surface elevation in 2015–18 and 2012–18 were −2.03 ± 0.95 and −1.34 ± 0.88 m w.e. a−1, respectively. The glacier area shrunk by 0.07 ± 0.07 × 10−3 km2 and the terminus retreat rate was 6.28 ± 0.83 m a−1 during 2012–18. The good agreement between the glaciological and geodetic specific mass-balances is promising, showing the combination of the three technologies is suitable to monitor glacier mass change. We recommend application of the three technologies to assess each other in different locations of the glacier, e.g. RTK-GNSS base stations, ground control points, glacier tongue and terminus, in order to avoid the inherent limitations of each technology and to provide reliable data for the future studies of mountain glacier changes in western China.

We consider the fractional elliptic problem: where B1 is the unit ball in ℝN, N ⩾ 3, s ∈ (0, 1) and p > (N + 2s)/(N − 2s). We prove that this problem has infinitely many solutions with slow decay O(|x|−2s/(p−1)) at infinity. In addition, for each s ∈ (0, 1) there exists Ps > (N + 2s)/(N − 2s), for any (N + 2s)/(N − 2s) < p < Ps, the above problem has a solution with fast decay O(|x|2s−N). This result is the extension of the work by Dávila, del Pino, Musso and Wei (2008, Calc. Var. Partial Differ. Equ. 32, no. 4, 453–480) to the fractional case.

The aim of this study was to investigate the association between daily Se intake and postpartum weight retention (PPWR) among Chinese lactating women, and the impact of their Se nutritional status on infants’ physical development. Se contents in breast milk and plasma collected from 264 lactating Chinese women at the 42nd day postpartum were analysed with inductively coupled plasma MS. Daily Se intake was calculated based on plasma Se concentration. The dietary data of 24-h records on three consecutive days were collected. Infant growth status was evaluated with WHO standards by Z-scores. Linear regression analyses and multinomial logistic regression were conducted to examine the impact of Se disequilibrium (including other factors) on PPWR and growth of infants, respectively. The results indicated that: (1) the daily Se intake of the subjects was negatively associated with their PPWR (B = −0·002, 95 % CI − 0·003, 0·000, P = 0·039); (2) both insufficient Se daily intake (B = −0·001, OR 0·999, 95 % CI 0·998, 1·000, P = 0·014) and low level of Se in milk (B = −0·025, OR 0·975, 95 % CI 0·951, 0·999, P = 0·021) had potential associations with their infants’ wasting, and low level of Se in milk (B = −0·159, OR 0·853, 95 % CI 0·743, 0·980, P = 0·024) had a significant association with their infants’ overweight. In conclusion, the insufficient Se nutritional status of lactating Chinese women was first found as one possible influencing factor of their PPWR as well as low physical development of their offspring.

The epidemic of coronavirus disease 2019 (COVID-19) began in China and had spread rapidly to many other countries. This study aimed to identify risk factors associated with delayed negative conversion of SARS-CoV-2 in COVID-19 patients. In this retrospective single-centre study, we included 169 consecutive patients with confirmed COVID-19 in Zhongnan Hospital of Wuhan University from 15th January to 2nd March. The cases were divided into two groups according to the median time of SARS-CoV-2 negative conversion. The differences between groups were compared. In total, 169 patients had a median virus negative conversion time of 18 days (interquartile range: 11–25) from symptom onset. Compared with the patients with short-term negative conversion, those with long-term conversion had an older age, higher incidence of comorbidities, chief complaints of cough and chest distress/breath shortness and severer illness on admission, higher level of leucocytes, neutrophils, aspartate aminotransferase, creatine kinase and erythrocyte sedimentation rate (ESR), lower level of CD3+CD4+ lymphocytes and albumin and more likely to receive mechanical ventilation. In multivariate analysis, cough, leucocytes, neutrophils and ESR were positively correlated with delayed virus negative conversion, and CD3+CD4+ lymphocytes were negatively correlated. The integrated indicator of leucocytes, neutrophils and CD3+CD4+ lymphocytes showed a good performance in predicting the negative conversion within 2 weeks (area under ROC curve (AUC) = 0.815), 3 weeks (AUC = 0.804), 4 weeks (AUC = 0.812) and 5 weeks (AUC = 0.786). In conclusion, longer quarantine periods might be more justified for COVID-19 patients with cough, higher levels of leucocytes, neutrophils and ESR and lower levels of CD3+CD4+ lymphocytes.

During the detection of industrial hazardous gases, like formaldehyde (HCHO), the selectivity is still a challenging issue. Herein, an alternative HCHO chemosensor that based on the tin oxide nanoparticles is proposed, which was obtained through a facile hydrothermal method. Gas sensing performances showed that the optimal working temperature located at only 180 °C, the response value of 79 via 50 ppm HCHO was much higher than that of 35 at 230 °C. However, the compromised test temperature was selected as 230 °C, taking into account the faster response/recovery speeds than 180 °C, named 20/23versus 53/60 s, respectively. The response (35) of the SnO2 nanoparticles-based sensor to 50 ppm of HCHO is about 400% higher than that of bulk SnO2 sensor (9), especially when the gas concentration is 1 ppm, SnO2 nanoparticles also has a higher sensitivity which may possibly result from more exposed active sites and small size effect for nanoparticles than for bulk ones. The gas sensor based on SnO2 nanoparticles can be utilized as a promising candidate for practical low-temperature detectors of HCHO due to its higher gas response, excellent response–recovery properties, and perfect selectivity.

Radiocarbon (14C) generated by the thermonuclear tests in the late 1950s to early 1960s has been used as a tracer to study atmospheric and oceanic circulations, carbon exchange between different reservoirs, and fossil fuel emissions. Here we report the first measurements of 14C in atmospheric CO2 of maritime air collected over the South China Sea (SCS) during July 2014. We also present 14C of the dissolved inorganic carbon (DIC) in the sea surface water in the same region. Most of the Δ14C values of the atmospheric CO2 vary in the range of 15.6±1.6‰– 22.0±1.6‰, indicating that the central SCS maritime air is well-mixed and consistent with the clean background air in the Northern Hemisphere. The 14C values of the DIC (DI14C) in the surface seawater vary between 28.3±2.5‰ and 40.6±2.7‰, mainly due to the lateral mixing between the SCS and western Pacific. The average surface seawater DI14C is 15.4 ± 5.1‰ higher than that of the maritime air 14CO2. The reversal of the sea–air Δ14C gradient occurred at ∼2000, marking the start of the upper ocean transferring bomb 14C back to the atmosphere in the SCS.

The novel visible-light-responsive direct solid-state Z-scheme g-C3N4/BiOI heterojunction has been synthesized successfully by means of a solid phase calcination method and used for the degradation of microcystin-LR (MC-LR). The layered g-C3N4 disperses on the surface of BiOI microspheres. The samples are characterized by FESEM, HRTEM, XRD, FT-IR, UV-vis spectroscopy, XPS, BET, PL, and Mott–Sckottky. The photocatalytic activity and photodegradation mechanism of the as-prepared g-C3N4/BiOI microsphere photocatalysts are conducted under visible light irradiation using MC-LR as the target pollutant. The g-C3N4/BiOI material exhibits superior photocatalytic performance when compared with pure BiOI, the possible reason is the efficient separation of photogenerated carriers at the interface between g-C3N4 and BiOI. The heterostructure is responsible for the improved separation efficiency of photogenerated electron–hole pairs and thus the higher photocatalytic activity. The possible photocatalytic mechanism is proposed based on relative band positions of these two semiconductors.

High-pressure die-casting (HPDC) AM50 tensile specimens were used to investigate characteristics of gas pores and its effect on mechanical properties of HPDC AM50 magnesium alloy. Combining microstructure morphology gained from optical microscopy, scanning electron microscopy (SEM), and three-dimensional (3D) reconstruction with the experimental data from uniaxial tensile testing, we pursued the relationship between gas pores and the mechanical properties of HPDC AM50 Mg alloy. Results indicate that comparing with 3D reconstruction models, 2D images like optical metallography images and SEM images have one-sidedness. Furthermore, the size and maximum areal fraction of gas pores have negative effects on the mechanical properties of HPDC AM50 Mg alloy. With increase of the maximum size of gas pores in the specimen, the ultimate tensile strength (UTS) and elongation decrease. In addition, with the maximum areal fraction becoming larger, both the UTS and elongation decrease linearly.