4 results
Optimizing chloroacetamide application timing in dicamba-resistant cotton production systems for control of glyphosate-resistant Palmer amaranth (Amaranthus palmeri)
- John T. Buol, Lucas X. Franca, Darrin M. Dodds, J. Anthony Mills, Janice L. DuBien, Ashli E. Brown-Johnson, David R. Shaw, Daniel B. Reynolds
-
- Journal:
- Weed Technology / Volume 35 / Issue 6 / December 2021
- Published online by Cambridge University Press:
- 09 September 2021, pp. 1007-1013
-
- Article
- Export citation
-
A chloroacetamide herbicide by application timing factorial experiment was conducted in 2017 and 2018 in Mississippi to investigate chloroacetamide use in a dicamba-based Palmer amaranth management program in cotton production. Herbicides used were S-metolachlor or acetochlor, and application timings were preemergence, preemergence followed by (fb) early postemergence, preemergence fb late postemergence, early postemergence alone, late postemergence alone, and early postemergence fb late postemergence. Dicamba was included in all preemergence applications, and dicamba plus glyphosate was included with all postemergence applications. Differences in cotton and weed response due to chloroacetamide type were minimal, and cotton injury at 14 d after late postemergence application was less than 10% for all application timings. Late-season weed control was reduced up to 30% and 53% if chloroacetamide application occurred preemergence or late postemergence only, respectively. Late-season weed densities were minimized if multiple applications were used instead of a single application. Cotton height was reduced by up to 23% if a single application was made late postemergence relative to other application timings. Chloroacetamide application at any timing except preemergence alone minimized late-season weed biomass. Yield was maximized by any treatment involving multiple applications or early postemergence alone, whereas applications preemergence or late postemergence alone resulted in up to 56% and 27% yield losses, respectively. While no yield loss was reported by delaying the first of sequential applications until early postemergence, forgoing a preemergence application is not advisable given the multiple factors that may delay timely postemergence applications such as inclement weather.
Evaluation of optimal droplet size for control of Palmer amaranth (Amaranthus palmeri) with acifluorfen
- Lucas X. Franca, Darrin M. Dodds, Thomas R. Butts, Greg R. Kruger, Daniel B. Reynolds, J. Anthony Mills, Jason A. Bond, Angus L. Catchot, Daniel G. Peterson
-
- Journal:
- Weed Technology / Volume 34 / Issue 4 / August 2020
- Published online by Cambridge University Press:
- 20 January 2020, pp. 511-519
-
- Article
- Export citation
-
Acifluorfen is a nonsystemic PPO-inhibiting herbicide commonly used for POST Palmer amaranth control in soybean, peanut, and rice across the southern United States. Concerns have been raised regarding herbicide selection pressure and particle drift, increasing the need for application practices that optimize herbicide efficacy while mitigating spray drift. Field research was conducted in 2016, 2017, and 2018 in Mississippi and Nebraska to evaluate the influence of a range of spray droplet sizes [150 μm (Fine) to 900 μm (Ultra Coarse)], using acifluorfen to create a novel Palmer amaranth management recommendation using pulse width modulation (PWM) technology. A pooled site-year generalized additive model (GAM) analysis suggested that 150-μm (Fine) droplets should be used to obtain the greatest Palmer amaranth control and dry biomass reduction. Nevertheless, GAM models indicated that only 7.2% of the variability observed in Palmer amaranth control was due to differences in spray droplet size. Therefore, location-specific GAM analyses were performed to account for geographical differences to increase the accuracy of prediction models. GAM models suggested that 250-μm (Medium) droplets optimize acifluorfen efficacy on Palmer amaranth in Dundee, MS, and 310-μm (Medium) droplets could sustain 90% of maximum weed control. Specific models for Beaver City, NE, indicated that 150-μm (Fine) droplets provide maximum Palmer amaranth control, and 340-μm (Medium) droplets could maintain 90% of greatest weed control. For Robinsonville, MS, optimal Palmer amaranth control could be obtained with 370-μm (Coarse) droplets, and 90% maximum control could be sustained with 680 μm (Ultra Coarse) droplets. Differences in optimal droplet size across location could be a result of convoluted interactions between droplet size, weather conditions, population density, plant morphology, and soil fertility levels. Future research should adopt a holistic approach to identify and investigate the influence of environmental and application parameters to optimize droplet size recommendations.
Droplet size impact on lactofen and acifluorfen efficacy for Palmer amaranth (Amaranthus palmeri) control
- Lucas X. Franca, Darrin M. Dodds, Thomas R. Butts, Greg R. Kruger, Daniel B. Reynolds, J. Anthony Mills, Jason A. Bond, Angus L. Catchot, Daniel G. Peterson
-
- Journal:
- Weed Technology / Volume 34 / Issue 3 / June 2020
- Published online by Cambridge University Press:
- 26 December 2019, pp. 416-423
-
- Article
- Export citation
-
Herbicide applications performed with pulse width modulation (PWM) sprayers to deliver specific spray droplet sizes could maintain product efficacy, minimize potential off-target movement, and increase flexibility in field operations. Given the continuous expansion of herbicide-resistant Palmer amaranth populations across the southern and midwestern United States, efficacious and cost-effective means of application are needed to maximize Palmer amaranth control. Experiments were conducted in two locations in Mississippi (2016, 2017, and 2018) and one location in Nebraska (2016 and 2017) for a total of 7 site-years. The objective of this study was to evaluate the influence of a range of spray droplet sizes [150 (Fine) to 900 μm (Ultra Coarse)] on lactofen and acifluorfen efficacy for Palmer amaranth control. The results of this research indicated that spray droplet size did not influence lactofen efficacy on Palmer amaranth. Palmer amaranth control and percent dry-biomass reduction remained consistent with lactofen applied within the aforementioned droplet size range. Therefore, larger spray droplets should be used as part of a drift mitigation approach. In contrast, acifluorfen application with 300-μm (Medium) spray droplets provided the greatest Palmer amaranth control. Although percent biomass reduction was numerically greater with 300-μm (Medium) droplets, results did not differ with respect to spray droplet size, possibly as a result of initial plant injury, causing weight loss, followed by regrowth. Overall, 900-μm (Ultra Coarse) droplets could be used effectively without compromising lactofen efficacy on Palmer amaranth, and 300-μm (Medium) droplets should be used to achieve maximum Palmer amaranth control with acifluorfen.
Droplet Size Impact on Efficacy of a Dicamba-plus-Glyphosate Mixture
- Thomas R. Butts, Chase A. Samples, Lucas X. Franca, Darrin M. Dodds, Daniel B. Reynolds, Jason W. Adams, Richard K. Zollinger, Kirk A. Howatt, Bradley K. Fritz, Clint W. Hoffmann, Joe D. Luck, Greg R. Kruger
-
- Journal:
- Weed Technology / Volume 33 / Issue 1 / February 2019
- Published online by Cambridge University Press:
- 14 March 2019, pp. 66-74
-
- Article
- Export citation
-
Chemical weed control remains a widely used component of integrated weed management strategies because of its cost-effectiveness and rapid removal of crop pests. Additionally, dicamba-plus-glyphosate mixtures are a commonly recommended herbicide combination to combat herbicide resistance, specifically in recently commercially released dicamba-tolerant soybean and cotton. However, increased spray drift concerns and antagonistic interactions require that the application process be optimized to maximize biological efficacy while minimizing environmental contamination potential. Field research was conducted in 2016, 2017, and 2018 across three locations (Mississippi, Nebraska, and North Dakota) for a total of six site-years. The objectives were to characterize the efficacy of a range of droplet sizes [150 µm (Fine) to 900 µm (Ultra Coarse)] using a dicamba-plus-glyphosate mixture and to create novel weed management recommendations utilizing pulse-width modulation (PWM) sprayer technology. Results across pooled site-years indicated that a droplet size of 395 µm (Coarse) maximized weed mortality from a dicamba-plus-glyphosate mixture at 94 L ha–1. However, droplet size could be increased to 620 µm (Extremely Coarse) to maintain 90% of the maximum weed mortality while further mitigating particle drift potential. Although generalized droplet size recommendations could be created across site-years, optimum droplet sizes within each site-year varied considerably and may be dependent on weed species, geographic location, weather conditions, and herbicide resistance(s) present in the field. The precise, site-specific application of a dicamba-plus-glyphosate mixture using the results of this research will allow applicators to more effectively utilize PWM sprayers, reduce particle drift potential, maintain biological efficacy, and reduce the selection pressure for the evolution of herbicide-resistant weeds.