Quantum field theory predicts a nonlinear response of the vacuum to strong electromagnetic fields of macroscopic extent. This fundamental tenet has remained experimentally challenging and is yet to be tested in the laboratory. A particularly distinct signature of the resulting optical activity of the quantum vacuum is vacuum birefringence. This offers an excellent opportunity for a precision test of nonlinear quantum electrodynamics in an uncharted parameter regime. Recently, the operation of the high-intensity Relativistic Laser at the X-ray Free Electron Laser provided by the Helmholtz International Beamline for Extreme Fields has been inaugurated at the High Energy Density scientific instrument of the European X-ray Free Electron Laser. We make the case that this worldwide unique combination of an X-ray free-electron laser and an ultra-intense near-infrared laser together with recent advances in high-precision X-ray polarimetry, refinements of prospective discovery scenarios and progress in their accurate theoretical modelling have set the stage for performing an actual discovery experiment of quantum vacuum nonlinearity.

A more intuitive appreciation of spatial compliant behavior can be obtained through analysis and description of the behavior in terms of its centers, specifically the center of stiffness, the center of compliance, and the center of elasticity. This paper investigates the properties of each of these centers. Necessary and sufficient conditions for the coincidence of these centers are identified. A physical appreciation of those compliant behaviors that have coincident centers is obtained in terms of restrictions on the geometry of topologically simple mechanisms that realize those behaviors. The results can be used in the design of compliant mechanisms for robotic manipulation, especially when the compliance is characterized by the location of its center.

The importance of various sediment components in the oxidation of As(III) (arsenite) to As(V) (arsenate) by freshwater lake sediments in southern Saskatchewan was examined. Treating the sediments with hydroxylamine hydrochloride or sodium acetate to remove Mn greatly decreased the oxidation of As(III). Furthermore, synthetic Mn(IV) oxide was a very effective oxidant with respect to As(III): 216 µg As(V)/ml was formed in solution when 1000 µg As(III)/ml was added to suspensions of 0.1 g of the oxide. These results indicate that Mn in the sediment was probably the primary electron acceptor in the oxidation of As(III). The conversion of As(III) to As(V) by naturally occurring carbonate and silicate minerals common in sediments was not evident in the system studied. Sediment particles >20 µm in size are the least effective in oxidizing As(III); the oxidizing ability of the 5–20-, 2–5-, and <2-µm particle size fractions varies depending on the sediment. The concentration of As(V) in equilibrated solutions after adding increasing amounts of As(III) (as much as 100 µg/ml) to 1 g of the three sediments ranged from approximately 3.5 to 19 µg/ml. Because As(III) is more toxic and soluble than As(V), Mn-bearing components of both the colloidal and non-colloidal fractions of the sediments may potentially detoxify any As(III) that may enter aquatic environments by converting it to As(V). This is very important in reducing the As contamination and in maintaining the ecological balance in aquatic environments.

The adsorption of hydroxy-Al by the 2–0·2 μ size fractions of muscovite, biotite, K-depleted micas, vermiculite and montmorillonite was studied. The differences in the amounts of hydroxy-Al adsorbed were apparently related to the expansibility and layer charge of minerals, the ionic saturation and degree of K-depletion, the basicity (OH/Al ratio) of the equilibrating hydroxy-Al solution, and the solution-clay ratio. The CEC reduction was not necessarily proportional to the amount of Al adsorbed because CEC reduction may occur through occupation of cation exchange sites by hydroxy-Al, or through hindrance to the entry of the replacing cation to these sites. Aluminum interlayering generally increases the K/Ca cation exchange selectivity (CES) of Na-vermiculite and K-depleted biotite, whereas the K/Ca CES of Na-montmorillonite was little affected. The basicity of the initial hydroxy-Al solution appeared to affect the K/Ca CES of Na-vermiculite and K-depleted biotite by controlling the amount of hydroxyl-Al adsorbed. The data indicate that in addition to the “propping effect”, hydroxy-Al interlayers may affect the K/Ca CES through the following mechanisms; (1) the “preferential occupation” of Ca adsorbing sites, and/or (2) the “retarding effect” on the entry of the more hydrated Ca ions.

Ultrafast optical probing is a widely used method of underdense plasma diagnostic. In relativistic plasma, the motion blur limits spatial resolution in the direction of motion. For many high-power lasers the initial pulse duration of 30–50 fs results in a 10–15 μm motion blur, which can be reduced by probe pulse post-compression. Here we used the compression after compressor approach [Phys.-Usp. 62, 1096 (2019); JINST 17 P07035 (2022)], where spectral broadening is performed in thin optical plates and is followed by reflections from negative-dispersion mirrors. Our initially low-intensity probe beam was down-collimated for a more efficient spectral broadening and higher probe-to-self-emission intensity ratio. The setup is compact, fits in a vacuum chamber and can be implemented within a short experimental time slot. We proved that the compressed pulse retained the high quality necessary for plasma probing.

OBJECTIVES/GOALS: Early HIV detection and treatment are key to reducing patient morbidity and mortality, yet 40% of people living with HIV do not know their status. “OPT-OUT” approaches to hiv testing, in which patients #_MSOCOM_1 are informed that an HIV test will be conducted unless they decline, are being increasingly recognized as a means to increase HIV testing. METHODS/STUDY POPULATION: the ed at Uhealth tower (UHT) implemented #_MSOCOM_1 the focus program that integrates routine “opt-out” HIV screening into the existing electronic medical record workflow to increase the number of individuals who know their HIV status, optimize linkage to care, and reduce stigma associated with HIV. the emr facilitates the opt-out screening model and maximizes the use of information systems to seamlessly integrate screening as a routine practice in a high-volume ed. our partnership with the florida department of health in miami dade (FDOH) allows uht to verify whether cases are new or known /out-of-care, link individuals immediately to care, and increase efficiencies with real-time data reconciliation. RESULTS/ANTICIPATED RESULTS: since implementation#_MSOCOM_1, from October 2019 - Dec 2022, the UHT ED screened 34, 314 eligible patients for HIV, of which, 17, 850 were tested. 228 people with hiv were identified; 37 were newly diagnosed. of HIV+ Diagnoses, 54.67% of HIV+ individuals were black and 36.89% HISPANIC. HIV+ individuals were referred to the doh with linkage to care at 81%. comparatively, before the onset of focus, the ED ordered 38 HIV tests, with one positive from Oct 2018 TO Sept. 2019. DISCUSSION/SIGNIFICANCE: UHT ED’s focus “OPT-OUT” HIV testing is a valuable conduit for HIV detection, prevention, and care. OPT-OUT screening removes the stigma associated with hiv testing, fosters earlier diagnoses and treatment, reduces health disparities, and decreases the risk of transmission.

The influence of Mn2+ on the formation of Fe oxides at pHs of 6.0 and 8.0 and varying Mn/Fe molar ratios (0, 0.1, 1.0, and 10.0) in the FeCl2-NH4OH and FeSO4-NH4OH systems was studied by X-ray powder diffraction (XRD), infrared absorption, transmission electron microscopic, and chemical analyses. In the absence of Mn2+, lepidocrocite (γ-FeOOH) and maghemite (γ-Fe2O3) were the crystalline species formed at pHs of 6.0 and 8.0, respectively, in the FeCl2 system, whereas lepidocrocite and goethite (α-FeOOH) and lepidocrocite were the crystalline species formed at pHs of 6.0 and 8.0, respectively, in the FeSO4 system. The amount of Mn coprecipitated with Fe (as much as 8.1 mole % in the FeCl2 system and 15.0 mole % in the FeSO4 system) increased as the initial solution Mn/Fe molar ratio increased from 0 to 10.0, resulting in the perturbation of the crystallization processes of the hydrolytic products of Fe formed. At pH 6.0, the perturbation led to the formation of poorly ordered lepidocrocite, as reflected in the increasing broadening of its characteristic peaks in the XRD patterns. At pH 8.0, poorly ordered iepidocrocite and a honessite-like mineral (Mn-Fe-SO4-H2O) formed in the FeCl2 and FeSO4 systems, respectively.

The influence of manganese oxide minerals (cryptomelane, hausmannite, and pyrolusite) on the formation of iron oxides was studied in the FeCl2-NH4OH system at different Mn/Fe molar ratios (0, 0.01, 0.1, and 1.0) and pHs (3.0, 4.0, 5.0, and 6.0) by X-ray powder diffraction, infrared absorption, transmission electron microscopic, and chemical analyses. In the absence of Mn minerals, lepidocrocite (γ-FeOOH) precipitated at pHs 5.0 and 6.0; however, no precipitate formed at lower pHs. All the Mn minerals studied promoted the precipitation of iron oxides and oxyhydroxides. In the presence of Mn oxides, Fe2+ was oxidized to Fe3+, which hydrolyzed and precipitated as noncrystalline and/or different crystalline iron oxides and oxyhydroxides, depending on the nature of the Mn oxides present in the system. Simultaneously, Mn2+ was detected in solution after the reaction by electron spin resonance spectroscopy. The presence of cryptomelane and hausmannite resulted in the formation of åkaganeite (β-FeOOH) and magnetite (Fe3O4), respectively. Thus, the effect of Mn oxides on the formation of Fe oxide minerals in the weathering zone merits attention.

Hydroxide and oxyhydroxide products of aluminum were formed at room temperature at an initial Al concentration of 2 × 10-3 M, pH 8.2, and at varying concentrations of organic and inorganic ligands commonly found in nature. The effectiveness of the ligands in promoting the formation of noncrystalline products over crystalline Al(OH)3 polymorphs was found to be in the following order: phthalate ≅ succinate < glutamate < aspartate < oxalate < silicate ≅ fluoride < phosphate < salicylate ≅ malate < tannate < citrate < tartrate. The lowest ligand/Al molar ratio at which the production of Al hydroxides or oxyhydroxides was inhibited ranged from 0.02 to 15. Above critical ligand/Al ratios, crystalline products were inhibited and ligands coprecipitated with noncrystalline products which remained unchanged for at least 5 months. Polydentate and large ligands generally were more inhibitive than those with fewer functional groups or of smaller size.

The perturbing ligands promoted and stabilized the formation of pseudoboehmite over crystalline Al(OH)3 polymorphs in the following sequence: chloride < sulfate < phthalate ≅ succinate < glutamate < silicate < aspartate < phosphate < salicylate ≅ malate < tannate < citrate < tartrate. The optimal range of the ligand/Al molar ratios for the formation of pseudoboehmite varied, for example, from 0.005–0.015 for tartrate to 600–1000 for chloride. Pseudoboehmite was not formed in the presence of fluoride.

Reactions between hydroxy-Al ions and orthosilicic acid as influenced by citric acid were studied at an initial Si concentration of 1.6 × 10−3 M, Si/Al molar ratios of 0.5 and 1.0, OH/Al molar ratios of 1.0-3.0, and citric acid/Al molar ratios of 0-0.3. In the absence of citric acid and at OH/A1 ratios of 1.0-2.8, imogolite (>0.01 μm) was dominant in the precipitates. At citric acid/Al ratios of 0.01-0.1, imogolite and/or pseudoboehmite were dominant in the precipitates at OH/Al ratios of 1.0 and 2.0, and imogolite and/or ill-defined aluminosilicate complexes at OH/Al ratio of 2.8. Instead of allophane or “proto-imogolite” allophane being the predominant species in the precipitates, the formation of ill-defined aluminosilicate complexes at OH/Al ratio of 3.0 was steadily promoted by increasing the solution citric acid/Al ratios from 0 to 0.3. The freeze-dried soluble products (<0.01 μ) ranged from silica gel to “proto-imogolite,” depending upon the basicity of Al and the level of citric acid of the parent solution. The amount of “proto-imogolite” increased with increasing citric acid/Al ratios from 0 to 0.1 in solution. Complexing low molecular weight organic acids, such as citric acid, impeded the formation of the short-range ordered aluminosilicates, allophanes and imogolite.

The formation of hydroxy-Al-interlayered montmorillonite was affected by complexing organic acids. Montmorillonite (<2.0 μm) was aged for three months at an initial pH of 5.0 or 6.0 in AlCl3 solutions containing citric or tannic acid at organic acid/Al molar ratios from 0 to 1.0. The Al/clay ratio in the system was 900 meq Al3+/100 g of montmorillonite. Ion-exchange experiments revealed that organically complexed Al ions have both positive and negative charges. Evidence from X-ray powder diffraction, electron microscopic examination, measurements of specific surface, cation-exchange capacity, organic carbon, and the nature of sorbed Al indicates that citric and tannic acids influence differently the hydroxy-Al interlayer formation in montmorillonite. Hydroxy-Al-citrate can be adsorbed as interlayers in montmorillonite, but hydroxy-Al-tannate exists principally as a separate phase binding the clay particles. The differences observed between the influence of citric and tannic acids on Al interlayering are probably due to their differences in molecular weight (size) and structure.

The effects of humic acid (HA) on the crystallization of precipitation products of Al under mildly acidic to alkaline conditions were investigated. The extent of Al precipitation substantially decreased with increasing HA concentration (0 to 75 µg/ml) in the pH range 6 to 10 during the 80-day aging period. The X-ray powder diffraction (XRD) data show that, at pH 6.0, the amount of pseudoboehmite formed in the systems decreased with the increasing concentration of HA present. The proportion of Al hydroxide polymorphs (gibbsite and bayerite) was greatly influenced by the amounts of HA present in the systems. At pH 6.0 and HA concentration of 37.5 µg/ml, all the precipitation products of Al were noncrystalline. At pH 8.0 and a HA concentration of 12.5 µg/ml, the formation of gibbsite and bayerite was completely inhibited and only pseudoboehmite was evident in the XRD patterns. Further increase in HA concentration (25–75 µg/ml HA) at pH 8.0 resulted in no precipitation of Al, and only a broad peak at ∼3.3 Å, characteristic of HA, was observed. The XRD patterns of the precipitates of Al formed in the absence of HA at pH 10.0 showed the characteristic peaks of bayerite. At pH 10.0, the precipitation products of Al formed even at the HA concentration of 2.5 µg/ml yielded no XRD peaks. Infrared absorption spectra and transmission electron micrographs of the precipitation products of Al formed in the systems studied substantiate the findings obtained by XRD. The data obtained in this study indicate that HA affects the formation of Al hydroxide polymorphs, pseudoboehmites and short-range ordered mineral colloids.