The knowledge of the critical periods of crop-weed competition is crucial for designing weed management strategies in cropping systems. In the Lower Yangtze Valley, China, field experiments were conducted in 2011 and 2012 to study the effect of interference from mixed natural weed populations on cotton growth and yield and determine the critical period for weed control (CPWC) in direct-seeded cotton. Two treatments were applied: allowing weeds to infest the crop or keeping plots weed-free for increasing periods (0, 1, 2, 4, 6, 8, 10, 12, 14, and 20 weeks) after crop emergence. The results showed that mixed natural weed infestations led to 35 to 55 cm shorter cotton plants with stem diameters 10 to 13 mm smaller throughout the season, fitting well with modified Gompertz and logistic models, respectively. Season-long competition with weeds reduced the number of fruit branches per plant by 65% to 82%, decreasing boll number per plant by 86% to 96% and single boll weight by approximately 24%. Weed-free seed cotton yields ranged from 2,900 to 3,130 kg ha-1, while yield loss increased with the duration of weed infestation, reaching up to 83% to 96% compared with permanent weed-free plots. Modified Gompertz and logistic models were used to analyze the impact of increasing weed control duration and weed interference on relative seed cotton yield (percentage of season-long weed-free cotton), respectively. Based on a 5% yield-loss threshold, the CPWC was found to be from 145 growing degree days (GDD) to 994 GDD, corresponding to 14 days after emergence (DAE) to 85 DAE. These findings emphasize the importance of implementing effective weed control measures from 14 DAE to 85 DAE in the Lower Yangtze Valley, China, to prevent crop losses exceeding a 5% yield-loss threshold.

The Early-Middle Jurassic impression/compression macroflora and the palynoflora from the Qaidam Basin in the northeastern Qinghai-Xizang (Tibetan) Plateau have been well studied; however, fossil wood from this region has not been previously documented systematically. Here, we describe an anatomically well-preserved fossil wood specimen from the Lower Jurassic Huoshaoshan Formation at the Dameigou section in northern Qinghai Province, northwestern China. This fossil exhibits typical Metapodocarpoxylon Dupéron-Laudoueneix et Pons anatomy with usually araucarian radial tracheid pits and variable cross-field pits, representing a new record for Metapodocarpoxylon in the Qaidam Basin. This discovery indicates that trees with this type of wood anatomy were not confined to northern Gondwana but also grew in more northerly regions in Laurasia. The wood displays distinct growth rings, with abundant, well-formed earlywood and narrow latewood. This observation, along with previous interpretations based on macroflora, palynoflora and sedimentological data, suggests that a warm and humid climate with mild seasonality prevailed in the region during the Early Jurassic.

Green water loads on prismatic obstacles (representing topside structures) mounted on the raised deck of a simplified vessel are investigated using computational fluid dynamics simulations and physical model testing with emphasis on examining different structure shapes, orientation angles and relative structure size. For each scenario investigated, several flow features are identified that characterize the green water interaction with the structure and influence loads, namely delayed flow diversion, formation of a vertical jet, scattered wave formation and the development of complex wake patterns. Comparing across structures, these interactions are more pronounced for blunt objects, and the associated force impulse is larger. For example, a cube with flow at normal incidence is found to experience approximately twice the force impulse of a circular cylinder of the same projected area. Equally, rotation of the cube leads to reduced run-up height and streamwise force on the structure. To explain these trends, a theoretical model based on Newtonian flow theory is adopted. This model provides an estimate of the streamwise force exerted on obstacles in high-Froude-number flows and shows good agreement with the numerical results when the flow is supercritical, shallow (small water depth relative to structure width) and the structure is tall (large structure height relative to water depth). Despite some limitations, the model should provide an efficient force prediction tool for practical use in design.

Drawing upon research on the visual complexity effect and Dual Coding Theory, this research examined the influence of character properties and the role of individual learner differences in Chinese character acquisition. The participants included 248 Chinese-speaking children in grades 1 through 3 in Taiwan. The study extended the scope of previous research by concurrently examining two types of cognitive processing: activation of verbal codes with nonverbal codes (activation of word form) and activation of nonverbal codes with verbal codes (activation of meaning). Results revealed the asymmetry in the two types of cognitive processing. Regarding the influence of character properties, while characters with less visual complexity and with radical presence are generally more acquirable, the interaction between these two properties was only present in the activation of meaning but not the activation of word form. Individual differences contributing to character acquisition did not mirror each other in the two directions of cognitive processing either. The contribution of radical awareness and visual skills remained the same across grade levels in the activation of meaning but varied with grades and the properties of the characters in the activation of word form. The methodological and theoretical contributions of the study were discussed.

Fiber Bragg grating-based Raman oscillators are capable of achieving targeted frequency conversion and brightness enhancement through the provision of gain via stimulated Raman scattering across a broad gain spectrum. This capability renders them an exemplary solution for the acquisition of high-brightness, specialized-wavelength lasers. Nonetheless, the output power of all-fiber Raman oscillators is typically limited to several hundred watts, primarily due to limitations in injectable pump power and the influence of higher-order Raman effects, which is inadequate for certain application demands. In this study, we introduce an innovative approach by employing a graded-index fiber with a core diameter of up to 150 μm as the Raman gain medium. This strategy not only enhances the injectable pump power but also mitigates higher-order Raman effects. Consequently, we have successfully attained an output power of 1780 W for the all-fiber Raman laser at 1130 nm, representing the highest output power in Raman fiber oscillators with any configuration reported to date.

The maser instability associated with the loss-cone distribution has been widely invoked to explain the radio bursts observed in the astrophysical plasma environment, such as aurora and corona. In the laboratory plasma of a tokamak, events reminiscent of these radio bursts have also been frequently observed as an electron cyclotron emission (ECE) burst in the microwave range ($\mathrm{\sim }2{f_{\textrm{ce}}}$ near the last closed flux surface) during transient magnetohydrodynamic events. These bursts have a short duration of ~10 μs and display a radiation spectrum corresponding to a radiation temperature ${T_{e,\textrm{rad}}}$ of over $30\ \textrm{keV}$ while the edge thermal electron temperature ${T_e}$ is only in the range of $1\ \textrm{keV}$. Suprathermal electrons can be generated through magnetic reconnection, and a loss-cone distribution can be generated through open stochastic field lines in the magnetic mirror of the near-edge region of a tokamak plasma. Radiation modelling shows that a sharp distribution gradient $\partial f/\partial {v_ \bot } > 0$ at the loss-cone boundary can cause a negative absorption of ECE radiation through the maser instability. The negative absorption then amplifies the radiation so that the microwave intensity is significantly stronger than the thermal value. The significant ${T_{e,\textrm{rad}}}$ from the simulations suggests the potential role of the loss-cone maser instability in generating the ECE burst in a tokamak.

Isolated multi-MeV $\gamma$-rays with attosecond duration, high collimation and beam angular momentum (BAM) may find many interesting applications in nuclear physics, astrophysics, etc. Here, we propose a scheme to generate such $\gamma$-rays via nonlinear Thomson scattering of a rotating relativistic electron sheet driven by a few-cycle twisted laser pulse interacting with a micro-droplet target. Our model clarifies the laser intensity threshold and carrier-envelope phase effect on the generation of the isolated electron sheet. Three-dimensional numerical simulations demonstrate the $\gamma$-ray emission with 320 attoseconds duration and peak brilliance of $9.3\times 10^{24}$ photons s${}^{-1}$ mrad${}^{-2}$ mm${}^{-2}$ per 0.1$\%$ bandwidth at 4.3 MeV. The $\gamma$-ray beam carries a large BAM of $2.8 \times 10^{16}\mathrm{\hslash}$, which arises from the efficient BAM transfer from the rotating electron sheet, subsequently leading to a unique angular distribution. This work should promote the experimental investigation of nonlinear Thomson scattering of rotating electron sheets in large laser facilities.

Compacted bentonite, used as an engineering barrier for permanent containment of high-level radioactive waste, is susceptible to mineral evolution resulting in compromise of the expected barrier performance due to alkaline–thermal chemical interaction in the near-field. To elucidate the mineral-evolution mechanisms within bentonite and the transformation of the nuclide adsorption properties during that period, experimental evolution of bentonite was conducted in a NaOH solution with a pH of 14 at temperatures ranging from 60 to 120°C. The results showed that temperature significantly affects the stability of minerals in bentonite under alkali conditions. The dissolution rate of fine-grained cristobalite in bentonite exceeds that of smectite, with the phase-transition products of smectite being temperature-dependent. As the temperature rises, smectite experiences a three-stage transformation: initially, at 60°C, the lattice structure thins due to the collapse of the octahedral sheets; at 80°C, the lattice disintegrates and reorganizes into a loose framework akin to albite; and by 100°C, it further reorganizes into a denser framework resembling analcime. The adsorption properties of bentonite exhibit a peak inflection point at 80°C, where the dissolution of the smectite lattice eliminates interlayer pores and exposes numerous polar or negatively charged sites which results in a decrease in specific surface area and an increase in cation exchange capacity and adsorption capacity of Eu3+. This research provides insights into the intricate evolution of bentonite minerals and the associated changes in radionuclide adsorption capacity, contributing to a better understanding of the stability of bentonite barriers and the effective long-term containment of nuclear waste.

In recent years, unmanned aerial vehicles (UAVs) have been applied in underground mine inspection and other similar works depending on their versatility and mobility. However, accurate localization of UAVs in perceptually degraded mines is full of challenges due to the harsh light conditions and similar roadway structures. Due to the unique characteristics of the underground mines, this paper proposes a semantic knowledge database-based localization method for UAVs. By minimizing the spatial point-to-edge distance and point-to-plane distance, the relative pose constraint factor between keyframes is designed for UAV continuous pose estimation. To reduce the accumulated localization errors during the long-distance flight in a perceptual-degraded mine, a semantic knowledge database is established by segmenting the intersection point cloud from the prior map of the mine. The topological feature of the current keyframe is detected in real time during the UAV flight. The intersection position constraint factor is constructed by comparing the similarity between the topological feature of the current keyframe and the intersections in the semantic knowledge database. Combining the relative pose constraint factor of LiDAR keyframes and the intersection position constraint factor, the optimization model of the UAV pose factor graph is established to estimate UAV flight pose and eliminate the cumulative error. Two UAV localization experiments conducted on the simulated large-scale Edgar Mine and a mine-like indoor corridor indicate that the proposed UAV localization method can realize accurate localization during long-distance flight in degraded mines.

Early-season rice often faces limited market competition due to its lower quality, which diminishes farmers' incentives to cultivate it. Developing specific early-season rice varieties tailored for rice noodle production represents a practical solution to this challenge. However, limited information exists on the varietal differences regarding the yield and quality of noodles produced from early-season rice and their determinants. To address this gap, this study conducted field experiments with 15 early-season rice varieties during 2022 and 2023. The results revealed significant varietal differences in rice noodle yield per unit of land area and cooking and eating (texture) qualities of the noodles, with the variety Zhuliangyou 4024 standing out for its ability to produce rice noodles that are both high yielding and of superior cooking and eating qualities. Correlation analysis showed the yield of rice noodles per unit of land area was significantly related to grain yield per unit of land, which in turn was linked to grain weight. Additionally, the analysis showed the cooking loss rate of rice noodles and their chewiness were significantly correlated with both amylose and amylopectin content, whereas the hardness, springiness, and resilience of cooked rice noodles were significantly correlated only with amylose content. However, partial correlation analysis indicated that all these quality traits were significantly correlated solely with amylose content when controlling the influence of other chemical properties. These findings indicate that selecting early-season rice varieties with high grain weight and high amylose content can lead to the production of high-yield and high-quality rice noodles.

Artificial sweeteners are generally used and recommended to alternate added sugar for health promotion. However, the health effects of artificial sweeteners remain unclear. In this study, we included 6371 participants from the National Health and Nutrition Examination Survey with artificial sweetener intake records. Logistic regression and Cox regression were applied to explore the associations between artificial sweeteners and risks of cardiometabolic disorders and mortality. Mendelian randomisation was performed to verify the causal associations. We observed that participants with higher consumption of artificial sweeteners were more likely to be female and older and have above medium socio-economic status. After multivariable adjustment, frequent consumers presented the OR (95 % CI) for hypertension (1·52 (1·29, 1·80)), hypercholesterolaemia (1·28 (1·10, 1·50)), diabetes (3·74 (3·06, 4·57)), obesity (1·52 (1·29, 1·80)), congestive heart failure (1·89 (1·35, 2·62)) and heart attack (1·51 (1·10, 2·04)). Mendelian randomisation confirmed the increased risks of hypertension and type 2 diabetes. Moreover, an increased risk of diabetic mortality was identified in participants who had artificial sweeteners ≥ 1 daily (HR = 2·62 (1·46, 4·69), P = 0·001). Higher consumption of artificial sweeteners is associated with increased risks of cardiometabolic disorders and diabetic mortality. These results suggest that using artificial sweeteners as sugar substitutes may not be beneficial.

Understanding the yield attributes of rice crops grown at super high-yielding sites is useful for identifying how to achieve super high yield in rice. In this study, field experiments were conducted in 2021 and 2022 to compare grain yield and yield attributes of ten high-yielding hybrid rice varieties between Xingyi (a super high-yielding site) and Hengyang (a site with typical yields). Results showed that Xingyi produced an average grain yield of 13.4 t ha−1 in 2021 and 14.0 t ha−1 in 2022, which were, respectively, 20% and 44% higher than those at Hengyang. Higher panicles per m2 and higher grain weight were responsible for the higher grain yield at Xingyi compared to Hengyang. The higher values of panicles per m2 and grain weight at Xingyi compared to Hengyang were due to greater source capacity resulting from improved pre-heading biomass production. This study suggests that simultaneously increasing panicle number and grain weight through improving pre-heading biomass production is a potential way to achieve super high yield in rice.

In design education, integrating digital tools has revolutionized pedagogical approaches. This study examines the impact of VR HMDs and PC screens on learning ancient Chinese architecture using a virtual tour. Involving 22 students, it assessed simulator sickness, user experience, and spatial awareness. Results show VR had a more positive spatial learning experience but the same learning outcomes. VR enhances presence but increases simulator sickness. The study underscores VR's potential and limitations in ancient Chinese architectural education, suggesting future research directions.

Snails and freshwater fish were examined from four ponds in the Meinung township in which Clonorchis sinensis was known to be endemic 18 years ago. No metacercariae were found in 478 Tilapia nilotica, whereas of 451 Ctenopharyngodon idellus examined, 16.2%, 3.3% and 0.9% were found to be infected with Haplorchis pumilio, H. taichui and Clonorchis sinensis, respectively. In addition, there were some unidentified metacercariae in 12.0% of Ctenopharyngodon idellus examined. Overall, no positive correlation between infection rates and sizes of infected fish was shown. Six species of snails were collected in this survey and two frequently-occurring snails, Melanoides tuberculata and Thiara granifera were commonly infected with H. pumilio. Reasons for the prevalence of Haplorchis species and the absence of Clonorchis sinensis in fish and snail hosts in a previously reported endemic area for human clonorchiasis are discussed.

Clay mineral compositions from 2 paleosol profiles (Chu-Wan, CW, and Shiao-Men Yu, SMY, profiles) on the late-Miocene sediments in Penghu Islands (Pescadores), Taiwan, are characterized by random X-ray powder diffraction (XRD) and transmission electron microscopy (TEM). By the clay assemblage of the paleosol profile, we want to explore the probable formation mode of the Penghu paleosols.

The paleosol profiles in study are overlain by a layer of basalt flow. However, the clay mineralogy of the 2 paleosols was not altered metasomatically after burial. Results show that 3 distinctive zones of different dominating kaolin-group minerals are apparent in the profiles. In descending order, they are: 1) spheroidal, hollow 7Å-halloysite, 2) platy, irregular-shaped and disordered kaolinite, and 3) platy, irregular-shaped, disordered kaolinite. The relative crystallinity of kaolin minerals of the 3 layers is: layer 2 > layer 3 > layer 1. On the basis of the XRD, TEM analyses and the crystallinity calculations, the distribution of kaolin in Penghu paleosol profiles appears to be unique. Penghu paleosol profiles show systematic change in kaolin crystallinity and polymorphs with depth. Because the clay type is heterogeneous within the profile, this represents that Penghu paleosol profiles were polypedogenic.

The contact between the upper basalt and the paleosol is the erosion surface, so we do not know exactly what the thickness of the original paleosol was. The first layer (about 20 cm) of the profiles appears to be constituents of the original paleosol. It contains high contents of pedogenic (in situ weathering) hematites and 7Å-halloysites, which implies that the local climate of the Penghu Islands at late Miocene was warm and humid. Intense leaching and dry/wet cycle should be the reason for high contents of halloysite (>60%) in the Penghu paleosols. Laterization was the probable pedogenic process for the formation of the paleosols.