Particle-laden flow through conduits is ubiquitous in both natural and industrial systems. In such flows, particles often migrate across the main fluid stream, resulting in non-uniform spatial distribution owing to particle–fluid and particle–particle interactions. The most relevant lateral particle migration mechanism by particle–fluid interaction is the Segré–Silberberg effect, which is induced by the inertial forces exerted on a particle, as the flow rate increases. However, methods to suppress it have not been suggested yet. Here, we demonstrate that adding a small amount of polymer to the particle-suspending solvent effectively suppresses the Segré–Silberberg effect in a square channel. To accurately determine the position of the particles within the channel cross-sections, we devised a dual-view imaging system applicable to microfluidic systems. Our analyses show that the Segré–Silberberg effect is effectively suppressed in a square microchannel due to the balance between the inertial and elastic forces at an optimal polymer concentration while maintaining nearly constant shear viscosity.

Many transgenic domestic animals have been developed to produce therapeutic proteins in the mammary gland, and this approach is one of the most important methods for agricultural and biomedical applications. However, expression and secretion of a protein varies because transgenes are integrated at random sites in the genome. In addition, distal enhancers are very important for transcriptional gene regulation and tissue-specific gene expression. Development of a vector system regulated accurately in the genome is needed to improve production of therapeutic proteins. The objective of this study was to develop a knock-in system for expression of human fibroblast growth factor 2 (FGF2) in the bovine β-casein gene locus. The F2A sequence was fused to the human FGF2 gene and inserted into exon 3 of the β-casein gene. We detected expression of human FGF2 mRNA in the HC11 mouse mammary epithelial cells by RT-PCR and human FGF2 protein in the culture media using western blot analysis when the knock-in vector was introduced. We transfected the knock-in vector into bovine ear fibroblasts and produced knock-in fibroblasts using the clustered regularly interspaced short palindromic repeats (CRISPR)/Cas9 system. Moreover, the CRISPR/Cas9 system was more efficient than conventional methods. In addition, we produced knock-in blastocysts by somatic cell nuclear transfer using the knock-in fibroblasts. Our knock-in fibroblasts may help to create cloned embryos for development of transgenic dairy cattle expressing human FGF2 protein in the mammary gland via the expression system of the bovine β-casein gene.

During the past decade, carbapenemase-producing Enterobacteriaceae (CPE) has emerged and spread across the world.1 The major carbapenemase enzymes currently being reported are KPC, NDM-1, VIM, IMP, and OXA.2 Because carbapenemase can be effectively transmitted via mobile genetic elements, and current therapeutic options for CPE infections are extremely limited, CPE may be one of the most serious contemporary threats to public health. However, very little is known about the characteristics of CPE carriage during hospitalization. The aims of this study were to investigate the clearance rate of CPE carriage and determine the number of consecutive negative cultures required to confirm CPE clearance. We also examined CPE transmission among hospitalized patients.

Infect. Control Hosp. Epidemiol. 2015;36(11):1361–1362

The formation and morphological evolution of germanides formed in a ternary Ni/Ta-interlayer/Ge system were examined by ex situ and in situ annealing experiments. The Ni germanide film formed in the Ni/Ta-interlayer/Ge system maintained continuity up to 550°C, whereas agglomeration of the Ni germanide occurred in the Ni/Ge system without Ta-interlayer. Through microstructural and chemical analysis of the Ni/Ta-interlayer/Ge system during and after in situ annealing in a transmission electron microscope, it was confirmed that the Ta atoms remained uniformly on the top of the newly formed Ni germanide layer during the diffusion reaction. Consequently, the agglomeration of the Ni germanide film was retarded and the thermal stability was improved by the Ta incorporation.

Analytical electron microscopy (AEM) was used to examine the initial interfacial reaction layers between a eutectic Sn–3.5Ag solder and an electroless nickel-immersion gold-plated (ENIG) Cu substrate during reflow at 255 °C for 1 s. AEM confirmed that a thick upper (Au,Ni)Sn2 layer and a thin Ni3Sn4 layer had formed through the reaction between the solder and ENIG. The amorphous electroless Ni(P) plated layer transformed into two P-rich Ni layers. One is a crystallized P-rich Ni layer, and the other is an intermediate state P-rich Ni layer before the crystallization. The crystallized P-rich layer consisted of Ni2P and Ni12P5. A thin Ni2P layer had formed underneath the Ni3Sn4 layer and is believed to be a predecessor of the Ni2SnP ternary phase. A Ni12P5 phase was observed beneath the Ni2P thin layer. In addition, nanocrystalline Ni was found to coexist with the amorphous Ni(P) phase in the intermediate state P-rich Ni layer.