This paper provides an overview of the current status of ultrafast and ultra-intense lasers with peak powers exceeding 100 TW and examines the research activities in high-energy-density physics within China. Currently, 10 high-intensity lasers with powers over 100 TW are operational, and about 10 additional lasers are being constructed at various institutes and universities. These facilities operate either independently or are combined with one another, thereby offering substantial support for both Chinese and international research and development efforts in high-energy-density physics.

The knowledge of the critical periods of crop-weed competition is crucial for designing weed management strategies in cropping systems. In the Lower Yangtze Valley, China, field experiments were conducted in 2011 and 2012 to study the effect of interference from mixed natural weed populations on cotton growth and yield and determine the critical period for weed control (CPWC) in direct-seeded cotton. Two treatments were applied: allowing weeds to infest the crop or keeping plots weed-free for increasing periods (0, 1, 2, 4, 6, 8, 10, 12, 14, and 20 weeks) after crop emergence. The results showed that mixed natural weed infestations led to 35 to 55 cm shorter cotton plants with stem diameters 10 to 13 mm smaller throughout the season, fitting well with modified Gompertz and logistic models, respectively. Season-long competition with weeds reduced the number of fruit branches per plant by 65% to 82%, decreasing boll number per plant by 86% to 96% and single boll weight by approximately 24%. Weed-free seed cotton yields ranged from 2,900 to 3,130 kg ha-1, while yield loss increased with the duration of weed infestation, reaching up to 83% to 96% compared with permanent weed-free plots. Modified Gompertz and logistic models were used to analyze the impact of increasing weed control duration and weed interference on relative seed cotton yield (percentage of season-long weed-free cotton), respectively. Based on a 5% yield-loss threshold, the CPWC was found to be from 145 growing degree days (GDD) to 994 GDD, corresponding to 14 days after emergence (DAE) to 85 DAE. These findings emphasize the importance of implementing effective weed control measures from 14 DAE to 85 DAE in the Lower Yangtze Valley, China, to prevent crop losses exceeding a 5% yield-loss threshold.

Barnyardgrass [Echinochloa crus-galli (L.) P. Beauv.] is a dominant weed species occurring in rice fields across China. Metamifop, a common herbicide, is frequently applied to control E. crus-galli and other grassy weeds in rice fields. Herein, HS01, an E. crus-galli population suspected to be resistant (R) to metamifop, was collected from Hanshan County in Anhui Province. Whole-plant dose-response testing revealed that, compared with the susceptible (S) population FD03, HS01 had developed high-level resistance to metamifop with a resistance index (RI) of 11.76 and showed cross-resistance to cyhalofop-butyl (RI=9.33), fenoxaprop-P-ethyl (RI=5.80) and clethodim (RI=3.24). Gene sequencing revealed a Cys-2088-Arg mutation in ACCase 1,5 allele of all the R plants, while ACCase gene overexpression was not involved in the resistance. Molecular docking indicated that the less negative binding energies might be the main reason for the resistance of HS01 to ACCase-inhibiting herbicides. A derived cleaved amplified polymorphic sequence (dCAPS) method was developed for the rapid identification of the Cys-to-Arg mutation in the ACCase gene at codon position 2088 in E. crus-galli. Additionally, pretreatment with the cytochrome P450 inhibitor piperonyl butoxide or the glutathione S-transferase inhibitor 4-chloro-7-nitrobenzoxa-diazole had no significant effects (p> 0.05) on the resistance of HS01 to metamifop. To our knowledge, this is the first report of a Cys-2088-Arg mutation in E. crus-galli ACCase that confers cross-resistance to ACCase-inhibiting herbicides.

Polycarboxylate superplasticizer (PCE) is a widely used water-reducing agent that can reduce significantly the water demand of concrete, which reduces the porosity and enhances the strength and durability of the concrete. (The PCE consists of a single backbone with many long PEO side chains.) Generally, aggregate occupies >70 wt.% of concrete; clay minerals are ubiquitous in nature and are difficult to avoid in mined aggregates. Clay minerals in aggregate often render the PCE ineffective and give rise to rapid loss of the fluidity of the concrete; this phenomenon is referred to as ‘poor clay tolerance of PCE.’ Though the poor clay tolerance of PCE is known widely, the relationship between the clay tolerance and the molecular structure of the PCE, in particular the effect of the side-chain structures, on clay tolerance is not understood completely. The objective of the present study was to determine the effect of different grafting densities of polyethylene oxide (PEO) side chains on the clay tolerance of PCE. The raw materials included mainly PCE, which was synthesized using acrylic acid and isopentenol polyoxyethylene ether, and a natural montmorillonite (Mnt), one of the most common clay minerals. The loss of fluidity of the cement paste was tested to assess the clay tolerance; total organic carbon was used to measure the amount of PCE adsorbed; X-ray diffraction, transmission electron microscopy, Fourier-transform infrared spectroscopy, and thermogravimetric analysis were used to investigate the microstructure of the intercalated Mnt. The results showed that preventing the superficially adsorbed PCE from being intercalated into Mnt was of great importance in terms of the improvement in clay tolerance of PCE, which increased with greater grafting density of PEO in the side chain of the PCE. The results also suggested the possibility that polymers which intercalate preferentially into the Mnt could improve significantly the clay tolerance of the PCE system.

It is now generally believed that elderly may have slightly higher dietary protein requirements than those of the young-middle-aged adults. We have previously conducted related studies by the indicator amino acid oxidation (IAAO) technique, but more research data are needed to revise the protein requirements of the elderly. The main objective was to reevaluate the dietary protein requirements of healthy Chinese adults (65–80 years) without sarcopenia by using the IAAO technique. Nine healthy adult men and seven healthy adult women participated in the study, with protein intakes ranging from 0·1 to 1·8 g/(kg·d). Diets that delivered energy at a 1·5 resting energy expenditure were isocaloric. The amounts of phenylalanine and tyrosine needed to remain constant for each protein dosage. By applying a nonlinear mixed-effects model analysis on the F13CO2 data, which revealed a breakpoint in F13CO2 in response to graded protein intakes, the mean protein requirement was calculated. The mean estimated average requirement (EAR) for healthy elderly Chinese adults without sarcopenia was determined to be 0·94 g/(kg·d). The protein recommended nutrient intake (RNI) determined using various derivation approaches ranged from 1·13 to 1·36 g/(kg·d). The EAR for Chinese adults without sarcopenia aged 65–80 years in this study is 6·8 % higher than the current recommended EAR (0·88 g/(kg·d)). The RNI derived using various derivation approaches are all greater than the current RNI (0·98 g/(kg·d)). This trial was registered with the Chinese clinical trial registry as ChiCTR2200061382.

HIV-1 molecular surveillance provides a new approach to explore transmission risks and targeted interventions. From January to June 2021, 663 newly reported HIV-1 cases were recruited in Zhaotong City, Yunnan Province, China. The distribution characteristics of HIV-1 subtypes and HIV-1 molecular network were analysed. Of 542 successfully subtyped samples, 12 HIV-1 strains were identified. The main strains were CRF08_BC (47.0%, 255/542), CRF01_AE (17.0%, 92/542), CRF07_BC (17.0%, 92/542), URFs (8.7%, 47/542), and CRF85_BC (6.5%, 35/542). CRF08_BC was commonly detected among Zhaotong natives, illiterates, and non-farmers and was mostly detected in Zhaoyang County. CRF01_AE was frequently detected among married and homosexual individuals and mostly detected in Weixin and Zhenxiong counties. Among the 516 pol sequences, 187 (36.2%) were clustered. Zhaotong natives, individuals aged ≥60 years, and illiterate individuals were more likely to be found in the network. Assortativity analysis showed that individuals were more likely to be genetically associated when stratified by age, education level, occupation, and reporting area. The genetic diversity of HIV-1 reflects the complexity of local HIV epidemics. Molecular network analyses revealed the subpopulations to focus on and the characteristics of the risk networks. The results will help optimise local prevention and control strategies.

An experimental investigation of the stereocamera's systematic error is carried out to optimize three-dimensional (3-D) dust observation on the HL-2A tokamak. It is found that a larger 3-D region occupied by all calibration points is able to reduce the 3-D reconstruction systematic error of the stereocamera. In addition, the 3-D reconstruction is the most accurate around the region where the calibration points are located. Based on these experimental results, the design of the stereocamera on the HL-2A tokamak is presented, and a set of practical procedures to optimize the 3-D reconstruction accuracy of the stereocamera are proposed.

Pharmacological treatment of major depressive disorder is often inefficient, and multiple strategies are used for inadequate response to antidepressants. Second-generation antipsychotics are used as augmentation measures in clinical practice; evidence of their efficacy and acceptability is insufficient, and it remains confusing as to which drug should be selected first. In this systematic review and network meta-analysis, we included randomised controlled trials of second-generation antipsychotics used as adjunctive treatment in patients with suboptimal responses. Outcome measures were efficacy (response and remission) and acceptability (dropout due to any reason and adverse events). Thirty-three trials comprising 10 602 participants were included. Regarding efficacy, response rates indicated that all antipsychotics except for ziprasidone were more efficacious than the placebo, with the odds ratios (ORs) ranging from 1.34 for olanzapine and cariprazine [95% credible interval (CrI) 1.04–1.73 and 1.07–1.67, respectively] to 2.17 for risperidone (95% CrI 1.38–3.42). When considering remission, cariprazine was not effective (OR 1.21, 95% CrI 0.96–1.54). For acceptability, quetiapine (OR 0.68, 95% CrI 0.50–0.91), brexpiprazole (OR 0.69, 95% CrI 0.55–0.86), and cariprazine (OR 0.61, 95% CrI 0.46–0.82) were worse than the placebo. With regards to tolerability, only olanzapine (OR 0.51, 95% CrI 0.25–1.07) and risperidone (OR 0.48, 95% CrI 0.10–2.21) showed no significant differences compared with placebo. The administration of adjunctive antipsychotics is associated with high effectiveness and low acceptability. Risperidone and aripiprazole are more efficacious and accepted than other atypical antipsychotics.

The microstructure and texture evolution of Ni-5 at%W (Ni5W) alloy substrates were investigated by in situ tensile testing along the rolling direction (RD), transverse direction (TD), and at 45° to the RD (45°-RD), as well as by electron backscatter diffraction characterization. The tensile stress direction had a significant influence on the texture evolution. The cubic texture in the Ni-5 at%W alloy exhibited severe degradation when the tensile angle was 45°-RD. In contrast, the cubic texture was relatively stable under high deformation along the RD or TD. It was found that the slip line system in the 45°-RD specimen was the key to the contrasting behavior. The effect of the tensile testing angle on the cubic texture evolution for Ni–W substrates was investigated, and the corresponding effect on the superconducting properties of coated materials was studied.

The present study investigated the association between fibre degradation and the concentration of dissolved molecular hydrogen (H2) in the rumen. Napier grass (NG) silage and corn stover (CS) silage were compared as forages with contrasting structures and degradation patterns. In the first experiment, CS silage had greater 48-h DM, neutral-detergent fibre (NDF) and acid-detergent fibre degradation, and total gas and methane (CH4) volumes, and lower 48-h H2 volume than NG silage in 48-h in vitro incubations. In the second experiment, twenty-four growing beef bulls were fed diets including 55 % (DM basis) NG or CS silages. Bulls fed the CS diet had greater DM intake (DMI), average daily gain, total-tract digestibility of OM and NDF, ruminal dissolved methane (dCH4) concentration and gene copies of protozoa, methanogens, Ruminococcus albus and R. flavefaciens, and had lower ruminal dH2 concentration, and molar proportions of valerate and isovalerate, in comparison with those fed the NG diet. There was a negative correlation between dH2 concentration and NDF digestibility in bulls fed the CS diet, and a lack of relationship between dH2 concentration and NDF digestibility with the NG diet. In summary, the fibre of CS silage was more easily degraded by rumen microorganisms than that of NG silage. Increased dCH4 concentration with the CS diet presumably led to the decreased ruminal dH2 concentration, which may be helpful for fibre degradation and growth of fibrolytic micro-organisms in the rumen.

Hydrocarbon contamination plagues high-resolution and analytical electron microscopy by depositing carbonaceous layers onto surfaces during electron irradiation, which can render carefully prepared specimens useless. Increased specimen thickness degrades resolution with beam broadening alongside loss of contrast. The large inelastic cross-section of carbon hampers accurate atomic species detection. Oxygen and water molecules pose problems of lattice damage by chemically etching the specimen during imaging. These constraints on high-resolution and spectroscopic imaging demand clean, high-vacuum microscopes with dry pumps. Here, we present an open-hardware design of a high-vacuum manifold for transmission electron microscopy (TEM) holders to mitigate hydrocarbon and residual species exposure. We quantitatively show that TEM holders are inherently dirty and introduce a range of unwanted chemical species. Overnight storage in our manifold reduces contaminants by one to two orders of magnitude and promotes two to four times faster vacuum recovery. A built-in bakeout system further reduces contaminants partial pressure to below 10−10 hPa (Torr) (approximately four orders of magnitude down from ambient storage) and alleviates monolayer adsorption during a typical TEM experiment. We determine that bakeout of TEM holder with specimen held therein is the optimal cleaning method. Our high-vacuum manifold design is published with open-source blueprints, parts, and cost list.

HIV-1 drug resistance can compromise the effectiveness of antiretroviral therapy (ART). A survey of pretreatment HIV-1 drug resistance (PDR) was conducted in Lincang Prefecture of Yunnan Province. From 372 people living with HIV/AIDS initiating ART for the first time during 2017–2018, 322 pol sequences were obtained, of which 11 HIV-1 strain types were detected. CRF08_BC (70.2%, 226/322) was the predominant strain, followed by URF strains (10.6%, 34/322). Drug resistance mutations (DRMs) were detected among 34.2% (110/322) of the participants. E138A/G/K/R (14.3%, 46/322) and V179E/D/T (13.7%, 47/322) were the predominant DRMs. Specifically, E138 mutations commonly occurred in CRF08_BC (19.9%, 45/226). Among the DRMs detected, some independently conferred resistance, such as K65R (1.6%, 5/322), Y188C/F/L (0.9%, 3/322), K103N (0.6%, 2/322) and G190A (0.3%, 1/322), which conferred high-level resistance. The prevalence of PDR was 7.5% (95% CI: 4.6–10.3%) and the prevalence of non-nucleotide reverse transcriptase inhibitor (NNRTI) resistance was 5.0% (95% CI: 2.6–7.4%), which is below the threshold (⩾10%) of initiating a public health response. In conclusion, HIV-1 genetic diversity and an overall moderate level of PDR prevalence were found in western Yunnan. PDR surveillance should be continually performed to decide whether a public health response to NNRTI resistance should be initiated.

Advanced Ni8W/Ni12W/Ni8W alloy composite substrates used in YBCO-coated conductors with a strong cube texture and high yield strength have been fabricated, and a CeO2 buffer layer film was successfully deposited on the composite substrates. Through in situ tensile testing coupled with electron backscattered diffraction (EBSD) analysis, the stability of the cube texture of Ni8W/Ni12W/Ni8W alloy composite substrates has been investigated. The stress–strain curve shows that the yield strength (at 0.2% strain) of the composite substrates exceeds 250 Mpa. The orientation of grains and boundaries on the surface of the substrates was almost unchanged, while the strain exceeds 0.2%, which indicated that the composite substrates are adequate for depositing buffer layers and YBCO layers by the reel-to-reel process.

A novel solid-clad-by-liquid method was developed to form a 10-m long by 10-mm wide by 80-μm thick Ni–5 at.% W/Ni–9.3 at.% W/Ni–5 at.% W composite tape. Three deformation routes (cold rolling, cold rolling with intermediate annealing, and cold rolling combined with warm rolling) have been investigated in short Ni–5 at.% W/Ni–9.3 at.% W/Ni–5 at.% W composite substrate. To optimize the dynamic continuous annealing parameters for the long composite substrates, air-cooled and furnace-cooled annealing procedures were compared in short Ni–5 at.% W/Ni–9.3 at.% W/Ni–5 at.% W composite substrates. Improved cube texture of 98.7% in a 10-m long by 10-mm wide by 80-μm thick Ni–5 at.% W/Ni–9.3 at.% W/Ni–5 at.% W composite substrate was achieved via warm rolling deformation at 550 °C and two-step dynamic continuous annealing (750 °C for 1 h followed by 1200 °C for 1 h). The yield strength, Curie temperature, and saturation magnetization of 176 MPa, 324 K, and 18 emu/g, respectively, were obtained.

Visual stimuli can be useful in supporting design ideation process. However, researchers still know very little about how stimuli should be delivered to designers during the early design stage. This question is crucial to the effective use of stimuli because previous researches have proved that ill-presented stimuli can have a negative impact on design creativity. Therefore, an empirical study was conducted with the aim of exploring if and how combinational pictorial stimuli can affect designers' creative performance. Results from a total of 36 participants show that the design outcomes presented by the group exposed to combinational pictorial stimuli were more creative than those given by the group exposed to no stimuli or randomly presented pictorial stimuli. These results imply that the form of stimuli delivery can affect creative design outcomes and combinational pictorial stimuli best support design creativity among these three conditions. These findings give us a better understanding of the roles that visual stimuli play in design, which is expected to bring us important implications for both design education and design support tool development

A kind of novel Ni–P gradient coating/stannate conversion film was deposited on AZ91D magnesium alloy (AZ91D alloy) by an integrative method involved stannate conversion and electroless plating. The results indicated that using sodium hypophosphite concentrations varied as 5, 10, 22, 46, and 60 g/L in the bath, the electroless Ni–P gradient coating with typical cell morphologies was successfully prepared, and the structures transited from crystalline → microcrystalline → amorphous were obtained as increasing P content from 3.31 to 12.58 wt%. Furthermore, the corrosion morphologies, polarization curves, and the electrochemical impedance spectroscopy result indicated that the corrosion resistance of AZ91D alloy substrate was significantly improved and the corrosion resistance of Ni–P gradient coating was superior than that of stannate conversion film, which might be attributed to the gradient structure and rising P content with unique function.