This paper provides an overview of the current status of ultrafast and ultra-intense lasers with peak powers exceeding 100 TW and examines the research activities in high-energy-density physics within China. Currently, 10 high-intensity lasers with powers over 100 TW are operational, and about 10 additional lasers are being constructed at various institutes and universities. These facilities operate either independently or are combined with one another, thereby offering substantial support for both Chinese and international research and development efforts in high-energy-density physics.

The knowledge of the critical periods of crop-weed competition is crucial for designing weed management strategies in cropping systems. In the Lower Yangtze Valley, China, field experiments were conducted in 2011 and 2012 to study the effect of interference from mixed natural weed populations on cotton growth and yield and determine the critical period for weed control (CPWC) in direct-seeded cotton. Two treatments were applied: allowing weeds to infest the crop or keeping plots weed-free for increasing periods (0, 1, 2, 4, 6, 8, 10, 12, 14, and 20 weeks) after crop emergence. The results showed that mixed natural weed infestations led to 35 to 55 cm shorter cotton plants with stem diameters 10 to 13 mm smaller throughout the season, fitting well with modified Gompertz and logistic models, respectively. Season-long competition with weeds reduced the number of fruit branches per plant by 65% to 82%, decreasing boll number per plant by 86% to 96% and single boll weight by approximately 24%. Weed-free seed cotton yields ranged from 2,900 to 3,130 kg ha-1, while yield loss increased with the duration of weed infestation, reaching up to 83% to 96% compared with permanent weed-free plots. Modified Gompertz and logistic models were used to analyze the impact of increasing weed control duration and weed interference on relative seed cotton yield (percentage of season-long weed-free cotton), respectively. Based on a 5% yield-loss threshold, the CPWC was found to be from 145 growing degree days (GDD) to 994 GDD, corresponding to 14 days after emergence (DAE) to 85 DAE. These findings emphasize the importance of implementing effective weed control measures from 14 DAE to 85 DAE in the Lower Yangtze Valley, China, to prevent crop losses exceeding a 5% yield-loss threshold.

Barnyardgrass [Echinochloa crus-galli (L.) P. Beauv.] is a dominant weed species occurring in rice fields across China. Metamifop, a common herbicide, is frequently applied to control E. crus-galli and other grassy weeds in rice fields. Herein, HS01, an E. crus-galli population suspected to be resistant (R) to metamifop, was collected from Hanshan County in Anhui Province. Whole-plant dose-response testing revealed that, compared with the susceptible (S) population FD03, HS01 had developed high-level resistance to metamifop with a resistance index (RI) of 11.76 and showed cross-resistance to cyhalofop-butyl (RI=9.33), fenoxaprop-P-ethyl (RI=5.80) and clethodim (RI=3.24). Gene sequencing revealed a Cys-2088-Arg mutation in ACCase 1,5 allele of all the R plants, while ACCase gene overexpression was not involved in the resistance. Molecular docking indicated that the less negative binding energies might be the main reason for the resistance of HS01 to ACCase-inhibiting herbicides. A derived cleaved amplified polymorphic sequence (dCAPS) method was developed for the rapid identification of the Cys-to-Arg mutation in the ACCase gene at codon position 2088 in E. crus-galli. Additionally, pretreatment with the cytochrome P450 inhibitor piperonyl butoxide or the glutathione S-transferase inhibitor 4-chloro-7-nitrobenzoxa-diazole had no significant effects (p> 0.05) on the resistance of HS01 to metamifop. To our knowledge, this is the first report of a Cys-2088-Arg mutation in E. crus-galli ACCase that confers cross-resistance to ACCase-inhibiting herbicides.

Compacted bentonite, used as an engineering barrier for permanent containment of high-level radioactive waste, is susceptible to mineral evolution resulting in compromise of the expected barrier performance due to alkaline–thermal chemical interaction in the near-field. To elucidate the mineral-evolution mechanisms within bentonite and the transformation of the nuclide adsorption properties during that period, experimental evolution of bentonite was conducted in a NaOH solution with a pH of 14 at temperatures ranging from 60 to 120°C. The results showed that temperature significantly affects the stability of minerals in bentonite under alkali conditions. The dissolution rate of fine-grained cristobalite in bentonite exceeds that of smectite, with the phase-transition products of smectite being temperature-dependent. As the temperature rises, smectite experiences a three-stage transformation: initially, at 60°C, the lattice structure thins due to the collapse of the octahedral sheets; at 80°C, the lattice disintegrates and reorganizes into a loose framework akin to albite; and by 100°C, it further reorganizes into a denser framework resembling analcime. The adsorption properties of bentonite exhibit a peak inflection point at 80°C, where the dissolution of the smectite lattice eliminates interlayer pores and exposes numerous polar or negatively charged sites which results in a decrease in specific surface area and an increase in cation exchange capacity and adsorption capacity of Eu3+. This research provides insights into the intricate evolution of bentonite minerals and the associated changes in radionuclide adsorption capacity, contributing to a better understanding of the stability of bentonite barriers and the effective long-term containment of nuclear waste.

Digitaria ciliaris var. chrysoblephara (Fig. & De Not.) R.R. Stewart is an annual xeromorphic weed that severely infests direct-seeded rice fields in China. Herbicide resistance is emerging in D. ciliaris var. chrysoblephara owing to extensive and recurrent use of the acetyl-CoA carboxylase (ACCase)-inhibiting herbicide metamifop. In this study, a total of 53 D. ciliaris var. chrysoblephara populations randomly sampled from direct-seeded rice fields across Jiangsu Province were investigated for metamifop resistance and potential resistance-endowing mutations. Single-dose assays revealed that 17 (32.1%) populations evolved resistance to metamifop and 5 (9.4%) populations were in the process of developing resistance. The resistance index (RI) of metamifop-resistant populations ranged from 2.7 to 32.1. Amino acid substitutions (Ile-1781-Leu, Trp-2027-Cys/Ser, and Ile-2041-Asn) in ACCase genes were detected in resistant D. ciliaris var. chrysoblephara plants and caused various cross-resistance patterns to ACCase-inhibiting herbicides. All of four resistant populations (YC07, YZ09, SQ03, and HA06), with different ACCase mutations, exhibited cross-resistance to the aryloxyphenoxypropionate (APP) herbicides cyhalofop-butyl (RI values: 10.0 to 19.9), fenoxaprop-P-ethyl (RI values: 53.7 to 132.8), and haloxyfop-P-methyl (RI values: 6.2 to 62.6), and the phenylpyrazoline (DEN) pinoxaden (RI values: 2.3 to 5.4), but responded differently to the cyclohexanedione (CHD) herbicides clethodim and sethoxydim. It is noteworthy that four postemergence herbicides used for rice cropping, including bispyribac-sodium, pyraclonil, quinclorac, and anilofos, showed poor control effect against D. ciliaris var. chrysoblephara, suggesting few alternations for managing this weed in rice fields except ACCase inhibitors. In conclusion, this work demonstrated that the D. ciliaris var. chrysoblephara had developed resistance to ACCase-inhibiting herbicides in rice cultivation of China, and target-site amino acid substitutions in ACCase were primarily responsible for metamifop resistance.

The iron-rich calcareous soil (Typic Rhodustalf) from the Penghu island group represents a volcanic area. The black soils (Typic Haplustert, Vertic Endoaquoll, Typic Hapludolls) are typical of eastern Taiwan. Four A horizons and a pedon from the iron-rich calcareous soil and four pedons from the black soils were studied to analyze soil properties and clay compositions. The objective was to compare the properties of smectites developed from different parent materials. The materials were studied by using conventional X-ray diffraction (XRD) of K- and Mg-saturated clays and involved the alkylam-monium (C = 12) method and the Greene-Kelly test. The mean-layer charge of smectites (0.48–0.52 cmol(c)/O10(OH)2) in the iron-rich calcareous soil was found to be higher than the black soils (0.43–0.48 cmol(c)/O10(OH)2). A smectite of higher charge developed from the basalts. This smectite is enriched in Fe and Mg, and lacks Si, thereby forming beidellite and/or nontronite. In contrast, under high precipitation, elevated temperature, base saturation (e.g., Na, K, Ca, Mg), and about equal wet and dry cycles per year in the black soil environments, smectites developed from the complicated geologic site of eastern Taiwan. These smectites transformed to smectite-kaolinite mixed-layer clay and thus, resulted in lower-charge smectites. The K fixation capacity of the iron-rich calcareous soil was higher than the black soils.

Clay mineral compositions from 2 paleosol profiles (Chu-Wan, CW, and Shiao-Men Yu, SMY, profiles) on the late-Miocene sediments in Penghu Islands (Pescadores), Taiwan, are characterized by random X-ray powder diffraction (XRD) and transmission electron microscopy (TEM). By the clay assemblage of the paleosol profile, we want to explore the probable formation mode of the Penghu paleosols.

The paleosol profiles in study are overlain by a layer of basalt flow. However, the clay mineralogy of the 2 paleosols was not altered metasomatically after burial. Results show that 3 distinctive zones of different dominating kaolin-group minerals are apparent in the profiles. In descending order, they are: 1) spheroidal, hollow 7Å-halloysite, 2) platy, irregular-shaped and disordered kaolinite, and 3) platy, irregular-shaped, disordered kaolinite. The relative crystallinity of kaolin minerals of the 3 layers is: layer 2 > layer 3 > layer 1. On the basis of the XRD, TEM analyses and the crystallinity calculations, the distribution of kaolin in Penghu paleosol profiles appears to be unique. Penghu paleosol profiles show systematic change in kaolin crystallinity and polymorphs with depth. Because the clay type is heterogeneous within the profile, this represents that Penghu paleosol profiles were polypedogenic.

The contact between the upper basalt and the paleosol is the erosion surface, so we do not know exactly what the thickness of the original paleosol was. The first layer (about 20 cm) of the profiles appears to be constituents of the original paleosol. It contains high contents of pedogenic (in situ weathering) hematites and 7Å-halloysites, which implies that the local climate of the Penghu Islands at late Miocene was warm and humid. Intense leaching and dry/wet cycle should be the reason for high contents of halloysite (>60%) in the Penghu paleosols. Laterization was the probable pedogenic process for the formation of the paleosols.

Based on 30 high-resolution U-Th dating controls, we reconstruct stalagmite δ18O records from 45 to 15 thousand years ago (ka B.P., before AD 1950) from the Shizhu Cave, which is located in southwestern China under the influence of both the Indian Summer Monsoon (ISM) and the East Asian Summer Monsoon (EASM). By integrating with the other stalagmite δ18O records in Asia during the middle to late last glacial, our results reveal two main moisture trajectories: one from the Indian Ocean, through the Shizhu Cave towards central China, and the other from the Pacific Ocean to central and northern China. The systematic decrease of the average values of stalagmite δ18O records from oceans to inland China reveals a spatial pattern of water vapour fractionation and moisture trajectory during the middle to late last glacial. In contrast, the variation amplitude, which is defined as the departures apart from the background δ18O records during Heinrich stadials 1 to 4 (HS1–HS4), show an increasing trend from the coastal oceans to mid-latitude inland China, presenting a ‘coastal-inland’ pattern, which can be interpreted by the enhanced East Asian Winter Monsoon (EAWM) and the weakened EASM. More specifically, the enriched stalagmite δ18O records in the EASM region during HS1 to HS4 are caused by the decreased summer rainfall amount or/and the increased proportion of summer moisture resources from the Pacific Ocean. These new observations deepen our understanding of the complicated stalagmite δ18O records in the EASM region.

L-aspartic acid was intercalated into layered double hydroxides by coprecipitation. Two types of well crystallized material were obtained and were characterized by powder X-ray diffraction, Fourier transform infrared spectroscopy, thermogravimetry, differential thermal analysis and polarimetry. Schematic models of two intercalation structures with different basal spacings are given. It is proved that the optical activity of L-aspartic acid is retained during and after the intercalation process.

The controlled chemical oxidative polymerization of metanilic anion $(m{\text{-NH}}_2{\text{C}}_6{\text{H}}_4{\text{SO}}_3^{-})$$(m{\rm{ - N}}{{\rm{H}}_2}{{\rm{C}}_6}{{\rm{H}}_4}{\rm{SO}}_3^ - )$ within the interlayer of NiAl layered double hydroxide was performed using, for the first time, ammonium persulfate as the oxidizing agent. The quantity of oxidizing agent required for control of the interlayer polymerization was investigated systematically and it was found that interleaved polyaniline sulfonic (PANIS) was present in different oxidation states and protonation levels when different quantities of external oxidizing agents were added. A mechanism for the oxidative polymerization of metanilic anion in NiAl layered double hydroxide is proposed, based on the intercalation of the oxidizing agent and the interlayer polymerization of monomer. The resulting PANIS/NiAl LDH composites were characterized by powder X-ray diffraction, ultraviolet-visible absorption spectra, Fourier transform infrared and X-ray photoelectron spectroscopy.

Hydrophobicity, swellability, and dispersion are important properties for organo-montmorillonites (OMnt) and have yet to be fully characterized for all OMnt configurations. The purpose of the present work was to examine the preparation of OMnt from the reaction of Ca2+-montmorillonite (Ca2+-Mnt) with a high concentration of surfactant and to reveal the relevant properties of hydrophobicity and dispersion of the resultant OMnt. A series of OMnt samples were prepared using a small amount of water and cetyltrimethylammonium bromide (CTAB) with a concentration more than the CTAB critical micelle concentration (CMC). The relationship between OMnt microstructure and the hydrophobicity and swellability properties was investigated in detail. The resulting OMnt samples were characterized using powder X-ray diffraction patterns (XRD), Fourier-transform infrared (FTIR) spectroscopy, thermogravimetric and differential thermogravimetry (TG-DTG), water contact angle tests, swelling indices, and transmission electron microscopy (TEM). The addition of CTAB and water in the OMnt preparation affected the OMnt microstructure and properties. An increase in CTAB concentration led to a more ordered arrangement of cetyltrimethylammonium (CTA+) cations in the interlayer space of the OMnt and a large amount of CTA+ cations on the outer surfaces of the OMnt. The swelling indices and the water contact angles of OMnt samples depended on the distribution of the CTAB surfactant on OMnt and the orientation of the surfactant hydrophilic groups on the inner and on the outer surfaces of OMnt. A maximum swelling index of 39 mL/g in xylene was achieved with an average water contact angle of 62.0° ± 2.0° when the amount of CTAB added was 2 times the cation exchange capacity (CEC) of Mnt and the lowest water to dry Mnt mass ratio was 3 during the preparation of OMnt samples. The platelets of OMnt aggregated together in xylene by electrostatic attraction and by hydrophobic interactions.

Organo-montmorillonite (OMnt) has wide applications in paints, clay-polymer nanocomposites, biomaterials, etc. In most cases, the dispersibility and swellability of OMnt dictate the performance of OMnt in the target products. Previous studies have revealed that the properties can be improved when multiple organic species are co-introduced into the interlayer space of montmorillonite (Mnt). In the present study, single surfactant erucylamide (EA), dual-surfactants cetyltrimethyl ammonium bromide (CTAB) and octadecyltrimethyl ammonium chloride (OTAC), and ternary-surfactants EA, CTAB, and OTAC were co-introduced into Mnt by solution intercalation. The resulting OMnts were characterized by powder X-ray diffraction (XRD), Fourier-transform infrared (FTIR) spectroscopy, thermogravimetry-differential thermogravimetry (TG-DTG), water contact-angle tests, scanning electronic microscopy (SEM), laser particle-size analysis, and swelling indices. Mnt co-modified by ternary CTAB, OTAC, and EA led to a large d001 value (4.20 nm), surface hydrophobicity with a contact angle of 95.6°, swellability (50 mL/g) with small average particle sizes (2.1−2.8 μm) in xylene, and >99% of the OMnt particles were kept as <5 μm in deionized water. The formation of EA-modified-Mnt was proposed according to hydrophobic affinity, hydrogen bonding, and van der Waals forces. The nanoplatelets of the CTA+, OTA+, and EA co-modified OMnts in xylene were assembled into a house-of-cards structure by face-to-edge and edge-to-edge associations. The electrostatic attractions, electrostatic and steric repulsions, and hydrophobic interactions were responsible for the good dispersibility of OMnt in xylene. The ternary surfactant co-modified OMnt with high dispersion and swellability will make OMnt better suited for real-world applications.

Given a Borel probability measure µ on $\mathbb{R}^n$ and a real matrix $R\in M_n(\mathbb{R})$. We call R a spectral eigenmatrix of the measure µ if there exists a countable set $\Lambda\subset \mathbb{R}^n$ such that the sets $E_\Lambda=\big\{{\rm e}^{2\pi i \langle\lambda,x\rangle}:\lambda\in \Lambda\big\}$ and $E_{R\Lambda}=\big\{{\rm e}^{2\pi i \langle R\lambda,x\rangle}:\lambda\in \Lambda\big\}$ are both orthonormal bases for the Hilbert space $L^2(\mu)$. In this paper, we study the structure of spectral eigenmatrix of the planar self-affine measure $\mu_{M,D}$ generated by an expanding integer matrix $M\in M_2(2\mathbb{Z})$ and the four-elements digit set $D = \{(0,0)^t,(1,0)^t,(0,1)^t,(-1,-1)^t\}$. Some sufficient and/or necessary conditions for R to be a spectral eigenmatrix of $\mu_{M,D}$ are given.

The advent of immersive and interactive technologies has facilitated the growth of the museum and gallery sector by offering a variety of new experiences. In the UK and China, in particular, the museum and gallery sector lies at the heart of the creative industries and makes a significant contribution to cultural growth. Both countries have recognised the impact of such technologies on the growth of the sector and have actively sought opportunities to use them for bilateral collaboration. However, the interest in immersive and interactive technologies among museum and gallery audiences remains underexplored, as do their preferences and behavioural patterns with respect to such technologies. This study discusses the key findings of user research, exploring the awareness, experiences and preferences of current museum and gallery audiences regarding (i) immersive and interactive museum and gallery experiences and (ii) the cultural exchange between the UK and China.

Objectives: In response to the COVID-19 pandemic, primary care swiftly transformed and re-established patient flow in clinics to red, orange, and green zones based on a set of screening criteria. To further manage the influx of suspected COVID-19 patients and their needs safely, a list of surveillance audit criteria was developed to ensure good infection control standards. Methods: The infection control team prepared the surveillance audit criteria based on recommended CDC/WHO guidelines for pandemic preparedness. These criteria were contextualized to the primary-care polyclinic setting. The surveillance audit criteria were grouped according to their category: screening, triage, early recognition and source control, inventory management of personal protective equipment (PPE), infection control measures in the red zone, precautionary measures during collection of nasopharyngeal swabs and environmental cleaning and disinfection for premises in the red, orange, and green zones, respectively. The infection control liaison nurses in each polyclinic were trained to use the checklist to ensure consistency in interpretation of the criteria. Results: Surveillance audits were conducted biweekly in the first 3 months then monthly once the compliance rate was steady at 90%–100% for all categories. The overall average compliance rate since commencing in March 2020 for all polyclinics was sustained at 90%–100%. Common findings included inappropriate use of PPE (eg, self-contamination during removal of gown or wrong sequence of doffing), inadequate ventilation, and inadequate cleaning processes. All findings were corrected immediately, and staff education was provided. Conclusions: Primary care plays an important role during a pandemic. It is essential that both patients and healthcare workers in the primary care setting are protected from infection risk during a pandemic. Having a good surveillance audit process helps ensure that primary care services can continue for the general population. Surveillance is an essential component of the health system’s response to a pandemic.

Angiostrongylus cantonensis causes a form of parasitic meningitis in humans. Albendazole (ABZ) kills nematode larvae in the brain. However, dead larvae can trigger a severe inflammatory response, resulting in brain damage. Accumulating evidence suggests that calycosin represents a potential anti-inflammatory therapeutic candidate. In this study, we investigated the combined effects of ABZ and calycosin in angiostrongyliasis caused by A. cantonensis in BALB/c mice. Inflammatory mediators (such as phospho-nuclear factor-κB, cyclooxygenase-2, matrix metalloproteinase-9, tumour necrosis factor-α and interleukin-1β) are associated with the development of meningitis and immune inflammatory reactions. We found that A. cantonensis significantly induces inflammatory mediator production and increases the blood–brain barrier (BBB) permeability. However, co-administration of both ABZ and calycosin markedly suppressed meningitis and inflammatory mediator production and decreased the BBB permeability compared to treatment with a single drug. Furthermore, calycosin and ABZ plus calycosin treatment facilitated production of the antioxidant haem oxygenase-1 (HO-1). Moreover, co-therapy with ABZ and calycosin failed to mitigate angiostrongyliasis in the presence of tin-protoporphyrin IX, an HO-1-specific inhibitor. This finding suggests that the beneficial effects of ABZ plus calycosin treatment on the regulation of inflammation are mediated by the modulation of HO-1 activation. The present results provide new insights into the treatment of human angiostrongyliasis using co-therapy with ABZ and calycosin.

An experimental investigation of the stereocamera's systematic error is carried out to optimize three-dimensional (3-D) dust observation on the HL-2A tokamak. It is found that a larger 3-D region occupied by all calibration points is able to reduce the 3-D reconstruction systematic error of the stereocamera. In addition, the 3-D reconstruction is the most accurate around the region where the calibration points are located. Based on these experimental results, the design of the stereocamera on the HL-2A tokamak is presented, and a set of practical procedures to optimize the 3-D reconstruction accuracy of the stereocamera are proposed.

Pregnancy is a complex biological process. The establishment and maintenance of foetal–maternal interface are pivotal events. Decidual immune cells and inflammatory cytokines play indispensable roles in the foetal–maternal interface. The disfunction of decidual immune cells leads to adverse pregnancy outcome. Tumour necrosis factor (TNF)-α, a common inflammatory cytokine, has critical roles in different stages of normal pregnancy process. However, the relationship between the disorder of TNF-α and adverse pregnancy outcomes, including preeclampsia (PE), intrauterine growth restriction (IUGR), spontaneous abortion (SA), preterm birth and so on, is still indefinite. In this review, we thoroughly reviewed the effect of TNF-α disorder on pathological conditions. Moreover, we summarized the reports about the adverse pregnancy outcomes (PE, IUGR, SA and preterm birth) of using anti-TNF-α drugs (infliximab, etanercept and adalimumab, certolizumab and golimumab) currently in the clinical studies. Overall, IUGR, SA and preterm birth are the most common adverse pregnancy outcomes of anti-TNF-α drugs. Our review may provide insight for the immunological treatment of pregnancy-related complication, and help practitioners make informed decisions based on the current evidences.

This paper investigates the monolithic edge-cladding process for the elliptical disk of N31-type Nd-doped phosphate laser glass, which will be utilized under liquid cooling conditions for high-power laser systems. The thermal stress, interface bubbles and residual reflectivity, which are due to high-temperature casting and bonding during the monolithic edge-cladding process, are simulated and determined. The applied mould is optimized to a rectangular cavity mould, and the casting temperature is optimized to 1000°C. The resulting lower bubble density makes the mean residual reflectivity as low as 6.75 × 10−5, which is enough to suppress the amplified spontaneous emission generated in the Nd-glass disk, and the resulting maximum optical retardation is converged to 10.2–13.3 nm/cm, which is a favourable base for fine annealing to achieve the stress specification of less than or equal to 5 nm/cm. After fine annealing at the optimized 520°C, the maximum optical retardation is as low as 4.8 nm/cm, and the minimum transmitted wavefront peak-to-valley value is 0.222 wavelength (632.8 nm). An N31 elliptical disk with the size of 194 mm × 102 mm × 40 mm can be successfully cladded by the optimized monolithic edge-cladding process, whose edge-cladded disk with the size of 200 mm × 108 mm × 40 mm can achieve laser gain one-third higher than that of an N21-type disk of the same size.