This study investigates the spatial distribution of inertial particles in turbulent Taylor–Couette flow. Direct numerical simulations are performed using a one-way coupled Eulerian–Lagrangian approach, with a fixed inner-wall Reynolds number of 2500 for the carrier flow, while the particle Stokes number ($St$) varies from 0.034 to 1 for the dispersed phase. We first examine the issue of preferential concentration of particles near the outer-wall region. Employing two-dimensional Voronoï analysis, we observe a pronounced particle clustering with increasing $St$, particularly evident in regions of low fluid velocity. Additionally, we investigate the concentration balance equation, inspired by the work of Johnson et al. (J. Fluid Mech., vol. 883, 2020, A27), to examine the particle radial distribution. We discern the predominant sources of influence, namely biased sampling, turbophoresis and centrifugal effects. Across all cases, centrifugal force emerges as the primary driver, causing particle migration toward the outer wall. Biased sampling predominantly affects smaller inertial particles, driving them toward the inner wall due to sampling within Taylor rolls with inward radial velocity. Conversely, turbophoresis primarily impacts larger inertial particles, inducing migration towards both walls where turbulent intensity is weaker compared with the bulk. With the revealed physics, our work provides a basis for predicting and controlling particle movement and distribution in industrial applications.

This study conducts a numerical investigation into the three-dimensional film boiling of liquid under the influence of external magnetic fields. The numerical method incorporates a sharp phase-change model based on the volume-of-fluid approach to track the liquid–vapour interface. Additionally, a consistent and conservative scheme is employed to calculate the induced current densities and electromagnetic forces. We investigate the magnetohydrodynamic effects on film boiling, particularly examining the pattern transition of the vapour bubble and the evolution of heat transfer characteristics, exposed to either a vertical or horizontal magnetic field. In single-mode scenarios, film boiling under a vertical magnetic field displays an isotropic flow structure, forming a columnar vapour jet at higher magnetic field intensities. In contrast, horizontal magnetic fields result in anisotropic flow, creating a two-dimensional vapour sheet as the magnetic strength increases. In multi-mode scenarios, the patterns observed in single-mode film boiling persist, with the interaction of vapour bubbles introducing additional complexity to the magnetohydrodynamic flow. More importantly, our comprehensive analysis reveals how and why distinct boiling effects are generated by various orientations of magnetic fields, which induce directional electromagnetic forces to suppress flow vortices within the cross-sectional plane.

Artificial sweeteners are generally used and recommended to alternate added sugar for health promotion. However, the health effects of artificial sweeteners remain unclear. In this study, we included 6371 participants from the National Health and Nutrition Examination Survey with artificial sweetener intake records. Logistic regression and Cox regression were applied to explore the associations between artificial sweeteners and risks of cardiometabolic disorders and mortality. Mendelian randomisation was performed to verify the causal associations. We observed that participants with higher consumption of artificial sweeteners were more likely to be female and older and have above medium socio-economic status. After multivariable adjustment, frequent consumers presented the OR (95 % CI) for hypertension (1·52 (1·29, 1·80)), hypercholesterolaemia (1·28 (1·10, 1·50)), diabetes (3·74 (3·06, 4·57)), obesity (1·52 (1·29, 1·80)), congestive heart failure (1·89 (1·35, 2·62)) and heart attack (1·51 (1·10, 2·04)). Mendelian randomisation confirmed the increased risks of hypertension and type 2 diabetes. Moreover, an increased risk of diabetic mortality was identified in participants who had artificial sweeteners ≥ 1 daily (HR = 2·62 (1·46, 4·69), P = 0·001). Higher consumption of artificial sweeteners is associated with increased risks of cardiometabolic disorders and diabetic mortality. These results suggest that using artificial sweeteners as sugar substitutes may not be beneficial.

An ultrasonic phased array system is introduced to study the three-dimensional (3-D) movement of a single bubble in a GaInSn alloy under a transverse magnetic field (MF), which is verified by bubble experiments in water. The 3-D motion trajectories of individual bubbles in the GaInSn are obtained under a horizontal MF. As the MF becomes stronger, the bubble successively oscillates in random directions (R mode), a direction perpendicular to the MF (V mode), a direction parallel to the MF (P mode) and finally it rises straight (S mode). The significant anisotropy of the oscillation directions at a moderate MF intensity may be due to the anisotropy of the vortex structure around the bubble. Furthermore, the oscillation amplitude gradually declines with increasing MF intensity until the bubble trajectory finally becomes a straight line. Our measurements allow us to specify the characteristic regions for the observed bubble modes in the $N-Eo-Re$ parameter space (N is the magnetic interaction parameter, Eo is the Eötvös number and Re is the Reynolds number). In addition, more detailed characteristics of bubble terminal velocity are revealed, showing that the bubble velocities are closely related to the motion modes. The increase in bubble velocity at a moderate MF intensity is caused by the weakening oscillation. At a high strength, the MF monotonically suppresses the rise velocity of the bubble with a fixed scaling law.

The production and industrial use of asbestos cement and other asbestos-containing materials have been restricted in most countries because of the potential detrimental effects on human health and the environment. Chrysotile is the most common form of asbestos and investigations into how to recycle this serpentine phyllosilicate mineral have attracted extensive attention. Chrysotile asbestos tailings can be transformed thermally, at high temperature, by in situ carbothermal reduction (CR). The CR method aims to maximize use of the chrysotile available and uses high temperatures and carbon to change the mineral form and structure of the chrysotile asbestos tailings. When chrysotile asbestos is employed as the raw material and coke (carbon) powder is used as the reducing agent for CR transformation, stable, high-temperature composites consisting of forsterite, stishovite, and silicon carbide are formed. Forsterite (Mg2SiO4) was the most abundant crystalline phase formed in samples heat treated below 1500ºC. At 1600ºC, forsterite was exhausted through decomposition and β-SiC formed by reduction of stishovite. A larger proportion of β-SiC was generated as the carbon content was increased. This research revealed that both temperature and carbon addition play key roles in the transformation of chrysotile asbestos tailings.

Electro-osmotic chemical treatment is an innovative method to improve the strength of soft clays for geotechnical engineering purposes; the effectiveness of the treatment may be related to treatment time, the concentration of the solutions injected, and to variation of pH in the clay. The objective of this study was to investigate the relationship between the above-mentioned factors and the improvement in strength when calcium chloride solution was used as an injection material. A series of tests was carried out by injecting different concentrations of calcium chloride solution into a kaolin suspension, for different treatment times, during electro-osmosis. After the tests, the pH, cone resistance, water content, and concentration of Ca2+ in the kaolin at different locations were measured and analyzed. The results show that the concentration of Ca2+ in the kaolin, the pH, and the strength were increased near the cathode with increases in concentration of CaCl2 and treatment time. An insignificant increase in strength, due to ion exchange over the entire specimen, for short treatment times of 2 to 24 h, was observed because of a small increase in concentration of Ca2+ and in pH. During long-term treatment (120 h), a considerable increase in concentration of Ca2+ (137.0 mg/g) and pH (pH = 10) was observed near the cathode. This led to a pozzolanic reaction, which in turn caused a significant increase in the mechanical strength of the kaolin.

The flying wing is an aerodynamic configuration with high efficiency, but the lack of lateral-directional stability has always been an obstacle that limits its application. In this study, the wing rock motion of a 65° swept flying-wing aircraft is studied via wind tunnel experiments and numerical simulations at a low speed, and various unsteady motion phenomena are focused on. Both the experimental and numerical results show that the flying wing has a bicyclic ${C_l}$–$\phi $ hysteresis loop during its wing rock, different from the slender delta wing, rectangular wing, generic aircraft configuration, etc., which have a tricyclic hysteresis loop. This form of hysteresis loop implies a different energy exchange manner of the flying wing in the wing rock oscillation. Further analysis shows that the flying wing forms a unilateral leading-edge vortex (LEV) under a high roll angle, with its wing rock oscillation driven by the ‘vortex–shear-layer’ structure, which is different from that of slender and non-slender delta wings. Moreover, the quantitative dynamic hysteresis characteristics of the LEV's strength and location for the flying wing and the slender delta wing are also different. These results have proven the existence of a wing rock mode which is different from previous investigations, which enriches the understanding of self-induced oscillation. Present discoveries are also conducive to the aerodynamic shape design and flight manipulation of a flying-wing aircraft, which is significant for its wider application.

Breast cancer is a high-risk disease with a high mortality rate among women. Chemotherapy plays an important role in the treatment of breast cancer. However, chemotherapy eventually results in tumours that are resistant to drugs. In recent years, many studies have revealed that the activation of Wnt/β-catenin signalling is crucial for the emergence and growth of breast tumours as well as the development of drug resistance. Additionally, drugs that target this pathway can reverse drug resistance in breast cancer therapy. Traditional Chinese medicine has the properties of multi-target and tenderness. Therefore, integrating traditional Chinese medicine and modern medicine into chemotherapy provides a new strategy for reversing the drug resistance of breast tumours. This paper mainly reviews the possible mechanism of Wnt/β-catenin in promoting the process of breast tumour drug resistance, and the progress of alkaloids extracted from traditional Chinese medicine in the targeting of this pathway in order to reverse the drug resistance of breast cancer.

The Palaeo-Mesozoic geodynamic evolution of the Tangjia–Sumdo accretionary complex belt, which separates the North and South Lhasa Terrane, remains controversial. Moreover, the lack of geological records restricts the understanding of the evolution of the Sumdo Palaeo-Tethys Ocean from the middle Permian until the middle Triassic. Here we present zircon U–Pb geochronology, whole-rock geochemistry and Sr–Nd–Hf isotopic compositions of the Yeqing gabbro. Zircon U–Pb geochronology yields ages from 254 ± 1 to 249 ± 1 Ma. In situ Hf isotopic analyses yield ϵ Hf(t) values of −0.2 to +6.3. These samples have high TiO2 (3.69 wt %) and P2O5 (0.78 wt %) contents, with typical patterns like ocean island basalt (OIB). Besides, they are classified as high-Nb basalts (HNBs) based on the high content of Nb (45.3–113.5 ppm). Whole-rock Sr–Nd isotopic compositions are similar to OIB, with initial 87Sr/86Sr of 0.7047–0.7054, 143Nd/144Nd of 0.512526–0.512647 and ϵ Nd(t) of 0.3–2.7. These signatures suggest that the Yeqing gabbro is mainly derived from low-degree melting of the garnet lherzolite mantle. Based on field observations of HNBs intruding into the continental margin and their geochemical characteristics, we infer that the Yeqing gabbro was generated in a subduction environment. Combined with the regional geology of the subduction environment and the evolution of oceanic islands in the Sumdo Palaeo-Tethys Ocean, we propose that the Yeqing gabbro may represent a product of the asthenosphere upwelling through a slab window produced by subduction of seismic ridge in the Sumdo Palaeo-Tethys Ocean, called plume – subduction-zone interaction, during the late Permian to early Triassic.

This 62-d research aimed to evaluate the effects of dietary lysine levels (DLL) and salinity on growth performance and nutrition metabolism of genetically improved farmed tilapia (GIFT) juveniles (Oreochromis niloticus). Six diets with lysine supplementation (1·34, 1·70, 2·03, 2·41, 2·72 and 3·04 % of DM) were formulated under different cultured salinities in a two-factorial design. The results indicated that supplemental lysine improved the specific growth rate (SGR) and weight gain (WG) and decreased the feed conversion ratio (FCR). Meanwhile, the fish had higher SGR and WG and lower FCR at 8 ‰ salinity. Except for moisture, the whole-body protein, lipid and ash content of GIFT were increased by 8 ‰ salinity, which showed that DLL (1·34 %) increased the whole-body fat content and DLL (2·41 %) increased whole-body protein content. Appropriate DLL up-regulated mRNA levels of protein metabolism-related genes such as target of rapamycin, 4EBP-1 and S6 kinase 1. However, 0 ‰ salinity reduced these protein metabolism-related genes mRNA levels, while proper DLL could improve glycolysis and gluconeogenesis mRNA levels but decrease lipogenesis-related genes mRNA levels in liver. 0 ‰ salinity improved GLUT2, glucokinase and G6 Pase mRNA levels; however, sterol regulatory element-binding protein 1 and fatty acid synthase mRNA levels were higher at 8 ‰ salinity. Moreover, 8 ‰ salinity also increased plasma total protein and cholesterol levels and decreased glucose levels. These results indicated that the recommended range of lysine requirement under different salinity was 2·03–2·20 % (0 ‰) and 2·20–2·41 % (8 ‰) and 8 ‰ salinity resulted in higher lysine requirements due to changes in the related nutrient metabolism, which might provide useful information for designing more effective feed formulations for GIFT cultured in different salinity environment.

Low molecular weight glutenin subunits (LWM-GSs) play a crucial role in determining wheat flour processing quality. In this work, 35 novel LMW-GS genes (32 active and three pseudogenes) from three Aegilops umbellulata (2n = 2x = 14, UU) accessions were amplified by allelic-specific PCR. We found that all LMW-GS genes had the same primary structure shared by other known LMW-GSs. Thirty-two active genes encode 31 typical LMW-m-type subunits. The MZ424050 possessed nine cysteine residues with an extra cysteine residue located in the last amino acid residue of the conserved C-terminal III, which could benefit the formation of larger glutenin polymers, and therefore may have positive effects on dough properties. We have found extensive variations which were mainly resulted from single-nucleotide polymorphisms (SNPs) and insertions and deletions (InDels) among the LMW-GS genes in Ae. umbellulata. Our results demonstrated that Ae. umbellulata is an important source of LMW-GS variants and the potential value of the novel LMW-GS alleles for wheat quality improvement.

Nutritional Risk Screening index is a standard tool to assess nutritional risk, but epidemiological data are scarce on controlling nutritional status (CONUT) as a prognostic marker in acute haemorrhagic stroke (AHS). We aimed to explore whether the CONUT may predict a 3-month functional outcome in AHS. In total, 349 Chinese patients with incident AHS were consecutively recruited, and their malnutrition risks were determined using a high CONUT score of ≥ 2. The cohort patients were divided into high-CONUT (≥ 2) and low-CONUT (< 2) groups, and primary outcomes were a poor functional prognosis defined as the modified Rankin Scale (mRS) score of ≥ 3 at post-discharge for 3 months. Odds ratios (OR) with 95 % confidence intervals (CI) for the poor functional prognosis at post-discharge were estimated by using a logistic analysis with additional adjustments for unbalanced variables between the high-CONUT and low-CONUT groups. A total of 328 patients (60·38 ± 12·83 years; 66·77 % male) completed the mRS assessment at post-discharge for 3 months, with 172 patients at malnutrition risk at admission and 104 patients with a poor prognosis. The levels of total cholesterol and total lymphocyte counts were significantly lower in high-CONUT patients than low-CONUT patients (P = 0·012 and < 0·001, respectively). At 3-month post discharge, there was a greater risk for the poor outcome in the high-CONUT compared with the low-CONUT patients at admission (OR: 2·32, 95 % CI: 1·28, 4·17). High-CONUT scores independently predict a 3-month poor prognosis in AHS, which helps to identify those who need additional nutritional managements.

We report an experimental study of the Prandtl-number effects in quasi-two-dimensional (quasi-2-D) Rayleigh–Bénard convection. The experiments were conducted in four rectangular convection cells over the Prandtl-number range of $11.7 \leqslant Pr \leqslant 650.7$ and over the Rayleigh-number range of $6.0\times 10^8 \leqslant Ra \leqslant 3.0\times 10^{10}$. Flow visualization reveals that, as $Pr$ increases from 11.7 to 145.7, thermal plumes pass through the central region much less frequently and their self-organized large-scale motion is more confined along the periphery of the convection cell. The large-scale flow is found to break down for higher $Pr$, resulting in a regime transition in the Reynolds number $Re$. For the $Pr$ range with a large-scale flow of system size, the $Re$ number, Nusselt number $Nu$ and local temperature fluctuations were investigated systematically. It is found that $Re$ scales as $Re \sim Ra^{0.58}Pr^{-0.82}$ in the present geometry, which suggests that it is in line with the behaviour in the 2-D configuration. On the other hand, the measured $Nu(Ra, Pr)$ relation $Nu \sim Ra^{0.289}Pr^{-0.02}$ tends to be compatible with the finding in a three-dimensional (3-D) system. For the temperature fluctuations in the cell centre and near the sidewall, they exhibit distinct $Ra$-dependent scalings that could not be accounted for with existing theories, but their $Pr$ dependences for $Pr \lesssim 50$ are in agreement with the predictions by Grossmann & Lohse (Phys. Fluids, vol. 16, 2004, pp. 4462–4472). These results enrich our understanding of quasi-2-D thermal convection, and its similarities and differences compared to 2-D and 3-D systems.

Post-procedural right ventricular pseudoaneurysm is a rare but life-threatening complication of interventional catheterisation. We describe a 3-day-old newborn who underwent transcatheter intervention for pulmonary atresia with a complication of right ventricular pseudoaneurysms, and transcatheter embolisation of the pseudoaneurysms was performed at 3-week-old. It is the first described case that receives transcatheter closure of right ventricular pseudoaneurysms in a newborn with a favourable outcome.

We have proposed and experimentally demonstrated a novel scheme for efficient mid-infrared difference-frequency generation based on passively synchronized fiber lasers. The adoption of coincident seeding pulses in the nonlinear conversion process could substantially lower the pumping threshold for mid-infrared parametric emission. Consequently, a picosecond mid-infrared source at 3.1 μm was prepared with watt-level average power, and a maximum power conversion efficiency of 77% was realized from pump to down-converted light. Additionally, the long-term stability of generated power was manifested with a relative fluctuation as low as 0.17% over one hour. Thanks to the all-optical passive synchronization and all-polarization-maintaining fiber architecture, the implemented laser system was also featured with simplicity, compactness and robustness, which would favor subsequent applications beyond laboratory operation.

Anthropogenic activities can lead to several devastating effects on the environment. The pollutants, which include the discharge of effluents, runoffs in the form of different lethal and sub-lethal concentrations of pesticides, heavy metals, and other contaminants, can harm exposed fauna and flora. The aquatic environment is the ultimate destination for many pollutants which negatively affect aquatic biodiversity and even can cause a species to become extinct. A pollutant can directly affect the behavior of an animal, disrupt cellular systems, and impair the immune system. This harm can be reduced and even mitigated by adopting proper approaches for the conservation of the target biota. Among aquatic organisms, cetaceans, such as the Yangtze finless porpoise, Irrawaddy dolphin, Ganges River dolphin, Amazon River dolphin, and Indus River dolphin, are at a higher risk of extinction because of lack of knowledge and research, and thus insufficient information with respect to their conservation status, management, and policies. Pneumonia is one of the leading causes of mass mortalities of cetaceans. This article reviews the limited research reported on stress and pneumonia induced by pollution, stress-induced pneumonia and immunosuppression, pneumonia-caused mass mortalities of aquatic mammals, and vaccination in wildlife with a specific focus on aquatic mammals, the role of genomics in vaccine development and vaccination, and the major challenges in vaccine development for biodiversity conservation.