We provide an assessment of the Infinity Two Fusion Pilot Plant (FPP) baseline plasma physics design. Infinity Two is a four-field period, aspect ratio A = 10, quasi-isodynamic stellarator with improved confinement appealing to a max-J approach, elevated plasma density and high magnetic fields (⟨B⟩ = 9 T). At the envisioned operating point [800 MW deuterium-tritium (DT) fusion], the configuration has robust magnetic surfaces based on magnetohydrodynamic (MHD) equilibrium calculations and is stable to both local and global MHD instabilities. The configuration has excellent confinement properties with small neoclassical transport and low bootstrap current (|Ibootstrap| ∼ 2 kA). Calculations of collisional alpha particle confinement in a DT FPP scenario show small energy losses to the first wall (< 1.5%) and stable energetic particle/Alfvén eigenmodes at high ion density. Low turbulent transport is produced using a combination of density profile control consistent with pellet fueling and reduced stiffness to turbulent transport via three-dimensional shaping. Transport simulations with the T3D-GX-SFINCS code suite with self-consistent turbulent and neoclassical transport predict that the Pfus = 800 MW operating point is attainable with high fusion gain (Q = 40) at volume-averaged electron densities ne ≈ 2×1020 m−3, below the Sudo density limit. Additional transport calculations show that an ignited (Q = ∞) solution is available at slightly higher density (2.2×1020 m−3) with Pfus = 1.5 GW. The magnetic configuration is defined by a magnetic coil set with sufficient room for an island divertor, shielding and blanket solutions with tritium breeding ratios (TBR) above unity. An optimistic estimate for the gas-cooled solid breeder designed Helium Cooled Pebble Bed is TBR ∼ 1.3. Infinity Two satisfies the physics requirements of a stellarator fusion pilot plant.

The selection, design, and optimization of a suitable blanket configuration for an advanced high-field stellarator concept is seen as a key feasibility issue and has been incorporated as a vital and necessary part of the Infinity Two Fusion Pilot Plant (FPP) physics basis. The focus of this work was to identify a baseline blanket which can be rapidly deployed for Infinity Two while also maintaining flexibility and opportunities for higher performing concepts later in development. Results from this analysis indicate that gas-cooled solid breeder designs such as the Helium Cooled Pebble Bed (HCPB) are the most promising concepts, primarily motivated by the neutronics performance at applicable blanket build depths, and the relatively mature technology basis. The lithium lead (PbLi) family of concepts, particularly the Dual Cooled Lithium Lead (DCLL), offer a compelling alternative to solid blanket concepts as they have synergistic developmental pathways while simultaneously mitigating much of the technical risk of those designs. Homogenized 3-dimensional neutronics analysis of the Infinity Two configuration indicates that the HCPB achieves an adequate tritium breeding ratio (TBR) (1.30 which enables sufficient margin at low engineering fidelity), and near appropriate shielding of the magnets (average fast fluence of 1.3 x 1018 n/cm2 per fullpower year). The thermal analysis indicates that reasonably high thermal efficiencies (greater than 30%) are readily achievable with the HCPB paired with a simple Rankine cycle using reheat. Finally, the tritium fuel cycle analysis for Infinity Two shows viability, with anticipated operational inventories of less than one kilogram (approximately 675 grams) and a required TBR (TBRreq) of less than 1.05 to maintain fuel self-sufficiency (approximately 1.023 for a driver blanket with no inventory doubling). Although further optimization and engineering design is still required, at the physics basis stage all initial targets have been met for the Infinity Two configuration.

Optical tracking systems typically trade off between astrometric precision and field of view. In this work, we showcase a networked approach to optical tracking using very wide field-of-view imagers that have relatively low astrometric precision on the scheduled OSIRIS-REx slingshot manoeuvre around Earth on 22 Sep 2017. As part of a trajectory designed to get OSIRIS-REx to NEO 101955 Bennu, this flyby event was viewed from 13 remote sensors spread across Australia and New Zealand to promote triangulatable observations. Each observatory in this portable network was constructed to be as lightweight and portable as possible, with hardware based off the successful design of the Desert Fireball Network. Over a 4-h collection window, we gathered 15 439 images of the night sky in the predicted direction of the OSIRIS-REx spacecraft. Using a specially developed streak detection and orbit determination data pipeline, we detected 2 090 line-of-sight observations. Our fitted orbit was determined to be within about 10 km of orbital telemetry along the observed 109 262 km length of OSIRIS-REx trajectory, and thus demonstrating the impressive capability of a networked approach to Space Surveillance and Tracking.

Gravitational waves from coalescing neutron stars encode information about nuclear matter at extreme densities, inaccessible by laboratory experiments. The late inspiral is influenced by the presence of tides, which depend on the neutron star equation of state. Neutron star mergers are expected to often produce rapidly rotating remnant neutron stars that emit gravitational waves. These will provide clues to the extremely hot post-merger environment. This signature of nuclear matter in gravitational waves contains most information in the 2–4 kHz frequency band, which is outside of the most sensitive band of current detectors. We present the design concept and science case for a Neutron Star Extreme Matter Observatory (NEMO): a gravitational-wave interferometer optimised to study nuclear physics with merging neutron stars. The concept uses high-circulating laser power, quantum squeezing, and a detector topology specifically designed to achieve the high-frequency sensitivity necessary to probe nuclear matter using gravitational waves. Above 1 kHz, the proposed strain sensitivity is comparable to full third-generation detectors at a fraction of the cost. Such sensitivity changes expected event rates for detection of post-merger remnants from approximately one per few decades with two A+ detectors to a few per year and potentially allow for the first gravitational-wave observations of supernovae, isolated neutron stars, and other exotica.

Introduction: In 2018, Canadian postgraduate specialist Emergency Medicine (EM) programs began implementing a competency-based medical education (CBME) assessment system. To support improvement of this assessment program, we sought to evaluate its short-term educational outcomes nationally and within individual programs. Methods: Program-level data from the 2018 resident cohort were amalgamated and analyzed. The number of Entrustable Professional Activity (EPA) assessments (overall and for each EPA) and the timing of resident promotion through program stages was compared between programs and to the guidelines provided by the national EM specialty committee. Total EPA observations from each program were correlated with the number of EM and pediatric EM rotations. Results: Data from 15 of 17 (88.2%) EM programs containing 9,842 EPA observations from 68 of the 77 (88.3%) Canadian EM specialist residents in the 2018 cohort were analyzed. The average number of EPAs observed per resident in each program varied from 92.5 to 229.6 and correlated strongly with the number of blocks spent on EM and pediatric EM (r = 0.83, p < 0.001). Relative to the guidelines outlined by the specialty committee, residents were promoted later than expected and with fewer EPA observations than suggested. Conclusion: We present a new approach to the amalgamation of national and program-level assessment data. There was demonstrable variation in both EPA-based assessment numbers and promotion timelines between programs and with national guidelines. This evaluation data will inform the revision of local programs and national guidelines and serve as a starting point for further reaching outcome evaluation. This process could be replicated by other national assessment programs.

The Murchison Widefield Array is a Square Kilometre Array Precursor. The telescope is located at the Murchison Radio–astronomy Observatory in Western Australia. The MWA consists of 4 096 dipoles arranged into 128 dual polarisation aperture arrays forming a connected element interferometer that cross-correlates signals from all 256 inputs. A hybrid approach to the correlation task is employed, with some processing stages being performed by bespoke hardware, based on Field Programmable Gate Arrays, and others by Graphics Processing Units housed in general purpose rack mounted servers. The correlation capability required is approximately 8 tera floating point operations per second. The MWA has commenced operations and the correlator is generating 8.3 TB day−1 of correlation products, that are subsequently transferred 700 km from the MRO to Perth (WA) in real-time for storage and offline processing. In this paper, we outline the correlator design, signal path, and processing elements and present the data format for the internal and external interfaces.

Antarctic and Southern Ocean science is vital to understanding natural variability, the processes that govern global change and the role of humans in the Earth and climate system. The potential for new knowledge to be gained from future Antarctic science is substantial. Therefore, the international Antarctic community came together to ‘scan the horizon’ to identify the highest priority scientific questions that researchers should aspire to answer in the next two decades and beyond. Wide consultation was a fundamental principle for the development of a collective, international view of the most important future directions in Antarctic science. From the many possibilities, the horizon scan identified 80 key scientific questions through structured debate, discussion, revision and voting. Questions were clustered into seven topics: i) Antarctic atmosphere and global connections, ii) Southern Ocean and sea ice in a warming world, iii) ice sheet and sea level, iv) the dynamic Earth, v) life on the precipice, vi) near-Earth space and beyond, and vii) human presence in Antarctica. Answering the questions identified by the horizon scan will require innovative experimental designs, novel applications of technology, invention of next-generation field and laboratory approaches, and expanded observing systems and networks. Unbiased, non-contaminating procedures will be required to retrieve the requisite air, biota, sediment, rock, ice and water samples. Sustained year-round access to Antarctica and the Southern Ocean will be essential to increase winter-time measurements. Improved models are needed that represent Antarctica and the Southern Ocean in the Earth System, and provide predictions at spatial and temporal resolutions useful for decision making. A co-ordinated portfolio of cross-disciplinary science, based on new models of international collaboration, will be essential as no scientist, programme or nation can realize these aspirations alone.

We are conducting a large survey of distant clusters of galaxies using radio sources with bent jets and lobes as tracers. These radio sources are driven by AGN and achieve their bent morphologies through interaction with the surrounding gas found in clusters of galaxies. Based on low-redshift studies, these types of sources can be used to identify clusters very efficiently. We present initial results from our survey of 653 bent-double radio sources with optical hosts too faint to appear in the SDSS. The sample was observed in the infrared with Spitzer, and it has revealed ~200 distant clusters or proto-clusters in the redshift range z ~ 0.7 - 3.0. The sample of bent-doubles contains both quasars and radio galaxies enabling us to study both radiative and kinetic mode feedback in cluster and group environments at a wide range of redshifts.

Extended abstract of a paper presented at Microscopy and Microanalysis 2011 in Nashville, Tennessee, USA, August 7–August 11, 2011.

Living, intact protoscoleces of the British horse and sheep strains of Echinococcus granulosus were subjected to surface radioiodination procedures using 125I and Iodogen and 125I-Bolton Hunter reagent. Subsequent combined electron microscopy and autoradiography revealed specific surface membrane labelling with the Iodogen procedure, but significant tegumental labelling with the Bolton-Hunter reagent. The two parasite strains yielded different profiles of electrophoretically separated labelled proteins; the Iodogen method, not surprisingly, resulted in a less complex pattern of labelled polypeptides than the Bolton and Hunter reagent.

Mice were infected per os with Trichinella spiralis and their lymphocytes were removed and fused with mouse myeloma cell line P3 × 63Ag8653P3 for the selection of monoclonal antibodies to biochemically defined, stage-specific surface antigens of 3 parasite developmental stages: muscle larvae, adults and newborn larvae. Two separate antibodies against a defined single surface antigen of each stage were isolated. In each separate case the pair of monoclonal antibodies precipitated the same component from detergent-solubilized surface antigen preparations, but only one was able to bind to the surface of the living worm. The other must therefore be directed against an antigenic epitope which is obscured in the intact worm surface. The latter type of antibody is unlikely to be involved in the initial phase of parasite rejection and hence is another example of a non-protective host antibody response. The stimulus for its synthesis may be release of surface antigen, which does occur in vitro. One surface antigen of the newborn larvae is only detected by antibody in the first 6 h after birth; thereafter its presence is obscured as other antigens appear. The major surface antigen of the infective larvae contains carbohydrate determinants which are not available at the parasite surface. In addition, it displays great molecular heterogeneity but all variants appear to be derived from a common polypeptide structure.