To classify the clinical characteristics of ocular toxocariasis in Japan, the prevalence of antibodies to Toxocara antigens was examined in patients with uveitis of unknown aetiology. From 1982 to 1993, serum specimens of 383 cases and intraocular fluid samples of 22 cases were serologically screened for Toxocara infection with five immunodiagnostic tests. Fifty-five sera and 11 intravitreous fluid samples were estimated to have significantly high antibody levels against larval excretory–secretory (ES) antigens of T. canis. Eight cases were positive in both serum and vitreous fluid, and three were positive only in the vitreous fluid. Among the 58 antibody positive samples, 20 cases were omitted due to a lack of detailed description of ocular findings. The remaining 38 cases are described in this study. Of these 38 cases, 34 (89%) were older than 20 years of age. Ocular lesions were located in the posterior fundus in 11 cases, in the peripheral fundus in 18 cases, and in both areas in seven cases. Of the eight cases in which papillary oedema or redness was observed, chorioretinal lesions were also present in seven of them. Tractional retinal detachment was present in five cases. These observations suggest that ocular toxocariasis in Japan has a different clinical profile compared with those in the other countries, and indicate a need for revised classification of ocular toxocariasis.

Oxygen isotope composition of three types of unique nodules which consist of amorphous silica-apatite, cristobalite-apatite and tridymite-apatite associations interspersed amidst basaltic pyroclastics from the Har Peres volcano, Golan Heights, Israel is reported. Unusual isotopic temperature (75°C estimated from oxygen isotope fractionation between cristobalite (δ18O = +25.5‰)-apatite (δ18O = +12.9‰) pair suggests that the nodule was not formed by present-day pedogenesis as has been previously proposed, but was a xenolith incorporated probably from the underlying siliceous phosphorites at a higher temperature. An observed negative oxygen isotopic fractionation (δ18O = −5.1‰) between tridymite (δ18O = +9.9‰) and associated apatite (δ18O = +15.0‰) is indicative of the nodular formation under disequilibrium conditions. A plausible mechanism of formation of the apatite (and calcite) associated with tridymite is an epitaxial overgrowth on template tridymite of magmatic origin under the current weathering regime. Oxygen isotopic evidence indicates a complicated origin for the nodules.

Birthweight has been associated with diabetes in a reverse J-shape (highest risk at low birthweight and moderately high risk at high birthweight) and inversely associated with hypertension in adulthood with inconsistent evidence for cardiovascular disease. There is a lack of population-based studies examining the incidence of cardiometabolic outcomes in young adults born with low and high birthweights. To evaluate the association between birthweight and diabetes, hypertension, and ischemic heart disease (IHD) in young adulthood, we conducted a retrospective cohort study of 874,904 singletons born in Ontario, Canada, from 1994 to 2002, identified from population-based health administrative data. Separate Cox regression models examined birthweight in association with diabetes, hypertension, and IHD adjusting for confounders. Among adults 18–26 years, the diabetes incidence rate was 18.15 per 100,000 person-years, hypertension was 15.80 per 100,000 person-years, and IHD was 1.85 per 100,000 person-years. Adjusted hazard ratios (AHR) for the hazard of diabetes with low (<2500g) and high (>4000g), compared with normal (2500–4000g) birthweight, were 1.46 (95% CI 1.28, 1.68) and 1.09 (0.99, 1.21), respectively. AHR for hypertension with low and high birthweight were 1.34 (1.15, 1.56) and 0.86 (0.77, 0.97), respectively. AHR for IHD with low and high birthweight were 1.28 (0.80, 2.05) and 0.97 (0.71, 1.33), respectively. Overall, birthweight was associated with diabetes in young adults in a reverse J-shape and inversely with hypertension. There was insufficient evidence of an association with IHD. Further evidence is needed to understand the causal mechanisms between birthweight and cardiometabolic diseases in young adults.

We present ALMA detection of the [O iii] 88 μm line and 850 μm dust continuum emission in a Y-dropout Lyman break galaxy, MACS0416_Y1. The [O iii] detection confirms the object with a spectroscopic redshift to be z = 8.3118±0.0003. The 850 μm continuum intensity (0.14 mJy) implies a large dust mass on the order of 4×106M⊙. The ultraviolet-to-far infrared spectral energy distribution modeling, where the [O iii] emissivity model is incorporated, suggests the presence of a young (τage ≍ 4 Myr), star-forming (SFR ≍ 60M⊙yr−1), and moderately metal-polluted (Z ≍ 0.2Z⊙) stellar component with a stellar mass of 3 × 108M⊙. An analytic dust mass evolution model with a single episode of star formation does not reproduce the metallicity and dust mass in ≍ 4 Myr, suggesting an underlying evolved stellar component as the origin of the dust mass.

Pneumococcal serotype replacement is an important issue after the introduction of pneumococcal conjugate vaccine (PCV) in children. After the introduction of 13-valent PCV, the incidence of invasive pneumococcal diseases (IPD) caused by Streptococcus pneumoniae serotype 12F (Sp12F) have increased in some countries; however, an outbreak of Sp12F has not reported in the post-13-valent PCV era. We experienced a local outbreak of Sp12F during March through May 2016 in Tsuruoka city, Japan after the introduction of 13-valent PCV in 2013. The IPD patients were two children and seven adults, three of whom died with a rapid disease progress. Although the clear transmission route was not determined, eight of the nine patients (89%) had close contact with children, which suggests that transmitted colonisation of Sp12F among children and adults might be the source of transmission. Continuous monitoring of IPDs, along with the determination of pneumococcal serotypes, is warranted in the post–13-valent PCV era. New IPD control strategies may be needed if this fatal outbreak continues to occur.

We discuss discrete stochastic processes with two independent variables: one is the standard symmetric random walk, and the other is the Poisson process. Convergence of discrete stochastic processes is analysed, such that the symmetric random walk tends to the standard Brownian motion. We show that a discrete analogue of Ito’s formula converges to the corresponding continuous formula.

Monitor of All-sky X-ray Image (MAXI) on board International Space Station is capable ofobserving gamma-ray bursts (GRBs) and sending notices of GRBs or other transient events,using real time connection to the ground. MAXI observed 32 GRBs or short X-ray transientsas of the end of September 2012. Among them, eleven events were simultaneously detected byother satellites. The observed rate of the MAXI GRBs is about one event per month. Thisrate is comparable to a past observation with larger effective area and larger field ofview. The fact indicates that MAXI has better sensitivity to observe GRBs because of lowbackground. The distribution of the spectral hardness of MAXI GRBs is similar to theresults of a past instrument, which is sensitive to similar energy range.

It is difficult to get a real scale image of the solar system through lecture. A scale model is a classical and one of good solutions (e.g. Handa et al.2003, Handa et al.2008). Through this model, people living in or visiting to the city can physically understand the scale of the solar system. This scale gives 1 cm for Earth's diameter and 115 m for 1 AU. However, some gadget is required to make it attractive for public citizens.

The current trends in stimulated Brillouin scattering and optical phase conjugation are overviewed. This report is formed by the selected papers presented in the “Fifth International Workshop on stimulated Brillouin scattering and phase conjugation 2010” in Japan. The nonlinear properties of phase conjugation based on stimulated Brillouin scattering and photo-refraction can compensate phase distortions in the high power laser systems, and they will also open up potentially novel laser technologies, e.g., phase stabilization, beam combination, pulse compression, ultrafast pulse shaping, and arbitrary waveform generation.

For the gate last approach of a high K metal gate scheme used in advanced CMOS technology, various materials were tested as wetting layers to allow Aluminum (Al) gap fill at gate widths of10 to 45 nanometers. In this study, Titanium (Ti) and Cobalt (Co) were investigated as a wetting layer for Al gap fill. It was discovered that Al-Ti and Al-Co alloys were formed during high temperature Al deposition. Alloys were characterized using XRD. Alloy’s impacts on line resistivity and subsequent Al Chemical Mechanical Polish (Al CMP) were also investigated. In addition, a model was established to predict the alloy type and alloy mole% with respect to feature size. The predicted Al mole% by this model correlated very well with 1) line resistivity trend and 2) morphologies. The model also predicted that due to Al lower electro-chemical potential than Ti, Co or its alloys, galvanic corrosion could take place depending on the chemical environment in the Al CMP slurry. Different slurry or cleaning chemical may reduce or increase the risk of galvanic corrosion. The knowledge gained with the help of the model provides clear directions on selection criteria for wetting layers, optimization for deposition processes and Al CMP consumable design to meet the challenges.

High reliability, low power consumption and high speed laser diodes are required for optical interconnect. We developed 1060nm VCSELs with InGaAs/GaAs strained quantum wells, oxide-confined and double intra-cavity structures for that purpose. As for the power consumption, low power dissipation of 0.14 mW/Gbps at 10 Gbps operation has been achieved. Clear eye openings up to 20 Gbps were confirmed at a low bias current of 5 mA. In the reliability test, accelerated aging tests were performed up to 5,000 hours at 6 mA in three different temperatures, 70 oC, 90 oC and 120 oC. The total number of the VCSELs was 4,898 pcs (approximately 5,000). No failure was observed. Under the normal operating condition of 40 oC and 6 mA, the total device-hours was 7.75×107 hours assuming Ea = 0.35 eV according to Telcordia GR-468-CORE. The random failure rate of 30 FIT with the confidence level (C.L.) of 90 % and 12 FIT with the C.L. of 60 % were estimated. To estimate the wear-out lifetime and the number of FITs, high stressed aging tests with 170 oC and 6 mA were performed. With the acceleration factor of Ea = 0.7 eV in the wear-out failure, the median lifetime was 3,000 hours which was equivalent to 300 years in 40 oC ambient. The FIT numbers due to the wear-out were estimated as 0.3 FIT for 10 years. Compared with the random failure rate of 30 FIT, the wear-out failure rates are considered to be negligible. In the extremely long term aging test with 90 oC and 6 mA, no wear-out trend has been observed in both threshold current and optical power up to 20,000 hours operation. These results indicate that 1060 nm VCSEL is promising light source used in optical interconnect for high performance computers and data centers.

Thermoelectric properties of the Li-doped Cu0.95-xM0.05LixO (M=divalent metal ion; Mn, Ni, Zn) were investigated at the temperature up to 1273 K. In the doped divalent metal ions, Zn2+ ion was the most effective to reduce the thermal conductivity, and the Ni2+ substitution was preferable to decrease the electrical resistivity. For the Cu0.95-xNi0.05LixO sample at x=0.03, the maxima of the dimensionless thermoelectric figure of merit ZT and the power factor P at 1246 K were 4.2×10-2 and 1.6 ×10-4 W/K2m, respectively. The enhancement of the thermoelectric properties of the Li-doped Cu0.95-xM0.05LixO system was discussed.

We developed the novel pressure-annealing method for fabricating printed low-work function metal patterns and printed metal alloy patterns. The printed diode having various rectification properties was successfully produced by using the printed metal alloy electrode pressure-annealed.

Extended abstract of a paper presented at Microscopy and Microanalysis 2011 in Nashville, Tennessee, USA, August 7–August 11, 2011.

Extended abstract of a paper presented at Microscopy and Microanalysis 2011 in Nashville, Tennessee, USA, August 7–August 11, 2011.

We present new, wide, and deep images in the AzTEC/ASTE 1.1 mm continuum and the 12 CO (J = 1–0) emission toward the northern part of the Orion-A GMC. We have found evidence for interactions between molecular clouds and the external forces that may trigger star formation. Two types of possible triggers were revealed: (1) Collisions of the diffuse gas on the cloud surface, particularly at the eastern side of the OMC-2/3 region, and (2) Irradiation of UV on the pre-existing filaments and dense molecular cloud cores. Our wide-field and high-sensitivity imaging has provided the first comprehensive view of the potential sites of triggered star formation in the Orion-A GMC.

The present work has been done within the IAEA Environmental Modelling for Radiation Safety Programme. EMRAS-II aims to improve the capabilities in the field of environmental radiation dose assessment by means of acquisition of improved data for model testing, comparison, reaching consensus on modelling philosophies, approaches and parameter values, development of improved methods and exchange of information.