Organo-montmorillonite (OMnt) has wide applications in paints, clay-polymer nanocomposites, biomaterials, etc. In most cases, the dispersibility and swellability of OMnt dictate the performance of OMnt in the target products. Previous studies have revealed that the properties can be improved when multiple organic species are co-introduced into the interlayer space of montmorillonite (Mnt). In the present study, single surfactant erucylamide (EA), dual-surfactants cetyltrimethyl ammonium bromide (CTAB) and octadecyltrimethyl ammonium chloride (OTAC), and ternary-surfactants EA, CTAB, and OTAC were co-introduced into Mnt by solution intercalation. The resulting OMnts were characterized by powder X-ray diffraction (XRD), Fourier-transform infrared (FTIR) spectroscopy, thermogravimetry-differential thermogravimetry (TG-DTG), water contact-angle tests, scanning electronic microscopy (SEM), laser particle-size analysis, and swelling indices. Mnt co-modified by ternary CTAB, OTAC, and EA led to a large d001 value (4.20 nm), surface hydrophobicity with a contact angle of 95.6°, swellability (50 mL/g) with small average particle sizes (2.1−2.8 μm) in xylene, and >99% of the OMnt particles were kept as <5 μm in deionized water. The formation of EA-modified-Mnt was proposed according to hydrophobic affinity, hydrogen bonding, and van der Waals forces. The nanoplatelets of the CTA+, OTA+, and EA co-modified OMnts in xylene were assembled into a house-of-cards structure by face-to-edge and edge-to-edge associations. The electrostatic attractions, electrostatic and steric repulsions, and hydrophobic interactions were responsible for the good dispersibility of OMnt in xylene. The ternary surfactant co-modified OMnt with high dispersion and swellability will make OMnt better suited for real-world applications.

Intertemporal choices involve tradeoffs between outcomes that occur at different times. Most of the research has used pure gains tasks and the discount rates yielding from those tasks to explain and predict real-world behaviors and consequences. However, real decisions are often more complex and involve mixed outcomes (e.g., sooner-gain and later-loss or sooner-loss and later-gain). No study has used mixed gain-loss intertemporal tradeoff tasks to explain and predict real-world behaviors and consequences, and studies involving such tasks are also scarce. Considering that tasks involving a combination of gains and losses may yield different discount rates and that existing pure gains tasks do not explain or predict real-world outcomes well, this study conducted two experiments to compare the discount rates of mixed gain-loss intertemporal tradeoffs with those of pure gains or pure losses (Experiment 1) and to examine whether these tasks predicted different real-world behaviors and consequences (Experiment 2). Experiment 1 suggests that the discount rate ordering of the four tasks was, from highest to lowest, pure gains, sooner-loss and later-gain, pure losses, and sooner-gain and later-loss. Experiment 2 indicates that the evidence supporting the claim that the discount rates of the four tasks were related to different real-world behaviors and consequences was insufficient.

Environmental hypoxia exposure causes fertility problems in human and animals. Compelling evidence suggests that chronic hypoxia impairs spermatogenesis and reduces sperm motility. However, it is unclear whether paternal hypoxic exposure affects fertilization and early embryo development. In the present study, we exposed male mice to high altitude (3200 m above sea level) for 7 or 60 days to evaluate the effects of hypoxia on sperm quality, zygotic DNA methylation and blastocyst formation. Compared with age-matched controls, hypoxia-treated males exhibited reduced fertility after mating with normoxic females as a result of defects in sperm motility and function. Results of in vitro fertilization (IVF) experiments revealed that 60 days’ exposure significantly reduced cleavage and blastocyst rates by 30% and 70%, respectively. Immunohistochemical staining of pronuclear formation indicated that the pronuclear formation process was disturbed and expression of imprinted genes was reduced in early embryos after paternal hypoxia. Overall, the findings of this study suggested that exposing male mice to hypoxia impaired sperm function and affected key events during early embryo development in mammals.

The aim was to systematically analyse the association of the specific flavonoids, Mg and their interactions from different food sources with the metabolic syndrome (MetS) and its components in a cohort study. A total of 6417 participants aged 20 to 74 years from the Harbin Cohort Study on Diet, Nutrition and Chronic Non-communicable Diseases were included. Multivariate logistic regression analyses, forest plot and restricted cubic spline were performed in the study. After a 5·3-year follow-up, 1283 incident cases of the MetS were reported. Those with a higher total flavonoid intake had a lower risk of the MetS (fourth v. first quartile, relative risk (RR) 0·58; 95 % CI 0·37, 0·93; P = 0·024) and central obesity (RR 0·56; 95 % CI 0·33, 0·95; P = 0·032). Further analysis showed that the specific flavonoids quercetin, kaempferol, isorhamnetin, luteolin, and flavonoids from fruits, potatoes and legumes had the similar associations with risk of the MetS and central obesity (P < 0·05 for all). A higher intake of total flavonoids, quercetin and luteolin combined with a high level of Mg was more strongly associated with a lower risk of the MetS (RR 0·60; 95 % CI 0·45, 0·81 for total; RR 0·61; 95 % CI 0·45, 0·82 for quercetin; RR 0·52; 95 % CI 0·38, 0·71 for luteolin; all Pfor interaction < 0·01). Dose–response effects showed an L-shaped curve between the total intake of five flavonoids and the risk of the MetS. A higher flavonoid intake is associated with a lower risk of the MetS and central obesity; their combination with Mg helps to strengthen their negative association with the MetS.

Northeastern China is a region of high tick abundance, multiple tick-borne pathogens and likely human infections. The spectrum of diseases caused by tick-borne pathogens has not been objectively evaluated in this region for clinical management and for comparison with other regions globally where tick-transmitted diseases are common. Based on clinical symptoms, PCR, indirect immunofluorescent assay and (or) blood smear, we identified and described tick-borne diseases from patients with recent tick bite seen at Mudanjiang Forestry Central Hospital. From May 2010 to September 2011, 42% (75/180) of patients were diagnosed with a specific tick-borne disease, including Lyme borreliosis, tick-borne encephalitis, human granulocytic anaplasmosis, human babesiosis and spotted fever group rickettsiosis. When we compared clinical and laboratory features to identify factors that might discriminate tick-transmitted infections from those lacking that evidence, we revealed that erythema migrans and neurological manifestations were statistically significantly differently presented between those with and without documented aetiologies (P < 0.001, P = 0.003). Twelve patients (6.7%, 12/180) were co-infected with two tick-borne pathogens. We demonstrated the poor ability of clinicians to identify the specific tick-borne disease. In addition, it is necessary to develop specific laboratory assays for optimal diagnosis of tick-borne diseases.

We reported 2009 H1N1 influenza infections among healthcare workers (HCWs) and inpatients and the prevention measures instituted in a large Chinese hospital. In total, 171 HCWs and 89 inpatients tested positive for H1N1. Sixteen HCWs had known hospital exposure, among whom only 7 had working-contact exposure. There was no influenza outbreak.

Infect Control Hosp Epidemiol 2012;33(3):295-298

Male and female Schistosoma japonicum worms have dissimilar appearances in their final host. In this study, a morphometric and morphological assessment of whole worms derived from unisexual and mixed infections in mice was conducted using confocal laser scanning microscopy. Worms from mixed infections showed significant morphological changes between 15 and 25 days post-infection (PI). On the fifteenth day PI, 33% of males had formed the conspicuous gynecophoric canal, but only 8% of them had testicular lobes containing a few germinative cells; 13% of females had incipient ovaries with a few immature ovarian cells inside. On the twentieth day PI, the testicular lobes contained more germinative cells in all male worms, while female worms presented vitelline glands. On the twenty-fifth day PI, more germinative cells were observed in the male testicular lobes, and differentiated cells were present in the female ovaries. All worms had fully developed reproductive organs from 30 days PI onwards. Morphometric analysis showed significant differences between mixed and unisexual infections at 35 days PI. Ovaries of worms from unisexual infections contained cells in one stage of maturation and vitelline glands had undifferentiated cells. Our study of S. japonicum provides a detailed comparison of different morphological traits from worms of mixed and unisexual infections throughout development.

This work focuses on the fabrication of magnetic nanowires with specialized geometries, such as Y-junctions, tapers and multilayers, for magnetoresistive sensor arrays. First, anodic alumina nanopores were grown with diameters of 20–250nm and lengths up to tens of microns. These pores were removed from their Al substrates and the barrier oxide was removed. Co nanowires were initially grown inside the pores by electrochemical deposition. It was shown that the coercivity and remnant magnetization could be tripled in (100)-oriented Co by shrinking the pore diameter/interpore spacing from 150/300nm to 40/80nm. These properties were further enhanced by fabricating (002)-oriented Co using the proper pH and applying a magnetic field during growth. The ability to connect two or more nanostructures is critical to the long term success of nanoelectronics and circuits. Here, Y-junctions were grown by subsequent growth of 40nm then 20nm pores such that two smaller pores extended from the bottom of each larger pore. These pores were then filled with Co in order to produce Y-junctions in the magnetic nanowires. Next, multilayered nanowires were fabricated with alternating layers of Cu and Co. The Co layer thickness was varied in order to study the affect of shape anisotropy on the magnetic properties of Co layers inside arrays. Finally, several configurations for magnetoresistive magnetic field sensors were described.