We investigate the Rayleigh–Taylor instability of a thin liquid film coated on the inside of a cylinder whose axis is orthogonal to gravity. We are interested in the effects of geometry on the instability, and contrast our results with the classical case of a thin film coated under a flat substrate. In our problem, gravity is the destabilizing force at the origin of the instability, but also yields the progressive drainage and stretching of the coating along the cylinder’s wall. We find that this flow stabilizes the film, which is asymptotically stable to infinitesimal perturbations. However, the short-time algebraic growth that these perturbations can achieve promotes the formation of different patterns, whose nature depends on the Bond number that prescribes the relative magnitude of gravity and capillary forces. Our experiments indicate that a transverse instability arises and persists over time for moderate Bond numbers. The liquid accumulates in equally spaced rivulets whose dominant wavelength corresponds to the most amplified mode of the classical Rayleigh–Taylor instability. The formation of rivulets allows for a faster drainage of the liquid from top to bottom when compared to a uniform drainage. For higher Bond numbers, a two-dimensional stretched lattice of droplets is found to form on the top part of the cylinder. Rivulets and the lattice of droplets are inherently three-dimensional phenomena and therefore require a careful three-dimensional analysis. We found that the transition between the two types of pattern may be rationalized by a linear optimal transient growth analysis and nonlinear numerical simulations.

Contamination of a point-of-care ultrasound system (POCUS) mainly involved electrocardiography accessories and included pathogenic microorganisms. The use of a glass-sealed control panel significantly facilitated its cleaning and reduced its bacterial contamination compared with a standard control panel. Overall hand hygiene compliance during examinations with POCUS was poor.

Infect Control Hosp Epidemiol 2014;35(12):1539–1542

Here we report the first membrane-less biofuel cell made by using three-dimensional carbonaceous foam electrodes. We first developed a new synthetic pathway to produce a new carbonaceous foam electrode material with increased porosity both in the meso and macroporous scale. We proved that by increasing the porosity of our three-dimensional foams we could increase the current density of our modified electrodes. Then, by choosing the right combination of enzyme and mediator, and the right loading of active components, we achieved unprecedentedly high current densities for an anodic system. Finally, we combined the improved cathode and anode to build a new membrane-less hybrid enzymatic biofuel cell consisting of a mediated anode and a mediator-less cathode.

The purpose of this paper is to substantiate the importance of research about barriers and levers to the implementation of supports for cross-cultural communication in primary care settings in Europe. After an overview of migrant health issues, with the focus on communication in cross-cultural consultations in primary care and the importance of language barriers, we highlight the fact that there are serious problems in routine practice that persist over time and across different European settings. Language and cultural barriers hamper communication in consultations between doctors and migrants, with a range of negative effects including poorer compliance and a greater propensity to access emergency services. It is well established that there is a need for skilled interpreters and for professionals who are culturally competent to address this problem. A range of professional guidelines and training initiatives exist that support the communication in cross-cultural consultations in primary care. However, these are commonly not implemented in daily practice. It is as yet unknown why professionals do not accept or implement these guidelines and interventions, or under what circumstances they would do so. A new study involving six European countries, RESTORE (REsearch into implementation STrategies to support patients of different ORigins and language background in a variety of European primary care settings), aims to address these gaps in knowledge. It uses a unique combination of a contemporary social theory, normalisation process theory (NPT) and participatory learning and action (PLA) research. This should enhance understanding of the levers and barriers to implementation, as well as providing stakeholders, with the opportunity to generate creative solutions to problems experienced with the implementation of such interventions.

This work concerns the search for new electrode materials for efficient biofuel cells applications. Using a hard templating method we prepared carbonaceous electrodes modified further with Glucose Oxidase and Os polymer. The glucose electrooxidation current is 13-fold bigger on the porous electrode than on flat glassy carbon for the same enzyme loading. These electrodes are three dimensional and posses hierarchical porosity, to optimize the need for both surface area and efficient fuel delivery Although, the dependence of the catalytic current with the rotation rate suggests that the size and quantity of the macropores is not yet fully optimized, the electrode preparation protocol is simple and low cost, and can be easily adapted to tune the pore sizes. The mechanical strength and the synthetic route allow for the external shape and size of the electrodes to be designed on demand, an important feature to incorporate electrodes into devices.

Microporous-macroporous carbononaceous monolith-type materials, prepared through a hard template method using silica as exo-templating matrices, have been impregnated by an etheric solution of LiBH4 to prepare LiBH4@Carbon samples. It has been shown that the amorphous character of LiBH4 is largely favoured when developing the carbon microporosity (pores smaller than 2 nm) and that LiBH4 dehydrogenation is strongly enhanced at low temperatures. The onset temperature of dehydrogenation can be decreased to 200°C and hydrogen capacity reaching 4.0 wt.% is obtained at 300°C with the carbon having the largest microporous volume, whereas the hydrogen release for bulk LiBH4 is negligible at the same temperature. In addition to some irreversible reactions with carbon surface groups the explanation for such modification could lie in the LiBH4 destabilization through confinement to the nanoscale range and associated amorphization.

The one pot-synthesis and use of monolithic biohybrid foams in a continuous flow device reported inhere presents the advantages of covalent stabilization of the enzymes, together with a low steric hindrance between proteins and substrates, an optimized mass transport due to the interconnected macroporous network and a rather simplicity in regard of the column in-situ synthetic path. Those features, concerning transesterification (biodiesel production) enzyme- based catalyzed reaction, provide high enzymatic activity addressed with bio-hybrid catalysts bearing unprecedented endurance of continuous catalysis for a two months period of time.

3D high resolution simulations for the convective zone of a 4Myr old 0.7 M⊙ pre-main sequence star in gravitational contraction are carried out with different radial density contrast using the pseudo spectral ASH code (Brun et al. 2004). We extract giant cells signal from the complex surface convective patterns by using a wavelet analysis. We then characterize them by estimating their lifetime and rotation rate according to the density contrast.

Using a hard exotemplate procedure, hierarchically structured carbonaceous foams have been designed, using silica monolith as inorganic template and phenolic resin as carbon precursor. The open cell carbonaceous monoliths exhibit specific surface areas from 500 to 800 m2.g-1, essentially based on microporosity and macropores ranging from 0.05 up to 50 μm. Application as electrochemical energy storage devices have been checked and discuss inhere.

The covalent immobilization of crude lipases within silica-based macroporous frameworks have been performed by combining sol-gel process, concentrated direct emulsion, lyotropic mesophase and post-synthesis functionalizations. The as-synthesized open cell hybrid monoliths exhibit high macroscopic porosity, around 90 %, providing interconnected scaffold while reducing the diffusion low kinetic issue. The entrapment of enzymes in such foams deals with a high stability over esterification and transesterification batch process catalysis.

A wide range of factors can be attributed to the syndrome of fatty liver observed in some cultured fish species. The objective of the study was therefore to quantify different hepatocyte ultrastructural features as potentially influenced by twelve nutritional and husbandry factors, in order to discriminate the most influent factors in Eurasian perch (Perca fluviatilis), a typical carnivorous temperate fish species. Twenty-four groups of juveniles (initial weight 57·6 (sd 14·4) g) were intensively reared for 116 d and fed sixteen different isoproteic diets. The distribution of the experimental treatments was based on a multivariate fractional factorial design (L24 212) with either high (+1) or low ( − 1) level of each of the following factors: diet (lipid and protein sources, lipid content, astaxanthin enrichment), feeding level, daily and weekly distribution frequency, fish density, initial weight heterogeneity, temperature, photoperiod, and light spectrum. Liver lipid droplets, glycogen, mitochondria and rough endoplasmic reticulum (RER) were semi-quantified and analysed by a soft imaging system using transmission electronic microscopy photographs. Important variability of hepatocyte ultrastructural features was observed. The present study confirms that the rearing temperature, through its influences in the general metabolic activity, seems to be the main factor modifying mainly lipid droplet accumulation and RER development. However, factors that could be pooled under the designation of factors leading to food accessibility and lipid and protein quality intensify or compensate the effect of temperature.

Polyvinyl alcohol/Poly-aniline/Vanadium Oxide nanocomposite-based macroscopic fibers have been generated by using a redox reaction addressed while performing an extrusion shaping process. The resulting composites have been thoroughly characterized via a large set of techniques such as SEM, SAXS, XRD and FTIR, in order to determine aniline effects over final materials' structures and properties. Thus, the perturbation of the preferential orientation of the V2O5 nano-ribbons toward the fiber main axis, induced by aniline Red-ox intercalation, has been observed. Also, the partial reduction of V5+ species to V4+ ones, due to the strongly oxidizing character of the first ones toward aniline, has been revealed by Electron Spin Resonance (ESR). Moreover, these fibers are able to detect 5 ppm of ethanol within 3-5 seconds at 42 °C, and possess a toughness of 12 J.g-1.

Using both β-diketone and malonamide organosilane derivatives and silica Si-HIPE macro-mesocellular foams (acronym refers to the High Internal Phase Emulsion process), organically modified silicates (ORMOSILs) with chelating functionality have been synthesized. The organic functionalities have been anchored to the silica porous networks by both a two-steps grafting method, relating to grafted gOrgano-Si(HIPE), and a one-step co-condensation process, relating to Organo-Si(HIPE). The loading of monoliths by lanthanides was performed by impregnation of an europium (III) salt in solution, leading to a new Eu3+@(g)Organo-Si(HIPE) hybrid foams series. The resulting materials have been thoroughly characterized via a large set of techniques such as SEM, TEM, SAXS, mercury intrusion porosimetry, nitrogen adsorption, FTIR and 29Si CP MAS NMR. Luminescence behavior of this Eu3+@Organo-Si(HIPE) series was also studied and the effects of environment and europium concentration will be discussed.