This paper provides an overview of the current status of ultrafast and ultra-intense lasers with peak powers exceeding 100 TW and examines the research activities in high-energy-density physics within China. Currently, 10 high-intensity lasers with powers over 100 TW are operational, and about 10 additional lasers are being constructed at various institutes and universities. These facilities operate either independently or are combined with one another, thereby offering substantial support for both Chinese and international research and development efforts in high-energy-density physics.

C-type lectins (CTLs), a diverse family of pattern recognition receptors, are essential for immune recognition and pathogen clearance in invertebrates. TcCTL17 contains one carbohydrate recognition domain and three scavenger receptor Cys-rich domains. Spatial and temporal expression analysis revealed that TcCTL17 is highly expressed in early pupa, early adult stages, and the larval gut at 20 days. The recombinant TcCTL17 exhibited dose-dependent binding to lipopolysaccharides and peptidoglycans, Ca2+-dependent binding and agglutination of bacteria in vitro. Knocking down TcCTL17 before bacterial exposure reduced survival rates and increased bacterial loads in T. castaneum larvae, accompanied by decreased antimicrobial peptide expression and haemolymph phenoloxidase activity. Additionally, TcCTL17 RNA interference caused developmental abnormalities, affecting metamorphosis and fecundity, possibly by influencing the 20E, JH, and vitellogenin pathways. These findings underscore dual functions of TcCTL17 in immunity and development, making it a potential target for pest management.

The aerodynamic deformation and breakup of wall-attached droplets in axisymmetric stagnation flow are investigated experimentally. A vertical shock tube is used to generate the shock wave accompanying the post-wave airflow, and the axisymmetric stagnation flow is formed through the impingement of an air stream on a solid wall. For the wall-attached droplets with initially hemispherical profile, four typical droplet deformation and breakup modes can be identified with the continuous increase of the droplet local Weber number, which are the vibrating mode, the compressing mode, the sheet thinning mode and the shear-induced entrainment mode. Quantitative analyses of droplet evolution dynamics are also conducted for the compressing mode and the sheet thinning mode, and the significant differences of air flow separation at the droplet lateral surface between these two modes are revealed. The potential flow model and the energy conservation model are further developed to predict the entire droplet deformation processes. The vibrating frequency and amplitude of droplets under the vibrating mode are predicted by a spring-mass model, and the surface perturbation wavelengths of droplets under the shear-induced entrainment mode are estimated based on the dispersion relation of Kelvin–Helmholtz instability. This work is proposed to give potential guidance for regulating the aerodynamic fragmentation of wall-attached droplets in practical engineering applications.

Spin coating is the process of generating a uniform coating film on a substrate by centrifugal forces during rotation. In the framework of lubrication theory, we investigate the axisymmetric film evolution and contact-line dynamics in spin coating on a partially wetting substrate. The contact-line singularity is regularized by imposing a Navier slip model. The interface morphology and the contact-line movement are obtained by numerical solution and asymptotic analysis of the lubrication equation. The results show that the evolution of the liquid film can be classified into two modes, depending on the rotational speed. At lower speeds, the film eventually reaches an equilibrium state, and we provide a theoretical description of how the equilibrium state can be approached through matched asymptotic expansions. At higher speeds, the film exhibits two or three distinct regions: a uniform thinning film in the central region, an annular ridge near the contact line, and a possible Landau–Levich–Derjaguin-type (LLD-type) film in between that has not been reported previously. In particular, the LLD-type film occurs only at speeds slightly higher than the critical value for the existence of the equilibrium state, and leads to the decoupling of the uniform film and the ridge. It is found that the evolution of the ridge can be well described by a two-dimensional quasi-steady analysis. As a result, the ridge volume approaches a constant and cannot be neglected to predict the variation of the contact-line radius. The long-time behaviours of the film thickness and the contact radius agree with derived asymptotic solutions.

Sepiolite is considered a suitable substrate for Maya blue pigment. However, the interaction between sepiolite and indigo dye has not been fully understood. Previous studies have demonstrated that pre-treatment of sepiolite by heating or acid was useful in identifying the sepiolite–indigo interaction. The purpose of the present study was to prepare a series of hybrid sepiolite–indigo pigments after modifying the sepiolite using various alkali treatments (NaOH), then to evaluate their properties with respect to color, chemical resistance, and photostability. Samples were characterized using reflectance spectroscopy, X-ray diffraction, Fourier-transform infrared spectroscopy, Raman spectroscopy, transmission electron microscopy, and N2 adsorption-desorption. Under alkaline conditions, Si4+ and Mg2+ ions in sepiolite partially dissolved, disrupting the coordinated water associated with them. Mg2+ ions precipitated and blocked the structural channels of the sepiolite. The impact of the alkali treatment on the microporous structure and coordinated water of sepiolite significantly influenced the color properties and stability of the hybrid pigments. Proper alkaline treatment enhanced the greenish hue and chemical stability of the pigment, while severe treatments apparently compromised the structural integrity of the sepiolite, thus diminishing the quality of the hybrid pigment. Results from this study provide new insights into the color-causing and stabilizing mechanisms of sepiolite-based Maya blue pigment and also provide guidance for developing hybrid pigments based on clay minerals and organic dyes.

The whitefly, Bemisia tabaci is a cryptic species complex in which one member, Middle East-Asia Minor 1 (MEAM1) has invaded globally. After invading large countries like Australia, China, and the USA, MEAM1 spread rapidly across each country. In contrast, our analysis of MEAM1 in India showed a very different pattern. Despite the detection of MEAM1 being contemporaneous with invasions in Australia, the USA, and China, MEAM1 has not spread widely and instead remains restricted to the southern regions. An assessment of Indian MEAM1 genetic diversity showed a level of diversity equivalent to that found in its presumed home range and significantly higher than that expected across the invaded range. The high level of diversity and restricted distribution raises the prospect that its home range extends into India. Similarly, while the levels of diversity in Australia and the USA conformed to that expected for the invaded range, China did not. It suggests that China may also be part of its home range. We also observed that diversity across the invaded range was primarily accounted for by a single haplotype, Hap1, which accounted for 79.8% of all records. It was only the invasion of Hap1 that enabled outbreaks to occur and MEAM1’s discovery.

A modeling method of multi-objective optimization design for parallel mechanisms (PMs) is proposed, whose implementation is illustrated with 2RPU-RPS mechanism as an example. The orientation of biased output axis on moving platform is depicted by spherical attitude angles, and its kinematic model is deduced through vector method. With screw theory as mathematic tool, a comprehensive evaluation method of kinematic performance for PM is established. On this basis, the expensive constrained multi-objective optimization model of dimensional parameters for the discussed mechanism is constructed. The NSDE-II algorithm, formed by replacing the genetic algorithm operators in non-dominated sorting genetic algorithm II (NSGA-II) with DE operators, is utilized to solve this multi-objective optimization problem, thus obtaining multiple Pareto optimal solutions with engineering application significance, which proves the feasibility and effectiveness of the proposed modeling method and algorithm. Moreover, the normalization coverage space and the minimum adjacent vector angle are proposed to evaluate the computational performance of NSDE-II. Finally, the potential engineering application value for the optimized 2RPU-RPS PM is presented.

Substantial changes resulting from the interaction of environmental and dietary factors contribute to an increased risk of obesity, while their specific associations with obesity remain unclear. Identify inflammation-related dietary patterns (DPs) and explore their associations with obesity among urbanized Tibetan adults under significant environmental and dietary changes.Totally, 1826 subjects from the suburbs of Golmud City were enrolled in an open cohort study, of which 514 were followed up. Height, weight, and waist circumference were used to define overweight and obesity. DPs were derived using reduced rank regression with 41 food groups as predictors and hs-CRP and prognostic nutritional index as inflammatory response variables. Altitude was classified as high or ultra-high. Two DPs were extracted. DP-1 was characterized by having high consumptions of sugar-sweetened beverages, savory snacks, and poultry, and a low intake of tsamba. DP-2 had high intakes of poultry, pork, animal offal, and fruits, and a low intake of butter tea. Participants in the highest tertiles (T3) of DPs had increased risks of overweight and obesity (DP-1: OR=1.37, 95% CI: 1.07, 1.77; DP-2: OR=1.48, 95% CI: 1.18, 1.85) than those in the lowest tertiles (T1). Participants in T3 of DP-2 had an increased risk of central obesity (OR=2.25, 95% CI: 1.49, 3.39) than those in T1. The positive association of DP-1 with overweight and obesity was only significant at high altitudes, while no similar effect was observed for DP-2. Inflammation-related DPs were associated with increased risks of overweight and/or obesity.

Prehistoric humans seem to have preferred inhabiting small river basins, which were closer in distance to most settlements compared to larger rivers. The Holocene landscape evolution is considered to have played a pivotal role in shaping the spatiotemporal patterns of these settlements. In this study, we conducted comprehensive research on the relationship between landscape evolution and settlement distribution within the Huangshui River basin, which is a representative small river in Central China with numerous early settlements, including a prehistoric city known as the Wangjinglou site (WJL). Using geoarchaeological investigations, optically stimulated luminescence dating, pollen analysis, and grain-size analysis, we analyzed the characteristics of the Holocene environment. The results indicate the presence of two distinct geomorphic systems, namely the red clay hills and the river valley. The red clay hills, formed in the Neogene, represent remnants of the Songshan piedmont alluvial fan that was eroded by rivers. There are three grades of terraces within the river valley. T3 is a strath terrace and formed around 8.0 ka. Both T2 and T1 are fill terraces, which were developed around 4.0 ka and during the historical period, respectively. The sedimentary features and pollen analysis indicate the existence of an ancient lake-swamp on the platform during 11.0–9.0 ka. This waterbody gradually shrank during 9.0–8.0 ka, and ultimately disappeared after 8.0 ka. Since then, the development of large-scale areas of water ceased on the higher geomorphic units. River floods also cannot reach the top of these high geomorphic units, where numerous prehistoric settlements are located, including the Xia–Shang cities of the WJL site. Our research demonstrates that landscape stability supported the long-term and sustainable development of ancient cultures and facilitated the establishment of the WJL ancient cities in the region.

Trioctahedral phyllosilicate minerals are widely distributed on the Earth’s surface, especially in soil. The mineral–water interfacial reaction of lizardite, chlorite and talc, with various structural properties (tetrahedral sheet, octahedral sheet, 1:1-type and 2:1-type interlayer domain/two-dimensional structural units), was carried out in sulfuric acid solution (1 mol L–1). The mineral samples were characterized by powder X-ray diffraction, Fourier-transform infrared spectroscopy, scanning and transmission electron microscopy and inductively coupled plasma mass spectrometry. The dissolution concentration, dissolution rate, dissolution rules and structural changes of the components during the dissolution processes of the various two-dimensional structural units were studied. The results show that the dissolution concentrations of Si and Mg in the sulfuric acid solution decrease in the following order: chlorite > lizardite > talc and lizardite > chlorite > talc. The dissolution rates of Si in chlorite and Mg in lizardite are the greatest, while talc is the most stable compared with lizardite and chlorite. With increasing interfacial reaction time and the dissolution of the ionic components of the minerals, the structure of lizardite is gradually destroyed; the structural destruction of chlorite is more obvious during the early stages of the reaction; and the structure of talc does not significantly change over the course of the entire reaction. By analysing the microtopography of the minerals, it was found that the structural failure of lizardite occurred from the surface to the interior. Chlorite had more structural defects and showed collapse of the layered structure during structural failure. The surface layer of talc decomposed by corrosion into a small lamellae structure attached to the surface, but there was no obvious structural change similar to those of lizardite and chlorite. The relationship between the evolution of composition and structure during the mineral–water interfacial reaction process with the two-dimensional structure layer type provides the mineralogical basis for studying the coupling mechanism of the migration and transformation of materials in key regions of the Earth.

A multifunctional optical diagnostic system, which includes an interferometer, a refractometer and a multi-frame shadowgraph, has been developed at the Shenguang-II upgrade laser facility to characterize underdense plasmas in experiments of the double-cone ignition scheme of inertial confinement fusion. The system employs a 266 nm laser as the probe to minimize the refraction effect and allows for flexible switching among three modes of the interferometer, refractometer and multi-frame shadowgraph. The multifunctional module comprises a pair of beam splitters that attenuate the laser, shield stray light and configure the multi-frame and interferometric modules. By adjusting the distance and angle between the beam splitters, the system can be easily adjusted and switched between the modes. Diagnostic results demonstrate that the interferometer can reconstruct electron density below 1019 cm–3, while the refractometer can diagnose density approximately up to 1020 cm–3. The multi-frame shadowgraph is used to qualitatively characterize the temporal evolution of plasmas in the cases in which the interferometer and refractometer become ineffective.

Serpentine is widely distributed in the regolith and occurs in different types (chrysotile, lizardite, antigorite). The physical and chemical processes such as composition dissolution and structure evolution of serpentine occur constantly under the action of aqueous solutions. Based on the similarities and differences of polysomic structures and properties of chrysotile (tubular shapes) and lizardite (flat structural layers), the mineral–water interfacial reaction of these two minerals was carried out in a sulfuric acid solution with a concentration of 1 mol L–1. The mineral samples were characterized by powder X-ray diffraction, Fourier-transform infrared spectroscopy, scanning and transmission electron microscopy, Brunauer–Emmett–Teller surface area analysis, magic angle spinning nuclear magnetic resonance, and inductively coupled plasma mass spectrometry. The Si, Mg, and Fe dissolution concentrations, dissolution rates, and dissolution rules and structural changes of chrysotile and lizardite were studied and compared. The results show that H+ is more aggressive toward lizardite in sulfuric acid solution. The dissolution rate of Si, Mg, and Fe was faster, the dissolution concentration was greater, and structural changes occurred preferentially in lizardite. Specifically, Mg dissolved first in the octahedral sheets, and Si and Fe dissolved later in the tetrahedral sheets. After the water interfacial reaction with the sulfuric acid solution, the ion dissolution rates of both chrysotile and lizardite were Mg > Fe > Si. In summary, this work investigates the mineral–water interfacial reaction of chrysotile and lizardite in sulfuric acid media from different crystal structures and demonstrates that the crystal structure has a significant effect on the acid reactivity of lizardite minerals. Furthermore, the crystal chemistry patterns for the structural dissociation of different two-dimensional structural units were studied. This work provides a mineralogical basis for the study of the mechanisms of ion migration and crystal-structure evolution of serpentine under acidic media.

A high-energy pulsed vacuum ultraviolet (VUV) solid-state laser at 177 nm with high peak power by the sixth harmonic of a neodymium-doped yttrium aluminum garnet (Nd:YAG) amplifier in a KBe2BO3F2 prism-coupled device was demonstrated. The ultraviolet (UV) pump laser is a 352 ps pulsed, spatial top-hat super-Gaussian beam at 355 nm. A high energy of a 7.12 mJ VUV laser at 177 nm is obtained with a pulse width of 255 ps, indicating a peak power of 28 MW, and the conversion efficiency is 9.42% from 355 to 177 nm. The measured results fitted well with the theoretical prediction. It is the highest pulse energy and highest peak power ever reported in the VUV range for any solid-state lasers. The high-energy, high-peak-power, and high-spatial-uniformity VUV laser is of great interest for ultra-fine machining and particle-size measurements using UV in-line Fraunhofer holography diagnostics.