We study household decision making in a high-stakes experiment with a random sample of households in rural China. Spouses have to choose between risky lotteries, first separately and then jointly. We find that spouses’ individual risk preferences are more similar the richer the household and the higher the wife’s relative income contribution. A couple’s joint decision is typically very similar to the husband’s preferences, but women who contribute relatively more to the household income, women in high-income households, and women with communist party membership have a stronger influence on the joint decision.

We report an experimental study of the formation and evolution of laminar thermal structures generated by a small heat source, with a focus on their correlation to the thermal boundary layer and effects of heating time $t_{heat}$. The experiments are performed over the flux Rayleigh number ($Ra_f$) range $2.1\times 10^6 \leq Ra_f \leq 3.6\times 10^{7}$ and the Prandtl number ($Pr$) range $28.6 \leq Pr \leq 904.7$. The corresponding Rayleigh number ($Ra= t_{heat}\,Ra_{f}/\tau _0\,Pr$) range is $900 \leq Ra \leq 4\times 10^{4}$, where $\tau _0$ is a diffusion time scale. For thermal structures generated by continuous heating (i.e. starting plumes), their formation process exists three characteristic times that are well reflected by changes in the thermal boundary layer thickness. These characteristic times, denoted as $t_{emit}$, $t_{recover}$ and $t_{static}$, correspond to the moments when the plume emission begins and completes, and when the thermal boundary layer becomes quasi-static, respectively. Their $Ra_f$–$Pr$ dependencies are found to be $t_{emit}/\tau _0\sim Ra_f^{-0.41}\,Pr^{0.41}$, $t_{recover}/\tau _0\sim Ra_f^{-0.48}\,Pr^{0.48}$ and $t_{static}/\tau _0\sim Ra_f^{-0.49}\,Pr^{0.33}$, respectively. Thermal structures generated by finite $t_{heat}$ exhibit similar evolution dynamics once $t_{heat} \ge t_{emit}$, with the accelerating stage behaving like starting plumes and the decay stage like thermals (i.e. a finite amount of buoyant fluids). It is further found that their maximum rising velocity experiences a transition in the $Ra$-dependence from $Ra$ to $(Ra\ln Ra)^{0.5}$ at $Ra \simeq 6000$; and their maximum acceleration reaches the value of starting plumes at $t_{heat}\simeq t_{recover}$, and remains unchanged for larger $t_{heat}$. In particular, the maximum rising velocity for the cases with $t_{heat} = t_{recover}$ follows a scaling relation $Ra_f^{0.37}\,Pr^{-0.37}$, in contrast to the relation $Ra_f^{0.48}\,Pr^{-0.48}$ for starting plumes. This study provides a more comprehensive understanding of laminar thermal structures, which are relevant to a range of processes in nature and laboratory systems such as Rayleigh–Bénard convection.

Adsorption of nanoparticles on minerals affects the fate and transport of nanoparticles directly and is of great significance to many fields, including research into ore deposits, geochemistry, the environment and mineral materials. Whereas many previous studies have been conducted under the equilibrium pH and low solid (mineral) to liquid (nanoparticle suspension) ratio conditions, adsorption processes under initial pH and high solid/liquid ratio conditions may represent many important yet underexamined complex scenarios. To fill in this research gap, the adsorption of gold nanoparticles on illite was investigated experimentally at a relatively high solid/liquid ratio of 5 g L–1 and the effects of initial pH, ionic strength, citrate concentration, temperature and illite particle size were evaluated. The adsorbed amount of gold nanoparticles (from <5% to nearly 100%) increased with increasing ionic strength, temperature and citrate concentration and decreased with increasing pH and illite particle size. The presence of illite resulted in the dynamic evolution of the pH of the suspension, which, along with solution chemistry parameters, controlled the electrostatic interaction of illite and gold nanoparticles. The adsorption results, scanning electron microscopy observations and surface properties of illite suggest that the negatively charged gold nanoparticles were adsorbed predominantly on the positive illite edges through electrostatic interaction. The electrostatic attraction between illite and gold nanoparticles appeared to be strong, supported by the minor amount of desorption. These research findings are expected to provide a valuable reference regarding many critical issues in the geosciences as well as for industrial applications.

Motivated by traffic congestion and air pollution, Beijing is one of several major cities to restrict vehicle ownership by requiring residents to win a lottery for the right to obtain an additional car. We examine the welfare cost of preventing people from owning cars because of misallocation: under a lottery, some individuals with low willingness to pay (WTP) for cars can obtain cars, while other individuals with high WTP cannot. We estimate welfare costs using a new contingent valuation method survey of Beijing lottery participants which we designed and conducted explicitly for this purpose. We find that restricting vehicle ownership reduced private welfare by 26 billion yuan. Back-of-the-envelope calculations suggest that the benefits of lower congestion and pollution roughly equal the costs. Our WTP estimates indicate a net welfare gain of approximately 32 billion yuan if Beijing’s lottery were replaced with an auction, which is similar to previous estimates.

This paper studies control function (CF) approaches in endogenous threshold regression where the threshold variable is allowed to be endogenous. We first use a simple example to show that the structural threshold regression (STR) estimator of the threshold point in Kourtellos, Stengos and Tan (2016, Econometric Theory 32, 827–860) is inconsistent unless the endogeneity level of the threshold variable is low compared to the threshold effect. We correct the CF in the STR estimator to generate our first CF estimator using a method that extends the two-stage least squares procedure in Caner and Hansen (2004, Econometric Theory 20, 813–843). We develop our second CF estimator which can be treated as an extension of the classical CF approach in endogenous linear regression. Both these approaches embody threshold effect information in the conditional variance beyond that in the conditional mean. Given the threshold point estimates, we propose new estimates for the slope parameters. The first is a by-product of the CF approach, and the second type employs generalized method of moment (GMM) procedures based on two new sets of moment conditions. Simulation studies, in conjunction with the limit theory, show that our second CF estimator and confidence interval for the threshold point together with the associated second GMM estimator and confidence interval for the slope parameter dominate the other methods. We further apply the new estimation methodology to an empirical application from international trade to illustrate its usefulness in practice.

The carbonate-hosted Pb–Zn deposits in the Sichuan–Yunnan–Guizhou (SYG) triangle region are important Indosinian deposits in South China. The Tianbaoshan deposit is a typical large Pb–Zn deposit in the SYG area and occurs as pipe-like type, hosted by Sinian dolostone. It contains ∼26 Mt Zn–Pb ore (7.76–10.09 % Zn, 1.28–1.50 % Pb and 93.6 g t−1 Ag) and >0.1 Mt Cu ore (2.55 % Cu). In this study, the detailed mineral textures, mineral chemical and sulphur isotopic compositions of the various sulphides have been analysed to constrain the abnormal enrichment mechanism and mineralization relationship. Four mineralization stages have been recognized: Stage 1, minor early pyrite (Py1) with relics and infill of intergranular dolomite or quartz grains; Stage 2, Cu mineralization with coarse-grained, elliptical crystal chalcopyrite (Cp1); (3) Stage 3, Zn mineralization with dark fine-grained sphalerite (Sph1) and light coarse-grained sphalerite (Sph2); and (4) Stage 4, as represented by a quartz–calcite assemblage with galena, minor pyrite (Py2) and chalcopyrite (Cp2). The petrography of the sulphide minerals (Py1, Cp1, Sph1 and Sph2) demonstrates a mutual inclusion relationship. The nature of this relationship from core to rim and their similar sulphur isotope values (5.5–8.3 ‰) indicates a single sulphur source, suggesting that the different mineralization types are the result of different stages of a continuous hydrothermal system. Sphalerite geothermometer study suggests that sphalerite in the Tianbaoshan deposit formed in a low-temperature (<200 °C) hydrothermal system. The low concentrations of Mn and In, low In/Ge ratios and high Fe/Cd ratios in the sphalerite are consistent with those of Mississippi Valley-type (MVT) deposits, but different from those of magmatism-related deposits (e.g. epithermal, skarn and VMS deposits). The positive δ34S values for Py1 (5.1–7.9 ‰), Cp1 (5.1–7.2 ‰), Sph1 (4.7–7.4 ‰), Sph2 (3.9–8.7 ‰), Py2 (4.4–9.3 ‰) and Cp2 (5.0–6.8 ‰) indicate a sulphur source from thermochemical reduction of coeval seawater sulphate. Widely developed dissolved textures (caverns and breccias) with massive sulphide infillings and deformed host rock remnants suggest that replacement of host dolostones by ore fluids was volumetrically significant and the ore formed nearly simultaneously with the cavities. The Tianbaoshan deposit is a typical MVT deposit, which resulted from mixing of a H2S-rich fluid and a metal-rich fluid, with thermochemical sulphate reduction occurring before ore precipitation rather than during ore precipitation.

We investigated the effects of botulinum toxin on gait in Parkinson’s disease (PD) patients with foot dystonia. Six patients underwent onabotulinum toxin A injection and were assessed by Burke–Fahn–Marsden Dystonia Rating Scale (BFMDRS), visual analog scale (VAS) of pain, Timed Up and Go (TUG), Berg Balance Test (BBT), and 3D gait analysis at baseline, 1 month, and 3 months. BFMDRS (p = 0.002), VAS (p = 0.024), TUG (p = 0.028), and BBT (p = 0.034) were improved. Foot pressures at Toe 1 (p = 0.028) and Midfoot (p = 0.018) were reduced, indicating botulinum toxin’s effects in alleviating the dystonia severity and pain and improving foot pressures during walking in PD.

Compared with commercial polyolefin membranes, polyacrylonitrile (PAN) membrane prepared by electrostatic spinning has higher porosity, electrolyte uptake, thermal stability, and lithium-ion conductivity, etc. However, poor mechanical performance has largely limited the application of electrospun PAN separators. In this study, PAN/polyimide (PI) composite membrane is prepared by electrostatic spinning to improve the mechanical and electrochemical performances. Scanning electron microscopy, thermal analysis method, and electrochemical methods were used for evaluation of the electrospun composite membrane. The results show that the composite membrane possesses good thermal stability and exhibits better mechanical performance than pristine PAN membrane (increasing by 1.1 times in tension strength). The addition of PI can increase porosity and fluid absorption rate obviously. In addition, the composite membrane has high ionic conductivity (18.77 × 10−4 S/cm), wide electrochemical window (about 4.0 V), and excellent cycling performance. It can retain a discharge specific capacity of 153 mA h/g even after 50 cycles at 0.5 C. The electrospun PAN/PI membrane may be a promising candidate for lithium-ion battery separators.

This study investigated the effect of pre-exercise α-lactalbumin ingestion on subsequent endurance exercise performance, muscle pain and mood states. In a two-stage cross-over counterbalance design, eleven male endurance runners (age: 31 (se 2) years, height: 169·5 (se 4·4) cm, weight: 63·6 (se 5·1) kg, V̇O2max: 58·8 (se 6·3) ml/kg per min) consumed two solutions (carbohydrate+α-lactalbumin, CA; carbohydrate+whey protein isolate, CW) 2 h before a self-paced 21-km run. Creatine kinase, IL-6, muscle pain, pressure pain threshold (PPT) and mood states were assessed 2 h before exercise, immediately before exercise (Pre-ex0) and immediately after exercise (Post-ex0). No difference was found in 21-km running performance between two trials (CA v. CW: 115·85 (se 5·20) v. 118·85 (se 5·51) min, P=0·48). Compared with CW, CA led to higher PPT at Pre-ex0 (41·77 (se 2·27) v. 35·56 (se 2·10) N/cm2, P<0·01) and Post-ex0 (38·76 (se 3·23) v. 35·30 (se 3·55) N/cm2, P=0·047). Compared with CW, CA reduced the feeling of fatigue at Post-ex0 (P<0·01); CA also reduced salivary cortisol levels at Post-ex0 (0·72 (se 0·07) v. 0·83 (se 0·13) ng/ml, P<0·01). In conclusion, the ingestion of α-lactalbumin did not improve the 21-km time-trial performance. However, compared with the pre-exercise ingestion of whey protein, that of α-lactalbumin led to superior results during similar levels of endurance exercise: it elevated PPT and reduced the feeling of fatigue and the cortisol levels.

Coal has fueled China's rapid growth in recent decades, but it also severely pollutes the air and causes many health issues. The magnitude of the health damage caused by air pollution depends on the location of emission sources. In this paper, we look into the spatial distribution of coal-fired power plants, which are the major emission sources in China, and investigate the determining factors behind the distribution. We find that the driving factors are economic development and expansion of electricity grid coverage; the latter factor plays a key role in provinces that are less developed but have abundant coal resources. This suggests a way to reduce health damages caused by air pollution without harming the economy: attracting coal-fired plants to less populated areas by developing trans-province electricity trade and grid coverage.

Two new species of Nilssoniopteris of the order Bennettitales, Nilssoniopteris hamiensis Zhao and Deng, new species and Nilssoniopteris crassiaxis Zhao and Deng, new species, are established from the Xishanyao Formation (Middle Jurassic) of Sandaoling Coal Mine in Hami, Xinjiang, China, based on leaf macromorphology and cuticular features. Nilssoniopteris hamiensis n. sp. is characterized by its varied leaf shapes and trichome bases of 1–4 cells on the abaxial epidermis. Nilssoniopteris crassiaxis n. sp. is characterized by its broad midrib (especially near the leaf base) and trichome bases of 1–3 cells on the abaxial epidermis. Both species possess unique venation patterns that are not only simple and free, but also forked and merged to form closed loops. These anastomosing veins are even more complicated in N. crassiaxis n. sp. in that the veins can fork once, twice, or even three times, the forked veins can later merge with each other or with an adjacent vein to form a closed loop, which may later further disjoin. The generic diagnosis of Nilssoniopteris is thus accordingly emended, particularly in the venation pattern. In addition, the stratigraphic and geographical distributions of all 45 Jurassic Nilssoniopteris species worldwide have been summarized and analyzed to better understand their brief evolutionary history, indicating that Nilssoniopteris might be able to grow not only in subtropical regions as the living cycads are, but also in warm climatic regions.

Halloysite nanotubes (HNTs)/polytetrafluoroethylene (PTFE) nanocomposites were prepared by the cold compression moulding method. The effects of addition of HNTs (HNTs ‘filling’) on the performances of PTFE were explored using X-ray diffraction, Fourier Transform infrared spectroscopy, scanning electron microscopy and thermogravimetric analysis which showed that HNTs were well dispersed in the PTFE matrix by means of physical mixing at lower contents of 2–5 wt.%; the introduction of HNTs into PTFE could improve the heat stability of the PTFE. Furthermore, the mechanical and tribological performances of the nanocomposites were measured to examine the filling effect. The tensile strength of the HNTs/PTFE nanocomposites at 2–5 wt.% HNTs content increased by ~3.5% while their wear rates decreased by 55–90% relative to pure PTFE, clear proof of the filling effect of HNTs with a high aspect ratio.

This study is the eighth in a series of stated-preference studies designed to enhance the basis for international benefits transfer of value of statistical life (VSL) estimates. The series has fielded essentially similar stated-preference surveys in Canada, China, France, Italy, Japan, Mongolia, the United Kingdom, and the United States. This Chinese study estimates the willingness to pay for contemporaneous and future mortality risk reductions of residents of Shanghai, Jiujiang, and Nanning, China using a stated-preference payment-card survey. The pooled VSL for a contemporaneous reduction in annual mortality risk reduction of 5 in 10,000 is about 1.47 million 2009 yuan ($614,805 U.S. $2016), with income elasticities of 0.2 to 0.25. This VSL estimate is at the lower end of estimates from the eight countries, between those from Mongolia and Japan, and in the mid-range of estimates of willingness to pay (WTP) for mortality risk reductions as a percentage of household income. We find lower discount rates in the Mongolia, Japan, and China studies than in those fielded in North America or Europe. The study also explores the relative performance of dichotomous choice and stated-preference card elicitation methods in a middle income country setting and develops a computerized “payment card” that allows testing for anchoring. Implicit transfer elasticities across countries, calculated using the VSLs we estimate and each country’s income, relative to those of the United States, yields estimates of 0.88–0.95 for the lower income countries. These compare with the default assumption of 1.0 or assumed elasticities of 1.2 for developing countries.

X-ray powder diffraction data, unit-cell parameters, and space group for thiamphenicol, C12H15Cl2NO5S, are reported [a = 17.346(3), b = 15.341(0), c = 5.790 (2) Å, α = β = γ = 90°, unit-cell volume V = 1540.8(3) Å3, Z = 4, and space group P212121]. All measured lines were indexed and are consistent with the P212121 space group. No detectable impurities were observed.