Characterised by the extensive use of obsidian, a blade-based tool inventory and microblade technology, the late Upper Palaeolithic lithic assemblages of the Changbaishan Mountains are associated with the increasingly cold climatic conditions of Marine Isotope Stage 2, yet most remain poorly dated. Here, the authors present new radiocarbon dates associated with evolving blade and microblade toolkits at Helong Dadong, north-east China. At 27 300–24 100 BP, the lower cultural layers contain some of the earliest microblade technology in north-east Asia and highlight the importance of the Changbaishan Mountains in understanding changing hunter-gatherer lifeways in this region during MIS 2.

We report an experimental study of the formation and evolution of laminar thermal structures generated by a small heat source, with a focus on their correlation to the thermal boundary layer and effects of heating time $t_{heat}$. The experiments are performed over the flux Rayleigh number ($Ra_f$) range $2.1\times 10^6 \leq Ra_f \leq 3.6\times 10^{7}$ and the Prandtl number ($Pr$) range $28.6 \leq Pr \leq 904.7$. The corresponding Rayleigh number ($Ra= t_{heat}\,Ra_{f}/\tau _0\,Pr$) range is $900 \leq Ra \leq 4\times 10^{4}$, where $\tau _0$ is a diffusion time scale. For thermal structures generated by continuous heating (i.e. starting plumes), their formation process exists three characteristic times that are well reflected by changes in the thermal boundary layer thickness. These characteristic times, denoted as $t_{emit}$, $t_{recover}$ and $t_{static}$, correspond to the moments when the plume emission begins and completes, and when the thermal boundary layer becomes quasi-static, respectively. Their $Ra_f$–$Pr$ dependencies are found to be $t_{emit}/\tau _0\sim Ra_f^{-0.41}\,Pr^{0.41}$, $t_{recover}/\tau _0\sim Ra_f^{-0.48}\,Pr^{0.48}$ and $t_{static}/\tau _0\sim Ra_f^{-0.49}\,Pr^{0.33}$, respectively. Thermal structures generated by finite $t_{heat}$ exhibit similar evolution dynamics once $t_{heat} \ge t_{emit}$, with the accelerating stage behaving like starting plumes and the decay stage like thermals (i.e. a finite amount of buoyant fluids). It is further found that their maximum rising velocity experiences a transition in the $Ra$-dependence from $Ra$ to $(Ra\ln Ra)^{0.5}$ at $Ra \simeq 6000$; and their maximum acceleration reaches the value of starting plumes at $t_{heat}\simeq t_{recover}$, and remains unchanged for larger $t_{heat}$. In particular, the maximum rising velocity for the cases with $t_{heat} = t_{recover}$ follows a scaling relation $Ra_f^{0.37}\,Pr^{-0.37}$, in contrast to the relation $Ra_f^{0.48}\,Pr^{-0.48}$ for starting plumes. This study provides a more comprehensive understanding of laminar thermal structures, which are relevant to a range of processes in nature and laboratory systems such as Rayleigh–Bénard convection.

This study gives insights into the interfacial instabilities of a ventilation cavity by injecting gas vertically into the horizontal liquid crossflow through both numerical and experimental investigations. We identified four distinct regimes of the ventilation cavity based on their topological characteristics: (I) discrete bubble, (II) continuous cavity, (III) bifurcated cavity, and (IV) bubble plume. The boundaries for these regimes are delineated within the parameter space of crossflow velocity and jet speed. A comprehensive analysis of the flow characteristics associated with each regime is presented, encompassing the phase mixing properties, the dominant frequency of pulsation, and the time-averaged profile of the cavity. This study conducted a detailed investigation of the periodic pulsation at the leading-edge interface of the cavity, also known as the ‘puffing phenomenon’. The results of local spectral analysis and dynamic mode decomposition indicate that the high-frequency instability in the near-field region exhibits the most significant growth rate. In contrast, the low-frequency mode with the largest amplitude spans a broader region from the orifice to the cavity branches. A conceptual model has been proposed to elucidate the mechanism behind the pulsation phenomenon observed along the cavity interface: the pulsation results from the alternate intrusion of the crossflow and the cavity recovery at the leading edge, being governed mainly by the periodic oscillating imbalance between the static pressure of gas near the orifice and the stagnation pressure of crossflow at the leading edge.

Sulfonated carbon is a ‘green,’ solid-acid catalyst. For applications purposes, its surface area needs to be improved and its preparation needs to be made environmentally friendly. The objective of the present study was to provide a green and economical method of preparing a sulfonated carbon catalyst by using palygorskite (Plg) fiber as a support for sulfonated carbon. Sulfonated carbon/palygorskite solid-acid catalyst (SC-Plg) was synthesized via one-step carbonization-sulfonation by mixing palygorskite with sucrose as the carbon source and p-toluenesulfonic acid as the sulfonating agent. The catalyst was characterized by SEM, EDX, TEM, FTIR, and nitrogen adsorption-desorption isotherms. The results indicated that sucrose-derived carbon was loaded uniformly on the surface of Plg fibers and formed the SC-Plg catalyst. The inexpensive Plg fibers could replace sucrose-derived carbon and increase the surface area of the resulting catalyst. The SC-Plg shows significant catalytic performance and excellent stability when used in the esterification of oleic acid with methanol. The conversion of oleic acid reached 68.09%, even after five cycles. This work paves the way for the development of highly active, carbon-based, solid-acid composite catalysts using a natural Plg nanofiber template.

Xiaonanshan is an archaeological site dated to 16.5–13.5 cal kyr BP, situated beside the Ussuri River in China. The lithic assemblages feature microblade debitage, bifacial points and stone adzes, which provide important new materials for this project to explore Neolithisation in the Amur River basin of northeast Asia.

In 2016, an outbreak of paratyphoid fever occurred in 40 cases at Qingyang town, in China. A case-control study was carried out to determine the source of this outbreak. Case-control study was conducted to identify the risk factors of this outbreak. The cases were identified as patients with isolation of S. Paratyphi, controls were confirmed cases’ healthy classmates, colleagues or neighbors and matched by age (±5 y) and gender. Pulsed-field gel electrophoresis was performed to source tracking. Totally, 40 cases were reported: 24 cases were students, and 20 (20/24) of them were Qingyang High School students. For the case-control study, consuming Chinese egg pancakes was detected as a risk factor (OR1:1 = 5.000; 95% CI: 1.710-14.640), and hand-washing before meals was protective behavior compared with seldom hand-washing (OR1:1 = 23.256; 95% CI: 2.451-200.000). S. Paratyphi was cultured from a well water sample used for washing contents of the pancakes. Isolates from well water and paratyphoid cases showed the same PFGE patterns. Contaminated well water and Chinese egg pancakes were likely source and vehicle of this outbreak. Health education, especially handwashing, and food safety supervision should be promoted particularly in schools.

A linearly polarized Laguerre–Gaussian (LP-LG) laser beam with a twist index $l = -1$ has field structure that fundamentally differs from the field structure of a conventional linearly polarized Gaussian beam. Close to the axis of the LP-LG beam, the longitudinal electric and magnetic fields dominate over the transverse components. This structure offers an attractive opportunity to accelerate electrons in vacuum. It is shown, using three-dimensional particle-in-cell simulations, that this scenario can be realized by reflecting an LP-LG laser off a plasma with a sharp density gradient. The simulations indicate that a 600 TW LP-LG laser beam effectively injects electrons into the beam during the reflection. The electrons that are injected close to the laser axis experience a prolonged longitudinal acceleration by the longitudinal laser electric field. The electrons form distinct monoenergetic bunches with a small divergence angle. The energy in the most energetic bunch is 0.29 GeV. The bunch charge is 6 pC and its duration is approximately $270$ as. The divergence angle is just ${0.57}^{\circ }$ (10 mrad). By using a linearly polarized rather than a circularly polarized Laguerre–Gaussian beam, our scheme makes it easier to demonstrate the electron acceleration experimentally at a high-power laser facility.

The essence of sub-critical transition of oscillatory boundary-layer flows is the non-modal growth of finite-amplitude disturbances. The current understanding of the mechanisms of the orderly and bypass transitions of oscillatory boundary-layer flows is limited. The present study adopts optimisation approaches to predict the maximum energy amplification of two- and three-dimensional perturbations in response to the optimal initial disturbance with or without external forcing. A series of direct numerical simulations are also performed to compare with the results obtained from the stability analyses. In particular, the optimal initial perturbation similar to a Tollmien–Schlichting (T–S) wave yields the largest transient growth under the combined effects of the Orr mechanism and inflectional point instability. With a considerable level of two-dimensional disturbance, the vortex tube nonlinearly develops from the T–S-like wave, and then either deforms into a $\varLambda$-vortex in the near-wall region or rolls up to the free shear region. The further burst of turbulence can follow the first pathway as K-type transition or the second one as vortex tube breakdown due to the elliptical instability. Additionally, non-modal growth can initiate the inception of streaky structures by favourable three-dimensional initial perturbations and/or forcing. The secondary instabilities responsible for the streak breakdown are classified as the varicose (symmetric) and sinuous (anti-symmetric) modes. Under a sufficiently high level of three-dimensional disturbance, the bypass transition is predominantly characterised by the formation of the sinuous mode and turbulent spots, which leads to the suppression of inflection point instability.

In this study, we focus on the significant upward trend of occupational accidental traffic injuries in commercial couriers during the coronavirus disease (COVID-19) pandemic. This review comments on the characteristics of occupational accidental injuries of commercial couriers in China and then discusses the reasons of the high incidence rate and associated risk factors. Various potential protective measures were also explored to prevent and control the occupational injuries in this vulnerable worker group.

For individual cultures, findings on regulating embryo density by changing the microdrop volume are contradictory. The aim of this study was to investigate the relationship between embryo density and the developmental outcome of day 3 embryos after adjusting covariates. In total, 1196 embryos from 206 couples who had undergone in vitro fertilization treatment were analyzed retrospectively. Three embryo densities were used routinely, i.e. one embryo in a drop (30 μl/embryo), two embryos in a drop (15 μl/embryo) and three embryos in a drop (10 μl/embryo). Embryo quality on day 3 was evaluated, both the cell number of day 3 embryos and the proportion of successful implantations served as endpoints. Maternal age, paternal age, antral follicles and level of anti-Müllerian hormone, type of infertility, controlled ovarian stimulation protocol, length of stimulation, number of retrieved oocytes, number of zygotes (two pronuclei) and insemination type were covariates and adjusted. After adjusting fully for all covariates, the cell number of day 3 embryos was significantly increased by 0.40 (95% CI 0.00, 0.79; P = 0.048) and 0.78 (95% CI 0.02, 1.54; P = 0.044) in the 15 μl/embryo and 10 μl/embryo group separately, compared with the 30 μl/embryo group. The proportions of implanted embryos were 42.1%, 48.7% and 0.0% in the 30 μl/embryo, 15 μl/embryo and 10 μl/embryo groups respectively. There was no statistical significance (P = 0.22) between the 30 μl/embryo group and the 15 μl/embryo group. After adjusting for confounders that were significant in univariate analysis, embryo density was still not associated with day 3 embryo implantation potential (P > 0.05). In a 30-μl microdrop, culturing embryos with an embryo density of both 15 and 10 μl/embryo increased the cell number of day 3 embryos, which did not benefit embryo implanting potential, compared with individual culture of 30 μl/embryo.

No relevant studies have yet been conducted to explore which measurement can best predict the survival time of patients with cancer cachexia. This study aimed to identify an anthropometric measurement that could predict the 1-year survival of patients with cancer cachexia. We conducted a nested case–control study using data from a multicentre clinical investigation of cancer from 2013 to 2020. Cachexia was defined using the Fearon criteria. A total of 262 patients who survived less than 1 year and 262 patients who survived more than 1 year were included in this study. Six candidate variables were selected based on clinical experience and previous studies. Five variables, BMI, mid-arm circumference, mid-arm muscle circumference, calf circumference and triceps skin fold (TSF), were selected for inclusion in the multivariable model. In the conditional logistic regression analysis, TSF (P = 0·014) was identified as a significant independent protective factor. A similar result was observed in all patients with cancer cachexia (n 3084). In addition, a significantly stronger positive association between TSF and the 1-year survival of patients with cancer cachexia was observed in participants aged > 65 years (OR: 0·94; 95 % CI 0·89, 0·99) than in those aged ≤ 65 years (OR: 0·96; 95 % CI 0·93, 0·99; Pinteraction = 0·013) and in participants with no chronic disease (OR: 0·92; 95 % CI 0·87, 0·97) than in those with chronic disease (OR: 0·97; 95 % CI 0·94, 1·00; Pinteraction = 0·049). According to this study, TSF might be a good anthropometric measurement for predicting 1-year survival in patients with cancer cachexia.

Shear dilatation/contraction of granular materials has long been recognized as an important process in granular flows but a comprehensive theoretical description of this process for a wide range of shear rates is not yet available. In this paper, a theoretical formulation of dilatation/contraction is proposed for continuum modelling of granular flows, in which the dilatation/contraction effects consist of a frictional component, which results from the rearrangement of enduring-contact force chains among particles, and a collisional component, which arises from inter-grain collisions. In this formulation, a frictional solid pressure, which considers the rearrangement of contact force chains under shear deformation, is proposed for the frictional dilatation/contraction, while well-established rheological laws are adopted for the collisional inter-grain pressure to account for the collisional dilatancy effect. The proposed formulation is first verified analytically by describing the shear-weakening behaviour of granular samples in a torsional shear rheometer and by capturing the incipient failure of both dry and immersed granular slopes. The proposed dilatation/contraction formulation is then further validated numerically by integrating it into a two-fluid continuum model and applying the model to study the collapse of submerged granular columns, in which the dilatation/contraction plays a critical role.

The upsurge in the number of people affected by the COVID-19 is likely to lead to increased rates of emotional trauma and mental illnesses. This article systematically reviewed the available data on the benefits of interventions to reduce adverse mental health sequelae of infectious disease outbreaks, and to offer guidance for mental health service responses to infectious disease pandemic. PubMed, Web of Science, Embase, PsycINFO, WHO Global Research Database on infectious disease, and the preprint server medRxiv were searched. Of 4278 reports identified, 32 were included in this review. Most articles of psychological interventions were implemented to address the impact of COVID-19 pandemic, followed by Ebola, SARS, and MERS for multiple vulnerable populations. Increasing mental health literacy of the public is vital to prevent the mental health crisis under the COVID-19 pandemic. Group-based cognitive behavioral therapy, psychological first aid, community-based psychosocial arts program, and other culturally adapted interventions were reported as being effective against the mental health impacts of COVID-19, Ebola, and SARS. Culturally-adapted, cost-effective, and accessible strategies integrated into the public health emergency response and established medical systems at the local and national levels are likely to be an effective option to enhance mental health response capacity for the current and for future infectious disease outbreaks. Tele-mental healthcare services were key central components of stepped care for both infectious disease outbreak management and routine support; however, the usefulness and limitations of remote health delivery should also be recognized.

In order to clarify fine structures of the hypothetical meridian conduits of Chinese traditional medicine (CTM) in the skin, the present study used light and transmission electron microscopy to examine fasciae in different vertebrate species. Collagen fiber bundles and layers were arranged in a crisscross pattern, which developed into a special tissue micro-channel (TMC) network, in a manner that was analogs to the proposed skin meridian conduits. It was further revealed that tissue fluid in lateral TMC branches drained into wide longitudinal channels, which were distinctly different from lymphatic capillary. Mast cells, macrophages, and extracellular vesicles such as ectosomes and exosomes were distributed around telocytes (TCs) and their long processes (Telopodes, Tps) within the TMC. Cell junctions between TCs developed, which could enable the communication between contiguous but distant Tps. On the other hand, winding free Tps without cell junctions were also uncovered inside the TMC. Tissue fluid, cell junctions of TCs, mast cells, macrophages, and extracellular vesicles within the TMC corresponded to the circulating “气血” (“Qi-Xue”, i.e., information, message, and energy) of meridian conduits at the cytological level. These results could provide morphological evidence for the hypothesis that “meridians are the conduit for Qi-Xue circulation” in CTM.