Systematically monitoring the baseline sensitivity of troublesome weeds to herbicides is a crucial step in the early detection of their market lifespan. Florpyrauxifen-benzyl is one of the most important herbicides used in rice production throughout the world, and has been used for 5 yr in China. Barnyardgrass is one of the main targeted weed species of florpyrauxifen-benzyl. In total, 114 barnyardgrass populations were collected from rice fields in Jiangsu Province, China, and using whole-plant bioassays they were screened for susceptibility to florpyrauxifen-benzyl. The GR50 values (representing the dose that causes a 50% reduction in fresh weight of aboveground parts) of florpyrauxifen-benzyl for all populations ranged from 1.0 to 34.5 g ai ha−1, with an average of 6.8 g ai ha−1, a baseline sensitivity dose of 3.3 g ai ha−1, and a baseline sensitivity index of 34.5. Twenty-one days after treatment with florpyrauxifen-benzyl at the labeled dose (36 g ai ha−1), 90% of the barnyardgrass populations exhibited >95% reductions in fresh weight of aboveground parts. Compared with the baseline sensitivity dose, 63, 44, and 7 populations had, respectively, no resistance (55%), low resistance (39%), and moderate resistance (6%) to florpyrauxifen-benzyl. Furthermore, the GR50 distribution of barnyardgrass populations did not show a significant correlation with collection location, planting method (direct-seeding or transplanting), or rice species (Oryza sativa L. ssp. indica or ssp. japonica) at any of rice fields where seeds had been collected (P > 0.05). In conclusion, florpyrauxifen-benzyl remains effective for barnyardgrass control in rice fields despite serious resistance challenges.

Human alveolar echinococcosis is a hard-to-treat and largely untreated parasitic disease with high associated health care costs. The current antiparasitic treatment for alveolar echinococcosis relies exclusively on albendazole, which does not act parasiticidally and can induce severe adverse effects. Alternative, and most importantly, improved treatment options are urgently required. A drug repurposing strategy identified the approved antimalarial pyronaridine as a promising candidate against Echinococcus multilocularis infections. Following a 30-day oral regimen (80 mg kg−1 day−1), pyronaridine achieved an excellent therapeutic outcome in a clinically relevant hepatic alveolar echinococcosis murine model, showing a significant reduction in both metacestode size (72.0%) and counts (85.2%) compared to unmedicated infected mice, which revealed significantly more potent anti-echinococcal potency than albendazole treatment at an equal dose (metacestode size: 42.3%; counts: 4.1%). The strong parasiticidal activity of pyronaridine was further confirmed by the destructive damage to metacestode tissues observed morphologically. In addition, a screening campaign combined with computational similarity searching against an approved drug library led to the identification of pirenzepine, a gastric acid-inhibiting drug, exhibiting potent parasiticidal activity against protoscoleces and in vitro cultured small cysts, which warranted further in vivo investigation as a promising anti-echinococcal lead compound. Pyronaridine has a known drug profile and a long track record of safety, and its repurposing could translate rapidly to clinical use for human patients with alveolar echinococcosis as an alternative or salvage treatment.

Depression is highly prevalent in haemodialysis patients, and diet might play an important role. Therefore, we conducted this cross-sectional study to determine the association between dietary fatty acids (FA) consumption and the prevalence of depression in maintenance haemodialysis (MHD) patients. Dietary intake was assessed using a validated FFQ between December 2021 and January 2022. The daily intake of dietary FA was categorised into three groups, and the lowest tertile was used as the reference category. Depression was assessed using the Patient Health Questionnaire-9. Logistic regression and restricted cubic spline (RCS) models were applied to assess the relationship between dietary FA intake and the prevalence of depression. As a result, after adjustment for potential confounders, a higher intake of total FA [odds ratio (OR)T3 vs. T1 = 1·59, 95 % confidence interval (CI) = 1·04, 2·46] and saturated fatty acids (SFA) (ORT3 vs. T1 = 1·83, 95 % CI = 1·19, 2·84) was associated with a higher prevalence of depressive symptoms. Significant positive linear trends were also observed (P < 0·05) except for SFA intake. Similarly, the prevalence of depression in MHD patients increased by 20% (OR = 1.20, 95% CI = 1.01–1.43) for each standard deviation increment in SFA intake. RCS analysis indicated an inverse U-shaped correlation between SFA and depression (Pnonlinear > 0·05). Additionally, the sensitivity analysis produced similar results. Furthermore, no statistically significant association was observed in the subgroup analysis with significant interaction. In conclusion, higher total dietary FA and SFA were positively associated with depressive symptoms among MHD patients. These findings inform future research exploring potential mechanism underlying the association between dietary FA and depressive symptoms in MHD patients.

Metabolic-associated fatty liver disease (MAFLD) has been proposed to replace the term non-alcoholic fatty liver disease (NAFLD) in 2020. The association between micronutrients and MAFLD has not been reported. Therefore, this study aims to explore the association between micronutrients intake and MAFLD. This was a cross-section study based on the National Health and Nutrition Examination Survey (NHANES). The dietary intake of copper, zinc, iron, and selenium was evaluated using the 24-h dietary recall interview. Logistic regression analysis was used to explore the association between micronutrients and MAFLD, and the results were shown as odds ratio (OR) with 95 % confidence intervals (CIs). A total of 5976 participants were finally included for analysis, with 3437 participants in the MAFLD group. After adjusting potential confounders, copper intake at quartile Q3 (OR = 0⋅68, 95 % CI 0⋅50, 0⋅93) and Q4 (OR = 0⋅60, 95 % CI 0⋅45, 0⋅80) was found to be associated with lower odds of MAFLD. Iron intake at Q2 (OR = 0⋅64, 95 % CI 0⋅45, 0⋅92) and Q3 (OR = 0⋅61, 95 % CI 0⋅41, 0⋅91) was associated with the lower odds of MAFLD. Our findings found that high intake of copper and adequate intake of iron were associated with MAFLD, which may provide guidance for the management of MAFLD.

It has been suggested that added sugar intake is associated with non-alcoholic fatty liver disease (NAFLD). However, previous studies only focused on sugar-sweetened beverages; the evidence for associations with total added sugars and their sources is scarce. This study aimed to examine the associations of total added sugars, their physical forms (liquid v. solid) and food sources with risk of NAFLD among adults in Tianjin, China. We used data from 15 538 participants, free of NAFLD, other liver diseases, CVD, cancer or diabetes at baseline (2013–2018 years). Added sugar intake was estimated from a validated 100-item FFQ. NAFLD was diagnosed by ultrasonography after exclusion of other causes of liver diseases. Multivariable Cox proportional hazards models were fitted to calculate hazard ratios (HR) and corresponding 95 % CI for NAFLD risk with added sugar intake. During a median follow-up of 4·2 years, 3476 incident NAFLD cases were documented. After adjusting for age, sex, BMI and its change from baseline to follow-up, lifestyle factors, personal and family medical history and overall diet quality, the multivariable HR of NAFLD risk were 1·18 (95 % CI 1·06, 1·32) for total added sugars, 1·20 (95 % CI 1·08, 1·33) for liquid added sugars and 0·96 (95 % CI 0·86, 1·07) for solid added sugars when comparing the highest quartiles of intake with the lowest quartiles of intake. In this prospective cohort of Chinese adults, higher intakes of total added sugars and liquid added sugars, but not solid added sugars, were associated with a higher risk of NAFLD.

Transmission of varicella occurs frequently in schools and households. We investigated the characteristics of varicella cases derived from within-household transmission and the modes of varicella transmission between school and household settings in Shanghai, China, from 2009 to 2018. Within-household transmission occurred in 278 households, of which 134 transmission events were between children. Sixty-one household varicella transmission events may be attributed to isolation procedures for infected students during school outbreaks, and 7.6% of school outbreaks were caused by schoolchildren cases derived from within-household transmission. The frequency of ‘school-household-school’ transmission adds an additional layer of complexity to the control of school varicella outbreaks. Administration of varicella vaccine as post-exposure prophylaxis after exposure is considered to be an effective measure to control varicella spread within households and schools.

The development of GaN-on-diamond devices offers bright prospects for the creation of high-power density electronics. This article presents a process of fabricating GaN-on-diamond structure by depositing diamond films on dual sides, including heat dissipation diamond film and sacrificial carrier diamond film. Prior to heat dissipation diamond film layer preparation, aluminum nitride (AlN) is chosen as a dielectric layer and pretreated by nanodiamond (ND) particles, to enhance the nucleation density. Zeta potential measurements and X-ray photoelectron spectroscopy are used to analyze the AlN surface after each treatment. The results show that oxygen-terminated ND particles tend to adhere to an AlN surface because the oxygen-terminated NDs have –COOH and –OH groups, and hold a negative potential. On the contrary, fluorine-terminated AlN prefers to attract the hydrogen-terminated ND seeds, which resulted in higher diamond nucleation density. Based on this preliminary study, a dense high-quality GaN-on-diamond wafer is successfully produced by using AlN as the dielectric layer and a diamond film as the sacrificial carrier.

We incorporate deep learning (DL) into tiled aperture coherent beam combining (CBC) systems for the first time, to the best of our knowledge. By using a well-trained convolutional neural network DL model, which has been constructed at a non-focal-plane to avoid the data collision problem, the relative phase of each beamlet could be accurately estimated, and then the phase error in the CBC system could be compensated directly by a servo phase control system. The feasibility and extensibility of the phase control method have been demonstrated by simulating the coherent combining of different hexagonal arrays. This DL-based phase control method offers a new way of eliminating dynamic phase noise in tiled aperture CBC systems, and it could provide a valuable reference on alleviating the long-standing problem that the phase control bandwidth decreases as the number of array elements increases.

Evaluation of Cr, Mn, Fe, Zn and Se in humans is challenged by the potentially high within-individual variability of these elements in biological specimens, which are poorly characterised. This study aimed to evaluate their within-day, between-day and between-month variability in spot samples, first-morning voids and 24-h collections. A total of 529 spot urine samples (including eighty-eight first-morning voids and 24-h collections) were collected from eleven Chinese adult men on days 0, 1, 2, 3, 4, 30, 60 and 90 and analysed for these five elements using inductively coupled plasma-MS. Intraclass correlation coefficients (ICC) were utilised to characterise the reproducibility, and their sensitivity and specificity were analysed to assess how well a single measurement classified individuals’ 3-month average exposures. Serial measurements of Zn in spot samples exhibited fair to good reproducibility (creatinine-adjusted ICC = 0·47) over five consecutive days, which became poor when the samples were gathered months apart (creatinine-adjusted ICC = 0·33). The reproducibility of Cr, Mn, Fe and Se in spot samples was poor over periods ranging from days to months (creatinine-adjusted ICC = 0·01–0·12). Two spot samples were sufficient for classifying 60 % of the men who truly had the highest (top 33 %) 3-month average Zn concentrations; for Cr, Mn, Fe and Se, however, at least three specimens were required to achieve similar sensitivities. In conclusion, urinary Cr, Mn, Fe, Zn and Se concentrations showed a strong within-individual variability, and a single measurement is not enough to efficiently characterise individuals’ long-term exposures.

Underground Nuclear Astrophysics in China (JUNA) will take the advantage of the ultra-low background in Jinping underground lab. High current accelerator with an ECR source and detectors were commissioned. JUNA plans to study directly a number of nuclear reactions important to hydrostatic stellar evolution at their relevant stellar energies. At the first period, JUNA aims at the direct measurements of 25Mg(p,γ)26 Al, 19F(p,α) 16 O, 13C(α, n) 16O and 12C(α,γ) 16O near the Gamow window. The current progress of JUNA will be given.

The aluminothermic reduction and nitridation method using microsized Al powder and nanosized alumina powder was employed to fabricate AlON powder under N2 atmosphere. Single-phase aluminum oxynitride (AlON) can be prepared at a relatively low temperature (1700 °C) with a holding time of 3 h. The powder is ball milled, doped with different amounts of Y2O3 (0.1–0.9 wt%) as a sintering additive, and then shaped into pellets. The pellet sintering is carried out at two relatively low temperatures (1860 and 1880 °C) for 10 h. The transmittance and hardness of the obtained samples varies as the amount of Y2O3 varies. The sample sintered under optimal conditions can reach an ultimate transmittance of 65% with 2 mm thickness. The Vickers hardness of highly transparent AlON ceramic is about 15.95 ± 0.17 GPa, indicating that our method has a promising future in transparent AlON ceramic production. The sintering promoting mechanisms of Y2O3 are also discussed in detail.

The high repetition rate 10 J/10 ns Yb:YAG laser system and its key techniques are reported. The amplifiers in this system have a multi-pass V-shape structure and the heat in the amplifiers is removed by means of laminar water flow. In the main amplifier, the laser is four-pass, and an approximately 8.5 J/1 Hz/10 ns output is achieved in the primary test. The far-field of the output beam is approximately 10 times the diffraction limit. Because of the higher levels of amplified spontaneous emission (ASE) in the main amplifier, the output energy is lower than expected. At the end we discuss some measures that can improve the properties of the laser system.