Fast neutron absorption spectroscopy is widely used in the study of nuclear structure and element analysis. However, due to the traditional neutron source pulse duration being of the order of nanoseconds, it is difficult to obtain a high-resolution absorption spectrum. Thus, we present a method of ultrahigh energy-resolution absorption spectroscopy via a high repetition rate, picosecond duration pulsed neutron source driven by a terawatt laser. The technology of single neutron count is used, which results in easily distinguishing the width of approximately 20 keV at 2 MeV and an asymmetric shape of the neutron absorption peak. The absorption spectroscopy based on a laser neutron source has one order of magnitude higher energy-resolution power than the state-of-the-art traditional neutron sources, which could be of benefit for precisely measuring nuclear structure data.

According to the public data collected from the Health Commission of Gansu Province, China, regarding the COVID-19 pandemic during the summer epidemic cycle in 2022, the epidemiological analysis showed that the pandemic spread stability and the symptom rate (the number of confirmed cases divided by the sum of the number of asymptomatic cases and the number of confirmed cases) of COVID-19 were different among 3 main epidemic regions, Lanzhou, Linxia, and Gannan; both the symptom rate and the daily instantaneous symptom rate (daily number of confirmed cases divided by the sum of daily number of asymptomatic cases and daily number of confirmed cases) in Lanzhou were substantially higher than those in Linxia and Gannan. The difference in the food sources due to the high difference of the population ethnic composition in the 3 regions was probably the main driver for the difference of the symptom rates among the 3 regions. This work provides potential values for prevention and control of COVID-19 in different regions.

The findings regarding the associations between red meat, fish and poultry consumption, and the metabolic syndrome (Mets) have been inconclusive, and evidence from Chinese populations is scarce. A cross-sectional study was performed to investigate the associations between red meat, fish and poultry consumption, and the prevalence of the Mets and its components among the residents of Suzhou Industrial Park, Suzhou, China. A total of 4424 participants were eligible for the analysis. A logistic regression model was used to estimate the OR and 95 % CI for the prevalence of the Mets and its components according to red meat, fish and poultry consumption. In addition, the data of our cross-sectional study were meta-analysed under a random effects model along with those of published observational studies to generate the summary relative risks (RR) of the associations between the highest v. lowest categories of red meat, fish and poultry consumption and the Mets and its components. In the cross-sectional study, the multivariable-adjusted OR for the highest v. lowest quartiles of consumption was 1·23 (95 % CI 1·02, 1·48) for red meat, 0·83 (95 % CI 0·72, 0·97) for fish and 0·93 (95 % CI 0·74, 1·18) for poultry. In the meta-analysis, the pooled RR for the highest v. lowest categories of consumption was 1·20 (95 % CI 1·06, 1·35) for red meat, 0·88 (95 % CI 0·81, 0·96) for fish and 0·97 (95 % CI 0·85, 1·10) for poultry. The findings of both cross-sectional studies and meta-analyses indicated that the association between fish consumption and the Mets may be partly driven by the inverse association of fish consumption with elevated TAG and reduced HDL-cholesterol and, to a lesser extent, fasting plasma glucose. No clear pattern of associations was observed between red meat or poultry consumption and the components of the Mets. The current findings add weight to the evidence that the Mets may be positively associated with red meat consumption, inversely associated with fish consumption and neutrally associated with poultry consumption.

In recent years, the controlling nutritional status (CONUT) score has increasingly became an effective indicator associated with tumor prognosis. This study was conducted to synthesise data on the prognostic value of CONUT score on patients with upper tract urothelial carcinoma (UTUC) or renal cell carcinoma (RCC) undergoing nephrectomy. We designed and performed a systematic analysis of studies that verified the correlation between preoperative CONUT score and prognosis for UTUC and RCC using PubMed, Web of Science and Embase. The conclusion was clarified by pooled hazard ratios (HR) and 95% confidence intervals (95% CI). Subgroup analysis were further conducted in accordance with different primary tumor. Six studies involving 3529 patients were included in this evidence synthesis, which revealed that the CONUT score had a potential role to predict the survival of UTUC and RCC patients accepting surgery. Pooled analysis showed that the overall survival (OS, HR 2·32, p < 0·0001), cancer-specific survival (CSS, HR 2·68, p < 0·0001) and disease-free survival (DFS, HR 1·62, p < 0·00001) were inferior in the high CONUT score group when compared with low score group. Subgroup analysis revealed that this result was in line with UTUC (OS: HR 1·86, p = 0·02; CSS: HR 2·24, p = 0·01; DFS: HR 1·54, p < 0·00001) and RCC (OS: HR 3·05, p < 0·00001; CSS: HR 3·47, p < 0·00001; DFS: HR 2·21, p = 0·0005) patients respectively. Consequently, the CONUT score is a valuable preoperative index to predict the survival of patients with UTUC or RCC undergoing nephrectomy.

Smooth-walled open channel flow datasets, covering both the direct numerical simulation and experimental measurements with a friction Reynolds number ${\textit {Re}}_\tau$ at a low-to-moderate level of $550\sim 2400$, are adopted to investigate the contributions of different scale motions to the mean wall-shear stress in open channel flows (OCFs). The FIK identity decomposition method by Fukagata et al. (Phys. Fluids, vol. 14, 2002, L73) combined with a scale decomposition is chosen for this research. To see whether/how the contributions in OCFs differ with those in closed channel flows (CCFs), comparisons between the two flows are also made. The scale-decomposed ‘turbulent’ contribution results of present OCFs exhibit two dominant contribution modes (i.e. large-scale motions (LSMs) and very-large-scale motions (VLSMs)) at a streamwise wavelength $\lambda _x=1\sim 2h$ and $O(10h)$, where $h$ is the water depth. The large scales with $\lambda _x>3h$ and $\lambda _x>10h$ are demonstrated to contribute to over 40 % and 20 % of the mean wall-shear stress, respectively. Compared with CCFs, slightly higher and lower contributions in the $\lambda _x>O(10h)$ and $\lambda _x < O(10h)$ wavelength ranges are observed in OCFs, revealing the important free-surface effects in OCFs. Possible mechanisms are discussed to lend support for the observed differences between the two flows.

The geometry of compound sessile drops at equilibrium on a flat substrate can exhibit a variety of complicated morphological configurations. In this paper, we first investigate the configuration boundaries of the compound sessile drops in a wide parameter space, where a specific configuration is not stable outside its boundaries. Then, we focus on the transitions among the axisymmetric configurations, i.e. encapsulation, lens and collars. The configuration transitions result from the variation of the wettability of the substrate and the volume ratio of the two component droplets. With the help of theoretical analysis and numerical simulations, we obtain previously unidentified criteria for the onset of configuration transition, identify the irreversible and reversible configuration transitions, reveal the dynamic behaviours of configuration transitions that are not accessible to theoretical analysis, and provide a further step towards the ultimate purpose of such work, which is the controllable reconfiguration of the compound sessile drops.

We report on environmentally stable long-cavity ultrashort erbium-doped fiber lasers, which self-start mode-locking at quite low thresholds by using spectrally filtered and phase-biased nonlinear amplifying long-loop mirrors. By employing 100-m polarization-maintaining fiber (PMF) in the nonlinear loop, the fundamental repetition rate reaches 1.84 MHz and no practical limitation is found to further decrease the repetition rate. The filter used in the long loop not only suppresses Kelly sidebands of the solitons, but also eliminates the amplified spontaneous emission which exists widely in low-repetition-rate ultrafast fiber lasers. The bandwidth of the filter is optimized by using a numerical model. The laser emits approximately 3-ps pulses with an energy of 17.4 pJ, which is further boosted to $1.5~\unicode[STIX]{x03BC}\text{J}$ by using a fiber amplifier.

A supercapacitor electrode featured with a voltage self-stabilizing capability is demonstrated by growing indium tin oxide (ITO) nanowires on Ni foam. The ITO nanowires with a single crystal structure are prepared by using magnetron sputtering technique, and they can act as an active electrode material. Charging–discharging experiments are performed under different current densities, demonstrating a good rate capability. Using properly designing top and bottom double connection circuits, part of the electrode can be used as a resistance switch. An electrode that can function as a supercapacitor and a resistance switch is fabricated. Detailed characteristics confirm that the device not only exhibits high performance as a supercapacitor but also has good characteristics of resistance switching (RS). The specific capacitance is 956 F/g at the scanning rate of 10 mV/s, and the switching ratio as a bipolar resistance switch is as high as 102. The stabilization time of discharging voltage is nearly doubled longer than that without any RS function, revealing the potential application of our devices, which can be used as a supercapacitor with voltage self-stabilizing.

Multi-pass warm rolling with falling temperature was proposed and investigated to obtain AZ31 Mg alloy sheets with a fine-grained microstructure. The results indicated that the grain microstructure of AZ31 alloy sheets was successfully refined from 22.1 to 4.5 μm after multi-pass warm rolling with falling temperature and annealing. Compared to the as-received sheet, the multi-pass warm rolled sheets in annealed condition exhibited weaker (0001) basal texture intensity, which resulted in the significantly increased Schmid factor of 〈a〉 basal slip. After multi-pass warm rolling with falling temperature, the rolled sheets in annealed condition also exhibited much better mechanical properties, e.g., higher tensile strength, larger fracture elongation, and higher Erichsen value, especially the IE of 8-pass warm rolled sheet in annealed condition was significantly increased by ∼33% under the same thickness, which could be attributed to the refined grain microstructure and the weakened basal texture.

Auto-alignment is a basic technique for high-power laser systems. Special techniques have been developed for laser systems because of their differing structures. This paper describes a new sensor for auto-alignment in a laser system, which can also serve as a reference in certain applications. The authors prove that all of the beam transfer information (position and pointing) can theoretically be monitored and recorded by the sensor. Furthermore, auto-alignment with a single lens sensor is demonstrated on a simple beam line, and the results indicate that effective auto-alignment is achieved.

Shot-peened CM400 maraging steel was used to study the mechanism of enhanced notch fatigue properties of ultra-high strength materials. After shot peening, the specimen surface became rougher, but the transversal machining traces were reduced. The yield strength was slightly improved while the ultimate tensile strength and hardness maintained constant; as a result, the fatigue limit was promoted by about 1.5 times. The nucleated sites of the fatigue fracture were partly changed from the surface to subsurface/interior of the specimen. To further analyze the influencing factors of fatigue properties, the fatigue damage process may be resolved to two aspects: (a) fatigue damage rate affected by shear deformation and (b) fatigue damage tolerance controlled by the dilatation fracture process. Considering the stress state near the notch tip, the hydrostatic stress and maximum shear stress are considered for better understanding these two aspects. It is observed that the fatigue damage tolerance increased while the fatigue damage rate decreased after shot peening. Therefore, the notch fatigue properties of CM400 maraging steels can effectively be improved.

This investigation addresses the dynamics of annular viscoelastic films flowing down a flexible tube. The fluid viscoelasticity is assumed to be weak in order to obtain approximate explicit expressions for the stresses. Based on Shkadov’s integral boundary layer method (Fluid Dyn., vol. 2(1), 1967, pp. 29–34), a set of nonlinear evolution equations is derived that is valid for flows with moderate Reynolds numbers. The linear stability property of the system is examined by using normal-mode analysis, which is verified by comparing the results with those resulting from the linearization of the full Navier–Stokes equations. The results indicate that the fluid viscoelasticity plays an unstable role in the stability of the annular film flow. The tube flexibility, which includes wall damping and wall tension, plays a dual role. A bifurcation analysis is performed, and the families of steady travelling waves are catalogued. It is found that the stiffness of the tube tends to stimulate the interfacial capillary ripples. The fluid viscoelasticity acts to strengthen the dispersion of the interfacial waves but weakens the interfacial capillary ripples. The spatio-temporal evolutions of the system are also solved numerically. When the tube radius is small enough, tube closure can be observed due to the Plateau–Rayleigh instability. The fluid viscoelasticity acts to promote tube closure while the tube radius is relatively small. However, it plays a role in postponing the closure of the tube with a large radius.