Silicified microfossils are reported from nine stratigraphic sections of the Ediacaran Doushantuo Formation deposited in shelf margin, slope, and basin environments in Hunan Province of South China. These microfossils include sphaeromorphic and acanthomorphic acritarchs (15 genera and 29 species, including three new acanthomorph species, Bullatosphaera? colliformis n. sp., Eotylotopalla inflata n. sp., and Verrucosphaera? undulata n. sp.), multicellular algae, tubular microfossils, and other problematic forms, representing major fossil groups similar to those from the Doushantuo Formation in more proximal facies (e.g., inner shelf and shelf lagoon). A database of the abundance and occurrences of Doushantuo acanthomorphs is assembled and analyzed using quantitative and data-visualization methods (e.g., rarefaction analysis, non-parametric multidimensional scaling, and network analysis). The results show that, at the genus and species levels, taxonomic richness of Doushantuo acanthomorphs exhibits considerable variation among facies, but this variation is largely due to sampling and taphonomic biases. The results also show that numerous acanthomorph taxa have broad facies distribution, affirming their biostratigraphic value. The analysis confirms that acanthomorphs in the Weng'an biota of shelf margin facies are composed of a mixture of Member II and Member III assemblages of shelf-lagoon facies in the Yangtze Gorges area. The study shows the biostratigraphic potential of acanthomorphs in the establishment of regional biozones using the first appearance datum of widely distributed taxa, highlighting the importance of continuing exploration of under-sampled Doushantuo sections in slope and basinal facies.

UUID: http://zoobank.org/6fc92858-4054-4117-8043-1f06cfe77155

The unsteady mechanism of unstart flow for an inlet with rectangular-to-elliptical shape transition (REST) under the off-design condition at a Mach of 4 is investigated using the delay detached eddy simulation method. With the help of numerical simulations, the unsteady dynamics, especially the low-frequency characteristics of the REST inlet unstart flow, as well as the self-sustaining mechanism, is investigated. The instantaneous flow illustrates the unsteady phenomena of the REST unstart flow, including the interaction between the cowl-closure leading edge (CLE) shock and the shear layer, breathing of the separation bubble, flapping of the separation shock, instability of the shear layer and vortex shedding along the shear layer. The spectral analysis reveals that the lower frequency dynamics is associated with the breathing of the separation bubble and the flapping motion of the separation shock wave, while the higher frequency is related to the instability of the shear layer affected by cowl-closure leading edge shock and the formation of shedding vortices. Further, coherence analysis shows that the contribution of these flow structures dominating the low-frequency dynamics couple with each other. Based on the dynamic mode decomposition results, the characteristics that contribute to the unsteady behaviour of unstart flow are summarized. The streamwise vortices downstream of the separation and the shedding vortices are believed to be the main driving force of the global low-frequency unsteadiness of the REST inlet unstart flow under the off-design condition. Moreover, the CLE shock plays an important role in the process during the dominant flow structure conversion from the backflow within the separation bubble into elongated streamwise structures.

As a member of the Scathophagidae family, Scathophaga stercoraria (S. stercoraria) is widely distributed globally and is closely associated with animal feces. It is also a species of great interest to many scientific studies. However, its phylogenetic relationships are poorly understood. In this study, S. stercoraria was found in plateau pikas for the first time. The potential cause of its presence in the plateau pikas was discussed and it was speculated that the presence of S. stercoraria was related to the yak feces. In addition, 2 nuclear genes (18SrDNA and 28SrDNA), 1 mitochondrial gene (COI), and the complete mitochondrial genome of S. stercoraria were sequenced. Phylogenetic trees constructed based on 13 Protein coding genes (13PCGs), 18S and 28S rDNA showed that S. stercoraria is closely related to the Calliphoridae family; phylogenetic results based on COI suggest that within the family Scathophagidae, S. stercoraria is more closely related to the genus Leptopa, Micropselapha, Parallelomma and Americina. Divergence times estimated using the COI gene suggest that the divergence formation of the genus Scathophaga is closely related to changes in biogeographic scenarios and potentially driven by a combination of uplift of the Qinghai-Tibetan Plateau (QTP) and dramatic climate changes. These results provide valuable information for further studies on the phylogeny and differentiation of the Scathophaga genus in the future.

This paper retrospectively analysed the prevalence of macrolide-resistant Mycoplasma pneumoniae (MRMP) in some parts of China. Between January 2013 and December 2019, we collected 4,145 respiratory samples, including pharyngeal swabs and alveolar lavage fluid. The highest PCR-positive rate of M. pneumoniae was 74.5% in Beijing, the highest resistance rate was 100% in Shanghai, and Gansu was the lowest with 20%. The highest PCR-positive rate of M. pneumoniae was 74.5% in 2013, and the highest MRMP was 97.4% in 2019; the PCR-positive rate of M. pneumoniae for adults in Beijing was 17.9% and the MRMP was 10.48%. Among the children diagnosed with community-acquired pneumonia (CAP), the PCR-positive and macrolide-resistant rates of M. pneumoniae were both higher in the severe ones. A2063G in domain V of 23S rRNA was the major macrolide-resistant mutation, accounting for more than 90%. The MIC values of all MRMP to erythromycin and azithromycin were ≥ 64 μg/ml, and the MICs of tetracycline and levofloxacin were ≤ 0.5 μg/ml and ≤ 1 μg/ml, respectively. The macrolide resistance varied in different regions and years. Among inpatients, the macrolide-resistant rate was higher in severe pneumonia. A2063G was the common mutation, and we found no resistance to tetracycline and levofloxacin.

Soft drink consumption has become a highly controversial public health issue. Given the pattern of consumption in China, sugar-sweetened beverage is the main type of soft drink consumed. Due to containing high levels of fructose, a soft drink may have a deleterious effect on handgrip strength (HGS) due to oxidative stress, inflammation and insulin resistance. However, few studies show an association between soft drink consumption and HGS in adults. We aimed to investigate the association between soft drink consumption and longitudinal changes in HGS among a Chinese adult population. A longitudinal population-based cohort study (5-year follow-up, median: 3·66 years) was conducted in Tianjin, China. A total of 11 125 participants (56·7 % men) were enrolled. HGS was measured using a handheld digital dynamometer. Soft drink consumption (mainly sugar-containing carbonated beverages) was measured at baseline using a validated FFQ. ANCOVA was used to evaluate the association between soft drink consumption and annual change in HGS or weight-adjusted HGS. After adjusting for multiple confounding factors, the least square means (95 % CI) of annual change in HGS across soft drink consumption frequencies were −0·70 (–2·49, 1·09) for rarely drinks, −0·82 (–2·62, 0·97) for < 1 cup/week and −0·86 (–2·66, 0·93) for ≥ 1 cup/week (Pfor trend < 0·05). Likewise, a similar association was observed between soft drink consumption and annual change in weight-adjusted HGS. The results indicate that higher soft drink consumption was associated with faster HGS decline in Chinese adults.

Natural clays are often employed as substrates for heterogeneous catalysts. However, the direct use of raw clays as catalysts has received less research attention. The objective of the present study was to help fill this gap by investigating catalytic properties of raw pelagic clays (PC) collected from the Indian Ocean. The raw PC were discovered to be efficient catalysts in the reduction of 4-nitrophenol (4-NP) in the presence of NaBH4. The effects of parameters including pH values, dosages of PC, and initial concentration of 4-NP and NaBH4 on the conversion or degradation rate of 4-NP have been investigated. The 4-NP was observed to be completely degraded within 480 s under conditions of 0.10 mM 4-NP, 25.0 mM NaBH4, and 0.20 g/L PC at an initial pH value of 7.0. The apparent rate constant was evaluated to be 27.53 × 10–3 s–1. Unlike previous pseudo-first order kinetics experiments, the induction period and degradation stages were observed to occur simultaneously during the PC catalysis. The S-shaped kinetics for 4-NP conversion was found to be perfectly matched by Fermi's function, and the enzyme-like catalysis by PC was appointed to describe the kinetics. Species of Fe(III), Mn(IV), and Mn(III) in PC were found to be essential, and were partly reduced to Fe(0) and Mn(II) by NaBH4 in our reaction, contributing to rapid conversion of 4-NP to 4-aminophenol (4-AP). The raw PC was converted to magnetic PC (m-PC) particles, which made PC particles separate easily for cycling use. This discovery would also have applications in continuous flow-fluid catalysis.

Graphite phase carbon nitride (g-C3N4) is a non-metal semiconductor material with a suitable band gap (2.7 eV) for visible photocatalysis. However, the high cost of relevant synthesis methods and poor adsorption performance have limited its practical applications. The objective of the present study was to mitigate these problems by synthesizing the g-C3N4 in the presence of exfoliated montmorillonite (Mnt). Compared with bulk montmorillonite, the specific surface area of exfoliated two-dimensional Mnt layers was significantly increased. As a result, the light transmittance of the lamella improved noticeably due to the fact that a freshly exposed surface had a large number of active reaction sites, making Mnt an excellent carrier for the photocatalyst g-C3N4. In order to improve the photocatalytic performance of g-C3N4, a series of g-C3N4/Mnt composites was prepared by a wet chemical method using Mnt nanolayers as the matrix. X-ray diffraction, infrared spectroscopy, Brunauer-Emmett-Teller nitrogen adsorption/desorption, transmission electron microscopy, and ultraviolet-visible diffuse reflectance spectroscopy were used to analyze the phase structure, the chemical bonds, the specific surface area and pore sizes, the morphology, and the light absorption characteristics of the composites, respectively. Rhodamine B (RhB) served as the target dye to test the photocatalytic degradation performance of the composites under visible light. According to the findings, the surface of the Mnt nanolayers was densely and uniformly covered by g-C3N4, forming a multi-layered stack structure. An increase of the calcination temperature improved the crystallinity of g-C3N4, leading first to densification and then to relaxation of the layered composite structure. Conversely, the band gap of the composite gradually decreased from 2.56 to 2.4 eV. Furthermore, temperature exposure changed the photocatalytic performance of the composite drastically. While the largest photocatalytic activity was observed at 610°C, it started to decrease with further heating of the composite. The complete degradation of RhB solution occurred after 2 h of visible light irradiation. The findings of the current study provide a scientific basis for the synthesis of a new generation of photocatalysts.

The passive film of reinforcing steel in marine concrete is damaged by the infiltration of chloride and sulfate ions. Layered double hydroxide (LDH) can adsorb anions and release interlayer ions to form passive films due to its ion exchange property. A Mg-Al-NO3 layered double hydroxide/montmorillonite (LDH/Mnt) composite inhibitor was prepared by layer-by-layer self-assembly (LBL) of LDH and Mnt. The structure and morphology of the LDH/Mnt composites were characterized by X-ray diffraction (XRD), laser Raman spectroscopy, N2-adsorption/desorption measurements, and transmission electron microscopy (TEM). The LDH/Mnt composites, as inhibitors of chloride ions and sulfate ions, exhibited high slow-release efficiency. The mass ratio of LDH and Mnt affected the curing capacity of the synthesized composites, and the optimum mass ratio was LDH/Mnt = 1:1 for which slow-release efficiency reached 94.16%.

A highly compressive effect would suppress the mixing of the shear layer in a convex wall jet. The spanwise distributed protrusions at the nozzle lip are employed to achieve mixing enhancement in this study. The mixing characteristics and enhancement mechanisms are numerically investigated by the delayed detached-eddy simulation method based on the two-equation shear-stress transport model. A widely applicable flow spatiotemporal analysis method, called proper orthogonal decomposition (POD), is used to gain further insight into the dynamical behaviours of the flow instability mode. The results reveal that the centrifugal effect maintains and amplifies the initial perturbations induced by the spanwise distributed heterogeneities, resulting in forced streamwise vortices. The instabilities induced by the streamwise vortices significantly increase the growth rate of the jet half-width and the shear layer vorticity thickness. The spanwise wavelength of the streamwise vortices is consistent with the spanwise distributed forced excitation. In addition, the spanwise meandering motion of the streamwise vortices is observed, which is usually associated with the streamwise travelling wave. This is further confirmed by the POD analysis of the spanwise velocity fluctuation in both stream-radial and stream-span sections. Also, the spatial distributions of the POD modes with the highest energy provide information on the secondary instability modes. Both sinuous and varicose types of disturbances are observed in the unforced jet, whereas the forced jet seems to be dominated by the sinuous type instability, which is more easily excited than the varicose type instability. Moreover, the turbulence intensity in the forced jet is also significantly enhanced as expected due to the earlier and stronger streamwise vortices and associated instabilities. The enhanced turbulent characteristics of the highly compressible condition tend to be isotropic, whereas in the unforced jet, it is anisotropic due to the strong compressibility suppressing the spanwise turbulent fluctuations.

Animal studies have shown that capsaicin plays a positive role in weight management. However, the results in human research are controversial. Therefore, the present systematic review and meta-analysis aimed to evaluate the effect of capsaicin on weight loss in adults. We searched PubMed, Embase, China Biomedical Literature Database (CBM), Cochrane library and clinical registration centre, identifying all randomised controlled trials (RCT) published in English and Chinese to 3 May 2022. A random-effect model was used to calculate the weighted mean difference (WMD) and 95 % CI. Heterogeneity between studies was assessed by the Cochran Q statistic and I-squared tests (I2). Statistical analyses were performed using STATA version 15.1. P-values < 0·05 were considered as statistically significant. From 2377 retrieved studies, fifteen studies were finally included in the meta-analyses. Fifteen RCT with 762 individuals were included in our meta-analysis. Compared with the control group, the supplementation of capsaicin resulted in significant reduction on BMI (WMD: −0·25 kg/m2, 95 % CI = –0·35, –0·15 kg/m2, P < 0·05), body weight (BW) (WMD: −0·51 kg, 95 % CI = –0·86, –0·15 kg, P < 0·05) and waist circumference (WC) (WMD: −1·12 cm, 95 % CI = –2·00, –0·24 cm, P < 0·05). We found no detrimental effect of capsaicin on waist-to-hip ratio (WMD: −0·05, 95 % CI = –0·17, 0·06, P > 0·05). The current meta-analysis suggests that capsaicin supplementation may have rather modest effects in reducing BMI, BW and WC for overweight or obese individuals.

Paravulvus zhongshanensis sp. nov., isolated from soil in a location at Jiangsu Province, China, is described and illustrated based on morphological, morphometric and molecular characterizations. The new species is characterized by its body 1.17–1.53 mm long, lip region offset by marked constriction and 12.1–13.8 μm broad, mural tooth deltoid and 9.6–11.7 μm long, neck 278–360 μm long, pharyngeal expansion 164–208 μm long or occupying more than one-half (54–62%) of total neck length, uterus 32.5–35.3 μm long or 1.0–1.1 times the corresponding body diameter, V = 47.8–53.4, paravulvae absent, female tail subcylindrical conoid (30.5–39.5 μm, c = 36.0–45.5, c′ = 1.7–2.2) with widely rounded end, and male unknown. The new species was compared with six known species of the genus including Paravulvus acuticaudatus, Paravulvus confusus, Paravulvus hartingii, Paravulvus iranicus, Paravulvus loofi and Paravulvus microdontus mainly by similarities in having conical tail and c′ value larger than 1.3. The rRNA and mitochondrial cytochrome oxidase subunit 1 genes of the new species were obtained and were used for reconstructing the phylogenetic relationships of the new species.

Intertemporal choices involve tradeoffs between outcomes that occur at different times. Most of the research has used pure gains tasks and the discount rates yielding from those tasks to explain and predict real-world behaviors and consequences. However, real decisions are often more complex and involve mixed outcomes (e.g., sooner-gain and later-loss or sooner-loss and later-gain). No study has used mixed gain-loss intertemporal tradeoff tasks to explain and predict real-world behaviors and consequences, and studies involving such tasks are also scarce. Considering that tasks involving a combination of gains and losses may yield different discount rates and that existing pure gains tasks do not explain or predict real-world outcomes well, this study conducted two experiments to compare the discount rates of mixed gain-loss intertemporal tradeoffs with those of pure gains or pure losses (Experiment 1) and to examine whether these tasks predicted different real-world behaviors and consequences (Experiment 2). Experiment 1 suggests that the discount rate ordering of the four tasks was, from highest to lowest, pure gains, sooner-loss and later-gain, pure losses, and sooner-gain and later-loss. Experiment 2 indicates that the evidence supporting the claim that the discount rates of the four tasks were related to different real-world behaviors and consequences was insufficient.

The supersonic jet over a convex wall is numerically investigated using the delayed detached-eddy simulation method based on the two-equation shear-stress transport model. The current study focuses on instabilities, turbulent statistics and the influence of compressibility effects. A widely applicable data-driven modal decomposition approach, called dynamic mode decomposition is used to gain further insight into the dynamical behaviours of the flow. The results demonstrate that streamwise vortices caused by the centrifugal force play significant roles in shear layer instabilities. The spanwise modulation of the streamwise vortices induces inflection points in the flow, resulting in secondary shear layer instability. This instability, which is sustained by the side-to-side sway of the streamwise vortices to obtain energy from the mean flow, dominates the rapid growth of the shear layer and turbulent stresses in the growth region. In the self-similar region, there is not only self-similarity of velocity profiles, but also self-similarity of normalized turbulent stresses. The compressibility effect significantly inhibits the growth of the shear layer and the formation of large-scale streamwise vortices. The investigation of turbulent stresses in the self-similar region with increasing convective Mach number indicates that the compressibility effect enhances turbulence anisotropy.

It has been suggested that added sugar intake is associated with non-alcoholic fatty liver disease (NAFLD). However, previous studies only focused on sugar-sweetened beverages; the evidence for associations with total added sugars and their sources is scarce. This study aimed to examine the associations of total added sugars, their physical forms (liquid v. solid) and food sources with risk of NAFLD among adults in Tianjin, China. We used data from 15 538 participants, free of NAFLD, other liver diseases, CVD, cancer or diabetes at baseline (2013–2018 years). Added sugar intake was estimated from a validated 100-item FFQ. NAFLD was diagnosed by ultrasonography after exclusion of other causes of liver diseases. Multivariable Cox proportional hazards models were fitted to calculate hazard ratios (HR) and corresponding 95 % CI for NAFLD risk with added sugar intake. During a median follow-up of 4·2 years, 3476 incident NAFLD cases were documented. After adjusting for age, sex, BMI and its change from baseline to follow-up, lifestyle factors, personal and family medical history and overall diet quality, the multivariable HR of NAFLD risk were 1·18 (95 % CI 1·06, 1·32) for total added sugars, 1·20 (95 % CI 1·08, 1·33) for liquid added sugars and 0·96 (95 % CI 0·86, 1·07) for solid added sugars when comparing the highest quartiles of intake with the lowest quartiles of intake. In this prospective cohort of Chinese adults, higher intakes of total added sugars and liquid added sugars, but not solid added sugars, were associated with a higher risk of NAFLD.

The southern Great Xing’an Range (SGXR), located in the eastern segment of the Central Asian Orogenic Belt (CAOB), is one of the most economically important Cu–Mo–Fe–Sn–Pb–Zn–Ag metallogenic provinces in China. The newly discovered Panjiaduan Cu–Pb–Zn deposit (9.3 Mt; at 1.36% Cu, 2.90% Pb, 3.80% Zn and 38.12 g/t Ag), located in the SE segment of the SGXR, is primarily hosted in fracture zones in volcanic rocks and granodiorite of the Manitu Formation. Four paragenetic stages of metallic mineralization are identified: (I) quartz-pyrite-arsenopyrite; (II) quartz-polymetallic sulphide; (III) quartz-galena-sphalerite-argentite; and (IV) quartz-calcite-minor sulphide. The hydrothermal quartz contains three types of primary fluid inclusion (FIs): vapour-rich two-phase liquid-vapour (LV-type), liquid-rich two-phase liquid-vapour (VL-type) and three-phase liquid-vapour-solid FIs (SL-type). Stages I and II contain all types with homogenization temperatures (Th) of 324–386 °C and 276–334 °C as well as salinities of 0.7–38.0 wt% and 0.9–34.7 wt%, respectively, whereas stage III is composed of VL- and LV-type FIs with Th of 210–269 °C and salinities of 0.5–7.2 wt%. Only VL-type FIs occur in stage IV, with Th of 139–185 °C and salinities of 1.6–4.2 wt%. The δ18OH2O and δD values vary from −15.7 to 2.6‰ and −132.7 to −110.2‰, respectively, indicating predominant meteoric water with an initial magmatic source. The He–Ar isotopic compositions of the pyrite inclusions from the Panjiaduan Cu–Pb–Zn veins suggest that fluids were derived from the crust.

The study was to evaluate the reproducibility and validity of the FFQ for residents of northeast China. A total of 131 participants completed two FFQ (FFQ1 and FFQ2) within a 3-month period, 125 participants completed 8-d weighed diet records (WDR) and 112 participants completed blood biomarker testing. Reproducibility was measured by comparing nutrient and food intake between FFQ1 and FFQ2. The validity of the FFQ was assessed by WDR and the triad method. The Spearman correlation coefficients (SCC) and intraclass correlation coefficients (ICC) for reproducibility ranged from 0·41 to 0·69 (median = 0·53) and from 0·18 to 0·68 (median = 0·53) for energy and nutrients and from 0·37 to 0·73 (median = 0·59) and from 0·33 to 0·86 (median = 0·60) for food groups, respectively. The classifications of same or adjacent quartiles ranged from 73·64 to 93·80 % for both FFQ. The crude SCC between the FFQ and WDR ranged from 0·27 to 0·55 (median = 0·46) for the energy and nutrients and from 0·26 to 0·70 (median = 0·52) for food groups, and classifications of the same or adjacent quartiles ranged from 65·32 to 86·29 %. The triad method indicated that validation coefficients for the FFQ were above 0·3 for most nutrients, which indicated a moderate or high level of validity. The FFQ that was developed for residents of northeast China for the Northeast Cohort Study of China is reliable and valid for assessing the intake of most foods and nutrients.

Prospective cohort studies linking organ meat consumption and non-alcoholic fatty liver disease (NAFLD) are limited, especially in Asian populations. This study aimed to prospectively investigate the association between organ meat consumption and risk of NAFLD in a general Chinese adult population. This prospective cohort study included a total of 15 568 adults who were free of liver disease, CVD and cancer at baseline. Dietary information was collected at baseline using a validated FFQ. NAFLD was diagnosed by abdominal ultrasound after excluding other causes related to chronic liver disease. Cox proportional regression models were used to assess the association between organ meat consumption and risk of NAFLD. During a median of 4·2 years of follow-up, we identified 3604 incident NAFLD cases. After adjusting for demographic characteristics, lifestyle factors, vegetable, fruit, soft drink, seafood and red meat consumption, the multivariable hazard ratios (95 % CI) for incident NAFLD across consumption of organ meat were 1·00 (reference) for almost never, 1·04 (0·94, 1·15) for tertile 1, 1·08 (0·99, 1·19) for tertile 2 and 1·11 (1·01, 1·22) for tertile 3, respectively (P for trend < 0·05). Such association did not differ substantially in the sensitivity analysis. Our study indicates that organ meat consumption was related to a modestly higher risk of NAFLD among Chinese adults. Further investigations are needed to confirm this finding.