MicroRNAs (miRNAs) are endogenous, non-coding RNAs, which are functional in a variety of biological processes through post-transcriptional regulation of gene expression. However, the role of miRNAs in the interaction between Bacillus thuringiensis and insects remains unclear. In this study, small RNA libraries were constructed for B. thuringiensis-infected (Bt) and uninfected (CK) Spodoptera exigua larvae (treated with double-distilled water) using Illumina sequencing. Utilising the miRDeep2 and Randfold, a total of 233 known and 726 novel miRNAs were identified, among which 16 up-regulated and 34 down-regulated differentially expressed (DE) miRNAs were identified compared to the CK. Kyoto Encyclopedia of Genes and Genomes (KEGG) pathway analysis revealed that potential target genes of DE miRNAs were associated with ABC transporters, fatty acid metabolism and MAPK signalling pathway which are related to the development, reproduction and immunity. Moreover, two miRNA core genes, SeDicer1 and SeAgo1 were identified. The phylogenetic tree showed that lepidopteran Dicer1 clustered into one branch, with SeDicer1 in the position closest to Spodoptera litura Dicer1. A similar phylogenetic relationship was observed in the Ago1 protein. Expression of SeDicer1 increased at 72 h post infection (hpi) with B. thuringiensis; however, expression of SeDicer1 and SeAgo1 decreased at 96 hpi. The RNAi results showed that the knockdown of SeDicer1 directly caused the down-regulation of miRNAs and promoted the mortality of S. exigua infected by B. thuringiensis GS57. In conclusion, our study is crucial to understand the relationship between miRNAs and various biological processes caused by B. thuringiensis infection, and develop an integrated pest management strategy for S. exigua via miRNAs.

The role of Mn oxide in the abiotic formation of humic substances has been well demonstrated. However, information on the effect of crystal structure and surface-chemical characteristics of Mn oxide on this process is limited. In the present study, hexagonal and triclinic birnessites, synthesized in acidic and alkali media, were used to study the influence of the crystal-structure properties of birnessites on the oxidative polymerization of hydroquinone and to elucidate the catalytic mechanism of birnessites in the abiotic formation of humic-like polymers in hydroquinone-birnessite systems. The intermediate and final products formed in solution and solid-residue phases were identified by UV/Visible spectroscopy, atomic absorption spectrometry, Fourier-transform infrared spectroscopy, X-ray diffraction, solid-phase microextraction-gaschromatography-mas ss pectrometry, ion chromatography, and ultrafiltration. The degree of oxidative polymerization of hydroquinone wasenhanced with increase in the interlayer hydrated H+, the average oxidation state (AOS), and the specific surface area of birnessites. The nature of the functional groups of the humic-like polymers formed was, however, almost identical when hydroquinone was catalyzed by hexagonal and triclinic birnessites with similar AOS of Mn. The results indicated that crystal structure and surface-chemistry characteristics have significant influence on the oxidative activity of birnessites and the degree of polymerization of hydroquinone, but have little effect on the abiotic formation mechanism of humic-like polymers. The proposed oxidative polymerization pathway for hydroquinone isthat, asit approachesthe birnessite, it formsp recursor surface complexes. Asa strong oxidant, birnessite accepts an electron from hydroquinone, which is oxidized to 1,4-benzoquinone. The coupling, cleavage, polymerization, and decarboxylation reactionsaccompany the generation of 1,4-benzoquinone, lead to the release of CO2 and carboxylic acid fragments, the generation of rhodochrosite, and the ultimate formation of humic-like polymers. These findings are of fundamental significance in understanding the catalytic role of birnessite and the mechanism for the abiotic formation of humic substances in nature.

Almost all hospitals are equipped with air-conditioning systems to provide a comfortable environment for patients and staff. However, the accumulation of dust and moisture within these systems increases the risk of transmission of microbes and have on occasion been associated with outbreaks of infection. Nevertheless, the impact of air-conditioning on the transmission of microorganisms leading to infection remains largely uncertain. We conducted a scoping review to screen systematically the evidence for such an association in the face of the coronavirus disease 2019 epidemic. PubMed, Embase and Web of Science databases were explored for relevant studies addressing microbial contamination of the air, their transmission and association with infectious diseases. The review process yielded 21 publications, 17 of which were cross-sectional studies, three were cohort studies and one case−control study. Our analysis showed that, compared with naturally ventilated areas, microbial loads were significantly lower in air-conditioned areas, but the incidence of infections increased if not properly managed. The use of high-efficiency particulate air (HEPA) filtration not only decreased transmission of airborne bioaerosols and various microorganisms, but also reduced the risk of infections. By contrast, contaminated air-conditioning systems in hospital rooms were associated with a higher risk of patient infection. Cleaning and maintenance of such systems to recommended standards should be performed regularly and where appropriate, the installation of HEPA filters can effectively mitigate microbial contamination in the public areas of hospitals.

Varicella is a highly infectious contagious disease, and Chongqing is one of the high incidence areas in China. To understand the epidemic regularity and predict the epidemic trend of varicella is of great significance to the risk analysis and health resource allocation in the health sector. First, we used the ‘STL’ function to decompose the incidence of varicella to understand its trend and seasonality. Second, we established SARIMA model for linear fitting, and then took the residual of the SARIMA model as the sample to fit the LS-SVM model, to explain the non-linearity of the residuals. The monthly varicella incidence peaks in April to June and October to December. Mixed model was compared to SARIMA model, the prediction error of the hybrid model was smaller, and the RMSE and MAPE values of the hybrid model were 0.7525 and 0.0647, respectively, the mixed model had a better prediction effect. Based on the study, the incidence of varicella in Chongqing has an obvious seasonal trend, and a hybrid model can also predict the incidence of varicella well. Thus, hybrid model analysis is a feasible and simple method to predict varicella in Chongqing.

This paper studies the data-based polyhedron model and its application in uncertain linear optimization of engineering structures, especially in the absence of information either on probabilistic properties or about membership functions in the fussy sets-based approach, in which situation it is more appropriate to quantify the uncertainties by convex polyhedra. Firstly, we introduce the uncertainty quantification method of the convex polyhedron approach and the model modification method by Chebyshev inequality. Secondly, the characteristics of the optimal solution of convex polyhedron linear programming are investigated. Then the vertex solution of convex polyhedron linear programming is presented and proven. Next, the application of convex polyhedron linear programming in the static load-bearing capacity problem is introduced. Finally, the effectiveness of the vertex solution is verified by an example of the plane truss bearing problem, and the efficiency is verified by a load-bearing problem of stiffened composite plates.

Measurement of runaway electron beam (REB) is essential to investigate behavior of runaway electrons produced in nanosecond-pulse gas discharge. A Faraday cup is designed to measure the REB current in nanosecond-pulse discharge when the applied dV/dt is 75 kV/ns. The Faraday cup considers the impendence match with the oscilloscope and the design of the receiving part. The experimental results show that the measured REB current has a rise time of 348 ps and a full width at half maximum of 510 ps. The comparison of the measurement results by the Faraday cup and a REB collector confirm that the Faraday cup is able to measure REB current in nanosecond-pulse discharge. Furthermore, consecutive waveforms of the REB currents show stable results by using the designed Faraday cup. In addition, effects of the interelectrode gap, gas pressure, and cathode material on the REB current are investigated by the designed Faraday cup, and the measurement results provide characteristics of REB current under different conditions. The REB current decreases when the gap spacing or gas pressure increases. REB current increases with the cathode diameter. It indicates that the high-energy electrons are generated not only at the edge of the cathode but also on the side surface of the cathode.

We studied the effects of four non-nutrient environmental factors (temperature, salinity, irradiance and pH) on the growth inhibition of the macroalgae Ulva pertusa (Chlorophyta) upon the microalgae Heterosigma akashiwo (Rhaphidophyta). Experiments were conducted in single-factor incubation and various two-factor combination experiments in which temperature (10, 15, 25 and 30°C), salinity (10, 20, 30 and 40 g kg−1 water), irradiance (20, 100, 200 and 400 μmol m−2 s−1), and pH (5.5, 7, 8.5 and 10) were varied systematically. The growth rates of U. pertusa and H. akashiwo and the rate of microalgal growth inhibition were altered significantly by changing some of the non-nutrient factors in both the single-factor and the two-factor experiments. The optimal growth conditions for U. pertusa were 20–25°C, salinity of 30 g kg−1, irradiance level of 200–400 μmol m−2 s−1, and pH 8.5–10; optimal conditions for H. akashiwo growth were 25°C, 30 g kg−1, 100 μmol m−2 s−1 and pH 8.5, respectively. The growth inhibitory influence of U. pertusa on H. akashiwo was strongest at 25°C with low salinity (10 g kg−1), high irradiance (400 μmol m−2 s−1) and high alkalinity (pH = 10). The results of this study may be helpful in the development of methods for using green macroalgae to control the proliferation of microalgae in harmful algal blooms (HABs). In particular, these findings provide guidance regarding optimum levels of non-nutrient environmental factors in confined areas, such as aquaculture factories.

Changes in soil chemistry in response to varying climatic regimes can alter the equilibria of soil systems and result in different clay minerals. Variations in phyllosilicate clay composition can reflect temporal and spatial climatic changes, such as summer/winter monsoon cycles. The objective of this research was to investigate the mineralogy of the clay fractions as a proxy for determining variations in the East Asian monsoon climate, based on a section at Chaoyang in China spanning the last 0.423 Ma BP. The clay mineralogy record in the Chaoyang section was compared with other proxies as recorded in this section and with other palaeoclimatic indicators, including oxygen isotopes from oceanic sediments and loess–palaeosol sections on the Chinese Loess Plateau (CLP). The results from clay mineralogy and related climatic studies show that the summer monsoon has a trend of four increased stages and four decreased stages; whereas the winter monsoon displays the opposite trend. During the last 0.423 Ma BP, the strongest winter monsoon occurred around 0.243–0.311 Ma BP. During this period, which included an intense winter monsoon, the soil in the section had the least illite, one of the smallest kaolinite and illite/Chlorite (I/C) indices and an overall decreasing clay content. The period 0.225–0.243 Ma BP had the strongest summer monsoon over the last 0.423 Ma BP. This period had the greatest amount of illite, the highest I/C index, greater overall clay content and the strongest magnetic susceptibility signal. Additionally, this section contained the smallest mean grain size. The multi-monsoon climate cycles of alternating cold-dry and warm-moist conditions as recorded in the Chaoyang section corresponded well with multiple glaciation cycles based on deep sea sediments. This indicates that the Chaoyang section provides a record of palaeoclimate changes in northeast China that can be linked to mineralogical suites to assist in reconstructing the palaeoclimate over the Late Middle Pleistocene, and complements the global palaeoclimate records in the CLP.

Coproantigen test kits for Echinococcus spp. worms in dogs, designed for commercial use, were obtained from three different Chinese producers, and were compared with a laboratory kit using reagents from New Zealand. None of the three producers would provide details of their test validation. From a known set of dog faeces obtained at necropsy from infected and uninfected dogs, and from faeces collected from dogs necropsied in the field, results differed between the kits. For field material, the Tiankang kit showed the best specificity but lacked sensitivity. The Combined kit showed best sensitivity but lacked specificity. Results for the Haitai kit were intermediate. With samples from experimentally infected dogs, both the Haitai and Combined kits lacked sensitivity. Kits will need to be validated by the user before they can be relied on to predict progress in Echinococcus spp. control in China or in other countries.

The different effects of ethanol on insulin sensitivity may be due to complex reasons. Here, we focus on the various daily ethanol consumption frequencies in rats fed a high-fat (HF) diet and explore the possible mechanism mediated by adiponectin and AMP-activated protein kinase (AMPK). A total of thirty-six male Wistar rats were fed a HF diet and were randomly divided into three groups: those that received tap water (C); those that received ethanol via a gastric tube twice per d (E1); those that received free access to ethanol for drinking (E2). The total daily ethanol dosage in groups E1 and E2 were the same (5 g/kg per d). At the end of 18 weeks, insulin sensitivity was evaluated. Adiponectin AMPK and GLUT4 levels were determined. We found that the different administration frequencies led to markedly different plasma ethanol concentrations and there were intimate relationships between plasma ethanol concentration and insulin sensitivity. Insulin resistance was markedly improved in group E1, whereas only a slight improvement was observed in group E2. Accordingly, adiponectin, phosphorylated AMPK and GLUT4 levels were significantly increased in group E1. Based on these findings, we propose that ethanol concentration might be the major influencing factor mediating the effect of ethanol on insulin sensitivity. At a total daily dosage of 5 g/kg per d, twice daily administration of ethanol was more beneficial than continuous drinking. The protective effect of ethanol might be mediated by increased adiponectin levels, which subsequently improve the activation of AMPKα and GLUT4 expression in adipose tissue.

The objective of the present study was to investigate age-related differences in erythrocyte membrane fluidity (EMF) and changes in antioxidant capacity following supplementation. A total of seventy-four children were randomly divided into two groups: group A1 was the placebo-controlled group and group A2 was supplemented daily with 600 μg retinol, 1·0 mg β-carotene, 100 mg tocopherol, 300 mg ascorbic acid and 200 μg Se. A total of ninety young people were randomly divided into B1 and B2 groups, and ninety-one elderly subjects were divided into C1 and C2 groups. Groups B1 and C1 were placebo-controlled groups, and groups B2 and C2 were daily supplemented with 900 μg retinol, 1·5 mg β-carotene, 200 mg tocopherol, 500 mg ascorbic acid and 400 μg Se. Results showed that plasma malondialdehyde (MDA) was 5·35 μmol/l in children, which was lower than in young and elderly people. The MDA levels of the young and elderly individuals in the treated groups were significantly lower compared with the control groups, but the supplementation did not alter MDA levels in children. At baseline, there was a lower value of polarisation (ρ) and microviscosity (η) in children, indicating a higher EMF, than in both the young and elderly subjects. After the 2-month trial, the ρ and η values of young and elderly subjects in the treated groups decreased significantly in comparison with the placebo groups, indicating an increase in EMF. In conclusion, there was a background of higher MDA levels and lower EMF in young and elderly people than in children, which could be improved by antioxidant supplementation.

Experiments of the return current post installed X-pinches were carried out on the 1-MA “QiangGuang-1” facility with the purpose of understanding X-pinch characteristics under this setup and establishing X-pinch backlighting diagnostics for the wire-array Z-pinches. Different wire-array loads along with the two-wire 30 µm Mo X-pinch backlighter were tested. The X-pinches emit the X-ray radiation with the burst time variation of ± 4 ns and the bright spot size of  ~30 µm. X-ray backlighting shadowgraphy images of the over-mass and radiation-suppressed Z-pinch wire array were obtained.

In this paper, the ion jet generation from the interaction of an ultraintense laser pulse and a rear-side concave target is investigated analytically using a simple fluid model. We find that the ion expanding surface at the rear-side is distorted due to a strong charge-separation field, and that this distortion becomes dramatic with a singular cusp shown on the central axis at a critical time. The variation of the transverse ion velocity and the relative ion density diverge on the cusp, signaling the emergence of an on-axis ion jet. We have obtained analytical expressions for the critical time and the maximum velocity of the ion jet, and suggested an optimum shape for generating a collimated energetic ion jet. The above theoretical analysis has been verified by particle-in-cell (PIC) numerical simulations.

The accumulation of seed mass in soybean is affected by both genotype and environment. The aim of the present study was to measure additive, epistatic and quantitative trait locus (QTL)×environment (QE) interaction effects of QTLs on the development of 100-seed weight in a population of 143 F5 derived recombinant inbred lines (RILs) developed from the cross between the soybean cultivars ‘Charleston’ and ‘Dong Nong 594’. Broad-sense heritability of 100-seed weight from 30 days (30D) to 80D stages was 0·58, 0·52, 0·62, 0·60, 0·66 and 0·57, respectively. A total of 17 QTLs with conditional additive (a) effect and/or conditional additive×environment interaction (ae) effect at specific stages were identified in ten linkage groups by conditional mapping. Of them, only 4 QTLs had significant a effect or ae effect at different stages of seed development. Among QTLs with significant a effect, five acted positively and six acted negatively on seed development. A total of 35 epistatic pairwise QTLs of 100-seed weight were identified by conditional mapping at different developmental stages. Five pairs of QTL showed the additive×additive epistatic (aa) effect and 16 QTLs showed the aa×environment interaction (aae) effect at the different developmental stages. QTLs with aa effect as well with their environmental interaction effect appeared to vary at different developmental stages. Overall, the results indicated that 100-seed weight in soybean is under developmental, genetic and environmental control.

Chronic hepatitis C virus (HCV) infections are a significant cause of morbidity and mortality worldwide. Interferon-α2b treatment, alone or in combination with ribavirin, eliminates HCV from some patients, but patients infected with HCV genotype 1 viruses are cured less frequently than patients infected with HCV genotype 2 or 3 viruses. We report that HCV mRNA was detected and destroyed by the interferon-regulated antiviral 2′-5′ oligoadenylate synthetase/ribonuclease L pathway present in cytoplasmic extracts of HeLa cells. Ribonuclease L cleaved HCV mRNA into fragments 200 to 500 bases in length. Ribonuclease L cleaved HCV mRNA predominately at UA and UU dinucleotides within loops of predicted stem-loop structures. HCV mRNAs from relatively interferon-resistant genotypes (HCV genotypes 1a and 1b) have fewer UA and UU dinucleotides than HCV mRNAs from more interferon-sensitive genotypes (HCV genotypes 2a, 2b, 3a, and 3b). HCV 2a mRNA, with 73 more UA and UU dinucleotides than HCV 1a mRNA, was cleaved by RNase L more readily than HCV 1a mRNA. In patients, HCV 1b mRNAs accumulated silent mutations preferentially at UA and UU dinucleotides during interferon therapy. These results suggest that the sensitivity of HCV infections to interferon therapy may correlate with the efficiency by which RNase L cleaves HCV mRNA.

The thickness of the Al2O3 layer used in the magnetic tunneling junctions FM1/Al2O3/FM2 is less than 2 nm, here FM1 is for the ferromagnetic layer 1 and FM2 is for ferromagnetic layer 2. In order to obtain ultra-thin Al2O3 layer with higher breakdown voltage and pinhole free, extremely smooth surface roughness of this layer is required. The influence of the sputtering gas pressure, DC pulsed frequency, DC pulsed power, substrate bias and buffer layer on surface roughness and properties of Al thin films were studied. The single layer Al films are usually amorphous, texture (111) Al films can be obtained while using thin Ta 5 nm or Ta5/NiFe2 as underlayer. Very smooth Al thin film can be sputtered on Si/SiO2 (100) wafer with Ta/NiFe buffer layer at f=15 kHz (DC pulsed frequency) and with RF substrate biasing (Vpp is about 21 V). High quality MTJs with high MR ratio up to 44.6% and high field sensitivity up to 19.3%/Oe were finally demonstrated after optimization of thin film deposition process.