This study presents a novel investigation into the vortex dynamics of flow around a near-wall rectangular cylinder based on direct numerical simulation at $Re=1000$, marking the first in-depth exploration of these phenomena. By varying aspect ratios ($L/D = 5$, $10$, $15$) and gap ratios ($G/D = 0.1$, $0.3$, $0.9$), the study reveals the vortex dynamics influenced by the near-wall effect, considering the incoming laminar boundary layer flow. Both $L/D$ and $G/D$ significantly influence vortex dynamics, leading to behaviours not observed in previous bluff body flows. As $G/D$ increases, the streamwise scale of the upper leading edge (ULE) recirculation grows, delaying flow reattachment. At smaller $G/D$, lower leading edge (LLE) recirculation is suppressed, with upper Kelvin–Helmholtz vortices merging to form the ULE vortex, followed by instability, differing from conventional flow dynamics. Larger $G/D$ promotes the formation of an LLE shear layer. An intriguing finding at $L/D = 5$ and $G/D = 0.1$ is the backward flow of fluid from the downstream region to the upper side of the cylinder. At $G/D = 0.3$, double-trailing-edge vortices emerge for larger $L/D$, with two distinct flow behaviours associated with two interactions between gap flow and wall recirculation. These interactions lead to different multiple flow separations. For $G/D = 0.9$, the secondary vortex (SV) from the plate wall induces the formation of a tertiary vortex from the lower side of the cylinder. Double-SVs are observed at $L/D = 5$. Frequency locking is observed in most cases, but is suppressed at $L/D = 10$ and $G/D = 0.9$, where competing shedding modes lead to two distinct evolutions of the SV.

Bombyx mori Tryptophanyl-tRNA synthetase (BmWARS) belongs to the family of Ic-like aminoacyl-tRNA synthetases (aaRSs), whose specific recognition of the substrate Trp, tRNA, maintains the fidelity of protein synthesis. In this study, BmWARS was cloned and characterized from the midgut of the silkworm, Bombyx mori, resulting in an open reading frame (ORF) with a full length of 1,149 bp, which can encode 382 Aa. BmWARS is localized in the cytoplasm, and is expressed in all tissues of the silkworm, with higher expression in the testis, ovary, silk gland and malpighian tubule. The expression of BmWARS was significantly up-regulated in the midgut and silk gland after infection with Bombyx mori nuclear polyhedrosis virus (BmNPV). In addition, overexpression of BmWARS inhibited BmNPV infection and replication extremely significantly, while interference with BmWARS expression promoted BmNPV infection and replication. Analysis of the immune pathways in which BmWARS may be involved revealed that the expression of the key genes of the PI3K-Akt pathway, BmPI3K, BmAkt, BmPDK1, BmeIF4E, BmS6, and p-Akt protein was significantly reduced, whereas the expression of BmPTEN, BmFoxO, and BmCaspase9 was significantly increased in the cells that overexpressed BmWARS and were infected with BmNPV. Meanwhile, the results of the study interfering with the expression of BmWARS were completely opposite to those of the study overexpressing BmWARS. This is the first report that BmWARS has antiviral effects in Bombyx mori. Moreover, BmWARS inhibits BmNPV infection and replication in Bombyx mori cells by promoting apoptosis and inhibiting cell proliferation.

With wide-field phased array feed technology, the Australian Square Kilometre Array Pathfinder (ASKAP) is ideally suited to search for seemingly rare radio transient sources that are difficult to discover previous-generation narrow-field telescopes. The Commensal Real-time ASKAP Fast Transient (CRAFT) Survey Science Project has developed instrumentation to continuously search for fast radio transients (duration $\lesssim$ 1 s) with ASKAP, with a particular focus on finding and localising fast radio bursts (FRBs). Since 2018, the CRAFT survey has been searching for FRBs and other fast transients by incoherently adding the intensities received by individual ASKAP antennas, and then correcting for the impact of frequency dispersion on these short-duration signals in the resultant incoherent sum (ICS) in real time. This low-latency detection enables the triggering of voltage buffers, which facilitates the localisation of the transient source and the study of spectro-polarimetric properties at high time resolution. Here we report the sample of 43 FRBs discovered in this CRAFT/ICS survey to date. This includes 22 FRBs that had not previously been reported: 16 FRBs localised by ASKAP to $\lesssim 1$ arcsec and 6 FRBs localised to $\sim 10$ arcmin. Of the new arcsecond-localised FRBs, we have identified and characterised host galaxies (and measured redshifts) for 11. The median of all 30 measured host redshifts from the survey to date is $z=0.23$. We summarise results from the searches, in particular those contributing to our understanding of the burst progenitors and emission mechanisms, and on the use of bursts as probes of intervening media. We conclude by foreshadowing future FRB surveys with ASKAP using a coherent detection system that is currently being commissioned. This will increase the burst detection rate by a factor of approximately ten and also the distance to which ASKAP can localise FRBs.

EXOSC10 is an exosome-associated ribonuclease that degrades and processes a wide range of transcripts in the nucleus. The initial segment (IS) of the epididymis is crucial for sperm transport and maturation in mice by affecting the absorption and secretion that is required for male fertility. However, the role of EXOSC10 ribonuclease-mediated RNA metabolism within the IS in the regulation of gene expression and sperm maturation remains unknown. Herein, we established an Exosc10 conditional knockout (Exosc10 cKO) mouse model by crossing Exosc10F/F mice with Lcn9-Cre mice which expressed recombinase in the principal cells of IS as early as post-natal day 17. Morphological and histological analyses revealed that Exosc10 cKO males had normal spermatogenesis and development of IS. Moreover, the sperm concentration, morphology, motility, and frequency of acrosome reactions in the cauda epididymides of Exosc10 cKO mice were comparable with those of control mice. Thus, Exosc10 cKO males had normal fertility. Collectively, our genetic mouse model and findings demonstrate that loss of EXOSC10 in the IS of epididymis is dispensable for sperm maturation and male fertility.

Er:CaF2 crystals are crucial gain media for producing 3 μm mid-infrared (MIR) lasers pumped by 976 nm continuous-wave (CW) lasers owing to their low phonon energy and high conversion efficiency. This study investigated the damage characteristics and mechanism of Er:CaF2 crystals irradiated with a 976 nm CW laser. The laser-induced damage threshold of Er:CaF2 crystals with different Er3+ doping levels was tested; the damage morphology consists of a series of regular 70° cracks related to the angle of the crystal slip system on the surface. A finite-element model was used to calculate the temperature and stress fields of the crystals. The results indicated that the damage can be attributed to surface tensile stresses caused by the temperature gradient, and crystals with higher doping concentrations were more susceptible to damage owing to stronger light absorption. These findings provide valuable insights into the development of high-power MIR lasers.

Solving the three-dimensional boundary layer equations carries theoretical significance and practical applications, which also poses substantial challenges due to its inherent complexity. In this paper, the laminar boundary layer equations for the symmetry plane of three-dimensional bodies are derived in an orthogonal curvilinear coordinate system associated with the principal curvatures. The derivation of the boundary layer equations is based not only on the common symmetric properties of the flow, as given by Hirschel et al. (Three-Dimensional Attached Viscous Flow, 2014, Academic Press, pp. 183–187), but also incorporates the geometric symmetry properties of the body. The derived equations are more representative and simplified. Notably, these equations can degenerate to a form consistent with or equivalent to the commonly used boundary layer equations for special bodies such as flat plates, cones and spheres. Furthermore, for hypersonic flows, the crossflow velocity gradient at the boundary layer edge on the symmetry plane is derived based on Newtonian theory. Subsequently, this parameter can provide the necessary boundary condition needed for solving the boundary layer equations using existing methods. Finally, as examples, the equations developed in this paper are solved using the difference-differential method for several typical three-dimensional blunt shapes that appeared on hypersonic vehicles. They prove to be useful in the analysis and interpretation of boundary layer flow characteristics in the symmetry plane of blunt bodies.

Currently, there is an increasing demand for parallel mechanisms with fewer inputs and more outputs in aerospace, antennas, and recreational facilities. Therefore, this paper proposes a new parallel mechanism (PM) with a separation of constraints and drives, facilitating centralized drive management. Based on screw theory, the type synthesis of new parallel mechanisms with 3T (T representing translation), 3R (R representing revolute), 2T1R, and 2R1T is proposed. Three-degree-of-freedom (3-DOF) parallel mechanisms with fewer inputs and multiple outputs are proposed. Taking the 3RPS-PPPS parallel mechanism as an example, the closed-loop vector method is employed to solve for the lengths of actuated branches. A complete Jacobi matrix is constructed. The motion/force transmission performance of the 3RRS/PPPS parallel mechanism is better than the 3RRS parallel mechanism. Centralized management of drive branches greatly reduces the number of drives, making maintenance and repair easier. It has many application scenarios in antennas, recreational facilities, and other occasions.

The influence of free-stream conicity on the various aspects of the flow over a spherical test model is examined using both analytical and numerical methods. For the analytical method, a simple closed-form analytical model is assembled. Six different free-stream conditions with different Mach numbers, Reynolds numbers and thermochemistry are tested at four different degrees of conicity corresponding to those which can realistically be encountered in experiments. It is found that the results around the stagnation point are mostly insensitive to the flow condition and gas type, except for some mild non-equilibrium effects, and excellent agreement between the analytical and numerical results exists. The shock stand-off distance on the stagnation streamline is shown to decrease with increasing conicity. This decrease increases the tangential velocity gradient at the stagnation point, increasing the stagnation point heat flux and decreasing the stagnation point boundary layer thickness. The free-stream conicity is also found to alter the normalized distributions of the shock stand-off distance, heat flux, surface pressure and boundary layer thickness with the angle from the stagnation point. In general, increasing the conicity magnifies the slope of these distributions. Regarding the boundary layer transition, it is found that, if it occurs in a uniform free stream, it would also occur in a conical free stream, albeit with the transition point shifted upstream closer to the stagnation point due to the increase in the boundary layer edge tangential velocity. Overall, considering the relevant experimental uncertainties, corrections for free-stream conicity are generally recommended when larger test models are used.

The research field of online informal English learning has revealed associations of various informal digital English activities and second language vocabulary development. However, most of these studies have regarded digital resources as uniform entities when investigating their potential for vocabulary development and have failed to consider learners’ idiosyncratic interaction with the resources driven by self-defined purposes of use. Informed by the uses and gratifications theory, this study explored how three purposes of extramural digital experience (entertainment, socialization and information) relate to vocabulary knowledge, based on the survey responses from 322 undergraduate Chinese EFL learners and their receptive vocabulary knowledge. PLS-SEM analysis uncovered differential associations of the three media use purposes with receptive vocabulary knowledge. The study also revealed that the associations between the purposes of informal digital activities and vocabulary knowledge differed depending on whether the vocabulary was high frequency or low frequency. Additionally, it was found that the strategic use of digital resources, in terms of cognitive attention to and processing of lexical information that are facilitative of vocabulary learning during and/or after the interaction, played a significant moderating role in the relationship between digital activities for information purposes and receptive knowledge of high-frequency vocabulary. The findings highlight the importance of considering media use purposes in future research and pedagogical practices.

The numerical investigation focuses on the flow patterns around a rectangular cylinder with three aspect ratios ($L/D=5$, $10$, $15$) at a Reynolds number of $1000$. The study delves into the dynamics of vortices, their associated frequencies, the evolution of the boundary layer and the decay of the wake. Kelvin–Helmholtz (KH) vortices originate from the leading edge (LE) shear layer and transform into hairpin vortices. Specifically, at $L/D=5$, three KH vortices merge into a single LE vortex. However, at $L/D=10$ and $15$, two KH vortices combine to form a LE vortex, with the rapid formation of hairpin vortex packets. A fractional harmonic arises due to feedback from the split LE shear layer moving upstream, triggering interaction with the reverse flow. Trailing edge (TE) vortices shed, creating a Kármán-like street in the wake. The intensity of wake oscillation at $L/D=5$ surpasses that in the other two cases. Boundary layer transition occurs after the saturation of disturbance energy for $L/D=10$ and $15$, but not for $L/D=5$. The low-frequency disturbances are selected to generate streaks inside the boundary layer. The TE vortex shedding induces the formation of a favourable pressure gradient, accelerating the flow and fostering boundary layer relaminarization. The self-similarity of the velocity defect is observed in all three wakes, accompanied by the decay of disturbance energy. Importantly, the decrease in the shedding frequency of LE (TE) vortices significantly contributes to the overall decay of disturbance energy. This comprehensive exploration provides insights into complex flow phenomena and their underlying dynamics.

In order to provide a theoretical foundation for the utilization of tailings as supplementary cementitious materials, the pozzolanic activity of muscovite—a typical mineral phase in tailings—before and after mechanical activation was investigated. In this study, significant pozzolanic activity of muscovite was obtained as a result of the structural and morphological changes that were induced by mechanical activation. The activated muscovite that was obtained after mechanical activation for 160 min satisfies the requirements for use as an active supplementary cementitious material, and the main characteristics of the pozzolana were as follows: median particle size (D50) of 11.7 μm, BET specific surface area of 28.82 m2 g−1, relative crystallinity of 14.99%, and pozzolanic activity index of 94.36%. Continuous grinding led to a gradual reduction in the relative crystallinity and an increase in the pozzolanic activity index due to the dehydroxylation reaction induced by mechanical activation, which occurred despite the fact that the specific surface area showed a decreasing trend when the grinding time was prolonged. Mechanically activated muscovite exhibited the capacity to react with calcium hydroxide to form calcium silicate hydrate, which is a typical characteristic of pozzolana. This experimental study provided a theoretical basis for evaluating the pozzolanic activity of muscovite using mechanical activation.

In order to minimize the initial energy storage of tens of MA-class Z-pinch accelerators, an intelligent optimization method was developed based on the transmission line code circuit model and PSOGSA algorithm. Using several input parameters, the four overall parameters of the Z-pinch accelerator could be fast determined, including the connection and parallel combination of LTD cavities, the outer radius of the stack-MITL system, and electrical length of monolithic radial transmission lines. The optimization method has been verified by comparing the results with the Z-300 and Z-800 conceptual designs. By means of this intelligent optimization, some factors that affect the initial energy storage on high-current Z-pinch accelerators have been investigated, such as the operating electrical fields, the diameter of the stack-MITL system, and the inner diameter of the LTD cavity. The suggestions for designing relatively low-cost, efficient LTD-based accelerators have been proposed.

A transmission line circuit model was conducted to compare the performances of the two-level 2.5 Ω magnetically insulated transmission lines (MITLs) system of a 5-MA linear-transformer-driver (LTD) accelerator for two kinds of typical loads, including bremsstrahlung electron beam diodes and Z-pinch loads. Both the electron current loss in the pulse front during the magnetic insulation setup process and the electron flow distribution in the magnetic insulation steady state were analyzed. When the accelerator drives an electron beam diode load with impedance of 1.20 Ω (a single level), the duration of the magnetic insulation setup is about 12 ns, the current loss is about 130 kA in a single MITL level, the maximum electron flow current is about 50 kA in the end of MITL, and its amplitude decreases gradually after the steady magnetic insulation is established. When the accelerator drives a Z-pinch load with length of 1.5 cm, radius of 1.2 cm, and mass of 0.3 mg/cm, the duration of the magnetic insulation setup is almost zero, the maximum electron flow current in the end of MITL can reach about 55 kA (a single level), and the waveform of the electron flow resembles a saddle shape, which reaches the peak at the pinch stagnation time.