We present the Pilot Survey Phase 2 data release for the Wide-field ASKAP L-band Legacy All-sky Blind surveY (WALLABY), carried-out using the Australian SKA Pathfinder (ASKAP). We present 1760 H i detections (with a default spatial resolution of 30′′) from three pilot fields including the NGC 5044 and NGC 4808 groups as well as the Vela field, covering a total of $\sim 180$ deg$^2$ of the sky and spanning a redshift up to $z \simeq 0.09$. This release also includes kinematic models for over 126 spatially resolved galaxies. The observed median rms noise in the image cubes is 1.7 mJy per 30′′ beam and 18.5 kHz channel. This corresponds to a 5$\sigma$ H i column density sensitivity of $\sim 9.1\times10^{19}(1 + z)^4$ cm$^{-2}$ per 30′′ beam and $\sim 20$ km s$^{-1}$ channel and a 5$\sigma$ H i mass sensitivity of $\sim 5.5\times10^8 (D/100$ Mpc)$^{2}$ M$_{\odot}$ for point sources. Furthermore, we also present for the first time 12′′ high-resolution images (“cut-outs”) and catalogues for a sub-sample of 80 sources from the Pilot Survey Phase 2 fields. While we are able to recover sources with lower signal-to-noise ratio compared to sources in the Public Data Release 1, we do note that some data quality issues still persist, notably, flux discrepancies that are linked to the impact of side lobes associated with the dirty beams due to inadequate deconvolution. However, in spite of these limitations, the WALLABY Pilot Survey Phase 2 has already produced roughly a third of the number of HIPASS sources, making this the largest spatially resolved H i sample from a single survey to date.

Ultra-processed plant-based foods, such as plant-based burgers, have gained in popularity. Particularly in the out-of-home (OOH) environment, evidence regarding their nutritional profile and environmental sustainability is still evolving. Plant-based burgers available at selected OOH sites were randomly sampled in Amsterdam, Copenhagen, Lisbon and London. Plant-based burgers (patty, bread and condiment) (n 41) were lab analysed for their energy, macronutrients, amino acids and minerals content per 100 g and serving and were compared with reference values. For the plant-based burgers, the median values per 100 g were 234 kcal, 20·8 g carbohydrates, 3·5 g dietary fibre and 12·0 g fat, including 0·08 g TFS and 2·2 g SFA. Protein content was 8·9 g/100 g, with low protein quality according to amino acid composition. Median Na content was 389 mg/100 g, equivalent to 1 g salt. Compared with references, the median serving provided 31% of energy intake based on a 2000 kcal per day and contributed to carbohydrates (17–28%), dietary fibre (42%), protein (40%), total fat (48%), SFA (26%) and Na (54%). One serving provided 15–23% of the reference values for Ca, K and Mg, while higher contributions were found for Zn, Mn, P and Fe (30–67%). The ultra-processed plant-based burgers provide protein, dietary fibre and essential minerals and contain relatively high levels of energy, Na and total fats. The amino acid composition indicated low protein quality. The multifaceted nutritional profile of plant-based burgers highlights the need for manufacturers to implement improvements to better support healthy dietary habits, including reducing energy, Na and total fats.

Homeless shelter residents and staff may be at higher risk of SARS-CoV-2 infection. However, SARS-CoV-2 infection estimates in this population have been reliant on cross-sectional or outbreak investigation data. We conducted routine surveillance and outbreak testing in 23 homeless shelters in King County, Washington, to estimate the occurrence of laboratory-confirmed SARS-CoV-2 infection and risk factors during 1 January 2020–31 May 2021. Symptom surveys and nasal swabs were collected for SARS-CoV-2 testing by RT-PCR for residents aged ≥3 months and staff. We collected 12,915 specimens from 2,930 unique participants. We identified 4.74 (95% CI 4.00–5.58) SARS-CoV-2 infections per 100 individuals (residents: 4.96, 95% CI 4.12–5.91; staff: 3.86, 95% CI 2.43–5.79). Most infections were asymptomatic at the time of detection (74%) and detected during routine surveillance (73%). Outbreak testing yielded higher test positivity than routine surveillance (2.7% versus 0.9%). Among those infected, residents were less likely to report symptoms than staff. Participants who were vaccinated against seasonal influenza and were current smokers had lower odds of having an infection detected. Active surveillance that includes SARS-CoV-2 testing of all persons is essential in ascertaining the true burden of SARS-CoV-2 infections among residents and staff of congregate settings.

We present the Widefield ASKAP L-band Legacy All-sky Blind surveY (WALLABY) Pilot Phase I Hi kinematic models. This first data release consists of Hi observations of three fields in the direction of the Hydra and Norma clusters, and the NGC 4636 galaxy group. In this paper, we describe how we generate and publicly release flat-disk tilted-ring kinematic models for 109/592 unique Hi detections in these fields. The modelling method adopted here—which we call the WALLABY Kinematic Analysis Proto-Pipeline (WKAPP) and for which the corresponding scripts are also publicly available—consists of combining results from the homogeneous application of the FAT and 3DBarolo algorithms to the subset of 209 detections with sufficient resolution and $S/N$ in order to generate optimised model parameters and uncertainties. The 109 models presented here tend to be gas rich detections resolved by at least 3–4 synthesised beams across their major axes, but there is no obvious environmental bias in the modelling. The data release described here is the first step towards the derivation of similar products for thousands of spatially resolved WALLABY detections via a dedicated kinematic pipeline. Such a large publicly available and homogeneously analysed dataset will be a powerful legacy product that that will enable a wide range of scientific studies.

We developed an agent-based model using a trial emulation approach to quantify effect measure modification of spillover effects of pre-exposure prophylaxis (PrEP) for HIV among men who have sex with men (MSM) in the Atlanta-Sandy Springs-Roswell metropolitan area, Georgia. PrEP may impact not only the individual prescribed, but also their partners and beyond, known as spillover. We simulated a two-stage randomised trial with eligible components (≥3 agents with ≥1 HIV+ agent) first randomised to intervention or control (no PrEP). Within intervention components, agents were randomised to PrEP with coverage of 70%, providing insight into a high PrEP coverage strategy. We evaluated effect modification by component-level characteristics and estimated spillover effects on HIV incidence using an extension of randomisation-based estimators. We observed an attenuation of the spillover effect when agents were in components with a higher prevalence of either drug use or bridging potential (if an agent acts as a mediator between ≥2 connected groups of agents). The estimated spillover effects were larger in magnitude among components with either higher HIV prevalence or greater density (number of existing partnerships compared to all possible partnerships). Consideration of effect modification is important when evaluating the spillover of PrEP among MSM.

An individual's risk of infection from an infectious agent can depend on both the individual's own risk and protective factors and those of individuals in the same community. We hypothesize that an individual's exposure to an infectious agent is associated with the risks of infection of those living nearby, whether their risks are modified by pharmaceutical interventions or by other factors, because of the potential for transmission from them. For example, unvaccinated individuals living in a highly vaccinated community can benefit from indirect protection, or living near more children in a typhoid-endemic region (where children are at highest risk) might result in more exposure to typhoid. We tested this hypothesis using data from a cluster-randomized typhoid vaccine trial. We first estimated each individual's relative risk of confirmed typhoid outcome using their vaccination status and age. We defined a new covariate, potential exposure, to be the sum of the relative risks of all who live within 100 m of each person. We found that potential exposure was significantly associated with an individual's typhoid outcome, and adjusting for potential exposure affected estimates of vaccine efficacy. We suggest that it is useful and feasible to adjust for spatially heterogeneous distributions of individual-level risk factors, but further work is required to develop and test such approaches.

Efficient nutrient use is critical to ensure economical crop production while minimizing the impact of excessive nutrient applications on the environment. Nitrogen (N) is a key component of agricultural production, both as an input to support crop production and as a waste product of livestock production. Increasing concern for future sustainability of agricultural production and preservation of the natural resource base has led to the development of nutrient budgets as indicators and policy instruments for nutrient management. Nutrient budgets for N have been developed by the Organization for Economic Co-operation and Development (OECD) as agri-environmental indicators to compare the evolving conditions in member states, and are also used by the US Department of Agriculture Natural Resource Conservation Service (USDA-NRCS) to develop nutrient management plans. Here, we examine the crop and animal production systems, drivers impacting management choices, and the outcome of those choices to assess the utility of gross annual N balances in tracking the progress of management decisions in minimizing the environmental impact of agricultural production systems. We use as case studies two very different agronomic production systems: Mississippi, USA and Poland. State and country level data from the US Department of Agriculture and OECD databases are used to develop data for the years 1998–2008, and gross annual N balances are computed. Examination of agricultural production practices reveals that the gross annual N balance is a useful tool in identifying differences in the magnitude and trends in N within agricultural systems over large areas. Significant differences in the magnitude of the N budget were observed between the highly diversified, small-scale agriculture common to Poland, and the large-scale, intensive agriculture of Mississippi. It is noted that use of N balance indices can be problematic if the primary intent is to reveal the impact of economic drivers, such as crop prices, or management choices, such as tillage or crop rotation. Changes in cropping systems in response to commodity prices that improve N balance can be masked by detrimental growing conditions, including edaphic, biotic and weather conditions, that are outside of the producers’ control. Moreover, use of large area-scale indices such as country or state-wide balances may mask the severity of localized nutrient imbalances that result from regionalized production systems that overwhelm the nutrient balance, such as confinement livestock production. Development of a policy to address environmental impact and establish sustainable production systems must consider the year-to-year variability of drivers impacting agricultural production, and the spatial heterogeneity of nutrient imbalance.

In order to successfully build three-dimensional shapes by hot-melt inkjet deposition it is essential to control the building block characteristics, i.e., the deposit geometry, dimensions and fine feature resolution. The deposit formation is mainly dependent on the material systems and their jetting behaviour. It is therefore crucial to understand how the jet formation is affected by the inks 'rheological properties and how to manipulate the jet-head driving parameters to achieve optimum deposition conditions. This paper reports our investigations with a model jet firing station, about the influence of driving parameters of hot-melt drop-on-demand print-heads (e.g., pulse shape and frequency) on the jet and deposit formation characteristics, for both unfilled and powder loaded vehicles.

A conventional rapid prototyping technology has been used to build prototypes using direct deposition through a drop-on-demand ink-jet printing system. Al2O3 - filled waxes have been developed with viscosity values close to those of the materials used in commercial printing systems. Commercial dispersants based on stearic acid and sterylamine have been studied and stable ceramic suspensions with ceramic volume fractions in the range 20–40 volume% produced with suitable viscosity. A suspension of 20% Al2O3 in an alkane wax has been successfully printed.

Conductor development is one of the major long term goals in high temperature superconductor research. In this paper we report on two promising processing technologies that have been utilized to produce superconducting HTS conductors. First, melt spun YBa2Cu3O7 fibers rapid thermal processed for 1‐8 sec at 950 to 1075°C have Tc's to 92 K, Jc's to 1100 A/cm2 and the orthorhombic twinned morphology typical for high quality YBa2Cu3O7 A processing matrix of time, temperature and composition for these fibers shows that slightly CuO‐rich starting compositions give the best results. Second, silver tube encapsulated wires of Bi1.7Pb0.3Sr2Ca2Cu3O10 have been made by extrusion, wire drawing and cold rolling. The resulting tapes show orientation of the crystallites, zero resistance up to 100K and improved magnetic hysteresis above 50 K. The combination of mechanical reprocessing and extended thermal anneals near 850°C appears to significantly improve these materials.