Beryl from Xuebaoding, Sichuan Province, western China is known for its unusual tabular habit and W–Sn–Be paragenesis in a greisen-type deposit. The crystals are typically colourless transparent to pale blue, often with screw dislocations of hexagonal symmetry on the (0001) crystal faces. Combining electron microprobe analyses and laser ablation inductively coupled plasma mass spectrometry with single-crystal X-ray diffraction (XRD), correlated with Raman and micro-infrared (IR) spectroscopy and imaging, the crystal chemical characteristics are determined. The contents of Na+ (0.24–0.38 atoms per formula unit (apfu)) and Li+ up to 0.38 apfu are at the high end compared to beryl from other localities worldwide. Li+ substitution for Be2+ on the tetrahedral (T2) site is predominantly charge balanced by Na+ on the smaller channel (C2) site, with Na+ ranging from 91.5% to 99.7% (apfu) of the sum of all other alkali elements. Cs+ and minor Rb+ and K+ primarily charge balance the minor M2+ substitution for Al3+ at the A site; all iron at the A site is suggested to be trivalent. The a axis ranges from 9.2161(2) to 9.2171(4) Å, with unit-cell volume from 678.03(3) to 678.48(7) Å3. The c/a ratio of 1.0002–1.0005 is characteristic for T2-type beryl with unit-cell parameters controlled primarily by Be2+ substitution. Transmission micro-IR vibrational spectroscopy and imaging identifies coordination of one or two water molecules to Na+ (type IIs and type IId, respectively) as well as alkali free water (type I). Based on IR absorption cross section and XRD a C1 site water content of 0.4–0.5 apfu is derived, i.e. close to 50% site occupancy. Secondary crystal phases with a decrease in Fe and Mg, yet increase in Na, suggest early crystallisation of aquamarine, with goshenite being late. With similar crystal chemistry to beryl of columnar habit from other localities worldwide, the tabular habit of Xuebaoding beryl seems to be unrelated to chemical composition and alkali content.

In an earlier article we reviewed the latest research on the relationship between religious involvement and mental health, the effects of religiosity on mental health and well-being over time and the impact of religious interventions. Here we focus on clinical applications that may be useful to psychiatrists and other mental health professionals. We discuss general clinical applications relevant to all patients (e.g. taking a spiritual history, supporting/encouraging religious beliefs, referring to clergy), violations of clinician–patient boundaries and the need to ensure that religious/spiritual interventions are patient-centred. We describe evidence-based religious interventions and how to identify appropriate patients for this approach. Finally, we explore situations in which religious beliefs and practices may be a problem, not a resource, and make recommendations on how to address such cases. Case vignettes illustrate clinical situations that mental health professionals are likely to encounter. Although the focus is on the North American context, we note how practice and culture in the UK may differ.

This paper describes a model of electron energization and cyclotron-maser emission applicable to astrophysical magnetized collisionless shocks. It is motivated by the work of Begelman, Ergun and Rees [Astrophys. J. 625, 51 (2005)] who argued that the cyclotron-maser instability occurs in localized magnetized collisionless shocks such as those expected in blazar jets. We report on recent research carried out to investigate electron acceleration at collisionless shocks and maser radiation associated with the accelerated electrons. We describe how electrons accelerated by lower-hybrid waves at collisionless shocks generate cyclotron-maser radiation when the accelerated electrons move into regions of stronger magnetic fields. The electrons are accelerated along the magnetic field and magnetically compressed leading to the formation of an electron velocity distribution having a horseshoe shape due to conservation of the electron magnetic moment. Under certain conditions the horseshoe electron velocity distribution function is unstable to the cyclotron-maser instability [Bingham and Cairns, Phys. Plasmas 7, 3089 (2000); Melrose, Rev. Mod. Plasma Phys. 1, 5 (2017)].

The influence of a strong external magnetic field on the collimation of a high Mach number plasma flow and its collision with a solid obstacle is investigated experimentally and numerically. The laser irradiation ( $I\sim 2\times 10^{14}~\text{W}\cdot \text{cm}^{-2}$ ) of a multilayer target generates a shock wave that produces a rear side plasma expanding flow. Immersed in a homogeneous 10 T external magnetic field, this plasma flow propagates in vacuum and impacts an obstacle located a few mm from the main target. A reverse shock is then formed with typical velocities of the order of 15–20 $\pm$ 5 km/s. The experimental results are compared with 2D radiative magnetohydrodynamic simulations using the FLASH code. This platform allows investigating the dynamics of reverse shock, mimicking the processes occurring in a cataclysmic variable of polar type.

We examine how to sensibly integrate spirituality into the care of older adult medical and psychiatric patients from a multi-cultural perspective. First, definitions of spirituality and spiritual integration are provided. Second, we examine the logic that justifies spiritual integration, including research that demonstrates an association between religious/spiritual (R/S) involvement and health in older adults and research that indicates widespread spiritual needs in later life and the consequences of addressing or ignoring them. Third, we describe how and when to integrate spirituality into the care of older adults, i.e. taking a spiritual history to identify spiritual needs and then mobilizing resources to meet those needs. Fourth, we examine the consequences of integrating spirituality on the well-being of patients and on the doctor–patient relationship. Finally, we describe boundaries in addressing R/S issues that clinicians should be cautious about violating. Resources will be provided to assist with all of the above.

A new target design is presented to model high-energy radiative accretion shocks in polars. In this paper, we present the experimental results obtained on the GEKKO XII laser facility for the POLAR project. The experimental results are compared with 2D FCI2 simulations to characterize the dynamics and the structure of plasma flow before and after the collision. The good agreement between simulations and experimental data confirms the formation of a reverse shock where cooling losses start modifying the post-shock region. With the multi-material structure of the target, a hydrodynamic collimation is exhibited and a radiative structure coupled with the reverse shock is highlighted in both experimental data and simulations. The flexibility of the laser energy produced on GEKKO XII allowed us to produce high-velocity flows and study new and interesting radiation hydrodynamic regimes between those obtained on the LULI2000 and Orion laser facilities.

In this paper, we present a model characterizing the interaction of a radiative shock (RS) with a solid material, as described in a recent paper (Koenig et al., Phys. Plasmas, 24, 082707 (2017)), the new model is then related to recent experiments performed on the GEKKO XII laser facility. The RS generated in a xenon gas cell propagates towards a solid obstacle that is ablated by radiation coming from the shock front and the radiative precursor, mimicking processes occurring in astrophysical phenomena. The model presented here calculates the dynamics of the obstacle expansion, which depends on several parameters, notably the geometry and the temperature of the shock. All parameters required for the model have been obtained from experiments. Good agreement between experimental data and the model is found when spherical geometry is taken into account. As a consequence, this model is a useful and easy tool to infer parameters from experimental data (such as the shock temperature), and also to design future experiments.

The mean, trend and variability of net snow accumulation in firn cores are often used to validate model output, develop remote-sensing algorithms and quantify ice-sheet surface mass balance. Thus, accurately defining uncertainties associated with these in situ measurements is critical. In this study, we apply statistical simulation methods to quantify the uncertainty in firn-core accumulation data due to the uncertainty in depth–age scales. The methods are applied to a suite of firn cores from central West Antarctica. The results show that uncertainty in depth–age scales can give rise to spurious trends in accumulation that are the same order of magnitude as accumulation trends reported in West Antarctica. The depth–age scale uncertainties also significantly increase the apparent interannual accumulation variability, so these uncertainties must first be accounted for before using firn-core data to assess such processes as small-spatial-scale variability. Better quantification of error in accumulation will improve our ability to meaningfully compare firn-core data across different regions of the ice sheet, and provide appropriate targets for calibration and/or validation of model output and remote-sensing data.

We have developed a new radiography setup with a short-pulse laser-driven x-ray source. Using a radiography axis perpendicular to both long- and short-pulse lasers allowed optimizing the incident angle of the short-pulse laser on the x-ray source target. The setup has been tested with various x-ray source target materials and different laser wavelengths. Signal to noise ratios are presented as well as achieved spatial resolutions. The high quality of our technique is illustrated on a plasma flow radiograph obtained during a laboratory astrophysics experiment on POLARs.

Biobank data and samples frequently endure beyond the life of the individual who provided the sample; this is particularly true for biorepositories that archive data and samples from cancer patients. Those data and samples may be used for research, including after the death of the individual. When the research produces genetic research results (a term used here to include incidental findings and individual research results) that have potential health or reproductive importance for the individual who provided the sample, the results may also have importance for blood relatives. This raises the question of whether the research results should be shared with relatives, at their request or at the initiative of the researchers. The issues are complex even when the research participant is alive, but are particularly challenging after the death of the individual whose data and sample are archived, as the individual may not have been asked their preferences about sharing with family, including after death. Even if the individual’s preferences on sharing have been elicited, investigators and biobank directors may be concerned about withholding genetic research results from relatives that are of potential health significance.

The Murchison Widefield Array is a Square Kilometre Array Precursor. The telescope is located at the Murchison Radio–astronomy Observatory in Western Australia. The MWA consists of 4 096 dipoles arranged into 128 dual polarisation aperture arrays forming a connected element interferometer that cross-correlates signals from all 256 inputs. A hybrid approach to the correlation task is employed, with some processing stages being performed by bespoke hardware, based on Field Programmable Gate Arrays, and others by Graphics Processing Units housed in general purpose rack mounted servers. The correlation capability required is approximately 8 tera floating point operations per second. The MWA has commenced operations and the correlator is generating 8.3 TB day−1 of correlation products, that are subsequently transferred 700 km from the MRO to Perth (WA) in real-time for storage and offline processing. In this paper, we outline the correlator design, signal path, and processing elements and present the data format for the internal and external interfaces.

Significant new opportunities for astrophysics and cosmology have been identified at low radio frequencies. The Murchison Widefield Array is the first telescope in the southern hemisphere designed specifically to explore the low-frequency astronomical sky between 80 and 300 MHz with arcminute angular resolution and high survey efficiency. The telescope will enable new advances along four key science themes, including searching for redshifted 21-cm emission from the EoR in the early Universe; Galactic and extragalactic all-sky southern hemisphere surveys; time-domain astrophysics; and solar, heliospheric, and ionospheric science and space weather. The Murchison Widefield Array is located in Western Australia at the site of the planned Square Kilometre Array (SKA) low-band telescope and is the only low-frequency SKA precursor facility. In this paper, we review the performance properties of the Murchison Widefield Array and describe its primary scientific objectives.

The Murchison Widefield Array (MWA) is one of three Square Kilometre Array Precursor telescopes and is located at the Murchison Radio-astronomy Observatory in the Murchison Shire of the mid-west of Western Australia, a location chosen for its extremely low levels of radio frequency interference. The MWA operates at low radio frequencies, 80–300 MHz, with a processed bandwidth of 30.72 MHz for both linear polarisations, and consists of 128 aperture arrays (known as tiles) distributed over a ~3-km diameter area. Novel hybrid hardware/software correlation and a real-time imaging and calibration systems comprise the MWA signal processing backend. In this paper, the as-built MWA is described both at a system and sub-system level, the expected performance of the array is presented, and the science goals of the instrument are summarised.