Hybrid manufacturing enables to overcome additive manufacturing (AM) constraints regarding the maximum feasible part dimension and/or complexity through part separation and subsequent adhesive joining of AM sub-parts. To ensure structural integrity of the joint at a minimum use of substrate volume, the AM inherent freedom of design can be exploited by realizing 3D micro scarf adhesive joints. The performance of this novel adhesive joint design was assessed by conducting optical measurements and static tensile tests using samples fabricated by laser-based powder bed fusion of metals (PBF-LB/M).

Misinformation presents a significant societal problem. To measureindividuals’ susceptibility to misinformation and study its predictors,researchers have used a broad variety of ad-hoc item sets, scales, questionframings, and response modes. Because of this variety, it remains unknownwhether results from different studies can be compared (e.g., in meta-analyses).In this preregistered study (US sample; N = 2,622), we comparefive commonly used question framings (eliciting perceived headline accuracy,manipulativeness, reliability, trustworthiness, and whether a headline is realor fake) and three response modes (binary, 6-point and 7-point scales), usingthe psychometrically validated Misinformation Susceptibility Test (MIST). Wetest 1) whether different question framings and response modes yield similarresponses for the same item set, 2) whether people’s confidence in theirprimary judgments is affected by question framings and response modes, and 3)which key psychological factors (myside bias, political partisanship, cognitivereflection, and numeracy skills) best predict misinformation susceptibilityacross assessment methods. Different response modes and question framings yieldsimilar (but not identical) responses for both primary ratings and confidencejudgments. We also find a similar nomological net across conditions, suggestingcross-study comparability. Finally, myside bias and political conservatism werestrongly positively correlated with misinformation susceptibility, whereasnumeracy skills and especially cognitive reflection were less important(although we note potential ceiling effects for numeracy). We thus find moresupport for an “integrative” account than a “classicalreasoning” account of misinformation belief.

The suggestion that the new private law theory would have to stand the test of acceptance by the global legal community raises a question. Who is that “global legal community?” And does it go beyond Europe? Close reading demonstrates that the non-European world is present and hidden at the same time. It is present because much of the material presented, many of the theories discussed, have transnational materials. However, the non-European world is hidden at the same time because it remains unaddressed, marginalized, and ignored. Including the Global South would make necessary a more radical pluralization of private law theory. This opens up the possibility of new, very different idea of a global legal community that is more improbable but also more attractive.

Resilience is a cross-disciplinary concept that is relevant for understanding the sustainability of the social and environmental conditions in which we live. Most research normatively focuses on building or strengthening resilience, despite growing recognition of the importance of breaking the resilience of, and thus transforming, unsustainable social-ecological systems. Undesirable resilience (cf. lock-ins, social-ecological traps), however, is not only less explored in the academic literature, but its understanding is also more fragmented across different disciplines. This disparity can inhibit collaboration among researchers exploring interdependent challenges in sustainability sciences. In this article, we propose that the term lock-in may contribute to a common understanding of undesirable resilience across scientific fields.

Extensive settlement activity at the Bronze Age site of Mokarta in western Sicily has previously been inferred, but the extent and condition of its subsurface remains have never been established. The authors use geophysical prospection, historical and modern remote-sensing data and soil chemistry to identify previously undocumented structures and activity areas extending beyond those exposed by previous excavations. This exercise not only has implications for the multifaceted social organisation of Late Bronze Age communities in Sicily, but, more generally, demonstrates how minimally invasive investigative techniques combined with existing data can reveal subsurface archaeological sites and the impact of post-depositional processes.

We report a novel strategy to render stainless steel (SS) a more versatile material that is suitable to be used as the substrate for preparing electrodes for efficient hydrogen evolution by interface engineering. Our strategy involves the growth of carbon nanotubes (CNTs) by atmospheric pressure chemical vapor deposition (APCVD) as the interface material on the surface of SS. We optimized the procedure to prepare CNTs/SS and demonstrate a higher activity of the CNTs/SS prepared at 700 °C for the hydrogen evolution reaction (HER) when compared to samples prepared at other temperatures. This can be attributed to the higher number of defects and the higher content of pyrrolic N obtained at this temperature. Our strategy offers a new approach to employ SS as a substrate for the preparation of highly efficient electrodes and has the potential to be widely used in electrochemistry.

Perovskite chalcogenides are gaining substantial interest as an emerging class of semiconductors for optoelectronic applications. High-quality samples are of vital importance to examine their inherent physical properties. We report the successful crystal growth of the model system, BaZrS3 and its Ruddlesden–Popper phase Ba3Zr2S7 by a flux method. X-ray diffraction analyses showed the space group of Pnma with lattice constants of a = 7.056(3) Å, b = 9.962(4) Å, and c = 6.996(3) Å for BaZrS3 and P42/mnm with a = 7.071(2) Å, b = 7.071(2) Å, and c = 25.418(5) Å for Ba3Zr2S7. Rocking curves with full width at half maximum of 0.011° for BaZrS3 and 0.027° for Ba3Zr2S7 were observed. Pole figure analysis, scanning transmission electron microscopy images, and electron diffraction patterns also establish the high quality of the grown crystals. The octahedral tilting in the corner-sharing octahedral network is analyzed by extracting the torsion angles.

Graph-based design languages offer a promising approach to address several major issues in engineering, e. g. the laborious manual transfer between CAD and CAE. Such languages generate a digital meta- or system model storing all relevant information about a design and feed this into any relevant CAE tool as needed to simulate and test the impact of any design variation on the resulting product performance. As this can be automated in digital compilers to perform systematic design variation for an almost infinite amount of parameters, such graph-based languages are a powerful means to generate viable design alternatives and thus permit fast evaluations.

To leverage the full potential of graph-based design languages, possibilities are presented to expand their applicability into the domain of product functions. This possibilities allow to cohesively link integrative function modelling to product structures. This intends to close the gap between the early, abstract stages and the systematic, concrete design generation and validation with relevant CAE tools. In this paper, the IFM Framework was selected as integrated function model to be linked with the graph- based design languages.

When France and Belgium banned face veils in 2010 and 2011, they were the first European countries to do so in a comprehensive matter. Now Austria has its own ban, Denmark is on track to have one too, and several other countries are toying with the idea. Such bans are often considered incompatible with the rights of veil wearers (especially Muslim women). Less prominent is the question whether such bans are incompatible with the modern state.

Such a critique can be grounded on the work of the leading German constitutional law scholar Ernst-Wolfgang Böckenförde and his famous dictum, according to which “[t]he liberal, secularized state draws its life from preconditions it cannot itself guarantee.” For Böckenförde, this means that headscarves, a different type of veil, cannot be banned—not because this would violate a woman's rights, but because it would undermine the very character of the state itself.

The article transposes this argument from the German discourse over headscarves to the European discourse over face veils. It demonstrates the potential of Böckenförde's dictum for the face veil debate, but also its limitations.

Philip Jessup would not be pleased. Exactly sixty years after he published his groundbreaking book on Transnational Law, a majority of voters in the United Kingdom decided they wanted none of that. By voting for the UK to leave the European Union, they rejected what may well be called the biggest and most promising project of transnational law. Indeed, the European Union (including its predecessor, the European Economic Community), is nearly as old Jessup's book. Both are products of the same time. That invites speculation that goes beyond the immediate effects of Brexit: Is the time of transnational law over? Or can transnational law be renewed and revived?