Paranosema locustae is an environmentally friendly parasitic predator with promising applications in locust control. In this study, transcriptome sequencing was conducted on gonadal tissues of Locusta migratoria males and females infected and uninfected with P. locustae at different developmental stages. A total of 18,635 differentially expressed genes (DEGs) were identified in female ovary tissue transcriptomes, with the highest number of DEGs observed at 1 day post-eclosion (7141). In male testis tissue transcriptomes, a total of 32,954 DEGs were identified, with the highest number observed at 9 days post-eclosion (11,245). Venn analysis revealed 25 common DEGs among female groups and 205 common DEGs among male groups. Gene ontology and Kyoto Encyclopaedia of Genes and Genome analyses indicated that DEGs were mainly enriched in basic metabolism such as amino acid metabolism, carbohydrate metabolism, lipid metabolism, and immune response processes. Protein–protein interaction analysis results indicated that L. migratoria regulates the expression of immune- and reproductive-related genes to meet the body's demands in different developmental stages after P. locustae infection. Immune- and reproductive-related genes in L. migratoria gonadal tissue were screened based on database annotation information and relevant literature. Genes such as Tsf, Hex1, Apolp-III, Serpin, Defense, Hsp70, Hsp90, JHBP, JHE, JHEH1, JHAMT, and VgR play important roles in the balance between immune response and reproduction in gonadal tissues. For transcriptome validation, Tsf, Hex1, and ApoLp-III were selected and verified by quantitative real-time polymerase chain reaction (qRT-PCR). Correlation analysis revealed that the qRT-PCR expression patterns were consistent with the RNA-Seq results. These findings contribute to further understanding the interaction mechanisms between locusts and P. locustae.

Relativistic few-cycle mid-infrared (mid-IR) pulses are unique tools for strong-field physics and ultrafast science, but are difficult to generate with traditional nonlinear optical methods. Here, we propose a scheme to generate such pulses with high efficiency via plasma-based frequency modulation with a negatively chirped laser pulse (NCLP). The NCLP is rapidly compressed longitudinally due to dispersion and plasma etching, and its central frequency is downshifted via photon deceleration due to the enhanced laser intensity and plasma density modulations. Simulation results show that few-cycle mid-IR pulses with the maximum center wavelength of $7.9\;\unicode{x3bc} \mathrm{m}$ and pulse intensity of ${a}_{\mathrm{MIR}}=2.9$ can be generated under a proper chirp parameter. Further, the maximum energy conversion efficiency can approach 5.0%. Such a relativistic mid-IR source is promising for a wide range of applications.

Pregnancy is a complex biological process. The establishment and maintenance of foetal–maternal interface are pivotal events. Decidual immune cells and inflammatory cytokines play indispensable roles in the foetal–maternal interface. The disfunction of decidual immune cells leads to adverse pregnancy outcome. Tumour necrosis factor (TNF)-α, a common inflammatory cytokine, has critical roles in different stages of normal pregnancy process. However, the relationship between the disorder of TNF-α and adverse pregnancy outcomes, including preeclampsia (PE), intrauterine growth restriction (IUGR), spontaneous abortion (SA), preterm birth and so on, is still indefinite. In this review, we thoroughly reviewed the effect of TNF-α disorder on pathological conditions. Moreover, we summarized the reports about the adverse pregnancy outcomes (PE, IUGR, SA and preterm birth) of using anti-TNF-α drugs (infliximab, etanercept and adalimumab, certolizumab and golimumab) currently in the clinical studies. Overall, IUGR, SA and preterm birth are the most common adverse pregnancy outcomes of anti-TNF-α drugs. Our review may provide insight for the immunological treatment of pregnancy-related complication, and help practitioners make informed decisions based on the current evidences.

For $0<\lambda ,p<1$ , the Dirichlet–Morrey space $\mathcal {D}_p^{\lambda } $ is the space of all analytic function on the unit disc such that the measure $ |f'(z)|^2(1-|z|^2)^pdA(z)$ is a $p\lambda $ -Carleson measure. In this paper, we show that the corona theorem and the Wolff theorem hold for the multiplier algebra of Dirichlet–Morrey spaces.

Reintroductions aim to re-establish a viable population within the indigenous range of living organisms, especially of threatened species. The population of the Asian Crested Ibis Nipponia nippon, a well-known ‘Endangered’ bird species, has increased over 100 times since wild populations were rediscovered in 1981, and several reintroduction projects were subsequently carried out in its former range. An experimental release of the Asian Crested Ibis was conducted in Qianhu National Wetland Park located in the southern part of the Loess Plateau, China. It is vitally important to monitor released birds (at least their survival and breeding), to inform subsequent releases in other suitable sites. During extensive post-release monitoring, data on capture-recapture and reproductive status were obtained using banding, radiotelemetry, and field observations. Using the Cormack-Jolly-Seber (C-J-S) model, the average annual survival rates were estimated to be 0.569 (95% CI: 0.353–0.762) for released individuals and 0.643 (95% CI: 0.038–0.987) for all individuals. From 2014 to 2018, a total of 14 breeding pairs produced 28 eggs and 10 fledglings with successful reproduction of the second generation. The mean clutch size was 2.07 ± 0.25 (n = 29), and the breeding success was 34.5%. Predation and poor habitat quality have been shown to be the main factors affecting the reintroduced population at establishment stage. Some management suggestions at the metapopulation and ecosystem levels, including further release, predator control and habitat improvement, have been proposed.

Iridium (Ir) has an extremely high melting point (2443 °C), high chemical stability and is one of the most promising high-temperature materials. However, Ir is more difficult to process compared with other face-centered cubic metals, such as Ni and Al, which limits its applications. To solve this problem, we study the effect of 32 alloying elements (X) on stacking fault energy of dilute Ir-based alloys generated by shear deformation using the first-principles calculations. The investigation reveals that there are many alloying elements studied herein decrease the stacking fault energy of face-centered cubic (fcc) Ir, and the most effective element in reducing stacking fault energy of fcc Ir is Zn. The microscopic mechanism is caused by electron redistribution in the local stacking fault area. These results are expected to provide valuable guidance for the further design and application of Ir-based alloys.

Experimentally revealing dynamic evolution and growth behavior of small solute clusters in alloys remains a technical challenge. To date, the coalescence of the solute clusters has seldom been experimentally addressed. To address the challenge, we used atom probe tomography (APT) to access boundary information of solute clusters and identify those in close contact. By systematically investigating the population and size evolution of the clusters in close contact with aging time, we unveiled important information regarding the clusters in coalescence with the exsitu experimental technique. In this work, the maximum separation method was employed to identify clusters in APT datasets of naturally aged Al–Zn–Mg alloy. Coalescence was found to significantly contribute to the growth of small clusters and remained predominant for the formation and growth of large Guinier–Preston II ${\rm \lpar G}{\rm P}_{{\eta }^{\prime}}\rpar$ zones after 3 months aging.

Aggressive behaviour is common in animals and typically has lifetime consequences. As younger males have higher residual reproductive value than older males and lose more from injuries than older males do, the propensity for fighting tends to increase with age in many empirical reports and species. However, fighting patterns in those empirical reports cannot confirm the hypothesis that individuals cannot readily inflict injuries on their opponents. To address this shortcoming, a parasitoid wasp species, Anastatus disparis (Hymenoptera: Eupelmidae), was used as an experimental model to explore the characteristics of aggression from a life-history perspective; this wasp exhibits extreme fighting, resulting in contestants experiencing injury and death. Results showed that the energetic costs of fighting to injury significantly shortened life and caused the loss of most mating ability. Inconsistent with general predictions, the frequency and intensity of fighting in A. disparis significantly decreased with male age. Further study results showed significantly more young males were received by and successfully mated with virgin females, and most genes related to energy metabolism were downregulated in aged males. Our study provided supporting evidence that young A. disparis males show more aggression likely because of their resource holding potential and sexual attractiveness decline with age.

Metal-halide perovskite solar cells (PSCs) have become a promising candidate for photovoltaic applications. Current popular organic hole conductors for highly efficient PSCs bring cost and stability issues, which hinder the commercialization of the PSCs. Hole-conductor-free PSCs are attracting great interest because they eliminate the adverse effects of organic hole conductors by transporting holes in the perovskite itself. In this article, we summarize recent progress in conventional, inverted, and printable mesoscopic hole-conductor-free PSCs. Specifically, we emphasize the stunning stability and scale-up manufacturing of printable hole-conductor-free PSCs, discussing their potential from laboratory to market. The causes for hole-conductor-free PSCs’ current low efficiency are also discussed, and are primarily ascribed to energy-level alignment and interface recombination. We believe that the efficiencies of hole-conductor-free PSCs can be enhanced to be comparable with hole-conductor-containing PSCs by interface modification and material design.

We investigate the phased evolution and variation of the South Asian monsoon and resulting weathering intensity and physical erosion in the Himalaya–Karakoram Mountains since late Pliocene time (c. 3.4 Ma) using a comprehensive approach. Neodymium and strontium isotopic compositions and single-grain zircon U–Pb age spectra reveal the sources of the deposits in the east Arabian Sea, and show a combination of sources from the Himalaya and the Karakoram–Kohistan–Ladakh Mountains, with sediments from the Indian Peninsula such as the Deccan Traps or Craton. We interpret shifts in the sediment sources to have been forced by sea-level changes that correlate with South Asian monsoon rainfall variation since late Pliocene time. We collected 908 samples from the International Ocean Discovery Program Hole U1456A, which was drilled in the east Arabian Sea. Time series of hematite content and grain size of the sediments were examined downcore. We found South Asian monsoon precipitation and weathering intensity experienced three phases from late Pliocene time. Lower monsoon precipitation, with a lower variability and strong weathering intensity, occurred during 3.4–2.4 Ma; an increased and more variable South Asian monsoon rainfall, along with strengthened but fluctuating weathering intensity, occurred at 1.8–1.1 Ma; and a reduced rainfall with lower South Asian monsoon precipitation variability and moderate weathering intensity marked the period 1.1–0.1 Ma. Maximum entropy spectral analysis and wavelet transform show that there were orbital-dominated cycles of periods c. 100 and c. 41 ka in these proxy-based time series. We propose that the monsoon, sea level, global temperature and insolation together forced the weathering and erosion in SW Asia.

Information about seed dormancy cycling and germination in relation to temperature and moisture conditions in the natural environment is important for the conservation and restoration of rare species, including Begonia guishanensis and Paraisometrum mileense, two sympatric perennial limestone (karst) species. Dry afterripening (DAR) and wet and dry (WD) cycles at 15/5 and 25/15°C as well as moist chilling (MC) at 15/5°C were used to mimic the natural environment at different times of the year. A field experiment was conducted to monitor seasonal changes in germination responses of the seeds. About 40–65% of B. guishanensis and 5% of P. mileense seeds were dormant at maturity. DAR at 25/15 and 15/5°C as well as MC and WD cycles at 15/5°C alleviated dormancy for B. guishanensis but not P. mileense, and WD cycles at 25/15°C induced a deeper conditional dormancy for both species. Seeds of B. guishanensis exhibited dormancy cycling in the field, with increased dormancy under natural WD cycles at relatively high temperatures during the transition from the dry to the wet season in April to May and decreased dormancy during the wet season from June to October. KNO3 mitigated the dormancy-inducing effect of both artificial and natural WD cycles at relatively high temperatures for B. guishanensis. The field experiment indicated that seeds of B. guishanensis may be able to form a persistent soil seed bank, while almost all seeds of P. mileense germinate at the beginning of the wet season in the field.

Atom probe tomography (APT) has emerged as an important tool in characterizing three-dimensional semiconductor devices. However, the complex structure and hybrid nature of a semiconductor device can pose serious challenges to the accurate measurement of dopants. In particular, local magnification and trajectory aberration observed when analyzing hybrid materials with different evaporation fields can cause severe distortions in reconstructed geometry and uncertainty in local chemistry measurement. To address these challenges, this study systematically investigates the effect of APT sampling directions on the measurement of n-type dopants P and As in an Si fin field-effect transistor (FinFET). We demonstrate that the APT samples made with their Z-axis perpendicular to the center axis of the fin are effective to minimize the negative effects that result from evaporation field differences between the Si fin and SiO2 on reconstruction and achieve improved measurement of dopant distributions. In addition, new insights have been gained regarding the distribution of ion-implanted P and As in the Si FinFET.

Active Galactic Nuclei (AGN) exhibit multi-wavelength properties that are representative of the underlying physical processes taking place in the vicinity of the accreting supermassive black hole. The black hole mass and the accretion rate are fundamental for understanding the growth of black holes, their evolution, and the impact on the host galaxies. Recent results on reverberation-mapped AGNs show that the highest accretion rate objects have systematic shorter time-lags. These super-Eddington accreting massive black holes (SEAMBHs) show BLR size 3-8 times smaller than predicted by the Radius-Luminosity (R-L) relationship. Hence, the single-epoch virial black hole mass estimates of highly accreting AGNs have an overestimation of a factor of 3-8 times. SEAMBHs likely have a slim accretion disk rather than a thin disk that is diagnostic in X-ray. I will present the extreme X-ray properties of a sample of dozen of SEAMBHs. They indeed have a steep hard X-ray photon index, Γ, and demonstrate a steeper power-law slope, ασx.

Power repeaters are used to extend the power transfer range or enhance the power transfer capability of Inductive Power Transfer (IPT) systems, but how to tune the power repeaters to improve the system power transfer performance remains an unsolved problem. In this paper, studies of the effect of the tuning capacitance of the power repeater of an IPT system on the power transfer capability are presented. A theoretical model is established to analyze the output power of the system with the primary coil and secondary coil tuned at a nominal resonant frequency, and a passive power repeater placed in between. By analyzing the relationship between the tuning capacitance of the power repeater and the output power, a critical tuning capacitance which sets up the boundary between enhancing and reducing the output power is determined, and the optimal tuning capacitances corresponding to the maximum and minimum output power are also obtained. A practical IPT system with a passive power repeater placed at 40, 80, and 104 mm from the primary coil is built. It has shown that the practically measured critical capacitance and the optimal tuning capacitance for maximum power transfer are in good agreement with the analytical results.

A linear stability analysis is conducted for the onset of natural convection driven by a concentration gradient in a horizontal layer of a near-critical binary fluid mixture. The problem is regarded as a limiting case of double-diffusive convection. The governing equations for small perturbations after normal-mode expansion are solved numerically with finite difference discretization to obtain the critical concentration Rayleigh number. It is found that, when the height of the fluid layer is small, the initial density stratification is negligible and the theoretical criterion developed under Boussinesq approximation with the modified Rayleigh number is accurate even extremely close to the critical point. However, for a large height, the initial density stratification makes the fluid layer become more unstable, and deviations from theoretical predictions are observed. We further propose a method to estimate these deviations, which can be used to check the applicability of the theoretical criterion. As the second part of the study, we apply the criterion to interpret the onset of convection for a transient problem: a near-critical binary fluid mixture confined in a two-dimensional cavity submitted to concentration increases at the bottom wall. The numerical results demonstrate four typical behaviours of the concentration boundary layer: onset of convection, collapse of the concentration boundary layer, return to stability, and remaining stable. Comparisons between numerical results and the stability criterion are made, where consistencies are found except for the behaviour of return to stability. We attribute the inconsistency to the existence of lateral walls, whose stabilizing effect is strong when the return to stability happens.

An underwater shock loading experimental device is used to simulate underwater explosion shock waves. The aim of this study is to investigate the influence of flyer momentum on the response of an aluminium plate to this underwater shock loading experimental device. The simulation accuracy can be verified by comparing theoretical data with the simulation and experimental results. Through simulations, an aluminium plate’s deformation and pressure specific impulse can be determined when flyers impact the piston at different velocities but at the same momentum. The aluminium plate's deformation and pressure specific impulse are constant when the flyers had constant momentum because both are directly proportional to the flyer momentum. The results have an important practical value for understanding and using this type of experimental device.

Maritime anomaly detection is a key technique in intelligent vessel traffic surveillance systems and implementation of maritime situational awareness. In this paper, we propose a method which combines vessel trajectory clustering and Naïve Bayes classifier to detect anomalous vessel behaviour in the maritime surveillance system. A similarity measurement between vessel trajectories is designed based on the spatial and directional characteristics of Automatic Identification System (AIS) data, then the method of hierarchical and k-medoids clustering are applied to model and learn the typical vessel sailing pattern within harbour waters. The Naïve Bayes classifier of vessel behaviour is built to classify and detect anomalous vessel behaviour. The proposed method has been tested and validated on the vessel trajectories from AIS data within the waters of Xiamen Bay and Chengsanjiao, China. The results indicate that the proposed method is effective and helpful, thus enhancing maritime situational awareness in coastal waters.