Previous studies revealed that consuming spicy food reduced mortality from CVD and lowered stroke risk. However, no studies reported the relationship between spicy food consumption, stroke types and dose–response. This study aimed to further explore the association between the frequency of spicy food intake and the risk of stroke in a large prospective cohort study. In this study, 50 174 participants aged 30–79 years were recruited. Spicy food consumption data were collected via a baseline survey questionnaire. Outcomes were incidence of any stroke, ischaemic stroke (IS) and haemorrhagic stroke (HS). Multivariable-adjusted Cox proportional hazard models estimated the association between the consumption of spicy food and incident stroke. Restricted cubic spline analysis was used to examine the dose–response relationship. During the median 10·7-year follow-up, 3967 strokes were recorded, including 3494 IS and 516 HS. Compared with those who never/rarely consumed spicy food, those who consumed spicy food monthly, 1–2 d/week and 3–5 d/week had hazard ratio (HR) of 0·914 (95 % CI 0·841, 0·995), 0·869 (95 % CI 0·758, 0·995) and 0·826 (95 % CI 0·714, 0·956) for overall stroke, respectively. For IS, the corresponding HR) were 0·909 (95 % CI 0·832, 0·994), 0·831 (95 % CI 0·718, 0·962) and 0·813 (95 % CI 0·696, 0·951), respectively. This protective effect showed a U-shaped dose–response relationship. For obese participants, consuming spicy food ≥ 3 d/week was negatively associated with the risk of IS. We found the consumption of spicy food was negatively associated with the risk of IS and had a U-shaped dose–response relationship with risk of IS. Individuals who consumed spicy food 3–5 d/week had a significantly lowest risk of IS.

Structural and sequential ambidexterity are proved to be two prevalent approaches in managing tension between exploration and exploitation. Dominant studies have treated the two approaches as mutually exclusive but have provided less insight about their combination, and the organizational configurations that advance such combination, which is a major meaningful gap explored in the current study. This study aims to explore the configurations of organization design choices to combine structural and sequential approaches from a holistic perspective. We apply fuzzy-set qualitative comparative analysis (fsQCA) to analyze the empirical data collected from 102 firms in China. The results show that firms attain high ambidexterity with both separated and blended configurations. Blended ones demonstrate that the structural and sequential approaches can be combined in a way that one approach dominates and the other subordinates. Organizational design mechanisms regarding the configurations for combining structural and sequential approaches are concluded as multielements (complements and substitutes) and multilevels (fit and interaction). These findings are also interpreted through the Chinese ‘Yin-Yang’ framework, which introduces ‘Yin-Yang balancing’ into the ambidexterity literature.

Considering the influence of body’s growth and development on thyroid volume (TVOL), whether five existed corrected methods could be applied to correct TVOL remains unclear, in terms of Chinese children’s increased growth and development trends. This study aimed to compare the applicability of five correction methods: Body Surface Area corrected Volume (BSAV), Body Mass Indicator corrected Volume (BMIV), Weight and Height corrected Volume Indicator (WHVI), Height corrected Volume Indicator 1 (HVI1) and Height corrected Volume Indicator 2 (HVI2) and to establish the reference values for correction methods. The data of Iodine Nutrition and Thyroid Function Survey were used to analyse the differences in TVOL between normal and abnormal thyroid function children. Data of National Iodine Deficiency Disorders Survey were used to compare five correction methods and to establish their reference values. The median urinary iodine concentrations of children surveyed were 256·1 μg/l in 2009 and 192·6 μg/l in 2019. No significant difference was found in TVOL and thyroid goitre rate between children with normal and abnormal thyroid function. In the determination of goitre, HVI1, HVI2, BSAV and BMIV all showed high agreement with TVOL, while the area under the receiver operating characteristic curve (AUC) of WHVI was relatively low for children aged 8 (AUC = 0·8993) and 9 (AUC = 0·8866) years. Most differences of TVOL between light and heavy weight, short and tall height children can be eliminated by BSAV. BSAV was the best corrected method in this research. Reference values were established for corrected TVOL in Chinese children aged 8–10 years by sex.

For individual cultures, findings on regulating embryo density by changing the microdrop volume are contradictory. The aim of this study was to investigate the relationship between embryo density and the developmental outcome of day 3 embryos after adjusting covariates. In total, 1196 embryos from 206 couples who had undergone in vitro fertilization treatment were analyzed retrospectively. Three embryo densities were used routinely, i.e. one embryo in a drop (30 μl/embryo), two embryos in a drop (15 μl/embryo) and three embryos in a drop (10 μl/embryo). Embryo quality on day 3 was evaluated, both the cell number of day 3 embryos and the proportion of successful implantations served as endpoints. Maternal age, paternal age, antral follicles and level of anti-Müllerian hormone, type of infertility, controlled ovarian stimulation protocol, length of stimulation, number of retrieved oocytes, number of zygotes (two pronuclei) and insemination type were covariates and adjusted. After adjusting fully for all covariates, the cell number of day 3 embryos was significantly increased by 0.40 (95% CI 0.00, 0.79; P = 0.048) and 0.78 (95% CI 0.02, 1.54; P = 0.044) in the 15 μl/embryo and 10 μl/embryo group separately, compared with the 30 μl/embryo group. The proportions of implanted embryos were 42.1%, 48.7% and 0.0% in the 30 μl/embryo, 15 μl/embryo and 10 μl/embryo groups respectively. There was no statistical significance (P = 0.22) between the 30 μl/embryo group and the 15 μl/embryo group. After adjusting for confounders that were significant in univariate analysis, embryo density was still not associated with day 3 embryo implantation potential (P > 0.05). In a 30-μl microdrop, culturing embryos with an embryo density of both 15 and 10 μl/embryo increased the cell number of day 3 embryos, which did not benefit embryo implanting potential, compared with individual culture of 30 μl/embryo.

The prevalence of malnutrition is high among oncology patients in Northern China. Malnutrition is related to the longer hospital stay, and it can be used to predict the prognostic outcome of patients. This work focused on investigating the relationship of nutritional condition with the length of hospital stay (LOS) in Northern Chinese patients with lung adenocarcinoma (LUAD). The Patient-Generated Subjective Global Assessment (PG-SGA), Nutritional Risk Screening 2002 (NRS 2002) score, recent weight loss and BMI were assessed in a probabilistic sample of 389 LUAD patients without epidermal growth factor receptor (EGFR) mutations. This study collected the demographic and clinical features of patients in a prospective manner. Then, we examined the association of nutritional status with LOS among the population developing LUAD. According to the PG-SGA, 63 (16·3 %), 174 (44·7 %) and 78 (20·1 %) patients were at risk for undernutrition, moderate undernutrition and severe undernutrition, respectively. Nutritional risk was found in 141 (36·2 %) patients based on the NRS 2002. The average LOS for tumour patients in Northern China was 12·5 d. At admission, a risk of undernutrition or undernutrition according to the PG-SGA (P < 0·001), NRS 2002 (P < 0·001) and latest weight loss (P < 0·001) predicted the longer LOS. LOS was related to nutritional status and hospitalisation expenses (P < 0·001). LUAD patients who stayed in the ICU had a poorer nutritional status and a longer LOS (P < 0·001). In Northern Chinese patients with LUAD, a risk for undernutrition evaluated by the PG-SGA, the NRS 2002 and recent weight loss, but not BMI, could predict a longer LOS.

Nutritional Risk Screening index is a standard tool to assess nutritional risk, but epidemiological data are scarce on controlling nutritional status (CONUT) as a prognostic marker in acute haemorrhagic stroke (AHS). We aimed to explore whether the CONUT may predict a 3-month functional outcome in AHS. In total, 349 Chinese patients with incident AHS were consecutively recruited, and their malnutrition risks were determined using a high CONUT score of ≥ 2. The cohort patients were divided into high-CONUT (≥ 2) and low-CONUT (< 2) groups, and primary outcomes were a poor functional prognosis defined as the modified Rankin Scale (mRS) score of ≥ 3 at post-discharge for 3 months. Odds ratios (OR) with 95 % confidence intervals (CI) for the poor functional prognosis at post-discharge were estimated by using a logistic analysis with additional adjustments for unbalanced variables between the high-CONUT and low-CONUT groups. A total of 328 patients (60·38 ± 12·83 years; 66·77 % male) completed the mRS assessment at post-discharge for 3 months, with 172 patients at malnutrition risk at admission and 104 patients with a poor prognosis. The levels of total cholesterol and total lymphocyte counts were significantly lower in high-CONUT patients than low-CONUT patients (P = 0·012 and < 0·001, respectively). At 3-month post discharge, there was a greater risk for the poor outcome in the high-CONUT compared with the low-CONUT patients at admission (OR: 2·32, 95 % CI: 1·28, 4·17). High-CONUT scores independently predict a 3-month poor prognosis in AHS, which helps to identify those who need additional nutritional managements.

Cotton fibre yield and quality are markedly influenced by drought and high-temperature stress. We examined the traits of the leaf stomata in 39 cotton genotypes subjected to exogenous phytohormone abscisic acid (ABA) signalling, electrolyte leakage under 40°C thermal stress, and relative GhHsfA, GhbZIP and GhHSP70 expression levels under two treatments. Stomatal density and area ranged from 66 to 182/mm2 and 663 to 1305 μm2, respectively. Under exogenous ABA signalling, the changes in stomatal aperture (ΔSAp) were in the range of 2.5–31.2%; ΔSAp and relative GhHsfA, GhbZIP and GhHSP70 expression levels were significantly correlated, respectively. Electrolyte leakage increased unequally among cotton genotypes after heat stress. The changes in electrolyte leakage (ΔEL) and relative GhHsfA, GhbZIP and GhHSP70 expression levels were very strongly correlated, respectively. Their relative expression levels could be used as references for the rapid identification of stress-tolerant cotton strains. Cluster analysis of the 39 cotton genotypes indicated that Xinluzao36, Shiyang1, shinong98-7 and Zhongmiansuo293 are heat- and drought-resistant. We integrated both analysis of physiological parameters and molecular methods to identify cotton varieties with the drought and heat tolerance, in order to provide a reference for the selection of materials and methods for the research and production of cotton.

We present the experimental optimization of electrons in the several hundred keV energy range originated from laser-irradiated wire targets. Accelerated by a femtosecond laser pulse, an electron pulse emitted from the wire target was collimated immediately along the wire to a filter unit for the manipulation of energy and spatial distributions. It is shown in simulation that with a pair of magnets as the filter unit, the optimized electrons could serve as a compact and tunable electron source. The proposed system was demonstrated in a proof-of-principle experiment where we attained 1 fC bunch charge with transverse coherence length approaching 1 nm based on a 0.2 TW laser platform. This indicates the scheme as a promising candidate for single-shot electron diffraction.

Considering the nonlocal small-scale effect and surface effect, we perform the size-dependent vibration analysis of carbon nanotube (CNT). The modified governing equations for CNT’s vibration behaviors are derived by using the nonlocal Euler–Bernoulli and Timoshenko beam models, together with the consideration of surface tension and surface elasticity. According to the numerical experiments, both small-scale effect and surface effect make a substantial difference. For flexural vibration, size effect for CNT’s vibration behaviors weakens with the increase of its diameter, but strengthens with the increase of the length–diameter ratio; for shear vibration with constant length–diameter ratio, a nonlinear correlation between size effect and CNT’s diameter exists, suggesting that there is a typical diameter for CNTs, which corresponds to the “strongest” size effect. In addition, the effects of elastic substrate modulus, temperature change, and axial preloading on the vibration behaviors and their size-dependence are analyzed, respectively.

The analysis of punctuation in philology is mainly carried out with a view to better understand the meaning of the literature concerned. Punctuation is generally believed to play the role of ‘assisting the written language in indicating those elements of speech that cannot be conveniently set down on paper: chiefly the pause, pitch and stress in speech’ (Markwardt, 1942: 156). Most of us often ignore the importance of punctuation in writing systems and tend to believe that punctuation only depends on tradition and the personal styles of writers. In fact, punctuation marks may contribute significantly to the clarity of expression. Many linguists associate punctuation with intonation, but the truth is more complex than that – punctuation marks may affect orthography, morphology, syntactic relations, semantic information, and can even influence textual structure.

Breast milk (BM) hormones have been hypothesised as a nutritional link between maternal and infant metabolic health. This study aimed to evaluate hormone concentrations in BM of women with and without gestational diabetes mellitus (GDM), and the relationship between maternal factors, BM hormones and infant growth. We studied ninety-six nulliparous women with (n 48) and without GDM and their exclusively breastfed term singletons. Women with GDM received dietary therapy or insulin injection for euglycaemia during pregnancy. Hormone concentrations in BM, maternal BMI and infant growth were longitudinally evaluated on postnatal days 3, 42 and 90. Mothers with GDM had decreased concentrations of adiponectin (Pcolostrum<0·001; Pmature-milk=0·009) and ghrelin (Pcolostrum=0·011; Pmature-milk<0·001) and increased concentration of insulin in BM (Pcolostrum=0·047; Pmature-milk=0·021). Maternal BMI was positively associated with adiponectin (β=0·06; 95 % CI 0·02, 0·1; P=0·001), leptin (β=0·16; 95 % CI 0·12, 0·2; P<0·001) and insulin concentrations (β=0·06; 95 % CI 0·02, 0·1; P<0·001), and inversely associated with ghrelin concentration in BM (β=–0·08; 95 % CI –0·1, –0·06; P<0·001). Among the four hormones, adiponectin was inversely associated with infant growth in both the GDM (βweight-for-height=–2·49; 95 % CI –3·83, –1·15; P<0·001; βhead-circumference=–0·39; 95 % CI –0·65, –0·13; P=0·003) and healthy groups (βweight-for-height=–1·42; 95 % CI –2·38, –0·46; P=0·003; βhead-circumference=–0·15; 95 % CI –0·27, –0·03; P=0·007). Maternal BMI and GDM are important determinants of BM hormone concentrations. Milk-borne adiponectin is determined by maternal metabolic status and plays an independent down-regulating role in early infant growth.

In high power laser facility for inertial confinement fusion research, final optics assembly (FOA) plays a critical role in the frequency conversion, beam focusing, color separation, beam sampling and debris shielding. The design and performance of FOA in SG-II Upgrade laser facility are mainly introduced here. Due to the limited space and short focal length, a coaxial aspheric wedged focus lens is designed and applied in the FOA configuration. Then the ghost image analysis, the focus characteristic analysis, the B integral control design and the optomechanical design are carried out in the FOA design phase. In order to ensure the FOA performance, two key technologies are developed including measurement and adjustment technique of the wedged focus lens and the stray light management technique based on ground glass. Experimental results show that the design specifications including laser fluence, frequency conversion efficiency and perforation efficiency of the focus spot have been achieved, which meet the requirements of physical experiments well.

The Shen-Guang II Upgrade (SG-II-U) laser facility consists of eight high-power nanosecond laser beams and one short-pulse picosecond petawatt laser. It is designed for the study of inertial confinement fusion (ICF), especially for conducting fast ignition (FI) research in China and other basic science experiments. To perform FI successfully with hohlraum targets containing a golden cone, the long-pulse beam and cylindrical hohlraum as well as the short-pulse beam and cone target alignment must satisfy tight specifications (30 and $20~\unicode[STIX]{x03BC}\text{m}$ rms for each case). To explore new ICF ignition targets with six laser entrance holes (LEHs), a rotation sensor was adapted to meet the requirements of a three-dimensional target and correct beam alignment. In this paper, the strategy for aligning the nanosecond beam based on target alignment sensor (TAS) is introduced and improved to meet requirements of the picosecond lasers and the new six LEHs hohlraum targets in the SG-II-U facility. The expected performance of the alignment system is presented, and the alignment error is also discussed.

A 336-cm-long sediment core spanning the last 130 ka was recovered from Lake Xingkai on the northeastern margin of the East Asian summer monsoon domain to reveal the linkage between lacustrine depositional processes and environmental changes. Bayesian end member modeling analysis was conducted to partition and interpret the grain-size distributions of Lake Xingkai sediments. Our results suggest that the sedimentary system is characterized by three end members (EMs). EM1 and EM2, with a modal value of 13 and 10 μm, respectively, indicate the variation of local hydraulic conditions. EM3, with a modal value of 5 μm, reflects the background atmospheric dust loading. High atmospheric dust concentration generally occurred during Marine Isotope Stage (MIS) 5d, MIS 4, and early MIS 3, when the climate in the Asian dust source region was cold and dry. In contrast, low dust concentration prevailed during MIS 2, likely due to the southward shift of the westerlies driven by maximum ice volume in the high latitudes.

We report a novel approach to the instantaneous photoinitiated synthesis of mixed anatase-rutile nanocrystalline TiO2 thin films with a three-dimensional nanostructure through pulsed white light irradiation of photosensitive Ti-organic precursor films. Pulsed photoinitiated pyrolysis accompanied by instantaneous self-assembly and crystallization occurred to form graphitic oxides-coated TiO2 nanograins. Subsequent pulsed light irradiation working as in situ pulsed photothermal treatment improved the crystalline quality of TiO2 film despite its low attenuation of light. The non-radiative recombination of photogenerated electrons and holes in TiO2 nanograins, coupled with inefficient heat dissipation due to low thermal conductivity, produces enough heat to provide the thermodynamic driving force for improving the crystalline quality. The graphitic oxides were reduced by pulsed photothermal treatment and can be completely removed by oxygen plasma cleaning. This photoinitiated nanofabrication technology opens a promising way for the low-cost and high-throughput manufacturing of nanostructured metal oxides as well as TiO2 nanocrystalline thin films.