We investigate the effect of external oscillatory forcing on evolving two-dimensional (2-D) gravity currents, resulting from the well-known lock-exchange set-up, by superimposing a horizontally uniform oscillating pressure gradient. This pressure gradient generates a 2-D horizontally uniform laminar oscillating flow over the flat no-slip bottom that interacts with the evolving gravity current. We explore the effect of the velocity amplitude of the applied oscillating flow and its period of oscillations on the behaviour of the evolving gravity currents. A key element introduced by the external forcing is the Stokes boundary layer near the no-slip bottom wall generating differential advection near the bottom wall when the propagation direction of the gravity current and the oscillating externally imposed flow are in the same direction. This results in a phenomenon that we refer to as lifting of the gravity current, which clearly distinguishes the oscillatory forced gravity current from the freely evolving case. This phenomenon induces fine-scale density structures when the externally imposed flow is opposite to the propagation direction of the gravity current a semi-period later. We have explored the effect of lifting on the current propagation and the density structure of the gravity current front. Three separate regimes are distinguished for the evolution of the density structure in the front of the gravity current depending on the period of forcing, including a regime reminiscent of tidally forced estuarine flows. The present study shows the existence of significant effects of an oscillatory forcing on the dynamics, advection and density distribution of gravity currents.

This paper presents a numerical study on the flow around two tandem circular cylinders beneath a free surface at a Reynolds number of $180$. The free-surface effects on the wake dynamics and hydrodynamic forces are investigated through a parametric study, covering a parameter space of gap ratios from $0.20$ to $2.00$, spacing ratios from $1.50$ to $4.00$ and Froude numbers from $0.2$ to $0.8$. A jet-like flow accompanied by a shear layer of positive vorticity separating from the free surface is formed in the wake at small gap ratios, which significantly alters the wake pattern through its dynamic behaviours. At shallow submergence depths, the three-dimensional wake transitions from mode B to mode A as the distance between the cylinders increases. As submergence depth increases, the wavy deformation of the primary vortex cores disappears in the wake, and the flow transitions to a two-dimensional state. Higher Froude numbers can extend the effect of the free surface to deeper submergence depths. The critical spacing ratio tends to be larger at higher Froude numbers. Furthermore, the free-surface deformation is examined. The free-surface profile typically comprises a hydraulic jump immediately ahead of the upstream cylinder, trapped waves in the vicinity of the two tandem cylinders and well-defined travelling waves on the downstream side. The frequencies of the waves cluster around the vortex shedding frequency, indicating a close association between the generation of waves and the vortex shedding process.

This study investigated the impact of diallyl disulfide (DADS) on oxidative stress induced by hydrogen peroxide (H2O2) in ovine rumen epithelial cells (RECs). Initially, the effects of DADS were evaluated on cellular reactive oxygen species (ROS) levels, antioxidant capacity in RECs were estimated. Then, RNA-seq analysis was conducted in DADS-treated and untreated cells to analyze the differential gene expression, as well as Gene Ontology (GO) and Kyoto Encyclopedia of Genes and Genomes (KEGG) pathways. Finally, the effects of DADS on Kelch-like ECH associated protein 1/the nuclear factor erythroid 2-related factor 2 (Keap1/Nrf2) signaling pathway in RECs were evaluated. Results showed that DADS remarkably enhanced superoxide dismutase (SOD) activity and total antioxidant capacity (T-AOC) (P < 0.05) while reducing ROS and malonaldehyde production (P < 0.05) in H2O2-treated RECs. Transcriptomic analysis revealed that DADS might influence glutathione synthesis through cysteine and methionine metabolism, thereby affecting the transcription of genes involved in immunity and oxidative stress. The DADS treatment resulted in increased nuclear translocation of Nrf2 and upregulation of mRNA and protein levels of quinone oxidoreductase 1, heme oxygenase 1, and Nrf2. The Nrf2-specific inhibitor nullified the protective effects of DADS on malonaldehyde formation induced by H2O2 and decreased T-AOC and SOD activities. In conclusion, DADS demonstrated the ability to alleviate oxidative stress in RECs by promoting antioxidative capacity through the Keap1/Nrf2 signaling pathway.

The assessment of seed quality and physiological potential is essential in seed production and crop breeding. In the process of rapid detection of seed viability using tetrazolium (TZ) staining, it is necessary to spend a lot of labour and material resources to explore the pretreatment and staining methods of hard and solid seeds with physical barriers. This study explores the TZ staining methods of six hard seeds (Tilia miqueliana, Tilia henryana, Sassafras tzumu, Prunus subhirtella, Prunus sibirica, and Juglans mandshurica) and summarizes the TZ staining conditions required for hard seeds by combining the difference in fat content between seeds and the kinship between species, thus providing a rapid viability test method for the protection of germplasm resources of endangered plants and the optimization of seed bank construction. The TZ staining of six species of hard seeds requires a staining temperature above 35 °C and a TZ solution concentration higher than 1%. Endospermic seeds require shorter staining times than exalbuminous seeds. The higher the fat content of the seeds, the lower the required incubation temperature and TZ concentration for staining, and the longer the staining time. And the closer the relationship between the two species, the more similar their staining conditions become. The TZ staining method of similar species can be predicted according to the genetic distance between the phylogenetic trees, and the viability of new species can be detected quickly.

The random distributed-feedback fiber laser (RFL) is a new approach to obtain a high-power stable supercontinuum (SC) source. To consider both structure simplification and high-power SC output, an innovative structure achieving a kilowatt-level SC output in a single-stage RFL with a half-open cavity is demonstrated in this paper. It consists of a fiber oscillator, a piece of long passive fiber and a broadband coupler, among which the broadband coupler acting as a feedback device is crucial in SC generation. When the system has no feedback, the backward output power is up to 298 W under the pump power of 1185 W. When the feedback is introduced before the pump laser, the backward power loss can be reduced and the pump can be fully utilized, which could promote forward output power and conversion efficiency significantly. Under the maximum pump power of 1847 W, a 1300 W SC with spectrum ranging from 887 to 1920 nm and SC conversion efficiency of 66% is obtained. To the best of our knowledge, it is the simplest structure used for high-power SC generation, and both the generated SC output power and the conversion efficiency are highest in the scheme of the half-opened RFL output SC.

Cohesive particulate flows play an important role in environmental fluid dynamics, as well as in a wide variety of civil and process engineering applications. However, the scaling laws, constitutive equations and continuum field descriptions governing such flows are currently less well understood than for their non-cohesive counterparts. Grain-resolved simulations represent an essential tool for addressing this shortcoming, along with theoretical investigations, laboratory experiments and field studies. Here we provide a tutorial introduction to simulations of fine-grained sediments in viscous fluids, along with an overview of some representative insights that this approach has yielded to date. After a brief review of the key physical concepts governing van der Waals forces as the main cohesive effect for subaqueous sediment suspensions, we discuss their incorporation into particle-resolved simulations based on the immersed boundary method. We subsequently describe simulations of cohesive particles in several model turbulent flows, which demonstrate the emergence of a statistical equilibrium between the growth and break-up of aggregates. As a next step, we review the influence of cohesive forces on the settling behaviour of dense suspensions, before moving on to submerged granular collapses. Throughout the article, we highlight open research questions in the field of cohesive particulate flows whose investigation may benefit from grain-resolved simulations.

We present the third data release from the Parkes Pulsar Timing Array (PPTA) project. The release contains observations of 32 pulsars obtained using the 64-m Parkes ‘Murriyang’ radio telescope. The data span is up to 18 yr with a typical cadence of 3 weeks. This data release is formed by combining an updated version of our second data release with $\sim$3 yr of more recent data primarily obtained using an ultra-wide-bandwidth receiver system that operates between 704 and 4032 MHz. We provide calibrated pulse profiles, flux density dynamic spectra, pulse times of arrival, and initial pulsar timing models. We describe methods for processing such wide-bandwidth observations and compare this data release with our previous release.

We conduct three-dimensional direct numerical simulations to investigate the mixing, entrainment and energy budgets of gravity currents emerging from two-layer stratified locks. Depending on the density and layer thickness ratios, we find that either the upper layer or lower layer fluid can propagate faster, and that the density structure of the overall gravity current can range from strongly stratified to near-complete mixing. We furthermore observe that intermediate values of the density ratio can maximise mixing between the gravity current layers. Based on the vorticity budget, we propose a theoretical model for predicting the overall gravity current height, along with the front velocity of the two layers, for situations in which the lower layer moves faster than the upper layer. The model identifies the role of the height and thickness ratios in determining the velocity structure of the current, and it clarifies the dynamics of the ambient counter-current. A detailed analysis of the energy budget quantifies the conversion of potential into kinetic energy as a function of the governing parameters, along with the energy transfer between the different layers of the gravity current and the ambient fluid. Depending on the values of the density and layer thickness ratios, we find that the lower lock layer can gain or lose energy, whereas the upper layer always loses energy.

We investigate the submerged collapse of weakly polydisperse, loosely packed cohesive granular columns, as a function of aspect ratio and cohesive force strength, via grain-resolving direct numerical simulations. The cohesive forces act to prevent the detachment of individual particles from the main body of the collapsing column, reduce its front velocity, and yield a shorter and thicker final deposit. All of these effects can be captured accurately across a broad range of parameters by piecewise power-law relationships. The cohesive forces reduce significantly the amount of available potential energy released by the particles. For shallow columns, the particle and fluid kinetic energy decreases for stronger cohesion. For tall columns, on the other hand, moderate cohesive forces increase the maximum particle kinetic energy, since they accelerate the initial free-fall of the upper column section. Only for larger cohesive forces does the peak kinetic energy of the particles decrease. Computational particle tracking indicates that the cohesive forces reduce the mixing of particles within the collapsing column, and it identifies the regions of origin of those particles that travel the farthest. The simulations demonstrate that cohesion promotes aggregation and the formation of aggregates. Furthermore, they provide complete information on the temporally and spatially evolving network of cohesive and direct contact force bonds. While the normal contact forces are aligned primarily in the vertical direction, the cohesive bonds adjust their preferred spatial orientation throughout the collapse. They result in a net macroscopic stress that counteracts deformation and slows the spreading of the advancing particle front.

The choice of a copula model from limited data is a hard but important task. Motivated by the visual patterns that different copula models produce in smoothed density heatmaps, we consider copula model selection as an image recognition problem. We extract image features from heatmaps using the pre-trained AlexNet and present workflows for model selection that combine image features with statistical information. We employ dimension reduction via Principal Component and Linear Discriminant Analyses and use a Support Vector Machine classifier. Simulation studies show that the use of image data improves the accuracy of the copula model selection task, particularly in scenarios where sample sizes and correlations are low. This finding indicates that transfer learning can support statistical procedures of model selection. We demonstrate application of the proposed approach to the joint modelling of weekly returns of the MSCI and RISX indices.

The article aims to estimate and forecast the transmissibility of shigellosis and explore the association of meteorological factors with shigellosis. The mathematical model named Susceptible–Exposed–Symptomatic/Asymptomatic–Recovered–Water/Food (SEIARW) was used to explore the feature of shigellosis transmission based on the data of Wuhan City, China, from 2005 to 2017. The study applied effective reproduction number (Reff) to estimate the transmissibility. Daily meteorological data from 2008 to 2017 were used to determine Spearman's correlation with reported new cases and Reff. The SEIARW model fit the data well (χ2 = 0.00046, p > 0.999). The simulation results showed that the reservoir-to-person transmission of the shigellosis route has been interrupted. The Reff would be reduced to a transmission threshold of 1.00 (95% confidence interval (CI) 0.82–1.19) in 2035. Reducing the infectious period to 11.25 days would also decrease the value of Reff to 0.99. There was a significant correlation between new cases of shigellosis and atmospheric pressure, temperature, wind speed and sun hours per day. The correlation coefficients, although statistically significant, were very low (<0.3). In Wuhan, China, the main transmission pattern of shigellosis is person-to-person. Meteorological factors, especially daily atmospheric pressure and temperature, may influence the epidemic of shigellosis.

We investigate the removal of a dense bottom layer by a gravity current, via Navier–Stokes simulations in the Boussinesq limit. The problem is governed by a dimensionless thickness parameter for the bottom layer, and by the ratio of the density differences between bottom layer, gravity current and ambient fluids. A quasisteady gravity current forms that propagates along the interface and displaces some of the dense bottom fluid, which accumulates ahead of the gravity current and forms an undular bore or a series of internal gravity waves. Depending on the ratio of the gravity current front velocity to the linear shallow-water wave velocity, we observe the existence of different regimes, characterized by small-amplitude waves or by a train of steep, nonlinear internal waves. We develop a semiempirical model that provides reasonable estimates of several important flow properties. We also formulate a more sophisticated, self-contained model based on the conservation principles for mass and vorticity that does not require empirical closure assumptions. This model is able to predict such quantities as the gravity current height and the internal wave or bore velocity as a function of the governing dimensionless parameters, generally to within approximately a 10 $\%$ accuracy. An energy budget analysis provides information on the rates at which potential energy is converted into kinetic energy and then dissipated, and on the processes by which energy is transferred from the gravity current fluid to the dense and ambient fluids. We observe that the energy content of thicker and denser bottom layers grows more rapidly.

Nicotine 3,5-dihydroxybenzoate dihydrate is a nicotine salt and can be used as compositions in tobacco products. X-ray powder diffraction data, unit-cell parameters, and space group for nicotine 3,5-dihydroxybenzoate, C10H15N2⋅C7H5O4⋅2H2O, are reported [a = 8.424(1) Å, b = 13.179(8) Å, c = 8.591(1) Å, α = 90°, β = 102.073(8)°, γ = 90°, unit-cell volume V = 932.765(3) Å3, Z = 2, ρcal = 1.256 g⋅cm−3, and space group P21] at room temperature. All measured lines were indexed and are consistent with the P21 space group.

This study aimed at estimating the transmissibility of hepatitis C. The data for hepatitis C cases were collected in six districts in Xiamen City, China from 2004 to 2018. A population-mixed susceptible-infectious-chronic-recovered (SICR) model was used to fit the data and the parameters of the model were calculated. The basic reproduction number (R0) and the number of newly transmitted cases by a primary case per month (MNI) were adopted to quantitatively assess the transmissibility of hepatitis C virus (HCV). Eleven curve estimation models were employed to predict the trends of R0 and MNI in the city. The SICR model fits the reported HCV data well (P < 0.01). The median R0 of each district in Xiamen is 0.4059. R0 follows the cubic model curve, the compound curve and the power function curve. The median MNI of each district in Xiamen is 0.0020. MNI follows the cubic model curve, the compound curve and the power function curve. The transmissibility of HCV follows a decreasing trend, which reveals that under the current policy for prevention and control, there would be a high feasibility to eliminate the transmission of HCV in the city.

It has become of key interest in the insurance industry to understand and extract information from telematics car driving data. Telematics car driving data of individual car drivers can be summarised in so-called speed–acceleration heatmaps. The aim of this study is to cluster such speed–acceleration heatmaps to different categories by analysing similarities and differences in these heatmaps. Making use of local smoothness properties, we propose to process these heatmaps as RGB images. Clustering can then be achieved by involving supervised information via a transfer learning approach using the pre-trained AlexNet to extract discriminative features. The K-means algorithm is then applied on these extracted discriminative features for clustering. The experiment results in an improvement of heatmap clustering compared to classical approaches.

Recently, the asymptotic mean value of the height for a birth-and-death process is given in Videla [Videla, L.A. (2020)]. We consider the asymptotic variance of the height in the case when the number of states tends to infinity. Further, we prove that the heights exhibit a cutoff phenomenon and that the normalized height converges to a degenerate distribution.

Previous studies have shown conflicting findings regarding the relationship between maternal vitamin D deficiency (VDD) and fetal growth restriction (FGR). We hypothesised that parathyroid hormone (PTH) may be an underlying factor relevant to this potential association. In a prospective birth cohort study, descriptive statistics were evaluated for the demographic characteristics of 3407 pregnancies in the second trimester from three antenatal clinics in Hefei, China. The association of the combined status of vitamin D and PTH with birth weight and the risk of small for gestational age (SGA) was assessed by a multivariate linear and binary logistic regression. We found that declined status of 25-hydroxyvitamin D is associated with lower birth weight (for moderate VDD: adjusted β = −49·4 g, 95 % CI −91·1, −7·8, P < 0·05; for severe VDD: adjusted β = −79·8 g, 95 % CI −127·2, −32·5, P < 0·01), as well as ascended levels of PTH (for elevated PTH: adjusted β = −44·5 g, 95 % CI −82·6, −6·4, P < 0·05). Compared with the non-VDD group with non-elevated PTH, pregnancies with severe VDD and elevated PTH had the lowest neonatal birth weight (adjusted β = −124·7 g, 95 % CI −194·6, −54·8, P < 0·001) and the highest risk of SGA (adjusted risk ratio (RR) = 3·36, 95 % CI 1·41, 8·03, P < 0·01). Notably, the highest risk of less Ca supplementation was founded in severe VDD group with elevated PTH (adjusted RR = 4·67, 95 % CI 2·78, 7·85, P < 0·001). In conclusion, elevated PTH induced by less Ca supplementation would further aggravate the risk of FGR in pregnancies with severe VDD through impaired maternal Ca metabolism homoeostasis.