Tonic immobility is considered an anti-predator defence, wherein prey adopts a motionless state in a characteristic posture elicited by external stimuli. The marine isopod Cleantiella isopus exhibits tonic immobility with an arch-like posture and motionless state lasting several seconds or minutes in response to external stimuli such as predatory attacks by fish. In this study, we describe tonic immobility by wild-caught C. isopus and examine the influence of body size, sex, and colour morph on the frequency and duration of tonic immobility. All individuals exhibited tonic immobility regardless of body size, sex, or colour morph, suggesting that the behaviour plays a major role in predator avoidance following detection by a predator. In males, smaller individuals exhibited more prolonged tonic immobility than larger individuals, whereas the relationship between the duration of tonic immobility and body size was unclear in females. Colour morph had no effect on the duration of tonic immobility. These findings provide a detailed documentation of tonic immobility in C. isopus and suggest that the factors affecting tonic immobility differ between males and females.

We developed a novel laser melting sampler (LMS) for ice cores to measure the stable water isotope ratios (δ18O and δD) as temperature proxies at sub-centimeter depth resolutions. In this LMS system, a 2 mm diameter movable evacuation nozzle holds an optical fiber through which a laser beam irradiates the ice core. The movable nozzle intrudes into the ice core, the laser radiation meanwhile melts the ice cylindrically, and the meltwater is pumped away simultaneously through the same nozzle and transferred to a vial for analysis. To avoid isotopic fractionation of the ice through vaporization, the laser power is adjusted to ensure that the temperature of the meltwater is always kept well below its boiling point. A segment of a Dome Fuji shallow ice core (Antarctica), using the LMS, was then demonstrated to have been discretely sampled with a depth resolution as small as 3 mm: subsequent analysis of δ18O, δD, and deuterium excess (d) was consistent with results obtained by hand segmentation within measurement uncertainties. With system software to control sampling resolution, the LMS will enable us to identify temperature variations that may be detectable only at sub-centimeter resolutions in ice cores.

The electrochemical catalytic effects of the NiO islands and layer on n-type GaN were investigated. The NiO islands covered some parts of the GaN surface and were seen to improve photoanodic current and prevent photoanodic corrosion. However, the NiO layer was found to worsen the photoanodic current. Hole transportation is thought to occur from the GaN valence band edge to the NiO valence band edge in their surface plane direction due to the band alignment. In addition, the electron capture for water oxidation is expected to be the valence band edge of the NiO instead of the intermediate state.

New strategies for materials fabrication are of fundamental importance in the advancement of science and technology. Nanocrystals, especially with an anisotropic shape such as cubic, are candidates for building blocks for new bottom-up approaches to materials assembly, yielding a functional architecture. Such materials also receive attention because of their intrinsic size-dependent properties and resulting applications. Here, we report synthesis and characteristics of BaTiO3 and SrTiO3 nanocubes and the ordered assemblies as ferroelectric supracrystals. BaTiO3 and SrTiO3 nanocubes with narrow size distributions were obtained in an aqueous process. BaTiO3 films made up of ordered nanocube assemblies were fabricated on various substrates by evaporation-induced self-assembly method. Regardless of the substrate, the nanocubes exhibited {100} orientations and a high degree of face-to-face ordering, which remained even after heat treatment at 850 °C. Piezoresponse force microscopy was carried out on the supracrsytal films to obtain plots of the d33 piezoelectric coefficient against the poling field, and ferroelectric hysteresis curves were shown.

The preference for two shell species, Monodonta labio form confusa and Thais clavigera, was compared between two populations of the hermit crab Pagurus filholi from Oura Bay, Shimoda, central Japan and from Hakodate Bay, Hakodate, northern Japan. Hermit crabs from Oura Bay preferred T. clavigera to M. labio form confusa, whereas crabs from Hakodate Bay preferred M. labio form confusa. The shell of T. clavigera was more effective against desiccation and high temperature stress but heavier than M. labio form confusa. The preference of P. filholi from Oura Bay for T. clavigera may be attributable to the greater requirement for protection against higher physical stresses, even though a higher energetic cost related to the shell weight is incurred.

We have theoretically evaluated the phase stability and electronic structure of Cu2ZnSnSe4 (CZTSe) and Cu2ZnSnS4 (CZTS). The enthalpies of formation for kesterite, stannite and wurtz-stannite phases of CZTSe and CZTS were calculated using a plane-wave pseudopotential method within the density functional formalism. For CZTSe, the calculated formation enthalpy (ΔH) of the kesterite phase (−312.7 kJ/mol) is a little smaller than that of the stannite phase (−311.3 kJ/mol) and much smaller than that of the wurtz-stannite phase (−305.7 kJ/mol). For CZTS, the ΔH of the kesterite phase (−361.9 kJ/mol) is smaller than that of the stannite phase (−359.9 kJ/mol) and much smaller than that of the wurtz-stannite phase (−354.6 kJ/mol). The difference of ΔH between the kesterite and stannite phases for CZTS is greater than that for CZTSe. This indicates the kesterite phase is more stable than the stannite phase in CZTS compared with CZTSe. The valence band maximums (VBMs) of both the kesterite- and stannite-type CZTSe(CZTS) are antibonding orbitals of Cu 3d and Se 4p (S 3p). The conduction band minimums (CBMs) are antibonding orbitals of Sn 5s and Se 4p (S 3p). The Zn atom does not affect the VBM or the CBM in either CZTSe(CZTS). The theoretical band gap of the kesterite phase calculated with sX-LDA in both CZTSe and CZTS is a little wider than that of the wurtz-stannite phase and much wider than that of the stannite phase.

The distribution, reproductive biology and shell utilization pattern of two sympatric hermit crab species in Akkeshi, north-eastern Hokkaido, were examined. Although spatial distributions of Pagurus middendorffii and P. brachiomastus highly overlapped and their body sizes were similar, their shell utilization and breeding season markedly differed. Since interspecific differences in the shell utilization pattern agreed with the experimentally determined shell preference difference, we conclude that the interspecific difference in shell preference results in the shell utilization patterns observed in the field. The interspecific difference in the reproductive period, shell utilization pattern and shell preference are concluded to be factors that allow the coexistence of the two Pagurus species in Akkeshi. This study is an example of resource partitioning by coexisting hermit crabs.

The response of the shore crab Gaetice depressus to predation risk stimuli of either the octopus Octopus vulgaris or crushed conspecifics was examined at two different time phases in the activity rhythm (active and inactive period) by laboratory experiments. When octopus chemical stimuli were introduced to the experimental aquarium, the crab activity decreased in the active period (night) but not in the inactive period (daytime). When the chemical stimuli of crushed G. depressus were introduced, the activity of the crabs increased in the inactive period although the stimuli decreased the activity in the active period. This indicates that G. depressus adjust their anti-predator response according to a combination of the type of predation risk and also the activity rhythm.

Direct observations for high frequency microscopic dielectric distributions in cross sections of a multi-layer ceramic capacitor were carried out using non-contact type microwave probe. The measured data were imaged from the raw data and rounding data process. Using microwave reflection intensity mappings from cross sections of multi-layer ceramic capacitor, the dielectric permittivity distribution in micro-region of a multi-layer ceramic capacitor was measured at room temperature. The spatial resolution was experimentally estimated to be about 10 μm from mappings of the dielectric and inner electrode layers in a multi-layer ceramic capacitor.

Reproductive phenology among temperate hermit crabs, reproductive seasons of nine sympatric species and some reproductive characteristics of four Pagurus species were investigated in Tosa Bay, southern Shikoku, Japan. Females of P. filholi, P. maculosus, P. minutus and P. nigrivittatus had clutches mainly in winter and were found to breed multiple clutches within each reproductive season while four Diogenidae species and P. japonicus mainly reproduced in summer, suggesting that interspecific variation in reproductive phenology of temperate hermit crabs might be determined by allopatric adaptation with phylogenic constraints. There was interspecific variation in the length of reproductive seasons among the four Pagurus species and the variation was considered to reflect the interspecific difference in the number of clutches per reproductive season, not in the ovigerous period per clutch. The length of reproductive seasons among the four species seemed to relate to maturity size and/or interspecific differences in thermal adaptation.

BaTiO3/SrTiO3, BaTiO3/BaZrO3, and SrZrO3/SrTiO3 artificial superlattices were fabricated on SrTiO3 substrates by the molecular beam epitaxy (MBE) process. The stacking periodicity of each layer was varied from 1 unit cell to 40 unit cells, and the total thickness was fixed at 80 unit cells. In-situ reflection high-energy electron diffraction (RHEED) and x-ray diffraction (XRD) clearly shows the formation of the superlattice structure. Their lattice parameters obtained from the reciprocal space mapping measurement indicated that the lattice distortion was dependent on the stacking periodicity. The capacitance and the complex admittance of the superlattices were measured with interdigital electrodes by an impedance analyzer up to 110 MHz. It was found that the dielectric permittivity changed with the superlattice periodicity. The Q-V measurement results showed clear hysteresis curves and this suggested that ferroelectricity was induced into the SrZrO3/SrTiO3 superlattices despite a combination between paraelectrics/paraelectrics.

Dielectric permittivity (εr) of BaTiO3(BTO) powders was determined by measuring εr of slurries prepared from BTO powder and propylene carbonate as dispersion medium, followed by analyzing with a finite element methods (FEM). The εr of powders depended on their characters such as tetragonality (c/a ratio), density, particle size and specific surface area. In order to extract the effect of each character, a statistical analysis was carried out to represent the εr of powders with an empirical formula, where the c/a ratio, density and particle size were used as parameters. A fairly good agreement between observed data and those expected from the formula was obtained and the contribution of each character to the εr could be determined.

For tetragonal barium titanate (BaTiO3) single crystals, an electric field (E-field) applied along [111]c direction can induce an engineered domain configuration. In this study, the engineered domain structures with different domain sizes were induced into BaTiO3 single crystals, and their piezoelectric properties were investigated as a function of a domain size. Prior to this study, the dependence of domain configuration on the temperature and the E-field was investigated using a polarizing microscope in order to understand the optimum condition for fine and coarse domain structures. As a result, above Curie temperature (Tc) of 132.2 °C, when the E-field over 6 kV/cm was applied along [111]c direction, the engineered domain configuration with fine domain structure appeared. Moreover, it was also found that this fine domain structure was still stable at room temperature without E-field. On the other hand, the coarse domain structure was obtained by poling at just below Tc. Finally, the piezoelectric properties were measured using the 31 resonators with different kinds of domain sizes. As the result, it was found that the piezoelectric properties such as d31 and k31 increased significantly with decreasing domain sizes.

ZnO (ZO) and Aluminum (Al) doped ZnO (AZO) films were grown on sapphire substrate via oxygen radical assisted molecular beam epitaxy (MBE) technique. The results of XRD measurement and temperature dependent Hall measurement confirmed that the AZO films were typically highly degenerate semiconductor with good crystallinity. The resistivity of these films were closed to the theoretical lower limit. The optical properties of these films were investigated by photoluminescence (PL) spectra and absorption spectra. Strong band-edge emission was observed in the AZO films with good crystallinity in spite of high carrier concentration more than 1020 cm-3. A sift of absorption edge to higher energy side and a gradual increase of the absorption was observed for the AZO film.

The effects of shell resource and interspecific competition on sexual size dimorphism of the hermit crab, Pagurus middendorffii (Decapoda: Paguridae), were examined from population comparisons. Degree of size dimorphism and mean shell size occupied by male and female P. middendorffii differed among adjacent sites, and there was a significant correlation between them. Although most large P. middendorffii occupied large Chlorostoma lischkei shells in both shell-limited and shell-unlimited populations, P. lanuginosus, a sympatric species, occupied large C. lischkei shells more frequently than P. middendorffii did in a shell-limited population. Environmental factors, shell availability and interspecific competition for shells, might play important roles in determining the degree of sexual size dimorphism of P. middendorffii.

The growth of bulk GaN by sublimation method and a homoepitaxial growth by MOCVD are reported. A photo-pumped stimulated emission is obtained from a homoepitaxial layer. The source powder used as a source in the sublimation method is investigated in detail, and it is shown that the powder contains many kinds of compounds consisting mainly of gallium, nitrogen and hydrogen. Growth nucleation control is performed by partly covering an MOCVD-GaN or a scratched-sapphire (0001) by Si02. Hexagonal columns of the size of about 200 μm in diameter and about 200 μm in height are selectively and uniformly grown at the window sites. This technique enables the device processing of crystallites and also helps to increase crystal size by increasing growth time, since it prevents the nucleation of new crystallites which work as sink of the growing species.