Feed intake, a critical factor for dairy cows during the postpartum period, is intricately linked to the rumen microbiome. However, the specific roles of rumen metagenome and metabolome in modulating feed intake in postpartum dairy cows remain unclear. In the current study, 20 postpartum dairy cows were divided into low feed intake (n = 5) and high feed intake (HFI, n = 5) groups to investigate the role of ruminal microbial composition, function, and metabolism on feed intake using a combined approach of metagenomics and metabolomics. Our analysis revealed a significant enrichment of Bacteroides and Fibrobacter in HFI cows (p < 0.05), contributing to enhanced protein and energy metabolism. Metabolomic analysis disclosed that HFI cows exhibited a higher relative concentration of rumen metabolites, such as alpha-tocopheryl acetate (fold change = 9.2, p = 0.008), linoleic acid (fold change = 5.96, p = 0.007), and leucine (fold change = 4.14, p = 0.004). Spearman correlation analysis pinpointed a positive correlation between specific microbiota (Succinivibrionaceae and Prevotellaceae) and metabolites involved in amino acid and peptide metabolism, fatty acid metabolism, and conjugates. Furthermore, co-occurrence network analysis showed that the unclassified_f_Succinivibrionaceae, Succinatimonas, and Ruminobacte were significantly associated with dry matter intake-associated metabotypes, including rumen metabolites involved in fatty acids and conjugates, favonoids, and gycerophosphocholines. The feed intake variation explained by the rumen microbiome, functions, and metabolites were 29.63%, 27.30%, and 33.50%, respectively. These findings provide comprehensive insights into rumen metagenomics at different feed intake levels in postpartum dairy cows, potentially guiding strategies to manipulate the rumen microbiome for feed intake and production improvement.

The objective of this study was to understand and measure epigenetic changes associated with the occurrence of CHDs by utilizing the discordant monozygotic twin model. A unique set of monozygotic twins discordant for double-outlet right ventricles (DORVs) was used for this multiomics study. The cardiac and muscle tissue samples from the twins were subjected to whole genome sequencing, whole genome bisulfite sequencing, RNA-sequencing and liquid chromatography-tandem mass spectrometry analysis. Sporadic DORV cases and control fetuses were used for validation. Global hypomethylation status was observed in heart tissue samples from the affected twins. Among 36,228 differentially methylated regions (DMRs), 1097 DMRs involving 1039 genes were located in promoter regions. A total of 419 genes, and lncRNA–mRNA pairs involved 30 genes, and 62 proteins were significantly differentially expressed. Multiple omics integrative analysis revealed that five genes, including BGN, COL1A1, COL3A1, FBLN5, and FLAN, and three pathways, including ECM-receptor interaction, focal adhesion and TGF-β signaling pathway, exhibited differences at all three levels. This study demonstrates a multiomics profile of discordant twins and explores the possible mechanism of DORV development. Global hypomethylation might be associated with the risk of CHDs. Specific genes and specific pathways, particularly those involving ECM–receptor interaction, focal adhesion and TGF–β signaling, might be involved in the occurrence of CHDs.

This paper details an investigation into the effect of martensite–austenite (M–A) constituent on impact toughness of intercritical heat-affected zone (IC HAZ) in Q690 steel, a low carbon bainitic steel. Large samples with uniform microstructure similar to that of the actual IC HAZ were achieved through combinations of heat treatments. The samples were heated to temperature between 750 and 830 °C for 30 min and then quenched in water. After these heat treatments, hard martensite islands distribute along the boundaries of soft matrix, and the size of martensite islands increases with heating temperature. The microstructure is quite similar to that of the IC HAZ. Using these large samples, the impact toughness could be measured conveniently. It was found that the embrittlement of the IC HAZ depends on the deformability and size of the M–A constituent. When the size of the M–A constituent whose deformability is low exceeds a critical value (2.0 μm), the embrittlement of the IC HAZ occurs.

The influence of predeformation and stress on the isothermal bainite transformation has been investigated in G55SiMoV steel via microstructure observation and kinetic analysis. It was found that the bainite transformation became faster and at the end of isothermal holding the bainite fraction increased under the applied stress condition. When the stress increased to 150 MPa, the bainite distribution became to be nonrandom in G55SiMoV steel. Different deformation conditions, in which both promotion and inhibition occurred in the same steel, were created. The promoting and inhibiting factors affected bainite transformation comprehensively. 20% deformation could promote the bainite transformation when it deformed at 900 °C, but prevent bainite transformation when it deformed at 750 °C. Increase of ferrite nucleation rate caused by distortion and dislocation, would suppress the growth of bainite carbides and make most carbides without full growth be finer and shorter.

Various heat treatments and thermal simulation with different austenitizing temperatures and austenite deformation were applied on a bearing steel to obtain various austenitic state. The effect of austenitic state on microstructure of martensite/bainite (M/B) dual phase steel and its mechanical property has been investigated via microstructure observation and kinetic analysis. The results show that the M/B steels austenitized at 900 and 950 °C have better comprehensive performance compared with the steels austenitized at 850 and 1050 °C. The refined microstructure can be obtained after deformation, and the heavy deformation and low deformation temperature are useful for refining the microstructure. The bainite lath is longer and has well-directional arrangement at high austenitizing temperature with the same deformation. Furthermore, austenite deformation can improve the nucleation ratio, reduce incubation process, and affect the kinetics of bainite transformation significantly.

Mutations in the thyroglobulin (TG) gene, which has an estimated incidence of approximately 1 in 100,000 new-borns, cause autosomal recessive congenital hypothyroidism. The mutational spectrum of the TG gene and the phenotype–genotype correlations have not yet fully been established. We report a compound heterozygous mutation in the TG gene in a Chinese twin family with congenital goiter and hypothyroidism. We also describe the gene mutation associated with the genotype–phenotype of these children with congenital goiter and hypothyroidism. The whole coding sequence of the TG gene was analyzed by direct sequence, and the identified changes in the sequence were tested for benign polymorphism by denaturing high-performance liquid chromatography screening of the mutation and sequencing 200 chromosomes from normal controls. Analysis of the TG gene of the affected twin revealed a compound heterozygous mutation, including a novel missense mutation G2687A, which is predicted to result in a glutamine to arginine substitution at codon 877, and a known nonsense mutation C7006T, predicted to result in an arginine to stop codon at codon 2317. Analysis of 200 normal chromosomes did not identify the same change in healthy subjects. This is the first report of a TG gene mutation in the Chinese Han population. Our study provides further evidence that mutations in the TG gene cause congenital goiter and hypothyroidism, demonstrates genetic heterogeneity of the mutation, and increases our understanding of phenotype–genotype correlations in congenital hypothyroidism.

The oxidation behavior of three types of plasma-enhanced chemical vapor deposition (PECVD) processed Ti–Si–C–N coatings with silicon content ranging from 4.3 to 11.6 at.% has been investigated at high temperatures. Systematic characterization was conducted to study the evolution of composition, phase constituents, hardness, surface morphologies, microstructures, and grain size during oxidation. A two-stage oxidation process was observed between 700 and 1000 °C for all three coatings. Experimental results indicate that a superhardness of 40 GPa can be maintained up to 700, 800, and 850 °C for 4.3, 7.4, and 11.6 at.% Si coatings, respectively; the dual-phased 7.4 and 11.6 at.% Si coatings show a better oxidation resistance than the single-phased 4.3 at.% Si coating. On the basis of the results, a mechanism is proposed to explain the relationship between the nanostructure and oxidation behavior.

A new type of Ti–Si–C–N coatings deposited on high-speed steel substrate by means of pulsed direct current (dc) plasma-enhanced chemical vapor deposition was investigated. The as-deposited coatings were characterized systematically by using energy-dispersive x-ray spectroscopy, x-ray diffraction (XRD), transmission electron microscopy (TEM), and microhardness with particular attention paid to the microstructure of the coatings. It has been shown that C content has a profound effect on the microstructure and hardness of coatings. TEM and XRD analyses revealed that these coatings consist of the dominate Ti(C, N) with a silicide (TiSi2, Si3N4, or SiC, depending on the C content in the coatings). The crystallite sizes are in the range of 8–35 nm, which decrease with increasing C content. The Ti–Si–C–N coatings with high C content (25.2–38.6 at.%) possess superhardness (41–48 GPa). This can be attributed to the grain refinement/grain boundary hardening and dispersion hardening of the hard, nanosized crystalline Si3N4 or SiC formed in the deposition.