Hakite-(Cd), hakite-(Fe) and hakite-(Zn) are new minerals belonging to the tetrahedrite group and forming, along with hakite-(Hg), the hakite series. They have been discovered in samples collected from the Bytíz deposit, in the uranium and base-metal Příbram ore district, Central Bohemia, Czech Republic. They occur as anhedral grains, up to 300 μm in size, in a calcite gangue, associated with clausthalite, cadmoselite, hakite-(Hg) [for hakite-(Cd)], berzelianite, bukovite, bytízite, crookesite, chaméanite, eskebornite, příbramite, the not yet approved giraudite-(Hg) and giraudite-(Cu), hakite-(Hg), umangite, chalcopyrite, tetrahedrite-(Zn) and a new Cu–As selenide [for hakite-(Fe) and -(Zn)]. The three new species are black, with a metallic lustre. Mohs hardness is ca. 3½–4; calculated density is 6.019 (Hak-Cd), 6.011 (Hak-Fe) and 6.081 g.cm–3 (Hak-Zn). In reflected light, they are isotropic, pale grey with bluish (Hak-Cd) or brownish (Hak-Fe and Hak-Zn) shades. Empirical formulae of hakite-(Cd), hakite-(Fe), and hakite-(Zn) are Cu9.71Ag0.24Cd1.51Hg0.43Zn0.03(Sb3.94As0.13)Σ4.07Se11.35S1.57, Cu10.11Ag0.18Fe0.81Zn0.50Hg0.26(Sb3.72As0.41)Σ4.13Se12.65S0.12, and Cu10.03Ag0.24Zn0.61Fe0.53Hg0.45(Sb3.55As0.60)Σ4.15Se12.82S0.08, respectively. These formulae correspond to the end-member formulae Cu6(Cu4Cd2)Sb4Se13 (Hak-Cd), Cu6(Cu4Fe2)Sb4Se13 (Hak-Fe), and Cu6(Cu4Zn2)Sb4Se13 (Hak-Zn). All these new members of the hakite series are cubic, I$\bar{4}$3m, Z = 2, with unit-cell parameters a = 10.8860(6) Å, V = 1290.0(2) Å3 (Hak-Cd); a = 10.7983(4) Å, V = 1259.12(14) Å3 (Hak-Fe); and a = 10.8116(14) Å, V = 1263.8(5) Å3 (Hak-Zn). These species are isotypic with the other members of the tetrahedrite group, and their crystal structures have been refined on the basis of single-crystal X-ray diffraction data down to R1 values of 0.0230 (Hak-Cd), 0.0254 (Hak-Fe), and 0.0302 (Hak-Zn). These structural data allow us to describe the S-to-Se partitioning in hakite-series minerals and to understand the mechanisms avoiding too short Me–Se distances in these selenides.

Tetrahedrite-(Cu), Cu12Sb4S13, has been approved as a new mineral species (IMA2022–078) from the Bankov magnesite deposit near Košice, Slovak Republic where it occurs as anhedral grains, up to 0.4 mm across, associated with skinnerite, chalcostibite, famatinite, tetrahedrite-(Fe) and zoned aggregates of tennantite-(Cu) to tennantite-(Fe). Tetrahedrite-(Cu) is steel-grey, with a metallic lustre. Mohs hardness is ca. 3½–4 and calculated density is 5.029 g.cm–3. In reflected light, tetrahedrite-(Cu) is isotropic and grey with a bluish shade. Reflectance data for the four COM wavelengths in air are [λ (nm): R (%)]: 470: 31.1; 546: 30.1; 589: 29.9; and 650: 28.1. The empirical formula, based on electron-microprobe data (mean of 17 spot analyses), is Cu11.42Zn0.26Fe0.19(Sb4.06As0.08)Σ4.14S12.99. The ideal formula is Cu6(Cu4Cu2)Sb4S13, which requires (in wt.%) Cu 45.76, Sb 29.23 and S 25.01, total 100.00. Tetrahedrite-(Cu) is cubic, I$\bar{4}$3m, with unit-cell parameters a = 10.3296(15) Å, V = 1102.2(5) Å3 and Z = 2. Its crystal structure was refined by single-crystal X-ray diffraction data to a final R1 = 0.0347 on the basis of 261 unique reflections with Fo > 4σ(Fo) and 22 refined parameters. Tetrahedrite-(Cu) is isotypic with other tetrahedrite-group minerals. Previous findings of tetrahedrite-(Cu) are reported and some nomenclature issues, related to the Fe and Cu oxidation states, are discussed. At the Bankov deposit, tetrahedrite-(Cu) is related to hydrothermal, most probably Alpine, solutions strongly enriched in Cu, Sb and S.

Watanabeite from the Pefka epithermal deposit, northeastern Greece, was examined using single-crystal X-ray diffraction and electron microprobe analysis. The empirical formula of watanabeite is Cu3.93Fe0.10Ag0.01Pb0.23As1.55Sb0.19S4.99. This mineral is orthorhombic, space group Amm2, with unit-cell parameters a = 10.9601(5), b = 14.6498(8), c = 10.3001(5) Å, V = 1653.82(14) Å3 and Z = 8. The crystal structure was solved and refined to R1 = 0.0471 for 2108 unique reflections with Fo > 4σ(Fo) and 123 refined parameters. The crystal structure of watanabeite can be described as a three-dimensional framework of Cu-centred tetrahedra; cavities of the tetrahedral scaffolding host Cu6S and As2(Pb,Sb,As)2S7 clusters. On the basis of structural data, the formula of watanabeite could be written as [III]Cu3[IV]Cu5As3(Pb,Sb,As)S10 (Z = 4), considering the three independent three-fold Cu sites and the three independent tetrahedrally coordinated Cu sites as aggregated positions. The occurrence of Pb2+ in watanabeite is probably related to the substitution Cu+ + (As,Sb)3+ = 2Me2+, where Me = Pb, Fe, Zn and formally divalent Cu. The relationships with tetrahedrite-group minerals are discussed on the basis of the refined structural model, highlighting possible crystal chemical implications of such relationships.

Arsenoústalečite is a new mineral discovered in a sample collected from the abandoned Ústaleč deposit near Horažďovice, SW Bohemia, Czech Republic. It occurs as rare anhedral grains, up to 40 μm in size, in a calcite gangue, associated with stibioústalečite, hakite-(Hg), berzelianite and uraninite. Arsenoústalečite is dark grey, with a metallic lustre. Mohs hardness is ca. 3½–4; calculated density is 5.730 g/cm3. In reflected light, arsenoústalečite is pale grey with a yellowish shade; it is isotropic. Internal reflections were not observed. Reflectance values for the four COM wavelengths in air [R (%) λ (nm)] are: 33.3 (470); 33.1 (546); 33.0 (589); and 32.9 (650). The empirical formula of arsenoústalečite is (Cu5.81Ag0.17)Σ5.98(Cu5.95Fe0.02Zn0.02Hg0.01)Σ6.00(As1.40Sb0.87Te1.73)Σ4.00(Se10.30S2.32)Σ12.61. The ideal formula is Cu12(As2Te2)Se13, which requires (in wt.%) Cu 34.76, As 6.83, Te 11.63, Se 46.78, total 100.00. Arsenoústalečite is cubic, I$\bar{4}$3m, with unit-cell parameters a = 10.6580(19) Å, V = 1210.7(6) Å3 and Z = 2. The strongest reflections of the calculated powder X-ray diffraction pattern [d, Å (I, %) hkl] are: 3.077 (100) 222, 2.848 (10) 321, 1.946 (12) 521, 1.884(52) 440 and 1.608(21) 622. According to the single-crystal X-ray diffraction data (R1 = 0.0285 on the basis of 334 unique reflections with Fo > 4σFo and 24 refined parameters), arsenoústalečite is isotypic with other tetrahedrite-group minerals. The crystal structure of co-existing stibioústalečite, with an empirical formula of (Cu5.69Ag0.07)Σ5.76(Cu5.80Zn0.13Fe0.06Hg0.01)Σ6.00(Sb1.82As0.42Te1.76)Σ4.00(Se9.52S3.10)Σ12.62 and unit-cell parameters a = 10.6975(16) Å, V = 1224.2(5) Å3 and Z = 2, was refined to R1 = 0.0191 on the basis of 267 unique reflections with Fo > 4σFo and 24 refined parameters. Structural relationships and crystal-chemistry of both members of the ústalečite series are discussed. Arsenoústalečite is named after its type locality, the Ústaleč deposit and its chemical composition. The mineral and its name have been approved by the Commission on New Minerals, Nomenclature and Classification of the International Mineralogical Association (IMA2022-116).

Cotype material of stibiogoldfieldite from the Mohawk mine, Goldfield, Nevada, USA, has been examined in order to collect single-crystal X-ray diffraction data of Te-rich stibiogoldfieldite and to characterise the associated Ag–Bi–(S,Se) phase. Tellurium-rich stibiogoldfieldite, with empirical formula (Cu11.30Ag0.03)Σ11.33(Sb0.80As0.57Bi0.06Te2.57)Σ4.00(S12.83Se0.20)Σ13.03, is cubic, space group I$\bar{4}$3m, with unit-cell parameters a = 10.2947(3) Å and V = 1091.04(10) Å3. Its crystal structure has been refined to R1 = 0.0161 for 397 unique reflections with Fo > 4σ(Fo) and 25 refined parameters. The structure refinement confirmed the occurrence of a vacancy at the M(2) site, in agreement with the substitution M(2)Cu+ + X(3)(Sb/As)3+ = M(2)□ + X(3)Te4+. The Ag–Bi–(S,Se) phase was identified as the 6P homologue of the pavonite series, namely dantopaite. Its empirical formula is Cu1.36Ag4.39Pb0.12Bi12.62Sb0.06(S14.01Se7.91Te0.08), showing an exceptionally high Se content. Unit-cell parameters of Se-bearing dantopaite are a = 13.518(2), b = 4.0898(6), c = 18.984(3) Å, β = 106.816(6)°, V = 1004.7(3) Å3 and space group C2/m. The crystal structure was refined to R1 = 0.0504 for 1230 unique reflections with Fo > 4σ(Fo) and 82 refined parameters. The metal excess (~0.55 atoms per formula unit) of this pavonite homologue is mainly due to the accumulation of Ag and Cu in the thin slab of the crystal structure, whereas the high Se content is related to the partial replacement of S occurring preferentially in the thick PbS-like slab. Domains richer in Se and Pb in dantopaite, with empirical formula Cu0.89Ag4.50Pb0.49Bi12.53Sb0.07(S11.26Se10.74), were also identified, as grains up to 30 μm in size intimately intergrown with bohdanowiczite, indicating the possibility of a wide Se-to-S substitution in dantopaite.

Following a network analysis approach, the present study aims to explore the pattern of mutual relationships between failure in reflective functioning (RF) – defined as hypomentalization – problematic social networking sites use (PSNSU), attachment anxiety and avoidance, and childhood maltreatment among emerging adults, with a focus on gender differences. The study sample comprises N = 1,614 emerging adults (Mage = 23.84; SD = 3.21; 50% identified themselves as women) who completed online self-assessment measures. Results showed significantly greater PSNSU, hypomentalization, childhood emotional abuse, and both attachment avoidance and anxiety among women. Indeed, within the network analysis, performed separately for men and women, network-specific associative patterns were observed; yet also similarities have emerged. Within the women’s network, differently from males, attachment avoidance connects, through attachment anxiety, to emotional abuse, mood modification related to PSNSU, and hypomentalization. Nonetheless, hypomentalization was central in both networks, functioning as a hub between attachment anxiety, the PSNSU cluster, and the childhood maltreatment cluster. These results shed light on the use of social network sites as a potential maladaptive emotion regulation strategy, particularly among women. In this regard, the role of RF should be considered as a key treatment target to reduce PSNSU and support the use of adaptive emotion regulation strategies.

Following the identification of a new occurrence of melanostibite from the Apuan Alps, the crystal chemistry of this mineral has been re-examined using specimens from its type locality, Sjögruvan, Örebro County, Sweden, and from the new occurrence, the Scortico–Ravazzone Mn ore deposit, Apuan Alps, Tuscany, Italy. Both specimens were examined through electron microprobe analysis, micro-Raman spectroscopy and single-crystal X-ray diffraction data; Mössbauer spectroscopy was used for the Swedish specimen. Electron microprobe data indicate a close to ideal composition Mn2Fe3+Sb5+O6 for both samples, whereas Mössbauer spectroscopy confirmed the trivalent oxidation state of Fe. Single-crystal X-ray diffraction for the Swedish and Italian specimens points to the acentric nature of melanostibite, space group R3. Refined unit-cell parameters of melanostibite from Scortico–Ravazzone and Sjögruvan are a = 5.2351(3), c = 14.3645(8) Å, V = 340.93(4) Å3, and a = 5.2314(2), c = 14.3518(8) Å, V = 340.15(3) Å3, respectively. Melanostibite is an homeotypic derivative of pyrophanite.

Stibiogoldfieldite, Cu12(Sb2Te2)S13, was approved as a new mineral species from the Mohawk mine, Goldfield mining district, Esmeralda County, Nevada, USA. It occurs as metallic anhedral grains, dark grey in colour. It is associated with quartz, pyrite and an Ag–Bi–(S,Se) phase (holotype material) and with quartz, pyrite, calaverite, bismuthinite, bohdanowiczite, and the Ag–Bi–(S,Se) phase (cotype material). In reflected light, stibiogoldfieldite is isotropic, grey in colour, with indistinct brownish shade. Reflectance data in air [R (%)] are: 31.1 at 470 nm, 30.9 at 546 nm, 30.8 at 589 nm and 31.0 at 650 nm. Electron microprobe analysis for holotype material gave (in wt.% – average of 60 spot analyses): Cu 45.03(60), Ag 0.26(7), Fe 0.02(3), Zn 0.13(15), Sn 0.02(4), Pb 0.05(6), Sb 8.02(62), As 2.80(65), Bi 2.77(87), Te 15.15(1.24), S 24.50(32), Se 0.52(11), total 99.27(69). On the basis of (As + Sb + Te + Bi) = 4 atoms per formula unit (apfu), the empirical formula of stibiogoldfieldite is (Cu12.05Ag0.04Zn0.03Fe0.01)Σ12.13(Sb1.12As0.63Bi0.23Te2.02)Σ4.00(S12.99Se0.11)Σ13.10. Chemical data on an additional sample from the same locality (cotype material) gave the following results (in wt.% – average of 181 spot analyses): Cu 43.84(63), Ag 0.21(7), Sb 5.92(78), As 2.63(45), Te 20.07(1.19), S 25.13(53), Se 0.97(35), total 99.47(66). On the basis of (As + Sb + Te + Bi) = 4 apfu, the empirical formula of cotype material is (Cu11.30Ag0.03)Σ11.33(Sb0.80As0.57Bi0.06Te2.57)Σ4.00(S12.83Se0.20)Σ13.03. Stibiogoldfieldite is cubic, I$\overline 4$3m, with unit-cell parameters a = 10.3466(17) Å, V = 1107.6(5) Å3 and Z = 2 (holotype). Unit-cell parameters for the cotype sample are a = 10.3035(2) Å and V = 1093.83(7) Å3. The crystal structure of holotype stibiogoldfieldite was refined by single-crystal X-ray diffraction data to a final R1 = 0.032 on the basis of 285 reflections with Fo > 4σ(Fo) and 20 refined parameters. Stibiogoldfieldite is isotypic with other members of the tetrahedrite group.

Tetrahedrite-(Hg), Cu6(Cu4Hg2)Sb4S13, has been approved as a new mineral species using samples from Buca della Vena mine (hereafter BdV), Italy, Jedová hora (Jh), Czech Republic and Rožňava (R), Slovakia. It occurs as anhedral grains or as tetrahedral crystals, black in colour, with metallic lustre. At BdV it is associated with cinnabar and chalcostibite in dolomite veins. At Jh, tetrahedrite-(Hg) is associated with baryte and chalcopyrite in quartz–siderite–dolomite veins; at R it is associated with quartz in siderite–quartz veins. Tetrahedrite-(Hg) is isotropic, greyish-white in colour, with creamy tints. Minimum and maximum reflectance data for Commission on Ore Mineralogy wavelengths in air (BdV sample), R in %) are 32.5 at 420 nm; 32.9 at 546 nm; 33.2 at 589 nm; and 30.9 at 650 nm. Chemical formulae of the samples studied, recalculated on the basis of 4 (As + Sb + Bi) atoms per formula unit, are: (Cu9.44Ag0.07)Σ9.51(Hg1.64Zn0.36Fe0.06)Σ2.06Sb4(S12.69Se0.01)Σ12.70 (BdV), Cu9.69(Hg1.75Fe0.25Zn0.06)Σ2.06(Sb3.94As0.06)S12.87 (Jh) and (Cu9.76Ag0.04) Σ9.80(Hg1.83Fe0.15Zn0.10)Σ2.08(Sb3.17As0.58Bi0.25)S13.01 (R). Tetrahedrite-(Hg) is cubic, I$\overline 4 $3m, with a = 10.5057(8) Å, V = 1159.5(3) Å3 and Z = 2 (BdV). Unit-cell parameters for the other two samples are a = 10.4939(1) Å and V = 1155.61(5) Å3 (Jh) and a = 10.4725(1) Å and V = 1148.55(6) Å3 (R). The crystal structure of tetrahedrite-(Hg) has been refined by single-crystal X-ray diffraction data to a final R1 = 0.019 on the basis of 335 reflections with Fo > 4σ(Fo) and 20 refined parameters. Tetrahedrite-(Hg) is isotypic with other members of the tetrahedrite group. Mercury is hosted at the tetrahedrally coordinated M(1) site, along with minor Zn and Fe. The occurrence of Hg at this position agrees both with the relatively large M(1)–S(1) bond distance (2.393 Å) and the refined site scattering. Previous occurrences of Hg-rich tetrahedrite and tetrahedrite-(Hg) are reviewed, and its relations with other Hg sulfosalts are discussed.