Galium aparine L. var. echinospermum (Wallr.) Cuf., an annual or winter annual broadleaf weed in the Rubiaceae family, has become troublesome due to its herbicide resistance in the wheat fields of the Huang-Huai-Hai region in China. Four cleavers populations (JS-15, SD-10, JS-22, and AH-20) were collected from the wheat fields of Jiangsu, Shandong, and Anhui Province, where florasulam control was absent. This study identified the herbicide resistance patterns and investigated the mechanism underlying the florasulam resistance. The whole-plant dose-response experiments revealed a notable variation in the degree of resistance exhibited by three specific populations towards florasulam, in comparison to the most sensitive populations (S and AH-9), with the highest resistance index reaching 841.4. Acetolactate Synthase gene-sequencing assay found that R plants from JS-15, JS-22, and AH-20 had a Trp-574-Leu mutation, while no known ALS resistance mutations were discovered in SD-10 plants. In vitro ALS enzyme activity assays also indicated that the extractable ALS from the resistant plants of JS-15, JS-22, and AH-20 was greatly resistant to florasulam relative to that of the susceptible. Additionally, according to the resistance rating system, all resistant populations were susceptible to Carfentrazone-ethyl + MCPA-Na and Bipyrazone + Fluroxypyr-methyl. AH-20, JS-15, and JS-22 exhibited resistance to selected ALS, 4-hydroxyphenylpyruvate dioxygenase, and photosystem Ⅱ complex inhibitors, demonstrating RR and RRR resistance profiles, whereas AH-9 displayed S-sensitivity to virtually all tested agents. SD-10, on the other hand, showed RR and RRR resistance to HPPD and PSII inhibitors, but exhibited S-sensitivity specifically to tribenuron-methyl. These findings indicate that a target site-based mechanism drives the resistance to the ALS inhibitor florasulam in cleavers populations, but NTSR resistance may have also contributed (was not investigated). Other herbicides with different sites of action were tested and were active against cleavers.

We develop a latent variable selection method for multidimensional item response theory models. The proposed method identifies latent traits probed by items of a multidimensional test. Its basic strategy is to impose an $L_1$\documentclass[12pt]{minimal}\usepackage{amsmath}\usepackage{wasysym}\usepackage{amsfonts}\usepackage{amssymb}\usepackage{amsbsy}\usepackage{mathrsfs}\usepackage{upgreek}\setlength{\oddsidemargin}{-69pt}\begin{document}$$L_{1}$$\end{document} penalty term to the log-likelihood. The computation is carried out by the expectation–maximization algorithm combined with the coordinate descent algorithm. Simulation studies show that the resulting estimator provides an effective way in correctly identifying the latent structures. The method is applied to a real dataset involving the Eysenck Personality Questionnaire.

The self-generated magnetic field in three-dimensional (3-D) single-mode ablative Rayleigh–Taylor instability (ARTI) relevant to the acceleration phase of a direct-drive inertial confinement fusion (ICF) implosion is investigated. It is found that stronger magnetic fields up to a few thousand teslas can be generated by 3-D ARTI rather than by its two-dimensional (2-D) counterpart. The Nernst effects significantly alter the magnetic field convection and amplify the magnetic fields. The magnetic field of thousands of teslas yields the Hall parameter of the order of unity, leading to profound magnetized heat flux modification. While the magnetic field significantly accelerates the bubble growth in the short-wavelength 2-D modes through modifying the heat fluxes, the magnetic field mostly accelerates the spike growth but has little influence on the bubble growth in 3-D ARTI. The accelerated growth of spikes in 3-D ARTI is expected to enhance material mixing and degrade ICF implosion performance. This work is focused on a regime relevant to direct-drive ICF parameters at the National Ignition Facility, and it also covers a range of key parameters that are relevant to other ICF designs and hydrodynamic/astrophysical scenarios.

This study investigates the flow structures and combustion regimes in an axisymmetric cavity-based scramjet combustor with a total temperature of 1800 K and a high Reynolds number of approximately 1 × 107. The hydroxyl planar laser-induced fluorescence technique, along with the broadband flame emission and CH* chemiluminescence, is employed to visualize the instantaneous flame structure in the optically accessible cavity. The jet-wake flame stabilization mode is observed, with intense heat release occurring in the jet wake upstream of the cavity. A hybrid Reynolds-averaged Navier–Stokes/large-eddy simulation approach is performed for the 0.18-equivalent-ratio case with a pressure-corrected flamelet/progress variable model. The combustion regime is identified mainly in the corrugated or wrinkled flamelet regime (approximately 102 < Da < 104, 103 < Ret < 105 where $Da$ is the Damköhler number and $Re_t$ is the turbulent Reynolds number). The combustion process is jointly dominated by supersonic combustion (which accounts for approximately 58 %) and subsonic combustion, although subsonic combustion has a higher heat release rate (peak value exceeding 1 × 109 J (m3s)−1). A partially premixed flame is observed, where the diffusion flame packages a considerable quantity of twisted premixed flame. The shockwave plays a critical role in generating vorticity by strengthening the volumetric expansion and baroclinic torque term, and it can facilitate the chemical reaction rates through the pressure and temperature surges, thereby enhancing the combustion. Combustion also shows a remarkable effect on the overall flow structures, and it drives alterations in the vorticity of the flow field. In turn, the turbulent flow facilitates the combustion and improves the flame stabilization by enhancing the reactant mixing and increasing the flame surface area.

Timing of food intake is an emerging aspect of nutrition; however, there is a lack of research accurately assessing food timing in the context of the circadian system. The study aimed to investigate the relation between food timing relative to clock time and endogenous circadian timing with adiposity and further explore sex differences in these associations among 151 young adults aged 18–25 years. Participants wore wrist actigraphy and documented sleep and food schedules in real time for 7 consecutive days. Circadian timing was determined by dim-light melatonin onset (DLMO). The duration between last eating occasion and DLMO (last EO-DLMO) was used to calculate the circadian timing of food intake. Adiposity was assessed using bioelectrical impedance analysis. Of the 151 participants, 133 were included in the statistical analysis finally. The results demonstrated that associations of adiposity with food timing relative to circadian timing rather than clock time among young adults living in real-world settings. Sex-stratified analyses revealed that associations between last EO-DLMO and adiposity were significant in females but not males. For females, each hour increase in last EO-DLMO was associated with higher BMI by 0·51 kg/m2 (P = 0·01), higher percent body fat by 1·05 % (P = 0·007), higher fat mass by 0·99 kg (P = 0·01) and higher visceral fat area by 4·75 cm2 (P = 0·02), whereas non-significant associations were present among males. The findings highlight the importance of considering the timing of food intake relative to endogenous circadian timing instead of only as clock time.

Pi-d2, which encodes a potential serine-threonine receptor-like kinase (RLK) membrane-spanning protein consisting of 825 amino acids, confers resistance to Magnaporthe oryzae strain ZB15 via an unidentified recognition mechanism. In this study, the Pid2 alleles of 303 rice (O. sativa) varieties from China's Yunnan region were amplified and sequenced in order to produce 24 haplotypes and 16 translation variants. Six of twenty-four alleles possessing the resistant site at the 441st amino acid were chosen for evaluating blast resistance by transforming into the blast-vulnerable rice variety Nipponbare. After being infected with 11 strains of M. oryzae, all transgenic lines exhibited resistance to ZB-15, whereas resistance to other strains varied. Notably, Pi-d2_H23 and Pi-d2_H24 exhibited resistance to all M. oryzae strains tested, indicating that these two alleles may have a broader resistance spectrum to M. oryzae. Alignment of these alleles’ amino acid sequences revealed that the differences in blast resistance spectra were primarily related to the amino acids present in the PAN domain at position 363 (valine/alanine). These findings suggested that the two extracellular signal recognition domains of PI-D2, B-lectin and PAN, may play a role in the identification of M. oryzae effectors. The present results provide insight into the mechanism of interaction between RLKs and M. oryzae.

Motion and constraint identification are the fundamental issue throughout the development of parallel mechanisms. Aiming at meaningful result with heuristic and visualizable process, this paper proposes a machine learning-based method for motions and constraints modeling and further develops the automatic software for mobility analysis. As a preliminary, topology of parallel mechanism is characterized by recognizable symbols and mapped to the motion of component limb through programming algorithm. A predictive model for motion and constraint with their nature meanings is constructed based on neural network. An increase in accuracy is obtained by the novel loss function, which combines the errors of network and physical equation. Based on the predictive model, an automatic framework for mobility analysis of parallel mechanisms is constructed. A software is developed with WebGL interface, providing the result of mobility analysis as well as the visualizing process particularly. Finally, five typical parallel mechanisms are taken as examples to verify the approach and its software. The method facilitates to attain motion/constraint and mobility of parallel mechanisms with both numerical and geometric features.

Broomcorn millet and foxtail millet were first cultivated in Neolithic China then the process spread west across Asia during the Bronze Age. But the distinctive ceramic, and later bronze, vessels utilised in East Asian cuisines for boiling and steaming grains did not move west alongside these crops. Here, the authors use measurements of 3876 charred millet grains to evaluate regional variations and implications for food preparation. In contrast to wheat grains, which became smaller as their cultivation moved east, millet grains became larger as they spread from northern China into Inner Asia and Tibet. This indicates the decoupling of millets from associated cooking techniques as they reached geographical and cultural areas.

Much attention has been paid to the adsorption of Fe(II) onto mineral surfaces as it is a crucial step in enhancing the reductive activity of Fe(II) species. The present study elucidates the role of Fe(II) adsorbed on Fe (oxyhydr)oxides (γ-FeOOH, α-FeOOH, and α-Fe2O3) for the reductive transformation of 2-nitrophenol (2-NP), using cyclic voltammetry (CV). Studies of Fe(II) adsorption and 2-NP reduction kinetics showed that an increase in pH gave rise to an elevated density of adsorbed Fe(II) on mineral surfaces, which further resulted in an enhanced reaction rate of 2-NP reduction. In addition, CV tests showed that the enhanced activity of Fe(II) species is attributed to the negative shift of peak oxidation potential (EP) of the Fe(III)/Fe(II) couple. The dependence of adsorbed Fe(II) reactivity on pH values was proven by the three linear correlations obtained (ln k vs. pH, EPvs. pH, and ln k vs. EP). The present study demonstrated that the reductive activity of adsorbed Fe(II) species can be indicated by the EP value of active Fe(II) species. Moreover, the electrochemical approach can be used as an effective tool to study the reductive activity of adsorbed Fe(II) species in subsurface environments.

Aging plays a crucial role in the mechanisms of the impacts of genetic and environmental factors on blood pressure and serum lipids. However, to our knowledge, how the influence of genetic and environmental factors on the correlation between blood pressure and serum lipids changes with age remains to be determined. In this study, data from the Chinese National Twin Registry (CNTR) were used. Resting blood pressure, including systolic and diastolic blood pressure (SBP and DBP), and fasting serum lipids, including total cholesterol (TC), high-density lipoprotein cholesterol (HDL-C), low-density lipoprotein cholesterol (LDL-C) and triglycerides (TGs) were measured in 2378 participants (1189 twin pairs). Univariate and bivariate structural equation models examined the genetic and environmental influences on blood pressure and serum lipids among three age groups. All phenotypes showed moderate to high heritability (0.37–0.59) and moderate unique environmental variance (0.30–0.44). The heritability of all phenotypes showed a decreasing trend with age. Among all phenotypes, SBP and DBP showed a significant monotonic decreasing trend. For phenotype-phenotype pairs, the phenotypic correlation (Rph) of each pair ranged from −0.04 to 0.23, and the additive genetic correlation (Ra) ranged from 0.00 to 0.36. For TC&SBP, TC&DBP, TG&SBP and TGs&DBP, both the Rph and Ra declined with age, and the Ra difference between the young group and the older adult group is statistically significant (p < .05). The unique environmental correlation (Re) of each pair did not follow any pattern with age and remained relatively stable with age. In summary, we observed that the heritability of blood pressure was affected by age. Moreover, blood pressure and serum lipids shared common genetic backgrounds, and age had an impact on the phenotypic correlation and genetic correlations.

It is crucial to understand the genetic mechanisms and biological pathways underlying the relationship between obesity and serum lipid levels. Structural equation models (SEMs) were constructed to calculate heritability for body mass index (BMI), total cholesterol (TC), triglyceride (TG), high-density lipoprotein cholesterol (HDL-C), low-density lipoprotein cholesterol (LDL-C), and the genetic connections between BMI and the four classes of lipids using 1197 pairs of twins from the Chinese National Twin Registry (CNTR). Bivariate genomewide association studies (GWAS) were performed to identify genetic variants associated with BMI and lipids using the records of 457 individuals, and the results were further validated in 289 individuals. The genetic background affecting BMI may differ by gender, and the heritability of males and females was 71% (95% CI [.66, .75]) and 39% (95% CI [.15, .71]) respectively. BMI was positively correlated with TC, TG and LDL-C in phenotypic and genetic correlation, while negatively correlated with HDL-C. There were gender differences in the correlation between BMI and lipids. Bivariate GWAS analysis and validation stage found 7 genes (LOC105378740, LINC02506, CSMD1, MELK, FAM81A, ERAL1 and MIR144) that were possibly related to BMI and lipid levels. The significant biological pathways were the regulation of cholesterol reverse transport and the regulation of high-density lipoprotein particle clearance (p < .001). BMI and blood lipid levels were affected by genetic factors, and they were genetically correlated. There might be gender differences in their genetic correlation. Bivariate GWAS analysis found MIR144 gene and its related biological pathways may influence obesity and lipid levels.

According to the positive time-discounting assumption of intertemporal decision-making, people prefer to undergo negative events in the future rather than in the present. However, negative discounting has been identified in the intertemporal choice and loss domains, which refers to people’s preference to experience negative events earlier rather than later. Studies have validated and supported the "anticipated dread" as an explanation for negative discounting. This study again explored the effect of anticipated dread on intertemporal choice using content analysis; that is, having participants identify anticipated dread among reasons for negative discounting. This study also validated the effect of anticipated dread on negative discounting by manipulating anticipated dread. This study adds empirical and direct evidence for the role of anticipated dread in negative discounting.

Intertemporal choices involve tradeoffs between outcomes that occur at different times. Most of the research has used pure gains tasks and the discount rates yielding from those tasks to explain and predict real-world behaviors and consequences. However, real decisions are often more complex and involve mixed outcomes (e.g., sooner-gain and later-loss or sooner-loss and later-gain). No study has used mixed gain-loss intertemporal tradeoff tasks to explain and predict real-world behaviors and consequences, and studies involving such tasks are also scarce. Considering that tasks involving a combination of gains and losses may yield different discount rates and that existing pure gains tasks do not explain or predict real-world outcomes well, this study conducted two experiments to compare the discount rates of mixed gain-loss intertemporal tradeoffs with those of pure gains or pure losses (Experiment 1) and to examine whether these tasks predicted different real-world behaviors and consequences (Experiment 2). Experiment 1 suggests that the discount rate ordering of the four tasks was, from highest to lowest, pure gains, sooner-loss and later-gain, pure losses, and sooner-gain and later-loss. Experiment 2 indicates that the evidence supporting the claim that the discount rates of the four tasks were related to different real-world behaviors and consequences was insufficient.

Lithospheric thinning occurred in the North China Craton (NCC) that resulted in extensive Mesozoic magmatism, which has provided the opportunity to explore the mechanism of the destruction of the NCC. In this study, new zircon U–Pb ages, geochemical and Lu–Hf isotopic data are presented for Early Cretaceous adakitic rocks in the Liaodong Peninsula, with the aim of establishing their origin as well as the thinning mechanism of the NCC. The zircon U–Pb data show that crystallization occurred during 127–120 Ma (i.e. Early Cretaceous). These rocks are characterized by high Sr (294–711 ppm) content and Sr/Y ratio (38.5–108), low Yb (0.54–1.24 ppm) and Y (4.9–16.4 ppm) contents, and with no obvious Eu anomalies, implying that they are adakitic rocks. They are enriched in large-ion lithophile elements (e.g. Ba, K, Pb and Sr) and depleted in high-field-strength elements (e.g. Nb, Ta, P and Ti). These adakitic rocks have negative zircon ϵ Hf(t) contents (−28.9 to −15.0) with two-stage Hf model ages (T DM2) of 3004–2131 Ma. Based on the geochemical features, such as low TiO2 and MgO contents, and high La/Yb and K2O/Na2O ratios, these adakites originated from the partial melting of thickened eclogitic lower crust. They were in an extensional setting associated with the slab rollback of the Palaeo-Pacific Ocean. In combination with previous studies, as a result of the rapid retracting of the Palaeo-Pacific Ocean during 130–120 Ma, the asthenosphere upwelled and modified the thickened lithospheric mantle, which lost its stability, resulting in the lithospheric delamination and thinning of the NCC.

To address the shortcomings of existing methods for rotorcraft searching, positioning, tracking and landing on a ship at sea, a dual-channel LIDAR searching, positioning, tracking and landing system (DCLSPTLS) is proposed in this paper, which utilises the multi-pulse laser echoes accumulation method and the physical phenomenon that the laser reflectivity of the ship deck in the near-infrared band is four orders of magnitude higher than that of the sea surface. The DCLSPTLS searching and positioning model, tracking model and landing model are established, respectively. The searching and positioning model can provide estimates of the azimuth angle, the distance of the ship relative to the rotorcraft and the ship's course. With the above parameters as inputs, the total tracking time and the direction of the rotorcraft tracking speed can be obtained by using the tracking model. The landing model can calculate the pitch and the roll angles of the ship's deck relative to the rotorcraft by using the least squares method and the laser irradiation coordinates. The simulation shows that the DCLSPTLS can realise the functions of rotorcraft searching, positioning, tracking and landing by using the above parameters. To verify the effectiveness of the DCLSPTLS, a functional test is performed using a rotorcraft and a model ship on a lake. The test results are consistent with the results of the simulation.