Glufosinate resistance was previously confirmed in three Palmer amaranth accessions from Arkansas (MSR1, MSR2, and CCR). Greenhouse screening results suggested the presence of multiple herbicide resistance. Therefore, this study aimed to determine the postemergence resistance profile of these three glufosinate-resistant Palmer amaranth accessions. Field experiments were also conducted to assess preemergence and postemergence herbicide options to control the accession with the highest glufosinate resistance level (MSR2). A dose-response assay with the three resistant accessions and two susceptible standards was conducted with the herbicides 2,4-D, atrazine, dicamba, diuron, fomesafen, glyphosate, imazethapyr, and mesotrione. The preemergence and postemergence field experiments with MSR2 evaluated 15 and 16 single active ingredients, respectively. The Palmer amaranth accessions that carried glufosinate resistance were also confirmed to be resistant to six other postemergence herbicides: 2,4-D, diuron, fomesafen, glyphosate, imazethapyr, and mesotrione. CCR is also resistant to dicamba. Therefore, accessions MSR1, MSR2, and CCR have evolved resistance to postemergence herbicides pertaining to seven sites of action. A shift toward increased tolerance to atrazine has also been observed among all resistant accessions. Overall, field preemergence treatments with atrazine, pyroxasulfone, or trifludimoxazin obtained the highest MSR2 control levels at all evaluation times and the lowest number of seedlings emerging at 3 and 6 wk after treatment. In the postemergence experiment, only paraquat obtained MSR2 control levels above 90% at all ratings. The lowest number of alive MSR2 plants was observed after postemergence treatments with paraquat or trifludimoxazin. Fields near where glufosinate resistance has been confirmed in Palmer amaranth will likely demand a more diverse and proactive management strategy that relies on combinations of chemical, cultural, and mechanical control tactics. Future efforts should focus on sequential applications and mixture, the elucidation of all resistance mechanisms in the evaluated accessions, and soil-applied dose-response.

As mid-southern U.S. rice producers continue to adopt furrow-irrigated rice production practices, supplementary management efforts will be vital in combating Palmer amaranth due to the extended germination period provided by the lack of a continual flood. Previous research has revealed the ability of cover crops to suppress Palmer amaranth emergence in corn, cotton, and soybean production systems; however, research on cover crop weed control efficacy in rice production is scarce. Therefore, trials were initiated in Arkansas in 2022 and 2023 to evaluate the effect of cover crops across five site-years on rice emergence, groundcover, grain yield, and total Palmer amaranth emergence. The cover crops evaluated were cereal rye, winter wheat, Austrian winterpea, and hairy vetch. Cover crop biomass accumulation varied by site-year, ranging from 430 to 3,440 kg ha−1, with cereal rye generally being the most consistent producer of high-quantity biomass across site-years. Rice growth and development were generally unaffected by cover crop establishment; however, all cover crops reduced rice emergence by up to 30% in one site-year. Rice groundcover was reduced by 13% from cereal rye in one site-year 2 wk before heading but cover crops did not affect rough rice grain yield in any of the site-years. Palmer amaranth emergence was reduced by 19% and 35% with cereal rye relative to the absence of a cover crop when rice was planted in April in Marianna, and May in Fayetteville, respectively. In most trials, Palmer amaranth emergence was not reduced by a cereal cover crop. In most instances, legume cover crops resulted in less Palmer amaranth emergence than without a cover crop. Based on these results, legume cover crops appear to provide some suppression of Palmer amaranth emergence in furrow-irrigated rice while having a minimal effect on rice establishment and yield.

Cotton producers need residual herbicides that can safely and practically be applied postemergence. Herbicide-coated fertilizers could allow for simultaneous application of residual herbicides and a bulk fertilizer blend. Therefore, a study was conducted in 2022 and 2023 in Fayetteville, AR, to evaluate cotton tolerance to 12 herbicide treatments coated onto a fertilizer blend and applied over cotton. Herbicides and rates evaluated included diuron at 840 g ai ha−1, florpyrauxifen-benzyl at 29 g ai ha−1, flumioxazin at 105 g ai ha−1, flumioxazin + pyroxasulfone at 70 + 90 g ai ha−1, fluridone at 168 g ai ha−1, fluometuron at 840 g ai ha−1, fomesafen at 280 g ai ha−1, pyroxasulfone at 128 g ai ha−1, saflufenacil at 66 g ai ha−1, saflufenacil + dimethenamid-P at 25 + 219 g ai ha−1, saflufenacil + pyroxasulfone at 44 + 91 g ai ha−1, and S-metolachlor at 1,388 g ai ha−1. In both years, fluridone, fluometuron, diuron, and S-metolachlor caused less than 10% injury at 7 d after treatment (DAT). Higher injury levels were observed in 2022 (19% to 30%) compared with 2023 (4% to 12%) for flumioxazin, fomesafen, saflufenacil, saflufenacil plus dimethenamid-P, and saflufenacil + pyroxasulfone. The elevated injury in one of two years was attributed to the presence of dew when the herbicide-coated fertilizer was applied. The initial injury was transient, as the cotton generally had recovered by 28 DAT for all herbicides. No differences in seed cotton yield or groundcover among the herbicide treatments occurred either year. These results highlight the potential of using several postemergence-applied, residual herbicides coated onto fertilizer that are not currently registered for over-the-top use in cotton.

Weeds belonging to the Amaranthus family are most problematic for soybean producers. With Palmer amaranth evolving resistance to multiple herbicides labeled for use in soybean, producers seek new sites of action to integrate into season-long herbicide programs. Bayer CropScience plans to launch a Convintro™ brand of herbicides, one being a premixture that will include diflufenican (categorized as a Group 12 herbicide by the Weed Science Society of America [WSSA]), metribuzin (WSSA Group 5), and flufenacet (WSSA Group 15), for use preemergence in soybean. Research trials were conducted in Fayetteville and Keiser, AR, and Holt, MI, in 2022 and 2023, to evaluate the premixture in a season-long program in a dicamba-resistant soybean system. A 0.17:0.35:0.48 ratio of a premixture of diflufenican:metribuzin:flufenacet (DFF-containing premixture) was applied preemergence with different combinations of glyphosate, glufosinate, dicamba, and acetochlor at 28 (early postemergence) and 42 (late postermergence) days after planting (DAP). At the early postemergence timing, the DFF-containing premixture provided >90% control of Palmer amaranth and prickly sida. However, common ragweed, common lambsquarters, morningglory ssp., and annual grass control was ≤80% at this timing. When the late postemergence applications occurred, treatments that had already received an early postemergence application controlled prickly sida, morningglory ssp., Palmer amaranth, and annual grasses to a greater extent than those that had not, indicating the preemergence application of the DFF-containing premixture was not sufficient to provide control of the weed spectrum through 42 DAP. By 70 DAP, all programs provided ≥93% control of all weeds evaluated. Herbicide programs that included the DFF-containing premixture preemergence followed by (fb) EPOST fb LPOST common ragweed, common lambsquarters, morningglory ssp., and annual grasses to a greater than the one-pass postemergence systems. In addition, all herbicide programs evaluated in this study reduced Palmer amaranth seed production by >99%. However, producers who plan to use the DFF-containing premixture may need two postemergence herbicide applications to obtain high levels of weed control throughout the growing season.

With Palmer amaranth and waterhemp evolving resistance to nine and six different sites of action (SOAs) globally, soybean producers continue to search for new options to control these problematic weeds. Bayer CropScience has announced its intentions to launch a Convintro™ brand of herbicides, one being a three-way premixture for preemergence use in soybean. The premixture will contain diflufenican (WSSA Group 12), metribuzin (WSSA Group 5), and flufenacet (WSSA Group 15), adding a new SOA for soybean producers throughout the United States. With the anticipated launch of the premixture, research is needed to evaluate the length of residual control provided by the new herbicide. Research trials were conducted in Fayetteville and Keiser, AR, and Morrice, MI, in 2022 and 2023. A 0.17:0.35:0.48 ratio of a diflufenican:metribuzin:flufenacet (DFF)-containing premixture was applied alone and in combination with additional metribuzin and dicamba. Also, metribuzin, acetochlor, a S-metolachlor:metribuzin premixture, and a flumioxazin:pyroxasulfone:metribuzin premixture were applied preemergence. The DFF-containing premixture was more effective in reducing Palmer amaranth/waterhemp emergence than acetochlor in four of six trials at 28 d after treatment (DAT). Palmer amaranth and waterhemp densities in plots treated with the DFF-containing premixture exhibited similar results to plots treated with the S-metolachlor:metribuzin premixture and the flumioxazin:pyroxasulfone:metribuzin premixture at 28 DAT. By 56 DAT, Palmer amaranth and waterhemp densities were comparable or superior in plots with the DFF-containing premixture than in those treated with acetochlor and metribuzin, and the S-metolachlor:metribuzin premixture at five of six sites. The addition of dicamba or metribuzin to the DFF-containing premixture did not reduce Palmer amaranth or waterhemp density compared to the DFF-containing premixture at 28 or 56 DAT. Overall, the DFF-containing premixture generally provided greater or comparable control over several standard herbicides, providing growers a new product for preemergence control of Amaranthus species in soybean fields.

Tiafenacil is a new nonselective protoporphyrinogen IX oxidase (PPO)–inhibiting herbicide with both grass and broadleaf activity labeled for preplant application to corn, cotton, soybean, and wheat. Early-season corn emergence and growth often coincides in the mid-South with preplant herbicide application in cotton and soybean, thereby increasing opportunity for off-target herbicide movement from adjacent fields. Field studies were conducted in 2022 to identify the impacts of reduced rates of tiafenacil (12.5% to 0.4% of the lowest labeled application rate of 24.64 g ai ha–1) applied to two- or four-leaf corn. Corn injury 1 wk after treatment (WAT) for the two- and four-leaf growth stages ranged from 31% to 6% and 37% to 9%, respectively, whereas at 2 WAT these respective ranges were 21.7% to 4% and 22.5% to 7.2%. By 4 WAT, visible injury following the two- and four-leaf exposure timing was no greater than 8% in all instances except the highest tiafenacil rate applied at the four-leaf growth stage (13%). Tiafenacil had no negative season-long impact, as the early-season injury observed was not manifested in a reduction in corn height 2 WAT or yield. Application of tiafenacil directly adjacent to corn in early vegetative stages of growth should be avoided. In cases where off-target movement does occur, however, affected corn should be expected to fully recover with no impact on growth and yield, assuming adequate growing conditions and agronomic/pest management practices are provided.

Bayer Crop Science anticipates launching several premixtures for use in soybean, targeted at control of Palmer amaranth. One of the premixtures will contain diflufenican (Weed Science Society of America [WSSA] Group 12), metribuzin (WSSA Group 5), and flufenacet (WSSA Group 15) (DFF-containing premixture), offering an alternative site of action for soybean producers. Field experiments were conducted in Arkansas and Michigan to evaluate application timings of the DFF-containing premixture for soybean tolerance and weed control and possible cultivar tolerance differences to diflufenican and the DFF-containing premixture. Soybean injury from the 1X and 2X rates of the DFF-containing premixture ranged from 0% to 60% 14 d after planting (DAP), with injury increasing the closer the herbicide was applied to soybean emergence. Excluding the 2X rate applied 3 DAP in Arkansas in 2023, soybean injury was <20% regardless of location, site-year, application timing, and rate. For weed control experiments, only a 1X rate of the DFF-containing premixture was applied at the various application timings. Control of five weed species, encompassing broadleafs and grasses, ranged from 81% to 98%, regardless of application timing, by 28 DAP. By 42 DAP, weed control ranged from 71% to 97%, with the 14-d preplant application timing typically being the least effective. The DFF-containing premixture and diflufenican alone were applied PRE at 1X and 2X rates for the soybean cultivar study. Soybean metribuzin sensitivity did not affect the degree of crop response, even in a high-pH soil, and injury to soybean never exceeded 20%. Overall, the DFF-containing premixture will be a tool that soybean producers can integrate into a season-long herbicide program for use across the United States regardless of soybean cultivar.

New technologies in grain sorghum allow for the use of multiple acetyl CoA carboxylase- (ACCase) or acetolactate synthase- (ALS) inhibiting herbicides for johnsongrass control. With the growing issue of herbicide resistance, producers need to understand which herbicides will successfully control johnsongrass accessions. To determine the efficacy of herbicides recently registered or ones with potential to become available for use in grain sorghum, johnsongrass seeds were collected from 2017 to 2021 in Arkansas, Kansas, Texas, and Oklahoma and were screened for sensitivity to fluazifop, quizalofop, nicosulfuron, and imazamox. Additionally, glyphosate sensitivity was evaluated because of its use before planting or postharvest. Quizalofop resulted in 100% mortality of all johnsongrass accessions. Of the johnsongrass accessions evaluated, 89% were completely controlled with glyphosate. The ALS inhibitors nicosulfuron and imazamox resulted in 100% mortality of all Oklahoma accessions, but failures occurred on samples from other states. One accession from Kansas, 12 from Texas, and eight from Arkansas were found to have reduced sensitivity to nicosulfuron and imazamox. If producers plan to plant grain sorghum in areas with johnsongrass populations, an ACCase-inhibitor herbicide will most likely provide effective control. Imazamox and nicosulfuron, in conjunction with the appropriate trait, can be utilized in areas with sensitive johnsongrass populations or where other sensitive grass species are present.

Herbicide-resistant Palmer amaranth is creating additional challenges for producers who choose to adopt a furrow-irrigated rice production system due to the absence of a sustained flood, enabling extended weed emergence. Fluridone has been shown to effectively control Palmer amaranth in cotton production systems and was recently registered for use in rice. Experiments were initiated in 2022 and 2023 1) to evaluate Palmer amaranth control and rice tolerance to preemergence- and postemergence-applied fluridone at 0.5× (84 g ai ha−1) and 1× (168 g ai ha−1) rates on a silt loam soil; and 2) assess the effect of various herbicide programs that contain fluridone on Palmer amaranth biomass, seed production, and rough rice grain yield. Preemergence applications of fluridone at a 1× rate in combination with clomazone resulted in 84% control of Palmer amaranth 21 d after treatment (DAT). Fluridone, in combination with clomazone preemergence, caused up to 36% rice injury 21 DAT; however, early season injury did not negatively affect rice yields. Palmer amaranth biomass and fecundity were reduced with herbicide programs that included fluridone plus florpyrauxifen-benzyl, and, in some instances, there was no Palmer amaranth biomass or seed production following multiple applications of both herbicides. Fluridone- and florpyrauxifen-benzyl–based herbicide programs achieved effective control of Palmer amaranth when applied timely, but injury to hybrid rice is enhanced with preemergence applications of fluridone that are not permitted with the current label.

Barnyardgrass and other troublesome weeds have become a major problem for producers in a flooded rice system. Cultural control options and more efficient herbicide applications have become a priority to increase efficiency and weed control in rice. This study aimed to determine the effects of row width and nozzle selection on spray coverage and weed control in a flooded rice system. A field experiment was conducted at 7 site-years (Lonoke, AR, in 2021 and 2022; Pine Tree, AR, in 2021 and 2022; Rohwer, AR, in 2022; and Stoneville, MS, in 2021 and 2022) as a randomized complete block split-plot design. Five nozzles (XR, AIXR, TTI, TTI60, and AITTJ60) (subplot factor) were used for herbicide applications, and plots were drill-seeded in four row widths (whole plot factor) (13, 19, 25, and 38 cm). A droplet size experiment was conducted to evaluate the droplet size and velocity of each nozzle type used in the field experiment. Overall, as row width increased, barnyardgrass density increased. The rice grown in a wider width took longer to generate canopy closure, allowing weed escapes in the crop. For example, the 13-cm width had a 12 percentage point canopy coverage increase compared to the 38-cm row width at the preflood timing resulting in a reduction of six barnyardgrass plants per square meter. The smallest droplet size-producing nozzle (XR) provided greater weed control throughout the study but is more prone to drift. The dual-fan nozzles (AITTJ60 and TTI60) had variable weed control impacts, and it was difficult to predict when this might occur; however, they did have increased deposits on water-sensitive cards compared to single-fan counterparts (AIXR and TTI). In conclusion, a narrower row width (e.g., 19-cm or less) and a smaller droplet size producing nozzle (XR) are optimal for barnyardgrass control in a flooded rice system.

Furrow-irrigated rice (Oryza sativa L.) has become a popular option for rice production in Arkansas. Highly troublesome weeds like barnyardgrass [Echinochloa crus-galli (L.) P. Beauv.] are a major problem for producers in all rice production systems. Cultural tactics should become a priority to enhance crop growth and competitiveness. This research aimed to determine the effects of bed width (irrigation furrow spacing) and crop row spacing manipulation on E. crus-galli emergence and seed production in a furrow-irrigated rice system. Three bed widths (76, 97, and 152 cm) (whole-plot factor) were used, and plots were drill seeded in four crop row spacings (13, 19, 25, and 38 cm) (subplot factor). The widest width of 152 cm had a slight increase in E. crus-galli density in the early rice life cycle but, by the end of the season, did not differ from the narrower bed widths. Conversely, a decrease in E. crus-galli seed production was observed as the bed width increased. Similar rice canopy coverage and yields occurred among all three bed widths. As for crop row spacing, as the width increased, E. crus-galli density also increased. The 13-cm crop row spacing had the lowest preflood E. crus-galli density, preharvest panicle count, and seed production. No effect of crop row spacing was observed on rice canopy coverage; however, the 13-cm crop row spacing produced the greatest rice yield. The 13-cm crop row spacing paired with the 152-cm bed width may be the optimum combination of ecological strategies in furrow-irrigated rice to reduce E. crus-galli seed production while maintaining rice growth and yield.

The evolution of herbicide resistance in weeds can reduce the herbicide’s efficacy, depleting crop yield and quality. Our group previously confirmed 2,4-D resistance in three Palmer amaranth (Amaranthus palmeri S. Watson) populations (R1 to R3). In the current study, the first filial (F1) seeds of 2,4-D–resistant populations were subjected to screening tests for resistance to other auxin-mimicking herbicides, florpyrauxifen-benzyl (FPB; 30 g ai ha−1) and dicamba (560 g ae ha−1). Dicamba killed all resistant populations. FPB provided 100% control of only the R3 population. Sensitivities to FPB were reduced by 2 and 35 percentage points in R1 and R2 populations, respectively. Pretreatment with malathion increased FPB sensitivity by 15 percentage points in the R2 population. FPB resistance characterization and mechanism were evaluated using a purified line of the R2 population (F2). The FPB sensitivity was 29-fold lower in the F2 line than in the susceptible (S) standard. Absorption, translocation, and total metabolism of FPB were similar for S and R2 populations. However, less florpyrauxifen-acid (FPA) was detected in the R2 population (17.0% to 25.4%) than in the S population (22.8% to 33.2%), due to its rapid metabolism and/or reduced production with resistance evolution. Because the results of the non–target site resistance mechanism evaluation observed in this study were insufficient to account for the 29-fold reduced sensitivity of the R2 population to FPB, further genetic studies are needed to investigate the presence of target-site resistance in that population.

Investigations of the relevance of low-tunnel methodology and air sampling concerning the off-target movement of dicamba were conducted from 2018 to 2022, focused primarily on volatility. This research, divided into three experiments, evaluated the impact of herbicides and adjuvants added to dicamba and the type of surface treated on dicamba volatility. Treatment combinations included glyphosate and glufosinate, the presence of a simulated contamination rate of ammonium sulfate (AMS), the benefit of a volatility reduction agent (VRA), and a vegetated (dicamba-resistant cotton) or soil surface treated with dicamba. Volatility assessments included air sampling collected over 48 h. Dicamba treatments were applied four times to each of two bare soil or cotton trays and placed inside the tunnels. Dicamba from air samples was extracted and quantified. Field assessments included the maximum and average visible injury in bioindicator soybean and the lateral movement of dicamba damage expressed by the farthest distance from the center of the plots to the position in which plants exhibited 5% injury. Adding glufosinate and glyphosate to dicamba increased the dicamba amount in air samples. A simulated tank contamination rate of AMS (0.005% v/v) did not affect dicamba emissions compared to a treatment lacking AMS. Adding a VRA reduced dicamba in air samples by 70% compared to treatment without the adjuvant. Dicamba treatments applied on vegetation generally produced greater detectable amounts of dicamba than treatments applied to bare soil. Field assessment results usually followed differences in dicamba concentration by treatments tested. Results showed that low-tunnel methodology allowed simultaneous comparisons of several treatment combinations concerning dicamba volatility.

Off-target movement of 2,4-D and dicamba is sometimes to blame as the cause of symptoms observed in weeds growing in production fields. Pesticide regulatory authorities routinely sample tissues of weeds or crops from fields under investigation for potential illegal use of auxin herbicides. This research aimed to determine if analytical tests of herbicide residue on soybean or Palmer amaranth vegetation treated with dicamba or 2,4-D could be used to differentiate between rates applied and how the residue levels decay over a 1-mo interval. Four rates of each herbicide (1X, 0.1X, 0.01X, and 0.001X) were applied, with a 1X rate of dicamba and 2,4-D assumed to be 560 and 1,065 g ae ha−1, respectively. Experiments included dicamba- and 2,4-D-resistant soybean (Xtend® and Enlist® traits, respectively) and Palmer amaranth categorized by size (8 to 15 cm, 20 to 30 cm, and 35 to 50 cm in height). Analytical results show that herbicide residues were detected above detection limits of 0.04 µg g−1 for dicamba and 0.004 µg g−1 for 2,4-D, respectively, particularly for samples treated with a 1X and 0.1X rate of dicamba or 2,4-D. Nondetections were frequent, even as early as 2 to 3 d after treatment (DAT), with 0.01X and 0.001X rates of 2,4-D or dicamba. Residues declined rapidly on Xtend® soybean treated with dicamba and on Enlist® soybean treated with 2,4-D. The severity of auxin symptomology generally agreed with the ability to detect dicamba or 2,4-D residue in plant tissue for Palmer amaranth, whereas for soybean, this was not always the case. Hence detecting dicamba or 2,4-D residues in both Palmer amaranth and soybean vegetation, along with visible symptoms on both plants during investigations, would generally indicate an earlier direct application of the auxin herbicide rather than off-target movement being the cause of detection.

Only a limited number of herbicides are available to provide postemergence (POST) control of selective monocot weeds in grain sorghum crops. The herbicides currently labeled for use with grain sorghum have strict use restrictions, low efficacy on johnsongrass, or weed resistance issues. To introduce a new effective herbicide mode of action for monocot control, multiple companies and universities have been developing herbicide-resistant grain sorghum that would allow producers to use herbicides that inhibit either acetolactate synthase (ALS) or acetyl coenzyme A carboxylase (ACCase) for POST monocot control. An experiment was conducted in Fayetteville, AR, in 2020 and 2021, to determine the effectiveness of two ALS-inhibiting herbicides and nine ACCase-inhibiting herbicides on TamArk™ grain sorghum, conventional grain sorghum, and problematic monocot weed species. Grain sorghum and monocot weeds (johnsongrass, broadleaf signalgrass, barnyardgrass, and Texas panicum) were sprayed when TamArk grain sorghum reached the 2- to 3-leaf stage. TamArk grain sorghum was tolerant of all ACCase-inhibiting herbicides tested, exhibiting ≤10% injury at all evaluation timings, except clethodim and sethoxydim, and had no resistance to the ALS-inhibiting herbicides that were evaluated. Additionally, all ACCase inhibitors except diclofop and pinoxaden controlled all monocots tested by >91% at 28 d after application (DAA). Conversely, the two ALS inhibitors, imazamox and nicosulfuron, provided ≤81% control of broadleaf signalgrass 28 DAA but still controlled all other monocots by >95%. TamArk grain sorghum has low sensitivity to multiple ACCase-inhibiting herbicides and thus provides an effective POST option for monocot weed control. In addition, unwanted volunteer TamArk plants can be controlled with cledthodim, sethoxydim, nicosulfuron, or imazamox. Although the ALS-inhibiting herbicides imazamox and nicosulfuron were not useful on TamArk grain sorghum, they are effective options for monocot control on Igrowth™ and Inzen™ grain sorghum crops, respectively.

Genetic similarities between johnsongrass and grain sorghum leave producers with limited herbicide options for postemergence johnsongrass control. TamArkTM grain sorghum with resistance to acetyl-CoA carboxylase-inhibiting herbicides was developed through a collaboration between the University of Arkansas System Division of Agriculture and Texas A&M AgriLife Research. Two field experiments were conducted in 2021 in two locations each: Keiser and Marianna, AR, or Fayetteville and Marianna, AR. The objective of the first was to determine the optimal rate and application timing of fluazifop-butyl for control of natural johnsongrass populations in a noncrop setting, and the objective of the second was to evaluate johnsongrass control and TamArkTM grain sorghum tolerance in response to fluazifop-butyl applied at different timings and rates based on crop growth stage. The highest levels of johnsongrass control occurred when sequential applications of fluazifop-butyl were utilized. All sequential treatments provided at least 80% johnsongrass control at any rate or application timing tested. A single application of fluazifop-butyl provided greater than 90% johnsongrass control when applied at 210 g ai ha−1 to johnsongrass with fewer than 6 leaves. Weed size played a role in achieving high levels of johnsongrass control. Greater than 90% control was achieved when johnsongrass had 6 leaves or fewer at the initial application for the sequential application treatments. A single application of fluazifop-butyl at 105 g ai ha−1 resulted in no more than 82% johnsongrass mortality at any application timing. TamArk™ grain sorghum injury did not exceed 6% at any application timing or rate. It was therefore considered to be safe even if the initial application was made before the 6-leaf crop stage. Because no unacceptable levels of injury were observed with TamArk™ grain sorghum for fluazifop-butyl, johnsongrass size at the time of application should be the most critical aspect for control with this herbicide.

Damage to non–dicamba resistant (non-DR) soybean [Glycine max (L.) Merr.] has been frequent in geographies where dicamba-resistant (DR) soybean and cotton (Gossypium hirsutum L.) have been grown and sprayed with the herbicide in recent years. Off-target movement field trials were conducted in northwest Arkansas to determine the relationship between dicamba concentration in the air and the extent of symptomology on non-DR soybean. Additionally, the frequency and concentration of dicamba in air samples at two locations in eastern Arkansas and environmental conditions that impacted the detection of the herbicide in air samples were evaluated. Treatment applications included dicamba at 560 g ae ha−1 (1X rate), glyphosate at 860 g ae ha−1, and particle drift retardant at 1% v/v applied to 0.37-ha fields with varying degrees of vegetation. The relationship between dicamba concentration in air samples and non-DR soybean response to the herbicide was more predictive with visible injury (generalized R 2 = 0.82) than height reduction (generalized R 2 = 0.43). The predicted dicamba air concentration resulting in 10% injury to soybean was 1.60 ng m−3 d−1 for a single exposure. The predicted concentration from a single exposure to dicamba resulting in a 10% height reduction was 3.78 ng m−3 d−1. Dicamba was frequently detected in eastern Arkansas, and daily detections above 1.60 ng m−3 occurred 17 times in the period sampled. The maximum concentration of dicamba recorded was 7.96 ng m−3 d−1, while dicamba concentrations at Marianna and Keiser, AR, were ≥1 ng m−3 d−1 in six samples collected in 2020 and 22 samples in 2021. Dicamba was detected consistently in air samples collected, indicating high usage in the region and the potential for soybean damage over an extended period. More research is needed to quantify the plant absorption rate of volatile dicamba and to evaluate the impact of multiple exposures of gaseous dicamba on non-targeted plant species.

Allowing the use of two additional modes of action (MOAs), Enlist™ corn is a novelty in the continuum of herbicide-resistant crop development efforts that have occurred since the 1990s. Knowledge of Enlist corn tolerance to labeled herbicides and other herbicides within the same MOA for various use and/or exposure scenarios is not well established. Four site-year field experiments for preemergence (PRE) and postemergence (POST) applications were conducted at sites in Fayetteville (2021 and 2022) and Tillar (2020 and 2021), Arkansas, to evaluate Enlist corn response following PRE or POST applications of synthetic auxin herbicides or those that inhibit acetyl-CoA carboxylase (ACCase). A non-Enlist and an Enlist corn hybrid were used for each herbicide treatment to establish differential tolerance. Injury response to PRE application varied among site-years; clethodim was the only herbicide that occasionally caused significant (7% to 17%) injury to Enlist corn. None of the PRE treatments affected plant height, stand, or yield of Enlist corn; these responses were generally similar or better for Enlist corn compared to non-Enlist corn. Enlist corn showed significant injury to POST applications of florpyrauxifen-benzyl (>10%), fluazifop-P-butyl and quizalofop-P-ethyl (>5%), and clethodim and sethoxydim (>75%) 1 wk after application (WAA). These initial injury responses to clethodim and sethoxydim were generally reflected in Enlist corn yield; however, the minimal injury from fluazifop-P-butyl and quizalofop-P-ethyl did not affect yield. Injury to non-Enlist corn with POST-applied ACCase-inhibiting herbicides 2 WAA was >80%, resulting in a proportionate yield reduction. Even though florpyrauxifen-benzyl caused more initial injury to non-Enlist corn, yield reduction in non-Enlist corn was occasionally less than of Enlist corn, with both hybrids experiencing >75% yield reduction. In summary, Enlist corn may occasionally show transient injury even to labeled herbicides when applied POST, and even though the injury from florpyrauxifen-benzyl is initially mild, it nonetheless results in substantial yield loss.

The threat of herbicide-resistant weed species, such as Palmer amaranth, has driven the development of robust weed management programs that rely on more than chemicals for weed control. Previous research has shown that zero-tolerance weed thresholds, cover crops, deep tillage, and diverse herbicide programs are effective strategies for controlling Palmer amaranth. Unfortunately, research investigating the integration of all four of these weed management strategies in a system is lacking. To better leverage these integrated weed management strategies in cotton production systems, a long-term study was initiated in fall 2018 near Marianna, AR, with zero tolerance, deep tillage, a cereal rye cover crop, and either a dicamba or non-dicamba in-crop herbicide program as factors. Results found that total Palmer amaranth emergence was reduced 76% as the result of deep tillage in 2019 and, in the absence of a zero-tolerance strategy, 73% in 2020. In the absence of a zero-tolerance strategy, the combination of a non–cover crop strategy and dicamba herbicide program decreased total Palmer amaranth emergence by 73%, while the combination of a cover crop strategy and dicamba herbicide program decreased total Palmer amaranth emergence by 78% compared to the combination of a cover crop and non-dicamba herbicide program. Under a zero-tolerance strategy in 2019, tillage reduced cotton yield by 12% and partial returns by US$370 ha−1. In 2020, tillage reduced cotton yield by 14% and partial returns of US$371 ha−1 under a non-zero-tolerance strategy, while a 12% yield reduction and a US$260 ha−1 decrease in partial returns were observed under a zero-tolerance strategy. In 2019, the non-dicamba program resulted in greater partial returns than the dicamba in-crop program because of greater yield and lower program costs. However, in 2020, partial returns were greater for the dicamba in-crop herbicide program owing to greater yields achieved by this program.