Rhopalosiphum padi is an important grain pest, causing severe losses during crop production. As a systemic insecticide, flonicamid can control piercing-sucking pests efficiently. In our study, the lethal effects of flonicamid on the biological traits of R. padi were investigated via a life table approach. Flonicamid is highly efficiently toxic to R. padi, with an LC50 of 9.068 mg L−1. The adult longevity and fecundity of the R. padi F0 generation were markedly reduced under the LC25 and LC50 concentrations of flonicamid exposure. In addition, negative transgenerational effects on R. padi were observed under exposure to lethal concentrations of flonicamid, with noticeable decreases in the reproductive period, adult longevity, total longevity, and total fecundity of the F1 generation under the LC25 concentration of flonicamid. Furthermore, the third nymph stage (N3), preadult stage, duration of the adult pre-reproductive period, duration of the total pre-reproductive period, reproductive period, adult longevity, total longevity, and total fecundity of the F1 generation were significantly lower under treatment with the LC50 concentration of flonicamid. The life table parameters were subsequently analysed, revealing that the intrinsic rate of increase (rm) and the net reproductive rate (R0) were significantly lower but that the finite rate of increase (λ) and the mean generation time (T) were not significantly different under the LC25 and LC50 concentrations of flonicamid. These data are beneficial for grain aphid control and are critical for exploring the role of flonicamid in the integrated management of this key pest.

External seeded free-electron lasers (FELs) have exhibited substantial progress in diverse applications over the last decade. However, the frequency up-conversion efficiency in single-stage seeded FELs, particularly in high-gain harmonic generation (HGHG), remains constrained to a modest level. This limitation restricts its capability to conduct experiments within the ‘water window’. This paper presents a novel method for generating coherent X-ray FEL pulses in the water window region based on the HGHG scheme with multi-stage harmonic cascade. Without any additional modifications to the HGHG configuration, simulation results demonstrate the generation of intense 3 nm coherent FEL radiation using an external ultraviolet seed laser. This indicates an increase of the harmonic conversion number to approximately 90. A preliminary experiment is performed to evaluate the feasibility of this method. The proposed approach could potentially serve as an efficient method to broaden the wavelength coverage accessible to both existing and planned seeded X-ray FEL facilities.

A high-energy pulsed vacuum ultraviolet (VUV) solid-state laser at 177 nm with high peak power by the sixth harmonic of a neodymium-doped yttrium aluminum garnet (Nd:YAG) amplifier in a KBe2BO3F2 prism-coupled device was demonstrated. The ultraviolet (UV) pump laser is a 352 ps pulsed, spatial top-hat super-Gaussian beam at 355 nm. A high energy of a 7.12 mJ VUV laser at 177 nm is obtained with a pulse width of 255 ps, indicating a peak power of 28 MW, and the conversion efficiency is 9.42% from 355 to 177 nm. The measured results fitted well with the theoretical prediction. It is the highest pulse energy and highest peak power ever reported in the VUV range for any solid-state lasers. The high-energy, high-peak-power, and high-spatial-uniformity VUV laser is of great interest for ultra-fine machining and particle-size measurements using UV in-line Fraunhofer holography diagnostics.

This paper presents a numerical study on the flow around two tandem circular cylinders beneath a free surface at a Reynolds number of $180$. The free-surface effects on the wake dynamics and hydrodynamic forces are investigated through a parametric study, covering a parameter space of gap ratios from $0.20$ to $2.00$, spacing ratios from $1.50$ to $4.00$ and Froude numbers from $0.2$ to $0.8$. A jet-like flow accompanied by a shear layer of positive vorticity separating from the free surface is formed in the wake at small gap ratios, which significantly alters the wake pattern through its dynamic behaviours. At shallow submergence depths, the three-dimensional wake transitions from mode B to mode A as the distance between the cylinders increases. As submergence depth increases, the wavy deformation of the primary vortex cores disappears in the wake, and the flow transitions to a two-dimensional state. Higher Froude numbers can extend the effect of the free surface to deeper submergence depths. The critical spacing ratio tends to be larger at higher Froude numbers. Furthermore, the free-surface deformation is examined. The free-surface profile typically comprises a hydraulic jump immediately ahead of the upstream cylinder, trapped waves in the vicinity of the two tandem cylinders and well-defined travelling waves on the downstream side. The frequencies of the waves cluster around the vortex shedding frequency, indicating a close association between the generation of waves and the vortex shedding process.

Compacted bentonite, used as an engineering barrier for permanent containment of high-level radioactive waste, is susceptible to mineral evolution resulting in compromise of the expected barrier performance due to alkaline–thermal chemical interaction in the near-field. To elucidate the mineral-evolution mechanisms within bentonite and the transformation of the nuclide adsorption properties during that period, experimental evolution of bentonite was conducted in a NaOH solution with a pH of 14 at temperatures ranging from 60 to 120°C. The results showed that temperature significantly affects the stability of minerals in bentonite under alkali conditions. The dissolution rate of fine-grained cristobalite in bentonite exceeds that of smectite, with the phase-transition products of smectite being temperature-dependent. As the temperature rises, smectite experiences a three-stage transformation: initially, at 60°C, the lattice structure thins due to the collapse of the octahedral sheets; at 80°C, the lattice disintegrates and reorganizes into a loose framework akin to albite; and by 100°C, it further reorganizes into a denser framework resembling analcime. The adsorption properties of bentonite exhibit a peak inflection point at 80°C, where the dissolution of the smectite lattice eliminates interlayer pores and exposes numerous polar or negatively charged sites which results in a decrease in specific surface area and an increase in cation exchange capacity and adsorption capacity of Eu3+. This research provides insights into the intricate evolution of bentonite minerals and the associated changes in radionuclide adsorption capacity, contributing to a better understanding of the stability of bentonite barriers and the effective long-term containment of nuclear waste.

The inverse dynamics model of an industrial robot can predict and control the robot’s motion and torque output, improving its motion accuracy, efficiency, and adaptability. However, the existing inverse rigid body dynamics models still have some unmodelled residuals, and their calculation results differ significantly from the actual industrial robot conditions. The bootstrap aggregating (bagging) algorithm is combined with a long short-term memory network, the linear layer is introduced as the network optimization layer, and a compensation method of hybrid inverse dynamics model for robots based on the BLL residual prediction algorithm is proposed to meet the above needs. The BLL residual prediction algorithm framework is presented. Based on the rigid body inverse dynamics of the Newton–Euler method, the BLL residual prediction network is used to perform error compensation on the inverse dynamics model of the Franka robot. The experimental results show that the hybrid inverse dynamics model based on the BLL residual prediction algorithm can reduce the average residuals of the robot joint torque from 0.5651 N·m to 0.1096 N·m, which improves the accuracy of the inverse dynamics model compared with those of the rigid body inverse dynamics model. This study lays the foundation for performing more accurate operation tasks using industrial robots.

In recent years, dangerous gas leakage events occur frequently. Rapid and accurate location of gas leakage sources by mobile robots is the key to avoid the expansion of disasters. In order to solve the problem of discontinuous gas concentration gradient and sparse gas environment in three-dimensional space, particle filter, and whale swarm optimization algorithm are integrated to locate gas source. Firstly, the Z-shape search and comb search are used to locate the plume, and then, the particle filter algorithm is combined with the whale optimization method to guide the particle movement, and the random inertial disturbance term is designed to improve the convergence speed and search accuracy of the algorithm. Experimental results in three-dimensional environment show that the proposed information-driven particle filter whale optimization hybrid algorithm effectively guides the robot in localizing gas source within a certain range, significantly enhancing both the efficiency and accuracy of localization compared to other algorithms.

The egg parasitoid Anastatus japonicus is a key natural enemy in the biological control of various agricultural and forestry pests. It is particularly used against the brown marmorated stink bug Halyomorpha halys and the emerging defoliator pest Caligula japonica in East Asia. It has been proved that the eggs of Antheraea pernyi can be used as a factitious host for the mass production of A. japonicus. This study systematically documented the parasitic behaviour and developmental morphology exhibited by A. japonicus on the eggs of A. pernyi. The parasitic behaviour of A. japonicus encompassed ten steps including searching, antennation, locating, digging, probing, detecting, oviposition, host-feeding, grooming, and resting. Oviposition, in particular, was observed to occur in three stages, with the parasitoids releasing eggs during the second stage when the body remained relatively static. Among all the steps of parasitic behaviour, probing accounted for the longest time, constituting 33.1% of the whole time. It was followed by digging (19.3%), oviposition (18.5%), antennation (9.6%), detecting (7.4%), and the remaining steps, each occupying less than 5.0% of the total event time. The pre-emergence of adult A. japonicus involves four stages: egg (0 to 2nd day), larva (3rd to 9th day), pre-pupa (10th to 13th day), pupa (14th to 22nd day), and subsequent development into an adult. Typically, it takes 25.60 ± 0.30 days to develop from an egg to an adult at 25℃. This information increases the understanding of the biology of A. japonicus and may provide a reference for optimising reproductive devices.

The discovery that blazars dominate the extra-galactic $\gamma$-ray sky is a triumph in the Fermi era. However, the exact location of $\gamma$-ray emission region still remains in debate. Low-synchrotron-peaked blazars (LSPs) are estimated to produce high-energy radiation through the external Compton process, thus their emission regions are closely related to the external photon fields. We employed the seed factor approach proposed by Georganopoulos et al. It directly matches the observed seed factor of each LSP with the characteristic seed factors of external photon fields to locate the $\gamma$-ray emission region. A sample of 1 138 LSPs with peak frequencies and peak luminosities was adopted to plot a histogram distribution of observed seed factors. We also collected some spectral energy distributions (SEDs) of historical flare states to investigate the variation of $\gamma$-ray emission region. Those SEDs were fitted by both quadratic and cubic functions using the Markov-chain Monte Carlo method. Furthermore, we derived some physical parameters of blazars and compared them with the constraint of internal $\gamma\gamma$-absorption. We find that dusty torus dominates the soft photon fields of LSPs and most $\gamma$-ray emission regions of LSPs are located at 1–10 pc. The soft photon fields could also transition from dusty torus to broad line region and cosmic microwave background in different flare states. Our results suggest that the cubic function is better than the quadratic function to fit the SEDs.

Syphilis remains a serious public health problem in mainland China that requires attention, modelling to describe and predict its prevalence patterns can help the government to develop more scientific interventions. The seasonal autoregressive integrated moving average (SARIMA) model, long short-term memory network (LSTM) model, hybrid SARIMA-LSTM model, and hybrid SARIMA-nonlinear auto-regressive models with exogenous inputs (SARIMA-NARX) model were used to simulate the time series data of the syphilis incidence from January 2004 to November 2023 respectively. Compared to the SARIMA, LSTM, and SARIMA-LSTM models, the median absolute deviation (MAD) value of the SARIMA-NARX model decreases by 352.69%, 4.98%, and 3.73%, respectively. The mean absolute percentage error (MAPE) value decreases by 73.7%, 23.46%, and 13.06%, respectively. The root mean square error (RMSE) value decreases by 68.02%, 26.68%, and 23.78%, respectively. The mean absolute error (MAE) value decreases by 70.90%, 23.00%, and 21.80%, respectively. The hybrid SARIMA-NARX and SARIMA-LSTM methods predict syphilis cases more accurately than the basic SARIMA and LSTM methods, so that can be used for governments to develop long-term syphilis prevention and control programs. In addition, the predicted cases still maintain a fairly high level of incidence, so there is an urgent need to develop more comprehensive prevention strategies.

China is still among the 30 high-burden tuberculosis (TB) countries in the world. Few studies have described the spatial epidemiological characteristics of pulmonary TB (PTB) in Jiangsu Province. The registered incidence data of PTB patients in 95 counties of Jiangsu Province from 2011 to 2021 were collected from the Tuberculosis Management Information System. Three-dimensional spatial trends, spatial autocorrelation, and spatial–temporal scan analysis were conducted to explore the spatial clustering pattern of PTB. From 2011 to 2021, a total of 347,495 newly diagnosed PTB cases were registered. The registered incidence rate of PTB decreased from 49.78/100,000 in 2011 to 26.49/100,000 in 2021, exhibiting a steady downward trend (χ2 = 414.22, P < 0.001). The average annual registered incidence rate of PTB was higher in the central and northern regions. Moran’s I indices of the registered incidence of PTB were all >0 (P< 0.05) except in 2016, indicating a positive spatial correlation overall. Local autocorrelation analysis showed that ‘high–high’ clusters were mainly distributed in northern Jiangsu, and ‘low–low’ clusters were mainly concentrated in southern Jiangsu. The results of this study assist in identifying settings and locations of high TB risk and inform policy-making for PTB control and prevention.

This research communication reports the effects of a compound enzyme preparation consisting of fibrolytic (cellulase 3500 CU/g, xylanase 2000 XU/g, β-glucanase 17 500 GU/g) and amylolytic (amylase 37 000 AU/g) enzymes on nutrient intake, rumen fermentation, serum parameters and production performance in primiparous early-lactation (47 ± 2 d) dairy cows. Twenty Holstein–Friesian cows in similar body condition scores were randomly divided into control (CON, n = 10) and experimental (EXP, n = 10) groups in a completely randomized single-factor design. CON was fed a basal total mixed ration diet and EXP was dietary supplemented with compound enzyme preparation at 70 g/cow/d. The experiment lasted 4 weeks, with 3 weeks for adaptation and then 1 week for measurement. Enzyme supplementation significantly increased diet non-fibrous carbohydrates (NFC) content as well as dry matter intake (DMI) and NFC intake (P < 0.05). EXP had increased ruminal butyrate and isobutyrate percentages (P < 0.01) but decreased propionate and valerate percentages (P < 0.05), as well as increased serum alkaline phosphatase activity and albumin concentration (P ≤ 0.01). Additionally, EXP had increased milk yield (0.97 kg/d), 4% fat corrected milk yield and energy corrected milk yield, as well as milk fat and protein yield (P < 0.01). In conclusion, dietary supplementation with a fibrolytic and amylolytic compound enzyme preparation increased diet NFC content, DMI and NFC intake, affected rumen fermentation by increasing butyrate proportion at the expense of propionate, and enhanced milk performance in primiparous early-lactation dairy cows.

The assessment of seed quality and physiological potential is essential in seed production and crop breeding. In the process of rapid detection of seed viability using tetrazolium (TZ) staining, it is necessary to spend a lot of labour and material resources to explore the pretreatment and staining methods of hard and solid seeds with physical barriers. This study explores the TZ staining methods of six hard seeds (Tilia miqueliana, Tilia henryana, Sassafras tzumu, Prunus subhirtella, Prunus sibirica, and Juglans mandshurica) and summarizes the TZ staining conditions required for hard seeds by combining the difference in fat content between seeds and the kinship between species, thus providing a rapid viability test method for the protection of germplasm resources of endangered plants and the optimization of seed bank construction. The TZ staining of six species of hard seeds requires a staining temperature above 35 °C and a TZ solution concentration higher than 1%. Endospermic seeds require shorter staining times than exalbuminous seeds. The higher the fat content of the seeds, the lower the required incubation temperature and TZ concentration for staining, and the longer the staining time. And the closer the relationship between the two species, the more similar their staining conditions become. The TZ staining method of similar species can be predicted according to the genetic distance between the phylogenetic trees, and the viability of new species can be detected quickly.

Most of the currently available three-degree-of-freedom manipulators are light load and cannot achieve full continuous rotation; given this, we designed a heavy-load manipulator that achieves unrestricted and continuous rotation. Due to manufacturing and assembly errors, parameter deviations between the real manipulator and its underlying theoretical model were unavoidable. Because of the lack of high-precision, high-frequency, and real-time closed-loop detection methods, we proposed a type of kinematics calibration of parameterized ant colony optimization and feedforward control methods. This was done to achieve high-precision motion control. First, an error model combining structural parameters and joint output angles was established, and the global sensitivity of each error source was analyzed to distinguish both primary and secondary sources. Based on the measured data of a laser tracker, the ant colony optimization was then used to identify six error sources. This resulted in both link length and joint driving errors of the designed manipulator. As it is a type of systematic error, the rounding error of the theoretical trajectory was carefully analyzed, and feedforward control methods with different coefficients were designed to further improve positioning accuracy based on the kinematic calibration. Experimental results showed that the proposed kinematic calibration and feedforward control methods achieved relatively precise motion control for the designed manipulator.

Adsorption desulfurization is a potential new method for deep desulfurization of fuel oil. The development of adsorbents with high adsorption capacity and selectivity is the core of deep adsorption desulfurization. The adsorption behavior of thiophene in MCM-41 mesoporous materials modified by various metal ions was studied in order to understand the adsorption desulfurization process of molecular sieves. The Fe-, Co-, and Zn-modified MCM-41 materials were prepared using a one-step in situ hydrothermal synthesis method. The modified MCM-41 molecular sieves maintained the mesoporous structure, and the metal ions had specific dispersion on the surface of the molecular sieves. Adsorption of thiophene on the surfaces of molecular sieves had both physical and chemical characteristics. The adsorption desulfurization performance of the modified molecular sieve was superior to that of the pure silica molecular sieve. In the simulated gasoline with sulfur content of 220 μg/g, when the amount of adsorbent used was 100 mg, the adsorptive desulfurization performance tended to be in equilibrium, and the optimum adsorption temperature was 30°C. Fe-MCM-41 and MCM-41 molecular sieves reached adsorption equilibrium after ~60 min, but the desulfurization rate of Co-MCM-41 and Zn-MCM-41 still increased slightly. The kinetic simulation results indicated that the pseudo-second-order kinetics adsorption model described well the adsorption process of thiophene on molecular sieves. The molecular sieve Fe-MCM-41 had the best desulfurization performance with an equilibrium adsorption capacity of 14.02 mg/g and the desulfurization rate was ~90%.