A high-energy pulsed vacuum ultraviolet (VUV) solid-state laser at 177 nm with high peak power by the sixth harmonic of a neodymium-doped yttrium aluminum garnet (Nd:YAG) amplifier in a KBe2BO3F2 prism-coupled device was demonstrated. The ultraviolet (UV) pump laser is a 352 ps pulsed, spatial top-hat super-Gaussian beam at 355 nm. A high energy of a 7.12 mJ VUV laser at 177 nm is obtained with a pulse width of 255 ps, indicating a peak power of 28 MW, and the conversion efficiency is 9.42% from 355 to 177 nm. The measured results fitted well with the theoretical prediction. It is the highest pulse energy and highest peak power ever reported in the VUV range for any solid-state lasers. The high-energy, high-peak-power, and high-spatial-uniformity VUV laser is of great interest for ultra-fine machining and particle-size measurements using UV in-line Fraunhofer holography diagnostics.

In this study, direct numerical simulation of the particle dispersion and turbulence modulation in a sonic transverse jet injected into a supersonic cross-flow with a Mach number of 2 was carried out with the Eulerian–Lagrangian point-particle method. One single-phase case and two particle-laden cases with different particle diameters were simulated. The jet and particle trajectories, the dispersion characteristics of particles, and the modulation effect of particles on the flow were investigated systematically. It was found that large particles primarily accumulate around shear layer structures situated on the windward side of the jet trajectory. In contrast, small particles exhibit radial transport, accessing both upstream and downstream recirculation zones. Moreover, small particles disperse extensively within the boundary layer and large-scale shear layers, evidently influenced by the streamwise vortices. The particles increase the mean wall-normal velocity near the wall in the wake region of the transverse jet, while reducing the mean streamwise and wall-normal velocities in outer regions. Particles significantly alter the flow velocity adjacent to shock fronts. In particular, the turbulent fluctuations near the windward barrel shock and bow shock are reduced, while those around the leeward barrel shock are increased. An upward displacement of the bow shock in the wall-normal direction is also observed due to particles. In the regions away from the shocks, small particles tend to amplify the Reynolds stress, while large particles attenuate the turbulent kinetic energy.

The material removal rate (MRR) serves as a crucial indicator in the chemical mechanical polishing (CMP) process of semiconductor wafers. Currently, the mainstream method to ascertain the MRR through offline measurements proves time inefficient and struggles to represent process variability accurately. An efficient MRR prediction model based on stacking ensemble learning that integrates models with disparate architectures was proposed in this study. First, the processing signals collected during wafer polishing, as available in the PHM2016 dataset, were analyzed and preprocessed to extract statistical and neighbor domain features. Subsequently, Pearson correlation coefficient analysis (PCCA) and principal component analysis (PCA) were employed to fuse the extracted features. Ultimately, random forest (RF), light gradient boosting machine (LightGBM), and backpropagation neural network (BPNN) with hyperparameters optimized by the Bayesian Optimization Algorithm were integrated to establish an MRR prediction model based on stacking ensemble learning. The developed model was verified on the PHM2016 benchmark test set, and a Mean Square Error (MSE) of 7.72 and a coefficient of determination (R2) of 95.82% were achieved. This indicates that the stacking ensemble learning based model, integrated with base models of disparate architectures, offers considerable potential for real-time MRR prediction in the CMP process of semiconductor wafers.

This study aims to evaluate the impact of low-carbohydrate diet, balanced dietary guidance and pharmacotherapy on weight loss among individuals with overweight or obesity over a period of 3 months. The study involves 339 individuals with overweight or obesity and received weight loss treatment at the Department of Clinical Nutrition at the Second Affiliated Hospital of Zhejiang University, School of Medicine, between 1 January 2020 and 31 December 2023. The primary outcome is the percentage weight loss. Among the studied patients, the majority chose low-carbohydrate diet as their primary treatment (168 (49·56 %)), followed by balanced dietary guidance (139 (41·00 %)) and pharmacotherapy (32 (9·44 %)). The total percentage weight loss for patients who were followed up for 1 month, 2 months and 3 months was 4·98 (3·04, 6·29) %, 7·93 (5·42, 7·93) % and 10·71 (7·74, 13·83) %, respectively. Multivariable logistic regression analysis identified low-carbohydrate diet as an independent factor associated with percentage weight loss of ≥ 3 % and ≥ 5 % at 1 month (OR = 0·461, P < 0·05; OR = 0·349, P < 0·001). The results showed that a low-carbohydrate diet was an effective weight loss strategy in the short term. However, its long-term effects were comparable to those observed with balanced dietary guidance and pharmacotherapy.

The associations between obesity and liver diseases are complex and diverse. To explore the causal relationships between obesity and liver diseases, we applied two-sample Mendelian randomisation (MR) and multivariable MR analysis. The data of exposures (BMI and WHRadjBMI) and outcomes (liver diseases and liver function biomarker) were obtained from the open genome-wide association study database. A two-sample MR study revealed that the genetically predicted BMI and WHRadjBMI were associated with non-alcoholic fatty liver disease, liver fibrosis and autoimmune hepatitis. Obesity was not associated with primary biliary cholangitis, liver failure, liver cell carcinoma, viral hepatitis and secondary malignant neoplasm of liver. A higher WHRadjBMI was associated with higher levels of biomarkers of lipid accumulation and metabolic disorders. These findings indicated independent causal roles of obesity in non-alcoholic fatty liver disease, liver fibrosis and impaired liver metabolic function rather than in viral or autoimmune liver disease.

Purple nutsedge (Cyperus rotundus L.) is one of the world’s resilient upland weeds, primarily spreading through its tubers. Its emergence in rice (Oryza sativa L.) fields has been increasing, likely due to changing paddy-farming practices. This study aimed to investigate how C. rotundus, an upland weed, can withstand soil flooding and become a problematic weed in rice fields. The first comparative analysis focused on the survival and recovery characteristics of growing and mature tubers of C. rotundus exposed to soil-flooding conditions. Notably, mature tubers exhibited significant survival and recovery abilities in these environments. Based on this observation, further investigation was carried out to explore the morphological structure, nonstructural carbohydrates, and respiratory mechanisms of mature tubers in response to prolonged soil flooding. Over time, the mature tubers did not form aerenchyma but instead gradually accumulated lignified sclerenchymal fibers, with lignin content also increasing. After 90 d, the lignified sclerenchymal fibers and lignin contents were 4.0 and 1.1 times higher than those in the no soil-flooding treatment. Concurrently, soluble sugar content decreased while starch content increased, providing energy storage, and alcohol dehydrogenase activity rose to support anaerobic respiration via alcohol fermentation. These results indicated that mature tubers survived in soil-flooding conditions by adopting a low-oxygen quiescence strategy, which involves morphological adaptations through the development of lignified sclerenchymal fibers, increased starch reserves for energy storage, and enhanced anaerobic respiration. This mechanism likely underpins the flooding tolerance of mature C. rotundus tubers, allowing them to endure unfavorable conditions and subsequently germinate and grow once flooding subsides. This study provides a preliminary explanation of the mechanism by which mature tubers of C. rotundus from the upland areas confer flooding tolerance, shedding light on the reasons behind this weed’s increasing presence in rice fields.

The influence of outer large-scale motions (LSMs) on near-wall structures in compressible turbulent channel flows is investigated. To separate the compressibility effects, velocity fluctuations are decomposed into solenoidal and dilatational components using the Helmholtz decomposition method. Solenoidal velocity fluctuations manifest as near-wall streaks and outer large-scale structures. The spanwise drifting of near-wall solenoidal streaks is found to be driven by the outer LSMs, while LSMs have a trivial influence on the spanwise density of solenoidal streaks, consistent with the outer LSM impacts found in incompressible flows (Zhou et al., J. Fluid Mech., vol. 940, 2022, p. A23). Dilatational motions are characterized by the near-wall small-scale travelling-wave packets and the large-scale parts in the outer region. The streamwise advection velocity of the near-wall structures remains at $16 \sim 18u_{\tau }$, hardly influenced by Mach numbers, Reynolds numbers and wall temperatures. The spanwise drifting of near-wall dilatational structures, quantified by the particle image velocimetry method, follows a mechanism distinct from solenoidal streaks. This drifting velocity is notably larger than those of the solenoidal streaks, and the influence of outer LSMs is not the primary trigger for this drifting.

The practical implementation of machine learning in flow control is limited due to its significant training expenses. In the present study the convolutional neural network (CNN) trained with the data of the restricted nonlinear (RNL) model is used to predict the normal velocity on a detection plane at $y^+=10$ in a turbulent channel flow, and the predicted velocity is used as wall blowing and suction for drag reduction. An active control test is carried out by using the well-trained CNN in direct numerical simulation (DNS). Substantial drag reduction rates up to 19 % and 16 % are obtained based on the spanwise and streamwise wall shear stresses, respectively. Furthermore, we explore the online control of wall turbulence by combining the RNL model with reinforcement learning (RL). The RL is constructed to determine the optimal wall blowing and suction based on its observation of the wall shear stresses without using the label data on the detection plane for training. The controlling and training processes are conducted synchronously in a RNL flow field. The control strategy discovered by RL has similar drag reduction rates with those obtained previously by the established method. Also, the training cost decreases by over thirty times at $Re_{\tau }=950$ compared with the DNS-RL model. The present results provide a perspective that combining the RNL model with machine learning control for drag reduction in wall turbulence can be effective and computationally economical. Also, this approach can be easily extended to flows at higher Reynolds numbers.

In mammals, the skin acts as a barrier to prevent harmful environmental stimuli from entering the circulation. CYP450s are involved in drug biotransformation, exogenous and endogenous substrate metabolism, and maintaining the normal physiological function of the skin, as well as facilitating homeostasis of the internal environment. The expression pattern of CYP450s in the skin is tissue-specific and thus differs from the liver and other organs. The development of skin topical medications, and knowledge of the toxicity and side effects of these medications require a detailed understanding of the expression and function of skin-specific CYP450s. Thus, we summarized the expression of CYP450s in the skin, their function in endogenous metabolic physiology, aberrant CYP450 expression in skin diseases and the influence of environmental variables and medications. This information will serve as a crucial foundation for future studies on the skin, as well as for the design and development of new drugs for skin diseases including topical medications.

Mythimna separata (Lepidoptera: Noctuidae) is an omnivorous pest that poses a great threat to food security. Insect antimicrobial peptides (AMPs) are small peptides that are important effector molecules of innate immunity. Here, we investigated the role of the AMP cecropin B in the growth, development, and immunity of M. separata. The gene encoding M. separata cecropin B (MscecropinB) was cloned. The expression of MscecropinB was determined in different developmental stages and tissues of M. separata. It was highest in the prepupal stage, followed by the pupal stage. Among larval stages, the highest expression was observed in the fourth instar. Tissue expression analysis of fourth instar larvae showed that MscecropinB was highly expressed in the fat body and haemolymph. An increase in population density led to upregulation of MscecropinB expression. MscecropinB expression was also upregulated by the infection of third and fourth instar M. separata with Beauveria bassiana or Bacillus thuringiensis (Bt). RNA interference (RNAi) targeting MscecropinB inhibited the emergence rate and fecundity of M. separata, and resulted in an increased sensitivity to B. bassiana and Bt. The mortality of M. separata larvae was significantly higher in pathogen plus RNAi-treated M. separata than in controls treated with pathogens only. Our findings indicate that MscecropinB functions in the eclosion and fecundity of M. separata and plays an important role in resistance to infection by B. bassiana and Bt.

The relationship between community and individual is the key issue in contemporary political philosophy and ethics. The concept of self seems very important for individualism, communitarianism and feminism when they respond to relationships, particularly when we have to situate selfhood in the conditions of modernity. Consequently, this paper can be divided into seven parts. First it introduces the debate about the concept of the self between individualism and communitarianism. Second, it discusses the feminist critique of this issue and analyses the feminist concept of self, and then addresses modernity as the condition of women. Next it attempts to analyze how women situate themselves in the conditions of modernity. Then it discusses how Chinese women are reshaping their selfhood under the conditions of modernity, and finally draws some brief conclusions claiming that neither communitarian nor individualist self is adequate in contemporary society. Chinese women, it is argued, are expected to reshape their own selfhood resting on the positive side of Confucian ethics and a feminist concept of self.

In order to establish a compact all-optical Thomson scattering source, experimental studies were conducted on the 45 TW Ti: sapphire laser facility. By including a steel wafer, mixed gas, and plasma mirror into a double-exit jet, several mechanisms, such as shock-assisted ionization injection, ionization injection, and driving laser reflection, were integrated into one source. So, the source of complexity was remarkably reduced. Electron bunches with central energy fluctuating from 90 to 160 MeV can be produced. Plasma mirrors were used to reflect the driving laser. The scattering of the reflected laser on the electron bunches led to the generation of X-ray photons. Through comparing the X-ray spots under different experimental conditions, it is confirmed that the X-ray photons are generated by Thomson scattering. For further application, the energy spectra and source size of the Thomson scattering source were measured. The unfolded spectrum contains a large amount of low-energy photons besides a peak near 67 keV. Through importing the electron energy spectrum into the Monte Carlo simulation code, the different contributions of the photons with small and large emitting angles can be used to explain the origin of the unfolded spectrum. The maximum photon energy extended to about 500 keV. The total photon production was 107/pulse. The FWHM source size was about 12 μm.

Fast neutron absorption spectroscopy is widely used in the study of nuclear structure and element analysis. However, due to the traditional neutron source pulse duration being of the order of nanoseconds, it is difficult to obtain a high-resolution absorption spectrum. Thus, we present a method of ultrahigh energy-resolution absorption spectroscopy via a high repetition rate, picosecond duration pulsed neutron source driven by a terawatt laser. The technology of single neutron count is used, which results in easily distinguishing the width of approximately 20 keV at 2 MeV and an asymmetric shape of the neutron absorption peak. The absorption spectroscopy based on a laser neutron source has one order of magnitude higher energy-resolution power than the state-of-the-art traditional neutron sources, which could be of benefit for precisely measuring nuclear structure data.

Purple nutsedge (Cyperus rotundus L.) is a globally distributed noxious weed that poses a significant challenge for control due to its fast and efficient propagation through the tuber, which is the primary reproductive organ. Gibberellic acid (GA3) has proven to be crucial for tuberization in tuberous plants. Therefore, understanding the relationship between GA3 and tuber development and propagation of C. rotundus will provide valuable information for controlling this weed. This study shows that the GA3 content decreases with tuber development, which corresponds to lower expression of bioactive GA3 synthesis genes (CrGA20ox, two CrGA3ox genes) and two upregulated GA3 catabolism genes (CrGA2ox genes), indicating that GA3 is involved in tuber development. Simultaneously, the expression of two CrDELLA genes and CrGID1 declines with tuber growth and decreased GA3, and yeast two-hybrid assays confirm that the GA3 signaling is DELLA-dependent. Furthermore, exogenous application of GA3 markedly reduces the number and the width of tubers and represses the growth of the tuber chain, further confirming the negative impact that GA3 has on tuber development and propagation. Taken together, these results demonstrate that GA3 is involved in tuber development and regulated by the DELLA-dependent pathway in C. rotundus and plays a negative role in tuber development and propagation.

Direct numerical simulations (DNSs) are performed to investigate the roughness effects on the statistical properties and the large-scale coherent structures in the turbulent channel flow over three-dimensional sinusoidal rough walls. The outer-layer similarities of mean streamwise velocity and Reynolds stresses are examined by systematically varying the roughness Reynolds number $k^{+}$ and the ratio of the roughness height to the half-channel height $k / \delta$. The energy transfer mechanism of turbulent motions in the presence of roughness elements with different sizes is explored through spectral analysis of the transport equation of the two-point velocity correlation and the scale-energy path display of the generalized Kolmogorov equation. The results show that, with increasing $k^+$, the downward shift of the mean streamwise velocity profile in the logarithmic region increases and the peak intensities of turbulent Reynolds stresses decrease. At an intermediate Reynolds number ($Re_{\tau }= 1080$), the length scale and intensity of the large-scale coherent structures increase for a small roughness ($k^{+}=10$), which leads to failure of the outer-layer similarity in rough-wall turbulence, and decrease for a large roughness ($k^{+}=60$), as compared with the smooth-wall case. The existence of the small roughness ($k^{+}=10$) enhances the mechanism of inverse energy cascade from the inner-layer small-scale structures to the outer-layer large-scale structures. Correspondingly, the self-sustaining processes of the outer-layer large-scale coherent structures, including turbulent production, interscale transport, pressure transport and spatial turbulent transport, are all enhanced, whereas the large roughness ($k^{+}=60$) weakens the energy transfer between the inner and outer regions.

Continuous risky decisions refer to decisions that involve trade-offs among options with persistent risks. People can use the probability of occurrence per unit time (e.g., ‘the probability of occurrence is 1% per month’) or the average time of risk occurrence (e.g., ‘the average occurrence time is 100 months’) to represent continuous risky options. In this study, we examined the effect of the presentation format (i.e., the probability of occurrence per unit time vs. the average time of risk occurrence) on continuous risky decisions in the gain domain and further explored the underlying mechanism. In Study 1 (N = 122), we demonstrated the effect of presentation format on continuous risky decisions and the moderating effect of the magnitude of probabilities. Specifically, when the probabilities were relatively low, compared with the probability of occurrence per unit time, using the average time of risk occurrence to present the continuous risky options led to more risk-averse decisions. However, when the probabilities were relatively high, compared with the probability of occurrence per unit time, the presentation format of the average time occurrence led to more risk-seeking decisions. In Study 2 (N = 136), we found that the moderating effect of the option probabilities on continuous risky decisions was mediated by the subjective attribute-wise difference judgment. In Study 3 (N = 221), we replicated the effect of presentation format on continuous risky decisions in more natural scenarios. The study offered a deep understanding of the mechanism of continuous risky decision-making, and the results were conducive to further developing theories in relevant fields.

Flexible cables in cable-driven parallel robots (CDPRs) are easy to be excited and vibrate. Cable vibration will react on the end-effector, causing attitude deviation of the end-effector. The main objective of this study is to accurately model axially moving flexible cables and characterize the dynamic behaviors of associated compliant CDPRs. Firstly, a model for transverse vibration of the axially moving length-variable cable is developed. On this basis, an original nonlinear dynamic model of the CDPRs able to capture the vibration of the cables and the dynamics of the end-effector is proposed. Secondly, the frequency–amplitude relationship of the CDPR is obtained. Moreover, the significance of the excitation effect caused by the axially moving length-variable cables is demonstrated, by comparing the results with and without excitation effect at different frequencies. It turns out that, as the oscillation frequency of the end-effector increases, the end-effector and cables exhibit the dynamics process from steady state to unstable large-amplitude vibration and finally to stable small-amplitude vibration. This indicates that the dynamics of the CDPR exhibit non-linear characteristics, due to the influence of flexible cables. Finally, the proposed dynamic model of compliant CDPRs is validated by experiments performed in the laboratory.