In the contemporary maritime industry, characterised by intense competition, reduced visibility due to heavy fog is a primary cause of accidents, significantly impairing maritime operational efficiency. Consequently, investigating foggy weather navigation safety holds crucial practical significance. This paper, through an analysis and synthesis of various aspects of foggy navigation technology, including foggy navigation regulations at different ports, fog warnings, foggy vessel environmental perception and foggy auxiliary navigation systems, explores the key issues concerning vessel navigation during foggy conditions from a scientific perspective. This discussion encompasses the aspects of regulatory frameworks, standardisation, and the development of intelligent and responsive onboard equipment. Finally, the paper offers a glimpse into potential strategies for fog navigation.

Fast neutron absorption spectroscopy is widely used in the study of nuclear structure and element analysis. However, due to the traditional neutron source pulse duration being of the order of nanoseconds, it is difficult to obtain a high-resolution absorption spectrum. Thus, we present a method of ultrahigh energy-resolution absorption spectroscopy via a high repetition rate, picosecond duration pulsed neutron source driven by a terawatt laser. The technology of single neutron count is used, which results in easily distinguishing the width of approximately 20 keV at 2 MeV and an asymmetric shape of the neutron absorption peak. The absorption spectroscopy based on a laser neutron source has one order of magnitude higher energy-resolution power than the state-of-the-art traditional neutron sources, which could be of benefit for precisely measuring nuclear structure data.

The Palaeo-Mesozoic geodynamic evolution of the Tangjia–Sumdo accretionary complex belt, which separates the North and South Lhasa Terrane, remains controversial. Moreover, the lack of geological records restricts the understanding of the evolution of the Sumdo Palaeo-Tethys Ocean from the middle Permian until the middle Triassic. Here we present zircon U–Pb geochronology, whole-rock geochemistry and Sr–Nd–Hf isotopic compositions of the Yeqing gabbro. Zircon U–Pb geochronology yields ages from 254 ± 1 to 249 ± 1 Ma. In situ Hf isotopic analyses yield ϵ Hf(t) values of −0.2 to +6.3. These samples have high TiO2 (3.69 wt %) and P2O5 (0.78 wt %) contents, with typical patterns like ocean island basalt (OIB). Besides, they are classified as high-Nb basalts (HNBs) based on the high content of Nb (45.3–113.5 ppm). Whole-rock Sr–Nd isotopic compositions are similar to OIB, with initial 87Sr/86Sr of 0.7047–0.7054, 143Nd/144Nd of 0.512526–0.512647 and ϵ Nd(t) of 0.3–2.7. These signatures suggest that the Yeqing gabbro is mainly derived from low-degree melting of the garnet lherzolite mantle. Based on field observations of HNBs intruding into the continental margin and their geochemical characteristics, we infer that the Yeqing gabbro was generated in a subduction environment. Combined with the regional geology of the subduction environment and the evolution of oceanic islands in the Sumdo Palaeo-Tethys Ocean, we propose that the Yeqing gabbro may represent a product of the asthenosphere upwelling through a slab window produced by subduction of seismic ridge in the Sumdo Palaeo-Tethys Ocean, called plume – subduction-zone interaction, during the late Permian to early Triassic.

The present study aimed to explore the association between dietary patterns in abdominal obesity obtained by reduced-rank regression (RRR) with visceral fat index (VFI) as a dependent variable and dyslipidemia in rural adults in Henan, China. A total of 29538 people aged 18–79 were selected from the Henan Rural Cohort Study. RRR analysis was used to identify dietary patterns; logistic regression analysis and restricted cubic spline regression models were applied to analyze the association between dietary patterns in abdominal obesity and dyslipidemia. VFI was used as a mediator to estimate the mediation effect. The dietary pattern in abdominal obesity was characterized by high carbohydrate and red meat intake and low consumption of fresh fruits, vegetables, milk, etc. After full adjustment, the highest quartile of dietary pattern scores was significantly associated with an increased risk of dyslipidemia (OR: 1·33, 95 % CI 1·23–1·44, P trend < 0·001), there was a non-linear dose–response relationship between them (P overall-association < 0·001, P non-lin-association = 0·022). The result was similar in dose-response between the dietary pattern scores and VFI. The indirect effect partially mediated by VFI was significant (OR: 1·07, 95 % CI 1·06–1·08). VIF explained approximately 53·3 % of odds of dyslipidemia related to the dietary pattern. Abdominal obesity dietary pattern scores positively affected VFI and dyslipidemia; there was a dose-response in both relationships. Dyslipidemia progression increased with higher abdominal obesity dietary pattern scores. In addition, VFI played a partial mediating role in relationship between abdominal obesity dietary pattern and dyslipidemia.

Poor utilisation efficiency of carbohydrate always leads to metabolic phenotypes in fish. The intestinal microbiota plays an important role in carbohydrate degradation. Whether the intestinal bacteria could alleviate high-carbohydrate diet (HCD)-induced metabolic phenotypes in fish remains unknown. Here, a strain affiliated to Bacillus amyloliquefaciens was isolated from the intestine of Nile tilapia. A basal diet (CON), HCD or HCD supplemented with B. amy SS1 (HCB) was used to feed fish for 10 weeks. The beneficial effects of B. amy SS1 on weight gain and protein accumulation were observed. Fasting glucose and lipid deposition were decreased in the HCB group compared with the HCD group. High-throughput sequencing showed that the abundance of acetate-producing bacteria was increased in the HCB group relative to the HCD group. Gas chromatographic analysis indicated that the concentration of intestinal acetate was increased dramatically in the HCB group compared with that in the HCD group. Glucagon-like peptide-1 was also increased in the intestine and serum of the HCB group. Thus, fish were fed with HCD, HCD supplemented with sodium acetate at 900 mg/kg (HLA), 1800 mg/kg (HMA) or 3600 mg/kg (HHA) diet for 8 weeks, and the HMA and HHA groups mirrored the effects of B. amy SS1. This study revealed that B. amy SS1 could alleviate the metabolic phenotypes caused by HCD by enriching acetate-producing bacteria in fish intestines. Regulating the intestinal microbiota and their metabolites might represent a powerful strategy for fish nutrition modulation and health maintenance in future.

The objective of this study was to analyze differences in birth weight and overweight/obesity in a Shanghai twin cohort. We also wanted to study their association and explore possible risk factors for the discordance of overweight/obesity within twins. This was an internal case–control study designed for twins. The 2012 Shanghai Twin Registration System baseline survey data of a total of 3417 twin pairs were statistically analyzed using SPSS22 software. Results show that the body mass index (BMI) of the Shanghai twin population increased with age. Twins with a high birth weight had a higher BMI and a higher rate of overweight and obesity; 0- to 6-year-old twins, male twins and dizygotic (DZ) twins had higher rates of overweight/obesity than other groups. The greater the discordant birth weight rate of twins, the more obvious the difference in BMI (p < .05). There was a significant difference in overweight/obesity between twins with a relative difference of birth weight ≥15% in DZ twins (p < .05). DZ twins, male twins and 0- to 6-year-old twins were more likely to be discordant in overweight/obese than others. The discordant birth weight within twins was not a risk factor for discordant overweight/obesity. However, attention should be paid to childhood obesity, and appropriate interventions should be made at the appropriate time. Genetics may play an important role in the occurrence and development of overweight/obesity. In conclusion, discordant growth and development in the uterus early in life may not lead to discordant weight development in the future.

The FNDC5 gene encodes the fibronectin type III domain-containing protein 5 that is a membrane protein mainly expressed in skeletal muscle, and the FNDC5 rs3480 polymorphism may be associated with liver disease severity in non-alcoholic fatty liver disease (NAFLD). We investigated the influence of the FNDC5 rs3480 polymorphism on the relationship between sarcopenia and the histological severity of NAFLD. A total of 370 adult individuals with biopsy-proven NAFLD were studied. The association between the key exposure sarcopenia and the outcome liver histological severity was investigated by binary logistic regression. Stratified analyses were undertaken to examine the impact of FNDC5 rs3480 polymorphism on the association between sarcopenia and the severity of NAFLD histology. Patients with sarcopenia had more severe histological grades of steatosis and a higher prevalence of significant fibrosis and definite non-alcoholic steatohepatitis than those without sarcopenia. There was a significant association between sarcopenia and significant fibrosis (adjusted OR 2·79, 95 % CI 1·31, 5·95, P = 0·008), independent of established risk factors and potential confounders. Among patients with sarcopenia, significant fibrosis occurred more frequently in the rs3480 AA genotype carriers than in those carrying the FNDC5 rs3480 G genotype (43·8 v. 17·2 %, P = 0·031). In the association between sarcopenia and liver fibrosis, there was a significant interaction between the FNDC5 genotype and sarcopenia status (P value for interaction = 0·006). Sarcopenia is independently associated with significant liver fibrosis, and the FNDC5 rs3480 G variant influences the association between sarcopenia and liver fibrosis in patients with biopsy-proven NAFLD.

Sugarcane brown rust, caused by Puccinia melanocephala, is one of the main diseases of sugarcane in China. The identification and discovery of new resistance genes have important theoretical and practical significance for preventing outbreaks of brown rust and ensuring the sustainable production of sugarcane. To screen for polymorphic simple-sequence repeat (SSR) molecular markers for localization of brown rust resistance genes, we used two populations that are suitable for genetic linkage map construction and mapping of new resistance genes to construct resistant and susceptible genetic pools. We then screened 449 pairs of primers to identify polymorphic SSR markers in the parental lines and the resistant/susceptible genetic pools. The results showed that 25 pairs of primers directed amplification of polymorphic DNA fragments between the parents of the cross combination ‘Yuetang 03-393’ × ‘ROC 24’, and 16 pairs of primers amplified polymorphic fragments between the parents of the cross combination ‘Liucheng 03-1137’ × ‘Dezhe 93-88’. Four pairs of primers (SMC236CG, SCESSR0928, SCESSR0636 and SCESSR2551) amplified polymorphic DNA fragments between the parental lines and the resistant/susceptible genetic pools in ‘Yuetang 03-393’ × ‘ROC 24’. The results of this study will establish a solid foundation for the mapping of new brown rust resistance genes, genetic linkage map construction and the development of closely-associated molecular markers in sugarcane.

We assessed inheritance of resistance to sugarcane brown rust (Puccinia melanocephala) in selfing F1 populations of wild sugarcane germplasm Erianthus rockii ‘Yundian 95-19’ and E. rockii ‘Yundian 95-20’. We tested parent and selfing F1 individuals for the brown rust resistance gene, Bru1, that has been shown to confer resistance to brown rust in sugarcane. The Bru1 gene was not detected in E. rockii ‘Yundian 95-19’, E. rockii ‘Yundian 95-20’ or their selfing F1 individuals, and we found there was segregation of resistance in the two selfing F1 populations (segregation ratio: 3:1). The results confirmed resistance in E. rockii ‘Yundian 95-19’ and E. rockii ‘Yundian 95-20’ to sugarcane brown rust is controlled by a novel, single dominant gene.

In this work, atomic layer deposition (ALD), as a novel strategy, has been applied to deposit MgO on nano-sized porous Si (pSi) dendrites obtained by etching Al–Si alloy for LIBs. The reversible specific capacity of pSi@MgO electrode is 969.4 mA h/g after 100 cycles at 100 mA/g between 0.01 and 1.5 V, and it presents the discharge specific capacities of 1253.0, 885.5, 642.4, 366.2, and 101.4 mA h/g at 100, 500, 1000, 2000, and 5000 mA/g, respectively. What is more, it delivers a high reversible capacity of 765.1 mA h/g even at 500 mA/g after 200 cycles. The performance improvement can be attributed to the protection of the MgO layer and built-in space of porous Si for volume expansion upon cycling. These results illustrate that ALD derived coating is a powerful strategy to enhance electrical properties of anode materials with huge volume change for lithium-ion batteries.

A coaxial-output rolled strip pulse-forming line (RSPFL) with a dry structure is researched for the purpose of miniaturization and all-solid state of pulse-forming lines (PFL). The coaxial-output RSPFL consists of a coaxial-output electrode (COE) and a rolled strip line (RSL). The COE is characterized by quasi-coaxial structure, making the output pulse propagate along the axial direction with a small output inductance. The RSL is rolled on the COE, whose transmission characteristics are analyzed theoretically. It shows that the RSL can be regarded as a planar strip line when the rolling radius of the strip line is larger than 60 times of the thickness of the insulation dielectric layer of RSL. CST modeling was carried out to simulate the discharging characteristic of the coaxial-output RSPFL. It shows that the coaxial-output RSPFL can deliver a discharging pulse with a rise time <6 ns when the impedance of the RSL matches that of the COE, which confirms the theoretical analysis. A prototype of the coaxial-output RSPFL was developed. A 49-kV discharging pulse on a matched load was achieved when it was charged to 100 kV. The discharging waveform has a pulse width of 32 ns, with a rise time of 6 ns, which is consistent with the simulation waveform. An energy-storage density of 1.9 J/L was realized in the coaxial-output RSPFL. By the method of multi-stage connection in series, a much higher output voltage is convenient to be obtained.

Babesiosis is an emerging tick-transmitted zoonosis prevalent in large parts of the world. This study was designed to determine the rates of Babesia microti infection among small rodents in Yunnan province, where human cases of babesiosis have been reported. Currently, distribution of Babesia in its endemic regions is largely unknown. In this study, we cataloged 1672 small wild rodents, comprising 4 orders, from nine areas in western Yunnan province between 2009 and 2011. Babesia microti DNA was detected by polymerase chain reaction in 4·3% (72/1672) of the rodents analyzed. The most frequently infected rodent species included Apodemus chevrieri and Niviventer fulvescens. Rodents from forests and shrublands had significantly higher Babesia infection rates. Genetic comparisons revealed that Babesia was most similar to the Kobe- and Otsu-type strains identified in Japan. A variety of rodent species might be involved in the enzootic maintenance and transmission of B. microti, supporting the need for further serological investigations in humans.

Vanadium oxide nanorods (VONRs) and vanadium oxide nanotubes (VONTs) were fabricated by hydrothermal method with the induction of hydroxyl and carboxyl functionalized carbon nanotubes (CNTs). The functionalized CNTs not only facilitate the dispersion of CNTs but also serve as centers for polymerization in the hydrothermal reaction. The formation of (VONRs) and (VONTs) was observed by field emission scanning electron microscopy, transmission electron microscopy, x-ray powder diffraction and Fourier transform infrared spectroscopy tests. Self-assembling nanotubes and nanorods were formed together with the layered structures, but they followed different formation mechanisms. The “Rolling” and “Attaching-Oriented Attachment Growth” mechanisms are proposed to describe the formation of VONRs and VONTs, respectively.