This study aimed to investigate the intake of dairy products during pregnancy in women with gestational diabetes mellitus (GDM) and its impacts on neonatal birth weight and pregnancy outcomes. A total of 386 women with GDM during the second trimester pregnancy participated in this prospective cohort study. We evaluated dairy products intake through the FFQ. Pregnancy outcomes were obtained from the delivery data. Participants were divided into insufficient and sufficient intake of milk and dairy products groups (< 300 g/d and ≥ 300 g/d, respectively). The average intake of dairy products during the second trimester pregnancy in women with GDM was 317·8 ± 179·5 g/d, and the total energy intake was 1635·4 ± 708·7 kcal/d. However, 76·68 % of them did not meet the recommended total energy intake of women with GDM. After adjusting for confounding factors, women with GDM who consumed ≥ 300 g/d of dairy products had an average reduction in birth weight of 93·1 g compared with women who consumed < 300 g/d of dairy products (95 % CI −171·343, −14·927). Women with GDM in sufficient intake group was also associated with lower risk of macrosomia (95 % CI 0·043, 0·695) and caesarean section (95 % CI 0·387, 0·933) and not related to low birth weight infant (95 % CI 0·617, 14·502) and preterm birth (95 % CI 0·186, 1·510) when compared with participants in insufficient intake group. Under the premise of insufficient total energy intake, the intake of dairy products during the second trimester pregnancy in women with GDM might be related to the decrease of neonatal birth weight.

Electron cyclotron resonance ion thrusters (ECRITs) have the potential to be used for space gravitational wave detection due to their wide thrust range. However, an unclear understanding of dynamic processes of ECRITs with strongly coupled multi-operating parameters limits further improvements on thrust noise and response velocity by feedback control systems. An integrative mathematical model considering the non-Maxwell electron energy distribution function for ECRITs is validated by experiments and used to study the influence of operating parameters on the dynamic processes of thrusters, which provides a new simplified grid model. Simulation results show the response processes with microwave (MW) power can be divided into two stages. The characteristic times of the first and second stages are respectively several microseconds and 10 ms, which are respectively dominated by plasma motion and the volume effect. The overshoot of screen grid (SG) current decreases, while its response time remains unchanged when the response time of MW power is prolonged. The response time of SG current with a step increase of flow rate is approximately 10 ms, consistent with the volume effect. The SG current decreases with rise of flow rate for high flow rate operations due to the small increment of ion density limited by low electron temperature, the decrease of ion Bohm velocity and reduction of sheath extraction area. The influence of grid voltage on the dynamic process of the SG current depends on variation ranges of extraction capabilities. When variations of sheath extraction area are limited, the response time is 5 μs, consistent with plasma response time. It is prolonged to 0.5 ms if sheath extraction area variations are large because they cause obvious variations of plasma parameters in the discharge chamber. These dynamic results can not only facilitate designing feedback controllers of micro-propulsion systems for high-precision space missions, but also provide guidance for ion sources to generate highly stable or rapid-response ion beam.

As a natural clay mineral, halloysite (Hal) possesses a distinctive nanotubular morphology and surface reactivity. Hal calcined at 750°C (Hal750°C; 0.0, 1.0, 2.0, 4.0, 6.0, 8.0 wt.%) was used to replace ground granulated blast furnace slag (GGBFS; 50.0, 49.5, 49.0, 48.0, 47.0, 46.0 wt.%) and fly ash (FA; 50.0, 49.5, 49.0, 48.0, 47.0, 46.0 wt.%) for the preparation of geopolymer in this study. The effects of the replacement ratio of Hal750°C on setting time, compressive strength, flexural strength, chemical composition and microstructure of the geopolymer were investigated. The results indicated that Hal750°C did not significantly alter the setting time. The active SiO2 and Al2O3 generated from Hal750°C participated in the geopolymerization, forming additional geopolymer gel phases (calcium (aluminate) silica hydrate and sodium aluminosilicate hydrate), improving the 28 day compressive strength of the geopolymers. When the amount of Hal750°C was 2.0 wt.%, the 28 day compressive strength of the ternary (GGBFS-FA-Hal750°C-based) geopolymer was 72.9 MPa, 34.8% higher than that of the geopolymer without the addition of Hal750°C. The special nanotubular morphology of residual Hal750°C mainly acted like reinforcing fibres, supplementing the flexural strength of the geopolymer. However, excessive Hal750°C addition (>4.0 wt.%) reduced compressive and flexural strength values due to the low degrees of geopolymerization and the porous microstructure in the ternary geopolymer. These findings demonstrate that the appropriate addition of Hal750°C improved the compressive strength of geopolymers prepared using GGBFS/FA, which provides essential data for future research and supports the utilization of low-value Hal-containing clays in geopolymer preparation.

Although dietary factors have been examined as potential risk factors for liver cancer, the evidence is still inconclusive. Using a diet-wide association analysis, our research evaluated the associations of 126 foods and nutrients on the risk of liver cancer in a Chinese population. We obtained the diet consumption of 72,680 women in the Shanghai Women’s Health Study using baseline dietary questionnaires. The association between each food and nutrient and liver cancer risk was quantified by Cox regression model. A false discovery rate of 0.05 was used to determine the foods and nutrients which need to be verified. Totally 256 incident liver cancer cases were identified in 1,267,391 person-years during the follow-up duration. At the statistical significance level (P ≤ 0.05), higher intakes of cooked wheaten foods, pear, grape and copper were inversely associated with liver cancer risk, while spinach, leafy vegetables, eggplant and carrots showed the positive associations. After considering multiple comparisons, no dietary variable was associated with liver cancer risk. Similar findings were seen in the stratification, secondary and sensitivity analyses. Our findings observed no significant association between dietary factors and liver cancer risk after considering multiple comparisons in Chinese women. More evidence is needed to explore the associations between diet and female liver cancer occurrence.

High prevalence of long COVID symptoms has emerged as a significant public health concern. This study investigated the associations between three doses of COVID-19 vaccines and the presence of any and ≥3 types of long COVID symptoms among people with a history of SARS-CoV-2 infection in Hong Kong, China. This is a secondary analysis of a cross-sectional online survey among Hong Kong adult residents conducted between June and August 2022. This analysis was based on a sub-sample of 1,542 participants with confirmed SARS-CoV-2 infection during the fifth wave of COVID-19 outbreak in Hong Kong (December 2021 to April 2022). Among the participants, 40.9% and 16.1% self-reported having any and ≥3 types of long COVID symptoms, respectively. After adjusting for significant variables related to sociodemographic characteristics, health conditions and lifestyles, and SARS-CoV-2 infection, receiving at least three doses of COVID-19 vaccines was associated with lower odds of reporting any long COVID symptoms comparing to receiving two doses (adjusted odds ratio [AOR]: 0.69, 95% CI: 0.54, 0.87, P = .002). Three doses of inactivated and mRNA vaccines had similar protective effects against long COVID symptoms. It is important to strengthen the coverage of COVID-19 vaccination booster doses, even in the post-pandemic era.

Mental health is deteriorating quickly and significantly globally post-COVID. Though there were already over 1 billion people living with mental disorders pre-pandemic, in the first year of COVID-19 alone, the prevalence of anxiety and depression soared by 25% worldwide. In light of the chronic shortages of mental health provider and resources, along with disruptions of available health services caused by the pandemic and COVID-related restrictions, technology is widely believed to hold the key to addressing rising mental health crises. However, hurdles such as fragmented and often suboptimal patient protection measures substantially undermine technology’s potential to address the global mental health crises effectively, reliably, and at scale. To shed light on these issues, this paper aims to discuss the post-pandemic challenges and opportunities the global community could leverage to improve society’s mental health en masse.

Timing of food intake is an emerging aspect of nutrition; however, there is a lack of research accurately assessing food timing in the context of the circadian system. The study aimed to investigate the relation between food timing relative to clock time and endogenous circadian timing with adiposity and further explore sex differences in these associations among 151 young adults aged 18–25 years. Participants wore wrist actigraphy and documented sleep and food schedules in real time for 7 consecutive days. Circadian timing was determined by dim-light melatonin onset (DLMO). The duration between last eating occasion and DLMO (last EO-DLMO) was used to calculate the circadian timing of food intake. Adiposity was assessed using bioelectrical impedance analysis. Of the 151 participants, 133 were included in the statistical analysis finally. The results demonstrated that associations of adiposity with food timing relative to circadian timing rather than clock time among young adults living in real-world settings. Sex-stratified analyses revealed that associations between last EO-DLMO and adiposity were significant in females but not males. For females, each hour increase in last EO-DLMO was associated with higher BMI by 0·51 kg/m2 (P = 0·01), higher percent body fat by 1·05 % (P = 0·007), higher fat mass by 0·99 kg (P = 0·01) and higher visceral fat area by 4·75 cm2 (P = 0·02), whereas non-significant associations were present among males. The findings highlight the importance of considering the timing of food intake relative to endogenous circadian timing instead of only as clock time.

Isolated multi-MeV $\gamma$-rays with attosecond duration, high collimation and beam angular momentum (BAM) may find many interesting applications in nuclear physics, astrophysics, etc. Here, we propose a scheme to generate such $\gamma$-rays via nonlinear Thomson scattering of a rotating relativistic electron sheet driven by a few-cycle twisted laser pulse interacting with a micro-droplet target. Our model clarifies the laser intensity threshold and carrier-envelope phase effect on the generation of the isolated electron sheet. Three-dimensional numerical simulations demonstrate the $\gamma$-ray emission with 320 attoseconds duration and peak brilliance of $9.3\times 10^{24}$ photons s${}^{-1}$ mrad${}^{-2}$ mm${}^{-2}$ per 0.1$\%$ bandwidth at 4.3 MeV. The $\gamma$-ray beam carries a large BAM of $2.8 \times 10^{16}\mathrm{\hslash}$, which arises from the efficient BAM transfer from the rotating electron sheet, subsequently leading to a unique angular distribution. This work should promote the experimental investigation of nonlinear Thomson scattering of rotating electron sheets in large laser facilities.

We aimed to evaluate the association of coffee consumption with different additives, including milk and/or sweetener (sugar and/or artificial sweetener), and different coffee types, with new-onset acute kidney injury (AKI), and examine the modifying effects of genetic variation in caffeine metabolism. 194 324 participants without AKI at baseline in the UK Biobank were included. The study outcome was new-onset AKI. During a median follow-up of 11·6 years, 5864 participants developed new-onset AKI. Compared with coffee non-consumers, a significantly lower risk of new-onset AKI was found in coffee consumers adding neither milk nor sugar to coffee (hazard ratio (HR), 0·86; 95 % CI, 0·78, 0·94) and adding only milk to coffee (HR,0·83; 95 % CI, 0·78, 0·89), but not in coffee consumers adding only sweetener (HR,1·14; 95 % CI, 0·99, 1·31) and both milk and sweetener to coffee (HR,0·96; 95 % CI, 0·89, 1·03). Moreover, there was a U-shaped association of coffee consumption with new-onset AKI, with the lowest risk at 2–3 drinks/d, in unsweetened coffee (no additives or milk only to coffee), but no association was found in sweetened coffee (sweetener only or both milk and sweetener to coffee). Genetic variation in caffeine metabolism did not significantly modify the association. A similar U-shaped association was found for instant, ground and decaffeinated coffee consumption in unsweetened coffee consumers, but not in sweetened coffee consumers. In conclusion, moderate consumption (2–3 drinks/d) of unsweetened coffee with or without milk was associated with a lower risk of new-onset AKI, irrespective of coffee type and genetic variation in caffeine metabolism.

Avoidable disasters are both saddening and baffling. In 2022, 159 people, mostly in their 20s, and 30s were crushed to death in Itaewon’s narrow alleyway amid South Korea’s first pandemic-restrictions-free Halloween celebration. What is particularly sobering about this tragedy is that although many people called police hotlines as crowds became cramped and static, their calls went unheeded for hours. Rather than order independent investigations into the catastrophe (as of January 2024), the President of South Korea at the time focused on superficial issues such as asking the public to refer to the disaster as an “accident” (which it was not, it was an avoidable disaster) and the casualties as “the dead” (who are casualties indeed, instead of victims of a preventable tragedy). In this paper, we examine how officials’ complacency about public health and safety dangers, ineffective disaster prevention, and preparedness systems, as well as the government’s chronic lack of prioritization of public health and safety may have contributed to the disaster. Furthermore, we discuss the importance of creating integrated public health and safety protection systems to prevent similar tragedies from happening.

The assessment of seed quality and physiological potential is essential in seed production and crop breeding. In the process of rapid detection of seed viability using tetrazolium (TZ) staining, it is necessary to spend a lot of labour and material resources to explore the pretreatment and staining methods of hard and solid seeds with physical barriers. This study explores the TZ staining methods of six hard seeds (Tilia miqueliana, Tilia henryana, Sassafras tzumu, Prunus subhirtella, Prunus sibirica, and Juglans mandshurica) and summarizes the TZ staining conditions required for hard seeds by combining the difference in fat content between seeds and the kinship between species, thus providing a rapid viability test method for the protection of germplasm resources of endangered plants and the optimization of seed bank construction. The TZ staining of six species of hard seeds requires a staining temperature above 35 °C and a TZ solution concentration higher than 1%. Endospermic seeds require shorter staining times than exalbuminous seeds. The higher the fat content of the seeds, the lower the required incubation temperature and TZ concentration for staining, and the longer the staining time. And the closer the relationship between the two species, the more similar their staining conditions become. The TZ staining method of similar species can be predicted according to the genetic distance between the phylogenetic trees, and the viability of new species can be detected quickly.

The numerical investigation focuses on the flow patterns around a rectangular cylinder with three aspect ratios ($L/D=5$, $10$, $15$) at a Reynolds number of $1000$. The study delves into the dynamics of vortices, their associated frequencies, the evolution of the boundary layer and the decay of the wake. Kelvin–Helmholtz (KH) vortices originate from the leading edge (LE) shear layer and transform into hairpin vortices. Specifically, at $L/D=5$, three KH vortices merge into a single LE vortex. However, at $L/D=10$ and $15$, two KH vortices combine to form a LE vortex, with the rapid formation of hairpin vortex packets. A fractional harmonic arises due to feedback from the split LE shear layer moving upstream, triggering interaction with the reverse flow. Trailing edge (TE) vortices shed, creating a Kármán-like street in the wake. The intensity of wake oscillation at $L/D=5$ surpasses that in the other two cases. Boundary layer transition occurs after the saturation of disturbance energy for $L/D=10$ and $15$, but not for $L/D=5$. The low-frequency disturbances are selected to generate streaks inside the boundary layer. The TE vortex shedding induces the formation of a favourable pressure gradient, accelerating the flow and fostering boundary layer relaminarization. The self-similarity of the velocity defect is observed in all three wakes, accompanied by the decay of disturbance energy. Importantly, the decrease in the shedding frequency of LE (TE) vortices significantly contributes to the overall decay of disturbance energy. This comprehensive exploration provides insights into complex flow phenomena and their underlying dynamics.

The domestication of rice increases the divergence between cultivated rice and its wild progenitor because of artificial selection. However, it remains unknown whether highly diverged loci in rice can be explained by neutral demographic scenarios alone. In this study, we genotyped 45 InDels (insertion/deletion) in two subspecies of Asian cultivated rice (Oryza sativa ssp. japonica and Oryza sativa ssp. indica) and their wild progenitor (O. rufipogon/O. nivara). Among them, 17 loci are highly diverged (FST > 0.4) between rice cultivars and their ancestor. We performed coalescent-based simulations on neutral demographic scenarios and found that neutral demography alone could explain the polymorphic profiles on those highly diverged loci between cultivated and wild rice. Therefore, more signatures of selection should be considered when detecting artificial selection in rice.

Adsorption desulfurization is a potential new method for deep desulfurization of fuel oil. The development of adsorbents with high adsorption capacity and selectivity is the core of deep adsorption desulfurization. The adsorption behavior of thiophene in MCM-41 mesoporous materials modified by various metal ions was studied in order to understand the adsorption desulfurization process of molecular sieves. The Fe-, Co-, and Zn-modified MCM-41 materials were prepared using a one-step in situ hydrothermal synthesis method. The modified MCM-41 molecular sieves maintained the mesoporous structure, and the metal ions had specific dispersion on the surface of the molecular sieves. Adsorption of thiophene on the surfaces of molecular sieves had both physical and chemical characteristics. The adsorption desulfurization performance of the modified molecular sieve was superior to that of the pure silica molecular sieve. In the simulated gasoline with sulfur content of 220 μg/g, when the amount of adsorbent used was 100 mg, the adsorptive desulfurization performance tended to be in equilibrium, and the optimum adsorption temperature was 30°C. Fe-MCM-41 and MCM-41 molecular sieves reached adsorption equilibrium after ~60 min, but the desulfurization rate of Co-MCM-41 and Zn-MCM-41 still increased slightly. The kinetic simulation results indicated that the pseudo-second-order kinetics adsorption model described well the adsorption process of thiophene on molecular sieves. The molecular sieve Fe-MCM-41 had the best desulfurization performance with an equilibrium adsorption capacity of 14.02 mg/g and the desulfurization rate was ~90%.

LongYan kaolin has a large Fe content which affects the coloring. Bioleaching treatments to remove Fe impurities were conducted here using indigenous dissimilatory Fe(III)-reducing bacteria. The factors that affect bioleaching efficiency include bioleaching time, carbon source, pH, temperature, pulp density, and inoculum density and these were examined. Environmental scanning electron microscopy and X-ray diffraction were used to examine any textural or mineralogical changes at the surface of the kaolin that may have occurred during the bioleaching. Iron impurities in the kaolin were reduced from 0.88% to 0.48% with an increase in the natural whiteness index from 60.8% to 81.5% after 7 days of bioleaching treatment. A granulometric analysis of dispersed kaolin demonstrated that the bioleaching resulted in a decrease in particle size. The results demonstrated that the bioleaching was very effective at improving the quality of the kaolin, where insoluble Fe(III), either adsorbed to the kaolin surfaces or admixed as amorphous forms, was leached out by micro-organisms as water-soluble Fe(II).

Salt solutions have complex effects on the swelling characteristics of compacted bentonite; these effects are caused by the inhibitory action of salinity and the ion-exchange reaction between the solution and bentonite. In order to characterize the swelling properties of compacted bentonite in a salt solution, swelling deformation tests were carried out for Gao-Miao-Zi (GMZ) bentonite specimens in NaCl and CaCl2 solutions. Swelling characteristics decreased with increasing salt concentration. Swelling strains in NaCl solution were larger than those in CaCl2 solution, even though the ionic concentration of 1.0 mol/L (M) NaCl solution is larger than that of 0.5 M CaCl2. According to the exchangeable cations tests, cation exchange was different for specimens immersed in different salt solutions. The swelling fractal model was used to predict the swelling strains of compacted bentonite in a concentrated salt solution. In this model, the effective stress incorporating osmotic suction was applied to take the effect of salinity into consideration, and the swelling coefficient, K, was employed to describe the swelling properties affected by the variation in exchangeable cations. In the model, fractal dimension was measured by nitrogen adsorption, and the salt solution had little effect on fractal dimension. K was estimated by the diffuse double layer (DDL) model for osmotic swelling in distilled water. Comparison of fractal model estimations with experimental data demonstrated that the new model performed well in predicting swelling characteristics affected by a salt solution.