The study aims were to present in vitro susceptibilities of clinical isolates from Gram-negative bacteria bloodstream infections (GNBSI) collected in China. GNBSI isolates were collected from 18 tertiary hospitals in 7 regions of China from 2018 to 2020. Minimum inhibitory concentrations were assessed using a Trek Diagnostic System. Susceptibility was determined using CLSI broth microdilution, and breakpoints were interpreted using CLSI M100 (2021). A total of 1,815 GNBSI strains were collected, with E. coli (42.4%) and Klebsiella pneumoniae (28.6%) being the most prevalent species, followed by P. aeruginosa (6.7%). Susceptibility analyses revealed low susceptibilities (<40%) of ESBL-producing E. coli and K. pneumonia to third-/fourth-generation cephalosporins, monobactamases, and fluoroquinolones. High susceptibilities to colistin (95.0%) and amikacin (81.3%) were found for K. pneumoniae, while Acinetobacter baumannii exhibited a high susceptibility (99.2%) to colistin but a low susceptibility to other antimicrobials (<27.5%). Isolates from ICUs displayed lower drug susceptibility rates of K. pneumoniae and A. baumannii than isolates from non-ICUs (all P < 0.05). Carbapenem-resistant and ESBL-producing K. pneumoniae detection was different across regions (both P < 0.05). E. coli and K. pneumoniae were major contributors to GNBSI, while A. baumannii exhibited severe drug resistance in isolates obtained from ICU departments.

Multilayer dielectric gratings (MLDGs) are crucial for pulse compression in picosecond–petawatt laser systems. Bulged nodular defects, embedded in coating stacks during multilayer deposition, influence the lithographic process and performance of the final MLDG products. In this study, the integration of nanosecond laser conditioning (NLC) into different manufacturing stages of MLDGs was proposed for the first time on multilayer dielectric films (MLDFs) and final grating products to improve laser-induced damage performance. The results suggest that the remaining nodular ejection pits introduced by the two protocols exhibit a high nanosecond laser damage resistance, which remains stable when the irradiated laser fluence is more than twice the nanosecond-laser-induced damage threshold (nanosecond-LIDT) of the unconditioned MLDGs. Furthermore, the picosecond-LIDT of the nodular ejection pit conditioned on the MLDFs was approximately 40% higher than that of the nodular defects, and the loss of the grating structure surrounding the nodular defects was avoided. Therefore, NLC is an effective strategy for improving the laser damage resistance of MLDGs.

Multilayer dielectric gratings typically remove multiple-grating pillars after picosecond laser irradiation; however, the dynamic formation process of the removal is still unclear. In this study, the damage morphologies of multilayer dielectric gratings induced by an 8.6-ps laser pulse were closely examined. The damage included the removal of a single grating pillar and consecutive adjacent grating pillars and did not involve the destruction of the internal high-reflection mirror structure. Comparative analysis of the two damage morphological characteristics indicated the removal of adjacent pillars was related to an impact process caused by the eruption of localized materials from the left-hand pillar, exerting impact pressure on its adjacent pillars and eventually resulting in multiple pillar removal. A finite-element strain model was used to calculate the stress distribution of the grating after impact. According to the electric field distribution, the eruptive pressure of the dielectric materials after ionization was also simulated. The results suggest that the eruptive pressure resulted in a stress concentration at the root of the adjacent pillar that was sufficient to cause damage, corresponding to the experimental removal of the adjacent pillar from the root. This study provides further understanding of the laser-induced damage behavior of grating pillars and some insights into reducing the undesirable damage process for practical applications.

Few studies have been conducted to investigate the association of kidney function decline with the trajectories of homocysteine (Hcy) over time, using repeated measurements. We aimed to investigate the association of kidney function with changes in plasma Hcy levels over time. Data were collected from the Rugao Longevity and Ageing Study. In detail, plasma Hcy and creatinine levels were measured in both waves (waves 2, 3 and 4) during the 3·5-year follow-up (n 1135). Wave 2 was regarded as the baseline survey. The estimated glomerular filtration rate (eGFR) was calculated based on creatinine. Subjects were categorised into four groups according to quartiles of eGFR at baseline. Linear mixed-effect models were used to investigate the association of eGFR with subsequent plasma Hcy levels. The mean eGFR at baseline was 90·84 (sd 11·42) ml/min per 1·73 m2. The mean plasma Hcy level was 14·09 (sd 6·82) at baseline and increased to 16·28 (sd 8·27) and 17·36 (sd 10·39) μmol/l during follow-ups. In the crude model, the interaction between time and eGFR at baseline was significant (β = −0·02, 95 % CI −0·02, −0·01, P = 0·002). After adjusting for confounding factors, a significant relationship remained (β = −0·02, 95 % CI −0·02, −0·01, P = 0·003), suggesting that kidney function decline at baseline was associated with a faster increase in Hcy levels. Kidney function decline is associated with a more pronounced increase in plasma Hcy levels. Further studies with longer follow-up periods and larger sample sizes are needed to validate our findings.

The split Hopkinson pressure bar (SHPB) was used to study the compressibility of shear thickening fluid (STF) at high deformation rate. In this study, a steel bulk was introduced into the SHPB system to confine and load the STF. A series of STFs with different particle types (SiO2 and PSt-EA) and volume fractions (63 vol.% and 65 vol.%) were tested and the results were compared. The reliability of the results was proved by repeating the tests and the force balance in suspension. The bulk modulus was used to evaluate the compressibility of STF, which indicated that the SiO2-based STF exhibited a larger compressibility than the PSt-EA-based STF. It was found that the bulk modulus increases with increasing of the strain rate and the volume fraction shows little effect on the bulk modulus. The structure-dependent mechanical property was analyzed and the loading effect of bulk modulus was considered to be originated from the interparticle clustering.

Fast linear transformer driver (FLTD) has some advantages in repetitive operation compared with traditional pulsed power generators. However, different types of gas switches applied in the field of pulsed power technology in recent years cannot reach the requirements of repetitive operation of FLTD. Therefore, the capability of repetitive operation of a multigap gas switch has been investigated in a circuit similar to the basic discharge loop named as brick in this paper. The switch has been triggered more than 2000 times and the distribution of delay time and switch jitter are analyzed and reported. Also, the self-breakdown voltages of the switch during different segments of the triggered breakdown experiment have been tested. The experimental results indicate that the delay time obeys the Gauss distribution and the jitter of 2000 times of discharge is about 2.3 ns.