In this study, a high-isolation multiple-input multiple-output (MIMO) microstrip patch antenna (MPA), which utilizes an orthogonal mode cancellation method is proposed. This method employs TM10 and TM01 modes, which are simultaneously excited in the rectangular passive MPA. Initially, a rectangular decoupling structure featuring polarization rotation characteristics is designed. Further studies show that by loading the polarization conversion parasitic structure (PCPS), the electric field of the spatial coupling wave can be transformed from the x-polarized TM10 mode to the y-polarized TM01 mode. Therefore, TM10 and TM01 modes from the excited antenna and decoupling structure are concurrently coupled to the passive antenna, forming an evident weak-field region on the passive antenna. Placing the feeding probe of the passive MPA within the weak-field region prevents signal reception at the port. Consequently, this results in an extremely low mutual coupling of −49 dB at a resonant frequency of 5.8 GHz. Finally, a prototype of the proposed antenna is fabricated and tested, and the measured results closely match the simulated results. Additionally, it is observed that PCPS slightly influences the performance of the MIMO antenna.

Widely distributed Mid-Neoproterozoic mafic rocks of the Qilian – Qaidam – East Kunlun region record the tectonic evolution of the northeastern Tibetan Plateau. This study presents whole-rock geochemistry, zircon U–Pb geochronology and Hf isotopes for the Xialanuoer gabbros of the central South Qilian Belt (SQB). Zircon laser ablation – inductively coupled plasma – mass spectrometry (LA-ICP-MS) U–Pb dating indicates that the gabbros were emplaced at ca. 738 Ma, indicating they are contemporaneous with mafic magmatism elsewhere in the northeastern Tibetan Plateau. The gabbros have low SiO2, Cr and Ni contents and Mg# values, are relatively enriched in light rare-earth elements (LREEs) and depleted in high-field-strength elements (HFSEs; e.g. Nb and Ta), have no positive Zr or Hf anomalies and have relatively high Nb/Ta but low Nb/La ratios. These data indicate that the Xialanuoer gabbros formed from calc-alkaline basaltic magmas that were originally generated by the partial melting of an enriched mantle of type-I (EMI-type) enriched region of the lithospheric mantle, underwent little to no crustal contamination prior to their emplacement, and have within-plate basalt geochemical affinities. Combining these data with the presence of widespread contemporaneous continental rift-related magmatism and sedimentation in the North Qilian, Central Qilian, South Qilian, Quanji, North Qaidam and East Kunlun regions suggests that the northeastern Tibetan Plateau underwent Mid-Neoproterozoic continental rifting, which also affected other Rodinian blocks (e.g. Tarim, South China, Australia, North America and Southern Africa).

A compact four-element ultra-wideband (UWB) multiple-input–multiple-output (MIMO) antenna with dual polarization and dual-notched capabilities was developed and fabricated. The MIMO antenna is composed of four orthogonally placed half-cutting UWB antenna elements. This orthogonal placement improves the isolation. Furthermore, an L-shaped slot and a continuous bending slot are etched to realize the band-rejection function in the WiMAX and WLAN bands. The result shows that the antenna achieved operating bands of 2.9–16.5 GHz (140.2%, S11 < −10 dB), fully covering the UWB (3.1–10.6 GHz). The port isolation is greater than 23 dB in the frequency band of interest, excluding two rejected bands. Moreover, the MIMO antenna has excellent diversity performance, such as a low envelope correlation coefficient (<0.004), high diversity gain (approximately 10 dB), and good omnidirectional radiation characteristics.

A single-layer ultra-wideband (UWB) stop-band frequency selective surface (FSS) has several advantages in wireless systems, including a simple design, low debugging complexity, and an appropriate thickness. This study proposes a miniaturized UWB stop-band FSS design. The proposed FSS structure consists of a square-loop and metalized vias that are arranged on a single layer substrate; it has an excellent angle and polarization-independent characteristics. At an incident angle of 60°, the polarization response frequencies of the transverse electric and magnetic modes only shifted by 0.003 f0 and 0.007 f0, respectively. The equivalent circuit models of the square-loop and metallized vias structure are analysed and the accuracy of the calculation is evaluated by comparing the electromagnetic simulation. The 20 × 20 array constitutes an FSS reflector with a unit size of 4.2 mm × 4.2 mm (less than one-twentieth of the wavelength of 3 GHz), which realizes an UWB quasi-constant gain enhancement (in-band flatness is <0.5 dB). Finally, the simulation results were verified through sample processing and measurement; consistent results were obtained. The FSS miniaturization design method proposed in this study could be applied to the design of passband FSS (complementary structure), antennas and filters, among other applications.

In this paper, a miniaturized tri-band bandpass microstrip filter using stub loaded rectangular ring resonator (SLRRR)，shorted stub loaded stepped impedance resonators (SSLSIR), and stepped impedance resonators (SIR) with sharp skirts is presented. Two SSLSIRs are embedded paralleled inside SLRRR to generate a quasi-elliptic response at second and third passband. The odd-even fundamental resonant mode and first high-order resonant mode of the SIRs are exploited to generate tri-band response. Three bandwidths can be controlled independently due to different signal paths. Extra transmission zeros are introduced by the configuration of 0° feed structure. Sharp skirts are achieved at the upper edge of each passband by λg/4 lines which are loaded at the I/O ports. An example of the proposed tri-band filter operating at 2.76 GHz/5.7 GHz/7.63 GHz for TDD-LTE/WLAN/VSAT applications is implemented and fabricated. The simulation and measurement show a good agreement.

In this study, a new ultra-wideband (UWB) band-edge selectivity antenna with a modified radiation slot using defected ground structure (DGS) is presented to obtain bandpass filtering reflection coefficient and gain performance. The well-designed DGS is designed on backside metallic of the substrate and can be seen as a low-pass filter that provides a good roll-off at a higher frequency. By connecting the DGS and the stepped slot and making them merge with each other, good cut-off property in the upper passband and better in-band impedance characteristics are obtained. Measured results show that the proposed design not only shows good band-edge selectivity in reflection coefficient and gain performance but also has a good impedance matching of −13.5 dB reflection coefficients and a good radiation efficiency of 90% in the operating frequencies. The measured bandwidth defined with the reflection coefficient less than −10 dB is from 3.1–11.2 GHz. Furthermore, the size of the filtering UWB antenna is 22 mm × 12 mm, which is smaller than many individual UWB antennas and UWB filters.

A compact reconfigurable filtering ultra-wideband (UWB) antenna with switchable band-notched functions is proposed. The basic structure of the proposed design is a filtering slot antenna with good band-edge selectivity using stepped impedance resonator feeding line. The reconfigurability is achieved by using two microstrip lines paralleling to the feeding line and two PIN diodes. The reconfigurable structure and bias circuit of the antenna are relatively simple and are not connected to the radiation structure, so they have little negative influence on the radiation characteristics of the antenna. Total four states could be achieved by using two PIN diodes to short the microstrip lines and ground. To verify the performance of the final design, multiple measured and simulated results in frequency and time domain are studied and analyzed. The measured results agreed very well with simulation. Compared with the traditional UWB antenna, the proposed antenna has advantages in size, filtering function in-band and out-of-band, and tunable states for multiple UWB applications.

In this paper, the design of a graded honeycomb radar absorbing structure (RAS) is presented to realize both a wide bandwidth and absorption over a wide range of angles. For both transverse-electric and transverse-magnetic polarization, a fractional bandwidth of more than 118.6% is achieved for at least a 10 dB reflectivity reduction when the incident angle is <45°, an 8 dB reduction when the incident angle is <55° and a 5 dB reduction when the incident angle is <70°. Meanwhile the 10 dB reduction upper angle limit is approximately 30° for the uniform coating honeycomb RAS in the literature, which loses its absorbing ability when the incident angle is larger than 55°. Furthermore, the total thickness of our design is 10.7 mm, which is only approximately 1.29 times that of the theoretical limitation. The good agreement between the calculated, simulated, and measured results demonstrates the validity of this optimization.

A compact printed reconfigurable monopole antenna with switchable band-notches is designed and manufactured. The proposed antenna mainly consists of a disc-like radiator with two pairs of T-shaped strips protruded inside a rectangular aperture. Five PIN diode switches are employed to bridge or open the slots, which allow the antenna to be configured into three different structures functioning as an ultra-wideband (UWB) antenna, or an antenna with notched frequencies at WLAN or WiMAX band. Design and optimization of the antenna are done using CST Microwave Studio. After fabrication on an FR4 substrate with dimensions of 35 mm (width) × 41 mm (length) × 1.5 mm (thickness), numerical and experimental results of the proposed reconfigurable antenna are presented and discussed. The experimental results confirm the design as a good candidate for UWB applications.

The effect of La2O3 substitutions on structure and dielectric properties of Bi2O3 –ZnO–Nb2O5-based ceramics was investigated. Bi1.5-xLaxZn0.5(Zn0.5Nb1.5)O7 samples were prepared by conventional ceramic processing technology. The crystal structure of the Bi1.5Zn0.5(Zn0.5Nb1.5)O7 sample was characterized as a pure cubic pyrochlore. With a lower amount of La2O3 substitution, the crystal structures were still cubic pyrochlore. Superlattice x-ray diffraction line was identified for some compositions. With the increasing amount of La2O3 substitution, the crystal structure gradually transformed from pure cubic pyrochlore to LaNbO4 phase. The dielectric properties regularly changed with the structure change. The structure-properties relations of the ceramics are discussed.

ZnTe/Zn1-xMnxTe superlattices were grown on GaAs (001) substrates by molecular beam epitaxy. The multi-phonon processes including overtones and combinations of optical phonons have been studied by near resonant Raman scattering in the temperature range 13 K to 300 K. The strain arising from lattice mismatch gives rise to a shift in the optical-phonon frequencies. A two-phonon interface mode of superlattice has been observed and identified for the first time. Strain-induced red shifts of exciton energies related to transitions from the conduction subband to the light-hole and heavy-hole subband have been found by photoreflectance measurements. Experimental results agree well with the calculated strain-induced shift in superlattices.